Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25979 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25877 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38253 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix crash in wacom_aes_battery_handler() Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended inactivity") introduced wacom_aes_battery_handler() which is scheduled as a delayed work (aes_battery_work). In wacom_remove(), aes_battery_work is not canceled. Consequently, if the device is removed while aes_battery_work is still pending, then hard crashes or "Oops: general protection fault..." are experienced when wacom_aes_battery_handler() is finally called. E.g., this happens with built-in USB devices after resume from hibernate when aes_battery_work was still pending at the time of hibernation. So, take care to cancel aes_battery_work in wacom_remove(). | ||||
| CVE-2025-38252 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix CPER handler device confusion By inspection, cxl_cper_handle_prot_err() is making a series of fragile assumptions that can lead to crashes: 1/ It assumes that endpoints identified in the record are a CXL-type-3 device, nothing guarantees that. 2/ It assumes that the device is bound to the cxl_pci driver, nothing guarantees that. 3/ Minor, it holds the device lock over the switch-port tracing for no reason as the trace is 100% generated from data in the record. Correct those by checking that the PCIe endpoint parents a cxl_memdev before assuming the format of the driver data, and move the lock to where it is required. Consequently this also makes the implementation ready for CXL accelerators that are not bound to cxl_pci. | ||||
| CVE-2025-38250 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix use-after-free in vhci_flush() syzbot reported use-after-free in vhci_flush() without repro. [0] From the splat, a thread close()d a vhci file descriptor while its device was being used by iotcl() on another thread. Once the last fd refcnt is released, vhci_release() calls hci_unregister_dev(), hci_free_dev(), and kfree() for struct vhci_data, which is set to hci_dev->dev->driver_data. The problem is that there is no synchronisation after unlinking hdev from hci_dev_list in hci_unregister_dev(). There might be another thread still accessing the hdev which was fetched before the unlink operation. We can use SRCU for such synchronisation. Let's run hci_dev_reset() under SRCU and wait for its completion in hci_unregister_dev(). Another option would be to restore hci_dev->destruct(), which was removed in commit 587ae086f6e4 ("Bluetooth: Remove unused hci-destruct cb"). However, this would not be a good solution, as we should not run hci_unregister_dev() while there are in-flight ioctl() requests, which could lead to another data-race KCSAN splat. Note that other drivers seem to have the same problem, for exmaple, virtbt_remove(). [0]: BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718 CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 skb_queue_purge include/linux/skbuff.h:3368 [inline] vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69 hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline] hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592 sock_do_ioctl+0xd9/0x300 net/socket.c:1190 sock_ioctl+0x576/0x790 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcf5b98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929 RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009 RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528 </TASK> Allocated by task 6535: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635 misc_open+0x2bc/0x330 drivers/char/misc.c:161 chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414 do_dentry_open+0xdf0/0x1970 fs/open.c:964 vfs_open+0x3b/0x340 fs/open.c:1094 do_open fs/namei.c:3887 [inline] path_openat+0x2ee5/0x3830 fs/name ---truncated--- | ||||
| CVE-2025-38248 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack ---truncated--- | ||||
| CVE-2025-38247 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: userns and mnt_idmap leak in open_tree_attr(2) Once want_mount_setattr() has returned a positive, it does require finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr() does not change that. As the result, we can end up leaking userns and possibly mnt_idmap as well. | ||||
| CVE-2025-38244 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when reconnecting channels Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order and prevent the following deadlock from happening ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3-build2+ #1301 Tainted: G S W ------------------------------------------------------ cifsd/6055 is trying to acquire lock: ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200 but task is already holding lock: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ret_buf->chan_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_setup_session+0x81/0x4b0 cifs_get_smb_ses+0x771/0x900 cifs_mount_get_session+0x7e/0x170 cifs_mount+0x92/0x2d0 cifs_smb3_do_mount+0x161/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&ret_buf->ses_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_match_super+0x101/0x320 sget+0xab/0x270 cifs_smb3_do_mount+0x1e0/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}: check_noncircular+0x95/0xc0 check_prev_add+0x115/0x2f0 validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_signal_cifsd_for_reconnect+0x134/0x200 __cifs_reconnect+0x8f/0x500 cifs_handle_standard+0x112/0x280 cifs_demultiplex_thread+0x64d/0xbc0 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: &tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ret_buf->chan_lock); lock(&ret_buf->ses_lock); lock(&ret_buf->chan_lock); lock(&tcp_ses->srv_lock); *** DEADLOCK *** 3 locks held by cifsd/6055: #0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200 #1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200 #2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 | ||||
| CVE-2025-38243 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid inode pointer dereferences during log replay In a few places where we call read_one_inode(), if we get a NULL pointer we end up jumping into an error path, or fallthrough in case of __add_inode_ref(), where we then do something like this: iput(&inode->vfs_inode); which results in an invalid inode pointer that triggers an invalid memory access, resulting in a crash. Fix this by making sure we don't do such dereferences. | ||||
| CVE-2025-38242 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: userfaultfd: fix race of userfaultfd_move and swap cache This commit fixes two kinds of races, they may have different results: Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same BUG_ON if the filemap lookup returned NULL and folio is added to swap cache after that. If another kind of race is triggered (folio changed after lookup) we may see RSS counter is corrupted: [ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_ANONPAGES val:-1 [ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_SHMEMPAGES val:1 Because the folio is being accounted to the wrong VMA. I'm not sure if there will be any data corruption though, seems no. The issues above are critical already. On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache lookup, and tries to move the found folio to the faulting vma. Currently, it relies on checking the PTE value to ensure that the moved folio still belongs to the src swap entry and that no new folio has been added to the swap cache, which turns out to be unreliable. While working and reviewing the swap table series with Barry, following existing races are observed and reproduced [1]: In the example below, move_pages_pte is moving src_pte to dst_pte, where src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the swap cache: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1 ... < interrupted> ... <swapin src_pte, alloc and use folio A> // folio A is a new allocated folio // and get installed into src_pte <frees swap entry S1> // src_pte now points to folio A, S1 // has swap count == 0, it can be freed // by folio_swap_swap or swap // allocator's reclaim. <try to swap out another folio B> // folio B is a folio in another VMA. <put folio B to swap cache using S1 > // S1 is freed, folio B can use it // for swap out with no problem. ... folio = filemap_get_folio(S1) // Got folio B here !!! ... < interrupted again> ... <swapin folio B and free S1> // Now S1 is free to be used again. <swapout src_pte & folio A using S1> // Now src_pte is a swap entry PTE // holding S1 again. folio_trylock(folio) move_swap_pte double_pt_lock is_pte_pages_stable // Check passed because src_pte == S1 folio_move_anon_rmap(...) // Moved invalid folio B here !!! The race window is very short and requires multiple collisions of multiple rare events, so it's very unlikely to happen, but with a deliberately constructed reproducer and increased time window, it can be reproduced easily. This can be fixed by checking if the folio returned by filemap is the valid swap cache folio after acquiring the folio lock. Another similar race is possible: filemap_get_folio may return NULL, but folio (A) could be swapped in and then swapped out again using the same swap entry after the lookup. In such a case, folio (A) may remain in the swap cache, so it must be moved too: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1, and S1 is not in swap cache folio = filemap_get ---truncated--- | ||||
| CVE-2025-38241 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix softlockup with mTHP swapin Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment] | ||||
| CVE-2025-38238 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to send ABTS for each of them. On send completion, this causes an attempt to free the same frame twice that leads to a crash. Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS logic accordingly. Tested by checking MDS for FDMI information. Tested by using instrumented driver to: - Drop PLOGI response - Drop RHBA response - Drop RPA response - Drop RHBA and RPA response - Drop PLOGI response + ABTS response - Drop RHBA response + ABTS response - Drop RPA response + ABTS response - Drop RHBA and RPA response + ABTS response for both of them | ||||
| CVE-2025-38235 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix "appletb_backlight" backlight device reference counting During appletb_kbd_probe, probe attempts to get the backlight device by name. When this happens backlight_device_get_by_name looks for a device in the backlight class which has name "appletb_backlight" and upon finding a match it increments the reference count for the device and returns it to the caller. However this reference is never released leading to a reference leak. Fix this by decrementing the backlight device reference count on removal via put_device and on probe failure. | ||||
| CVE-2025-38234 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/rt: Fix race in push_rt_task Overview ======== When a CPU chooses to call push_rt_task and picks a task to push to another CPU's runqueue then it will call find_lock_lowest_rq method which would take a double lock on both CPUs' runqueues. If one of the locks aren't readily available, it may lead to dropping the current runqueue lock and reacquiring both the locks at once. During this window it is possible that the task is already migrated and is running on some other CPU. These cases are already handled. However, if the task is migrated and has already been executed and another CPU is now trying to wake it up (ttwu) such that it is queued again on the runqeue (on_rq is 1) and also if the task was run by the same CPU, then the current checks will pass even though the task was migrated out and is no longer in the pushable tasks list. Crashes ======= This bug resulted in quite a few flavors of crashes triggering kernel panics with various crash signatures such as assert failures, page faults, null pointer dereferences, and queue corruption errors all coming from scheduler itself. Some of the crashes: -> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? pick_next_task_rt+0x6e/0x1d0 ? do_error_trap+0x64/0xa0 ? pick_next_task_rt+0x6e/0x1d0 ? exc_invalid_op+0x4c/0x60 ? pick_next_task_rt+0x6e/0x1d0 ? asm_exc_invalid_op+0x12/0x20 ? pick_next_task_rt+0x6e/0x1d0 __schedule+0x5cb/0x790 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: kernel NULL pointer dereference, address: 00000000000000c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? __warn+0x8a/0xe0 ? exc_page_fault+0x3d6/0x520 ? asm_exc_page_fault+0x1e/0x30 ? pick_next_task_rt+0xb5/0x1d0 ? pick_next_task_rt+0x8c/0x1d0 __schedule+0x583/0x7e0 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: unable to handle page fault for address: ffff9464daea5900 kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p)) -> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? dequeue_top_rt_rq+0xa2/0xb0 ? do_error_trap+0x64/0xa0 ? dequeue_top_rt_rq+0xa2/0xb0 ? exc_invalid_op+0x4c/0x60 ? dequeue_top_rt_rq+0xa2/0xb0 ? asm_exc_invalid_op+0x12/0x20 ? dequeue_top_rt_rq+0xa2/0xb0 dequeue_rt_entity+0x1f/0x70 dequeue_task_rt+0x2d/0x70 __schedule+0x1a8/0x7e0 ? blk_finish_plug+0x25/0x40 schedule+0x3c/0xb0 futex_wait_queue_me+0xb6/0x120 futex_wait+0xd9/0x240 do_futex+0x344/0xa90 ? get_mm_exe_file+0x30/0x60 ? audit_exe_compare+0x58/0x70 ? audit_filter_rules.constprop.26+0x65e/0x1220 __x64_sys_futex+0x148/0x1f0 do_syscall_64+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x62/0xc7 -> BUG: unable to handle page fault for address: ffff8cf3608bc2c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? spurious_kernel_fault+0x171/0x1c0 ? exc_page_fault+0x3b6/0x520 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? asm_exc_page_fault+0x1e/0x30 ? _cond_resched+0x15/0x30 ? futex_wait_queue_me+0xc8/0x120 ? futex_wait+0xd9/0x240 ? try_to_wake_up+0x1b8/0x490 ? futex_wake+0x78/0x160 ? do_futex+0xcd/0xa90 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? plist_del+0x6a/0xd0 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? dequeue_pushable_task+0x20/0x70 ? __schedule+0x382/0x7e0 ? asm_sysvec_reschedule_i ---truncated--- | ||||
| CVE-2025-38233 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc64/ftrace: fix clobbered r15 during livepatching While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is not restored in livepatch sequence leading to not so obvious fails like below: BUG: Unable to handle kernel data access on write at 0xc0000000000f9078 Faulting instruction address: 0xc0000000018ff958 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790 REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000 CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1 GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488 GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000 GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070 GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88 GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000 GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078 ... Call Trace: check_heap_object+0x34/0x390 (unreliable) __mutex_unlock_slowpath.isra.0+0xe4/0x230 seq_read_iter+0x430/0xa90 proc_reg_read_iter+0xa4/0x200 vfs_read+0x41c/0x510 ksys_read+0xa4/0x190 system_call_exception+0x1d0/0x440 system_call_vectored_common+0x15c/0x2ec Fix it by restoring r15 always. | ||||
| CVE-2025-38232 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: fix race between nfsd registration and exports_proc As of now nfsd calls create_proc_exports_entry() at start of init_nfsd and cleanup by remove_proc_entry() at last of exit_nfsd. Which causes kernel OOPs if there is race between below 2 operations: (i) exportfs -r (ii) mount -t nfsd none /proc/fs/nfsd for 5.4 kernel ARM64: CPU 1: el1_irq+0xbc/0x180 arch_counter_get_cntvct+0x14/0x18 running_clock+0xc/0x18 preempt_count_add+0x88/0x110 prep_new_page+0xb0/0x220 get_page_from_freelist+0x2d8/0x1778 __alloc_pages_nodemask+0x15c/0xef0 __vmalloc_node_range+0x28c/0x478 __vmalloc_node_flags_caller+0x8c/0xb0 kvmalloc_node+0x88/0xe0 nfsd_init_net+0x6c/0x108 [nfsd] ops_init+0x44/0x170 register_pernet_operations+0x114/0x270 register_pernet_subsys+0x34/0x50 init_nfsd+0xa8/0x718 [nfsd] do_one_initcall+0x54/0x2e0 CPU 2 : Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 PC is at : exports_net_open+0x50/0x68 [nfsd] Call trace: exports_net_open+0x50/0x68 [nfsd] exports_proc_open+0x2c/0x38 [nfsd] proc_reg_open+0xb8/0x198 do_dentry_open+0x1c4/0x418 vfs_open+0x38/0x48 path_openat+0x28c/0xf18 do_filp_open+0x70/0xe8 do_sys_open+0x154/0x248 Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu(). and same is happening on latest 6.14 kernel as well: [ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty ... [ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48 ... [ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4 ... [ 285.469695] Call trace: [ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P) [ 285.470488] seq_read+0xe0/0x11c [ 285.470675] proc_reg_read+0x9c/0xf0 [ 285.470874] vfs_read+0xc4/0x2fc [ 285.471057] ksys_read+0x6c/0xf4 [ 285.471231] __arm64_sys_read+0x1c/0x28 [ 285.471428] invoke_syscall+0x44/0x100 [ 285.471633] el0_svc_common.constprop.0+0x40/0xe0 [ 285.471870] do_el0_svc_compat+0x1c/0x34 [ 285.472073] el0_svc_compat+0x2c/0x80 [ 285.472265] el0t_32_sync_handler+0x90/0x140 [ 285.472473] el0t_32_sync+0x19c/0x1a0 [ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3) [ 285.473422] ---[ end trace 0000000000000000 ]--- It reproduced simply with below script: while [ 1 ] do /exportfs -r done & while [ 1 ] do insmod /nfsd.ko mount -t nfsd none /proc/fs/nfsd umount /proc/fs/nfsd rmmod nfsd done & So exporting interfaces to user space shall be done at last and cleanup at first place. With change there is no Kernel OOPs. | ||||
| CVE-2025-38228 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: imagination: fix a potential memory leak in e5010_probe() Add video_device_release() to release the memory allocated by video_device_alloc() if something goes wrong. | ||||
| CVE-2025-38224 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: kvaser_pciefd: refine error prone echo_skb_max handling logic echo_skb_max should define the supported upper limit of echo_skb[] allocated inside the netdevice's priv. The corresponding size value provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT which is 17. But later echo_skb_max is rounded up to the nearest power of two (for the max case, that would be 32) and the tx/ack indices calculated further during tx/rx may exceed the upper array boundary. Kasan reported this for the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit function has actually caught the same thing earlier. BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528 Read of size 8 at addr ffff888105e4f078 by task swapper/4/0 CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary) Call Trace: <IRQ> dump_stack_lvl lib/dump_stack.c:122 print_report mm/kasan/report.c:521 kasan_report mm/kasan/report.c:634 kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528 kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605 kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656 kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684 kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733 __handle_irq_event_percpu kernel/irq/handle.c:158 handle_irq_event kernel/irq/handle.c:210 handle_edge_irq kernel/irq/chip.c:833 __common_interrupt arch/x86/kernel/irq.c:296 common_interrupt arch/x86/kernel/irq.c:286 </IRQ> Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seq numbers' generation that's not the case - we're free to calculate them as would be more convenient, not taking tx max count into account. The only downside is that the size of echo_skb[] should correspond to the max seq number (not tx max count), so in some situations a bit more memory would be consumed than could be. Thus make the size of the underlying echo_skb[] sufficient for the rounded max tx value. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2025-38220 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly. | ||||
| CVE-2025-38217 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team. | ||||
| CVE-2025-38216 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Restore context entry setup order for aliased devices Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain") changed the context entry setup during domain attachment from a set-and-check policy to a clear-and-reset approach. This inadvertently introduced a regression affecting PCI aliased devices behind PCIe-to-PCI bridges. Specifically, keyboard and touchpad stopped working on several Apple Macbooks with below messages: kernel: platform pxa2xx-spi.3: Adding to iommu group 20 kernel: input: Apple SPI Keyboard as /devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 Fix this by restoring the previous context setup order. | ||||
| CVE-2025-38210 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs-tsm-report: Fix NULL dereference of tsm_ops Unlike sysfs, the lifetime of configfs objects is controlled by userspace. There is no mechanism for the kernel to find and delete all created config-items. Instead, the configfs-tsm-report mechanism has an expectation that tsm_unregister() can happen at any time and cause established config-item access to start failing. That expectation is not fully satisfied. While tsm_report_read(), tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail if tsm_ops have been unregistered, tsm_report_privlevel_store() tsm_report_provider_show() fail to check for ops registration. Add the missing checks for tsm_ops having been removed. Now, in supporting the ability for tsm_unregister() to always succeed, it leaves the problem of what to do with lingering config-items. The expectation is that the admin that arranges for the ->remove() (unbind) of the ${tsm_arch}-guest driver is also responsible for deletion of all open config-items. Until that deletion happens, ->probe() (reload / bind) of the ${tsm_arch}-guest driver fails. This allows for emergency shutdown / revocation of attestation interfaces, and requires coordinated restart. | ||||