Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (417953 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-98278 1 Linux 1 Linux Kernel 2026-10-06 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE() from the dev_fill_forward_path() loop check ipip_fill_forward_path() and ip6_tnl_fill_forward_path() look up the route to the tunnel's remote endpoint and set ctx->dev to its device, which is the tunnel itself when that route resolves back to the tunnel. dev_fill_forward_path() then makes no progress and trips WARN_ON_ONCE(last_dev == ctx->dev) as soon as a flowtable tries to offload a flow through the tunnel. That routing loop is a configuration any CAP_NET_ADMIN user can set up, and ip_tunnel_xmit() and ip6_tnl_xmit() already treat it as a tx error, so remove the warning and just fail the walk, as commit 008e7a7c293b ("net: remove WARN_ON_ONCE when accessing forward path array") did for the path stack overflow.
CVE-2026-98285 1 Linux 1 Linux Kernel 2026-10-06 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix bugs caused by switchdev deletion errors Allowing switchdev to prevent vlan deletion and error out in __vlan_del could cause multiple different issues - inconsistent state, memory leaks when flushing, NULL pointer dereference on bridge error when flushing. It doesn't make sense to allow it to stop __vlan_del, so log the error and continue with software vlan deletion. This is also consistent with 8021q behaviour.
CVE-2026-105572 2 Pickmall, Pickmall Lilishop 2 Lilishop, Pickmall Lilishop 2026-10-06 4.3 Medium
A vulnerability has been found in PickMall Lilishop up to 4.2.4. This affects an unknown function of the file /buyer/trade/receipt of the component Buyer Invoice List. Such manipulation of the argument memberId leads to authorization bypass. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
CVE-2026-98268 1 Linux 1 Linux Kernel 2026-10-06 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: perf: Fix null pointer access in is_include_guest_event() A typical module unload occurring event when there is an active perf connection leads to freeing of the pmu pointer. The call log is something like: .. __pmu_detach_event pmu_detach_event pmu_detach_events perf_pmu_unregister .. __pmu_detach_event() sets event->pmu to null. When the perf connection finally is closed, the following stack trace is observed: Oops: general protection fault, kernel NULL pointer dereference ... RIP: 0010:_free_event+0x3e/0x370 ... Call Trace: ... perf_event_release_kernel+0x260/0x2d0 perf_release+0x12/0x20 A call to mediated_pmu_unaccount_event() inside _free_event() is the root cause of this crash. Adding a check inside is_include_guest_event() ensures we don't accidentally access a null pmu ptr. In addition to this, we will now call mediated_pmu_unaccount_event() before clearing the pmu ptr so that nr_include_guest_events counts are maintained correctly.
CVE-2026-95140 2026-10-06 7.5 High
kkFileView v5.0.0 through v5.0.2 contains a directory traversal vulnerability in FileController.java. The fileUpload, createFolder and existsFile endpoints accept a "path" parameter that is concatenated into the upload base path without validation, allowing unauthenticated attackers to create arbitrary directories and write arbitrary files outside the intended fileDir root via a crafted multipart request
CVE-2026-98298 1 Linux 1 Linux Kernel 2026-10-06 7.0 High
In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg() In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist putting each entry into 'sg', but the entry length is read from 'sgl' (the list head) instead of 'sg' (the current entry): for_each_sg(sgl, sg, sg_len, i) { addr = sg_dma_address(sg); avail = sg_dma_len(sgl); /* should be 'sg' */ Consequently 'avail' is always the length of the first entry. For multi-sg lists this causes out-of-bounds reads when a later entry is shorter than the first, and silent data loss when it is longer. Single-sg or uniformly-sized lists happen to mask the issue.
CVE-2026-98312 1 Linux 1 Linux Kernel 2026-10-06 7.0 High
In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix OOB write from device-reported iso length usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as (actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where actual_length is the unsigned length the device reported for the matching IN packet. A packet completed with status 0 and actual_length < 4 wraps the subtraction to 0x7fffffec; a zero-length isochronous packet is legal on the bus, and the preceding loop rejects only non-zero status. The sum reaches memset() on out_urb->buffer, a 4832-byte object from kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB). Even without the wrap the result is out of bounds: at 88.2/96 kHz the 4-in/6-out scaling turns a full 420-byte IN packet into 628, so eight packets span 5024 bytes of that buffer. usb_submit_urb() rejects an over-long descriptor only after the memset() and the usb6fire_pcm_playback() copy of user PCM data have run. Guard the subtraction as the sibling usb6fire_pcm_capture() already does, and limit the frame count to what fits in rt->out_packet_size, the OUT endpoint's wMaxPacketSize. This bounds total_length by the buffer size while keeping each packet length aligned to a whole output frame. BUG: KASAN: out-of-bounds in usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338) Write of size 18446744073709551456 at addr ffff88802a3d0000 by task vhci_rx/5018 Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) __asan_memset (mm/kasan/shadow.c:84) usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741) vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107 drivers/usb/usbip/vhci_rx.c:242) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 10: __kmalloc_cache_noprof (mm/slub.c:5563) usb6fire_pcm_init (sound/usb/6fire/pcm.c:560 sound/usb/6fire/pcm.c:595) usb6fire_chip_probe (sound/usb/6fire/chip.c:133) usb_probe_interface (drivers/usb/core/driver.c:399) The buggy address belongs to the object at ffff88802a3d0000 which belongs to the cache kmalloc-8k of size 8192 The buggy address is located 0 bytes inside of 4832-byte region [ffff88802a3d0000, ffff88802a3d12e0) Kernel panic - not syncing: Fatal exception in interrupt
CVE-2026-66666 1 Automattic 1 Wordpress 2026-10-06 N/A
Insertion of Sensitive Information Into Sent Data vulnerability in Automattic WordPress allows Retrieve Embedded Sensitive Data. This issue affects WordPress: from 7.1 through 7.1.2, from 7.0 through 7.0.6, from 6.9 through 6.9.9, from 6.8 through 6.8.10, from 6.7 through 6.7.9, and from 6.6 through 6.6.9.
CVE-2026-98299 1 Linux 1 Linux Kernel 2026-10-06 7.0 High
In the Linux kernel, the following vulnerability has been resolved: tcp: do not let tcp_rmem be set below 4096 We can hit a division by zero crash in tcp_rcvbuf_grow() and tcp_rcv_space_adjust(): divide error: 0000 [#1] PREEMPT SMP RIP: 0010:tcp_rcvbuf_grow+0x187/0x450 net/ipv4/tcp_input.c:939 ... grow = div_u64(((u64)rcvwin << 1) * (newval - oldval), oldval); The division uses oldval = tp->rcvq_space.space as divisor. When tp->rcvq_space.space is zero, this leads to a divide-by-zero exception. tp->rcvq_space.space is initialized in tcp_init_buffer_space(): tp->rcvq_space.space = min3(tp->rcv_ssthresh, tp->rcv_wnd, (u32)TCP_INIT_CWND * tp->advmss); If tcp_rmem[1] is configured to very small values (such as 1), sk->sk_rcvbuf is initialized to 1. Then tcp_full_space(sk), which computes (sk->sk_rcvbuf * scaling_ratio) >> 8, truncates to 0. This sets tp->window_clamp = 0, tp->rcv_ssthresh = 0, and tp->rcvq_space.space = 0. Later, when data arrives and DRS is invoked, tcp_rcvbuf_grow() divides by oldval == 0. Back in 2015, commit b1cb59cf2efe ("net: sysctl_net_core: check SNDBUF and RCVBUF for min length") ensured that net.core.rmem_default and net.core.rmem_max cannot be set below SOCK_MIN_RCVBUF. Similarly, SO_RCVBUF setsockopt enforces max_t(int, val * 2, SOCK_MIN_RCVBUF). However, net.ipv4.tcp_rmem still had .extra1 = SYSCTL_ONE, allowing arbitrarily small values. Because SOCK_MIN_RCVBUF depends on sizeof(struct sk_buff) and cacheline alignment, its value varies across architectures and configuration options. Using a fixed constant of 4096 ensures a predictable, architecture- independent lower bound that is safely above SOCK_MIN_RCVBUF everywhere and matches the documented 4K default. Fix this by setting tcp_rmem.extra1 to 4096 and updating the documentation.
CVE-2026-98308 1 Linux 1 Linux Kernel 2026-10-06 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: trace PCM open only after assigning a stream Stream assignment can fail when hardware streams are exhausted. Move the tracepoint after the NULL check because its payload accesses the assigned stream tag. Detected by static analysis and reviewed with AI-assisted source auditing.
CVE-2026-105764 1 Immich-app 1 Immich 2026-10-06 N/A
Immich is a high-performance self-hosted photo and video management solution. Prior to 3.2.4, an authenticated non-admin user could upload SVG files that thumbnail-generation code in server/src/repositories/media.repository.ts passed to libvips. Files that bypassed libvips' native SVG loader fell through to ImageMagick, where attacker-controlled &lt;image href&gt; values reached unrestricted MSL and VIDEO coder operations. By storing one crafted asset and referencing its path from a second delayed-marker SVG, an attacker could execute code in the immich-server container when thumbnail processing ran. This issue is fixed in version 3.2.4.
CVE-2026-104914 1 Misp 1 Misp 2026-10-06 N/A
MISP contains an improper access control vulnerability in its attribute search and paginated attribute view endpoints. When a user queries for soft-deleted attributes (e.g., via the deleted-attributes search or the paginated attribute listing), the application returned soft-deleted attributes belonging to events owned by other organizations to any authenticated user who had visibility of the event. The event detail view correctly restricted soft-deleted attribute visibility to the owning organization and sync-permission users, but the attribute search and paginated view code paths lacked this restriction. Preconditions: - An authenticated MISP user with at least read access to an event owned by another organization. - The user issues a query for deleted attributes (search or paginated view with the deleted filter). Impact: - Confidentiality: Soft-deleted threat intelligence attributes (e.g., IOCs, indicators, context) from other organizations are disclosed to unauthorized users. This may expose sensitive intelligence that the owning organization intended to remove from general visibility. Affected versions: MISP versions prior to v2.5.48.
CVE-2026-77802 1 Progress 1 Telerik Fiddler Classic 2026-10-06 6.3 Medium
In Progress® Telerik® Fiddler® Classic for Windows, versions prior to v6.0.20262.10021, HTTP request smuggling is possible in the proxy request forwarding component. Requests containing multiple Content-Length headers with conflicting values are forwarded verbatim to the origin server, while Fiddler frames the request body using only the first Content-Length value. A local threat actor with low privileges who is able to send requests through the same Fiddler proxy instance as another user can exploit this desynchronization against a non-RFC-9110-compliant origin server that keeps the connection alive to smuggle an additional request. Because Fiddler returns the server connection to its pipe pool after reading only the first response, the unread smuggled response remains buffered on the socket and is served to the next session that reuses that connection, allowing the attacker to poison responses delivered to other users and to obtain responses intended for them.
CVE-2026-106026 1 Tftp-hpa Project 1 Tftp-hpa 2026-10-06 3.7 Low
tftp-hpa 5.4 before 6.0 contains an out-of-bounds read vulnerability in rewrite_string() in tftpd/remap.c that walks heap memory during jump label searches. Unauthenticated remote attackers can send read or write requests whose filename matches a remap jump rule to crash the forked in.tftpd request handler.
CVE-2026-105950 1 Getformwork 1 Formwork 2026-10-06 3.5 Low
A security vulnerability has been detected in getformwork formwork up to 2.3.12. Impacted is the function DomSanitizer::sanitizeNodeAttribute of the file formwork/src/Sanitizer/DomSanitizer.php of the component URI Sanitizer. Such manipulation of the argument formaction leads to cross site scripting. The attack may be launched remotely. Upgrading to version 2.3.13 is recommended to address this issue. The name of the patch is 729701e59c5886685c5a1d477bdc3035e41f18b1. Upgrading the affected component is advised.
CVE-2026-105919 1 Kusalkasilva 1 Learning-management-system 2026-10-06 7.3 High
A vulnerability was found in Kusalkasilva Learning-Management-System up to ffeb873f8803f1e9664384ff75000c7da45466d2. The affected element is the function mysql_query of the file admin/login.php of the component Administrator Login Endpoint. The manipulation of the argument username/password results in sql injection. The attack can be launched remotely. The exploit has been made public and could be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet.
CVE-2026-105438 1 O2oa 1 O2oa 2026-10-06 4.3 Medium
A flaw has been found in O2OA up to 10.0.1-ce. This affects the function ActionUploadExcelWithUrl of the file /x_general_assemble_control/jaxrs/excel/upload/with/url of the component General Module. Executing a manipulation of the argument fileUrl can lead to server-side request forgery. The attack can be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.
CVE-2026-105392 1 Lybbn 1 Django-vue-lyadmin 2026-10-06 7.3 High
A vulnerability has been found in Lybbn Django-Vue-Lyadmin up to 3.2.12. The impacted element is an unknown function of the file backend/application/settings.py of the component JWT Signing. The manipulation of the argument SECRET_KEY leads to use of hard-coded cryptographic key . Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The project maintainer explains: "The issue with this key is described in the documentation. Developers need to manually change their keys before deployment."
CVE-2026-105314 1 Papermerge 1 Papermerge 2026-10-06 7.5 High
Papermerge 3.5.3 allows remote code execution by a standard user via directory traversal in a /api/documents/upload call. A Python .pth file can be written to site-packages, and its code is executed upon the next start of the Python interpreter.
CVE-2026-94543 1 Vercel 1 Next.js 2026-10-06 5.3 Medium
Next.js is a React framework for building full-stack web applications. From 15.0.0 until 15.5.27 and 16.3.8, self-hosted applications using the Pages Router with statically generated or Incremental Static Regeneration pages can key a response cache entry without sufficiently binding it to the source route. A request can replace one page's cache entry with content from a different route, causing the affected page to serve incorrect content to every visitor until revalidation. Applications deployed on Vercel are not affected. This issue is fixed in versions 15.5.27 and 16.3.8.