Export limit exceeded: 26000 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26000 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26000 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50533 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mlme: fix null-ptr deref on failed assoc If association to an AP without a link 0 fails, then we crash in tracing because it assumes that either ap_mld_addr or link 0 BSS is valid, since we clear sdata->vif.valid_links and then don't add the ap_mld_addr to the struct. Since we clear also sdata->vif.cfg.ap_addr, keep a local copy of it and assign it earlier, before clearing valid_links, to fix this. | ||||
| CVE-2023-53620 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: fix soft lockup in status_resync status_resync() will calculate 'curr_resync - recovery_active' to show user a progress bar like following: [============>........] resync = 61.4% 'curr_resync' and 'recovery_active' is updated in md_do_sync(), and status_resync() can read them concurrently, hence it's possible that 'curr_resync - recovery_active' can overflow to a huge number. In this case status_resync() will be stuck in the loop to print a large amount of '=', which will end up soft lockup. Fix the problem by setting 'resync' to MD_RESYNC_ACTIVE in this case, this way resync in progress will be reported to user. | ||||
| CVE-2022-50536 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data In tcp_bpf_send_verdict() redirection, the eval variable is assigned to __SK_REDIRECT after the apply_bytes data is sent, if msg has more_data, sock_put() will be called multiple times. We should reset the eval variable to __SK_NONE every time more_data starts. This causes: IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7 ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110 Modules linked in: CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1 Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK> __tcp_transmit_skb+0xa1b/0xb90 ? __alloc_skb+0x8c/0x1a0 ? __kmalloc_node_track_caller+0x184/0x320 tcp_write_xmit+0x22a/0x1110 __tcp_push_pending_frames+0x32/0xf0 do_tcp_sendpages+0x62d/0x640 tcp_bpf_push+0xae/0x2c0 tcp_bpf_sendmsg_redir+0x260/0x410 ? preempt_count_add+0x70/0xa0 tcp_bpf_send_verdict+0x386/0x4b0 tcp_bpf_sendmsg+0x21b/0x3b0 sock_sendmsg+0x58/0x70 __sys_sendto+0xfa/0x170 ? xfd_validate_state+0x1d/0x80 ? switch_fpu_return+0x59/0xe0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-50544 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. | ||||
| CVE-2022-50555 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix a null-ptr-deref in tipc_topsrv_accept syzbot found a crash in tipc_topsrv_accept: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Workqueue: tipc_rcv tipc_topsrv_accept RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487 Call Trace: <TASK> tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 It was caused by srv->listener that might be set to null by tipc_topsrv_stop() in net .exit whereas it's still used in tipc_topsrv_accept() worker. srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to avoid the null-ptr-deref. To ensure the lsock is not released during the tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop() where it's waiting until the tipc_topsrv_accept worker to be done. Note that sk_callback_lock is used to protect sk->sk_user_data instead of srv->listener, and it should check srv in tipc_topsrv_listener_data_ready() instead. This also ensures that no more tipc_topsrv_accept worker will be started after tipc_conn_close() is called in tipc_topsrv_stop() where it sets sk->sk_user_data to null. | ||||
| CVE-2023-53635 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: fix wrong ct->timeout value (struct nf_conn)->timeout is an interval before the conntrack confirmed. After confirmed, it becomes a timestamp. It is observed that timeout of an unconfirmed conntrack: - Set by calling ctnetlink_change_timeout(). As a result, `nfct_time_stamp` was wrongly added to `ct->timeout` twice. - Get by calling ctnetlink_dump_timeout(). As a result, `nfct_time_stamp` was wrongly subtracted. Call Trace: <TASK> dump_stack_lvl ctnetlink_dump_timeout __ctnetlink_glue_build ctnetlink_glue_build __nfqnl_enqueue_packet nf_queue nf_hook_slow ip_mc_output ? __pfx_ip_finish_output ip_send_skb ? __pfx_dst_output udp_send_skb udp_sendmsg ? __pfx_ip_generic_getfrag sock_sendmsg Separate the 2 cases in: - Setting `ct->timeout` in __nf_ct_set_timeout(). - Getting `ct->timeout` in ctnetlink_dump_timeout(). Pablo appends: Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is set on, otherwise conntrack creation via ctnetlink breaks. Note that the problem described in this patch occurs since the introduction of the nfnetlink_queue conntrack support, select a sufficiently old Fixes: tag for -stable kernel to pick up this fix. | ||||
| CVE-2023-53639 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: reduce WARN to dev_dbg() in callback The warn is triggered on a known race condition, documented in the code above the test, that is correctly handled. Using WARN() hinders automated testing. Reducing severity. | ||||
| CVE-2022-50552 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0 | ||||
| CVE-2023-53629 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: dlm: fix use after free in midcomms commit While working on processing dlm message in softirq context I experienced the following KASAN use-after-free warning: [ 151.760477] ================================================================== [ 151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.763414] Read of size 4 at addr ffff88811a980c60 by task lock_torture/1347 [ 151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828 [ 151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+e5908aa2 04/01/2014 [ 151.768726] Call Trace: [ 151.769277] <TASK> [ 151.769748] dump_stack_lvl+0x5b/0x86 [ 151.770556] print_report+0x180/0x4c8 [ 151.771378] ? kasan_complete_mode_report_info+0x7c/0x1e0 [ 151.772241] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.773069] kasan_report+0x93/0x1a0 [ 151.773668] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.774514] __asan_load4+0x7e/0xa0 [ 151.775089] dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.775890] ? create_message.isra.29.constprop.64+0x57/0xc0 [ 151.776770] send_common+0x19f/0x1b0 [ 151.777342] ? remove_from_waiters+0x60/0x60 [ 151.778017] ? lock_downgrade+0x410/0x410 [ 151.778648] ? __this_cpu_preempt_check+0x13/0x20 [ 151.779421] ? rcu_lockdep_current_cpu_online+0x88/0xc0 [ 151.780292] _convert_lock+0x46/0x150 [ 151.780893] convert_lock+0x7b/0xc0 [ 151.781459] dlm_lock+0x3ac/0x580 [ 151.781993] ? 0xffffffffc0540000 [ 151.782522] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.783379] ? dlm_scan_rsbs+0xa70/0xa70 [ 151.784003] ? preempt_count_sub+0xd6/0x130 [ 151.784661] ? is_module_address+0x47/0x70 [ 151.785309] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.786166] ? 0xffffffffc0540000 [ 151.786693] ? lockdep_init_map_type+0xc3/0x360 [ 151.787414] ? 0xffffffffc0540000 [ 151.787947] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture] [ 151.789004] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.789858] ? 0xffffffffc0540000 [ 151.790392] ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture] [ 151.791347] ? delay_tsc+0x94/0xc0 [ 151.791898] torture_ex_iter+0xc3/0xea [dlm_locktorture] [ 151.792735] ? torture_start+0x30/0x30 [dlm_locktorture] [ 151.793606] lock_torture+0x177/0x270 [dlm_locktorture] [ 151.794448] ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture] [ 151.795539] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 151.796476] ? do_raw_spin_lock+0x11e/0x1e0 [ 151.797152] ? mark_held_locks+0x34/0xb0 [ 151.797784] ? _raw_spin_unlock_irqrestore+0x30/0x70 [ 151.798581] ? __kthread_parkme+0x79/0x110 [ 151.799246] ? trace_preempt_on+0x2a/0xf0 [ 151.799902] ? __kthread_parkme+0x79/0x110 [ 151.800579] ? preempt_count_sub+0xd6/0x130 [ 151.801271] ? __kasan_check_read+0x11/0x20 [ 151.801963] ? __kthread_parkme+0xec/0x110 [ 151.802630] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 151.803569] kthread+0x192/0x1d0 [ 151.804104] ? kthread_complete_and_exit+0x30/0x30 [ 151.804881] ret_from_fork+0x1f/0x30 [ 151.805480] </TASK> [ 151.806111] Allocated by task 1347: [ 151.806681] kasan_save_stack+0x26/0x50 [ 151.807308] kasan_set_track+0x25/0x30 [ 151.807920] kasan_save_alloc_info+0x1e/0x30 [ 151.808609] __kasan_slab_alloc+0x63/0x80 [ 151.809263] kmem_cache_alloc+0x1ad/0x830 [ 151.809916] dlm_allocate_mhandle+0x17/0x20 [ 151.810590] dlm_midcomms_get_mhandle+0x96/0x260 [ 151.811344] _create_message+0x95/0x180 [ 151.811994] create_message.isra.29.constprop.64+0x57/0xc0 [ 151.812880] send_common+0x129/0x1b0 [ 151.813467] _convert_lock+0x46/0x150 [ 151.814074] convert_lock+0x7b/0xc0 [ 151.814648] dlm_lock+0x3ac/0x580 [ 151.815199] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture] [ 151.816258] torture_ex_iter+0xc3/0xea [dlm_locktorture] [ 151.817129] lock_t ---truncated--- | ||||
| CVE-2023-53619 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: Avoid nf_ct_helper_hash uses after free If nf_conntrack_init_start() fails (for example due to a register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini() clean-up path frees the nf_ct_helper_hash map. When built with NF_CONNTRACK=y, further netfilter modules (e.g: netfilter_conntrack_ftp) can still be loaded and call nf_conntrack_helpers_register(), independently of whether nf_conntrack initialized correctly. This accesses the nf_ct_helper_hash dangling pointer and causes a uaf, possibly leading to random memory corruption. This patch guards nf_conntrack_helper_register() from accessing a freed or uninitialized nf_ct_helper_hash pointer and fixes possible uses-after-free when loading a conntrack module. | ||||
| CVE-2023-53633 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix a leak in map_user_pages() If get_user_pages_fast() allocates some pages but not as many as we wanted, then the current code leaks those pages. Call put_page() on the pages before returning. | ||||
| CVE-2023-53631 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-sysman: Fix reference leak If a duplicate attribute is found using kset_find_obj(), a reference to that attribute is returned. This means that we need to dispose it accordingly. Use kobject_put() to dispose the duplicate attribute in such a case. Compile-tested only. | ||||
| CVE-2023-53624 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_fq: fix integer overflow of "credit" if sch_fq is configured with "initial quantum" having values greater than INT_MAX, the first assignment of "credit" does signed integer overflow to a very negative value. In this situation, the syzkaller script provided by Cristoph triggers the CPU soft-lockup warning even with few sockets. It's not an infinite loop, but "credit" wasn't probably meant to be minus 2Gb for each new flow. Capping "initial quantum" to INT_MAX proved to fix the issue. v2: validation of "initial quantum" is done in fq_policy, instead of open coding in fq_change() _ suggested by Jakub Kicinski | ||||
| CVE-2022-50554 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: avoid double ->queue_rq() because of early timeout David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic. So far, it is driver's responsibility to cover the race between timeout and completion, so it seems supposed to be solved in driver in theory, given driver has enough knowledge. But it is really one common problem, lots of driver could have similar issue, and could be hard to fix all affected drivers, even it isn't easy for driver to handle the race. So David suggests this patch by draining in-progress ->queue_rq() for solving this issue. | ||||
| CVE-2023-53623 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix swap_info_struct race between swapoff and get_swap_pages() The si->lock must be held when deleting the si from the available list. Otherwise, another thread can re-add the si to the available list, which can lead to memory corruption. The only place we have found where this happens is in the swapoff path. This case can be described as below: core 0 core 1 swapoff del_from_avail_list(si) waiting try lock si->lock acquire swap_avail_lock and re-add si into swap_avail_head acquire si->lock but missing si already being added again, and continuing to clear SWP_WRITEOK, etc. It can be easily found that a massive warning messages can be triggered inside get_swap_pages() by some special cases, for example, we call madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile, run much swapon-swapoff operations (e.g. stress-ng-swap). However, in the worst case, panic can be caused by the above scene. In swapoff(), the memory used by si could be kept in swap_info[] after turning off a swap. This means memory corruption will not be caused immediately until allocated and reset for a new swap in the swapon path. A panic message caused: (with CONFIG_PLIST_DEBUG enabled) ------------[ cut here ]------------ top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70 Modules linked in: rfkill(E) crct10dif_ce(E)... CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+ Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) pc : plist_check_prev_next_node+0x50/0x70 lr : plist_check_prev_next_node+0x50/0x70 sp : ffff0018009d3c30 x29: ffff0018009d3c40 x28: ffff800011b32a98 x27: 0000000000000000 x26: ffff001803908000 x25: ffff8000128ea088 x24: ffff800011b32a48 x23: 0000000000000028 x22: ffff001800875c00 x21: ffff800010f9e520 x20: ffff001800875c00 x19: ffff001800fdc6e0 x18: 0000000000000030 x17: 0000000000000000 x16: 0000000000000000 x15: 0736076307640766 x14: 0730073007380731 x13: 0736076307640766 x12: 0730073007380731 x11: 000000000004058d x10: 0000000085a85b76 x9 : ffff8000101436e4 x8 : ffff800011c8ce08 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff0017df9ed338 x4 : 0000000000000001 x3 : ffff8017ce62a000 x2 : ffff0017df9ed340 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: plist_check_prev_next_node+0x50/0x70 plist_check_head+0x80/0xf0 plist_add+0x28/0x140 add_to_avail_list+0x9c/0xf0 _enable_swap_info+0x78/0xb4 __do_sys_swapon+0x918/0xa10 __arm64_sys_swapon+0x20/0x30 el0_svc_common+0x8c/0x220 do_el0_svc+0x2c/0x90 el0_svc+0x1c/0x30 el0_sync_handler+0xa8/0xb0 el0_sync+0x148/0x180 irq event stamp: 2082270 Now, si->lock locked before calling 'del_from_avail_list()' to make sure other thread see the si had been deleted and SWP_WRITEOK cleared together, will not reinsert again. This problem exists in versions after stable 5.10.y. | ||||
| CVE-2022-50550 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's. | ||||
| CVE-2023-53622 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix possible data races in gfs2_show_options() Some fields such as gt_logd_secs of the struct gfs2_tune are accessed without holding the lock gt_spin in gfs2_show_options(): val = sdp->sd_tune.gt_logd_secs; if (val != 30) seq_printf(s, ",commit=%d", val); And thus can cause data races when gfs2_show_options() and other functions such as gfs2_reconfigure() are concurrently executed: spin_lock(>->gt_spin); gt->gt_logd_secs = newargs->ar_commit; To fix these possible data races, the lock sdp->sd_tune.gt_spin is acquired before accessing the fields of gfs2_tune and released after these accesses. Further changes by Andreas: - Don't hold the spin lock over the seq_printf operations. | ||||
| CVE-2023-53618 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: reject invalid reloc tree root keys with stack dump [BUG] Syzbot reported a crash that an ASSERT() got triggered inside prepare_to_merge(). That ASSERT() makes sure the reloc tree is properly pointed back by its subvolume tree. [CAUSE] After more debugging output, it turns out we had an invalid reloc tree: BTRFS error (device loop1): reloc tree mismatch, root 8 has no reloc root, expect reloc root key (-8, 132, 8) gen 17 Note the above root key is (TREE_RELOC_OBJECTID, ROOT_ITEM, QUOTA_TREE_OBJECTID), meaning it's a reloc tree for quota tree. But reloc trees can only exist for subvolumes, as for non-subvolume trees, we just COW the involved tree block, no need to create a reloc tree since those tree blocks won't be shared with other trees. Only subvolumes tree can share tree blocks with other trees (thus they have BTRFS_ROOT_SHAREABLE flag). Thus this new debug output proves my previous assumption that corrupted on-disk data can trigger that ASSERT(). [FIX] Besides the dedicated fix and the graceful exit, also let tree-checker to check such root keys, to make sure reloc trees can only exist for subvolumes. | ||||
| CVE-2023-53621 | 1 Linux | 1 Linux Kernel | 2025-10-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memcontrol: ensure memcg acquired by id is properly set up In the eviction recency check, we attempt to retrieve the memcg to which the folio belonged when it was evicted, by the memcg id stored in the shadow entry. However, there is a chance that the retrieved memcg is not the original memcg that has been killed, but a new one which happens to have the same id. This is a somewhat unfortunate, but acceptable and rare inaccuracy in the heuristics. However, if we retrieve this new memcg between its allocation and when it is properly attached to the memcg hierarchy, we could run into the following NULL pointer exception during the memcg hierarchy traversal done in mem_cgroup_get_nr_swap_pages(): [ 155757.793456] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 155757.807568] #PF: supervisor read access in kernel mode [ 155757.818024] #PF: error_code(0x0000) - not-present page [ 155757.828482] PGD 401f77067 P4D 401f77067 PUD 401f76067 PMD 0 [ 155757.839985] Oops: 0000 [#1] SMP [ 155757.887870] RIP: 0010:mem_cgroup_get_nr_swap_pages+0x3d/0xb0 [ 155757.899377] Code: 29 19 4a 02 48 39 f9 74 63 48 8b 97 c0 00 00 00 48 8b b7 58 02 00 00 48 2b b7 c0 01 00 00 48 39 f0 48 0f 4d c6 48 39 d1 74 42 <48> 8b b2 c0 00 00 00 48 8b ba 58 02 00 00 48 2b ba c0 01 00 00 48 [ 155757.937125] RSP: 0018:ffffc9002ecdfbc8 EFLAGS: 00010286 [ 155757.947755] RAX: 00000000003a3b1c RBX: 000007ffffffffff RCX: ffff888280183000 [ 155757.962202] RDX: 0000000000000000 RSI: 0007ffffffffffff RDI: ffff888bbc2d1000 [ 155757.976648] RBP: 0000000000000001 R08: 000000000000000b R09: ffff888ad9cedba0 [ 155757.991094] R10: ffffea0039c07900 R11: 0000000000000010 R12: ffff888b23a7b000 [ 155758.005540] R13: 0000000000000000 R14: ffff888bbc2d1000 R15: 000007ffffc71354 [ 155758.019991] FS: 00007f6234c68640(0000) GS:ffff88903f9c0000(0000) knlGS:0000000000000000 [ 155758.036356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 155758.048023] CR2: 00000000000000c0 CR3: 0000000a83eb8004 CR4: 00000000007706e0 [ 155758.062473] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 155758.076924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 155758.091376] PKRU: 55555554 [ 155758.096957] Call Trace: [ 155758.102016] <TASK> [ 155758.106502] ? __die+0x78/0xc0 [ 155758.112793] ? page_fault_oops+0x286/0x380 [ 155758.121175] ? exc_page_fault+0x5d/0x110 [ 155758.129209] ? asm_exc_page_fault+0x22/0x30 [ 155758.137763] ? mem_cgroup_get_nr_swap_pages+0x3d/0xb0 [ 155758.148060] workingset_test_recent+0xda/0x1b0 [ 155758.157133] workingset_refault+0xca/0x1e0 [ 155758.165508] filemap_add_folio+0x4d/0x70 [ 155758.173538] page_cache_ra_unbounded+0xed/0x190 [ 155758.182919] page_cache_sync_ra+0xd6/0x1e0 [ 155758.191738] filemap_read+0x68d/0xdf0 [ 155758.199495] ? mlx5e_napi_poll+0x123/0x940 [ 155758.207981] ? __napi_schedule+0x55/0x90 [ 155758.216095] __x64_sys_pread64+0x1d6/0x2c0 [ 155758.224601] do_syscall_64+0x3d/0x80 [ 155758.232058] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 155758.242473] RIP: 0033:0x7f62c29153b5 [ 155758.249938] Code: e8 48 89 75 f0 89 7d f8 48 89 4d e0 e8 b4 e6 f7 ff 41 89 c0 4c 8b 55 e0 48 8b 55 e8 48 8b 75 f0 8b 7d f8 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 e7 e6 f7 ff 48 8b [ 155758.288005] RSP: 002b:00007f6234c5ffd0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 [ 155758.303474] RAX: ffffffffffffffda RBX: 00007f628c4e70c0 RCX: 00007f62c29153b5 [ 155758.318075] RDX: 000000000003c041 RSI: 00007f61d2986000 RDI: 0000000000000076 [ 155758.332678] RBP: 00007f6234c5fff0 R08: 0000000000000000 R09: 0000000064d5230c [ 155758.347452] R10: 000000000027d450 R11: 0000000000000293 R12: 000000000003c041 [ 155758.362044] R13: 00007f61d2986000 R14: 00007f629e11b060 R15: 000000000027d450 [ 155758.376661] </TASK> This patch fixes the issue by moving the memcg's id publication from the alloc stage to ---truncated--- | ||||
| CVE-2023-53637 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov772x: Fix memleak in ov772x_probe() A memory leak was reported when testing ov772x with bpf mock device: AssertionError: unreferenced object 0xffff888109afa7a8 (size 8): comm "python3", pid 279, jiffies 4294805921 (age 20.681s) hex dump (first 8 bytes): 80 22 88 15 81 88 ff ff ."...... backtrace: [<000000009990b438>] __kmalloc_node+0x44/0x1b0 [<000000009e32f7d7>] kvmalloc_node+0x34/0x180 [<00000000faf48134>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev] [<00000000da376937>] ov772x_probe+0x1c3/0x68c [ov772x] [<000000003f0d225e>] i2c_device_probe+0x28d/0x680 [<00000000e0b6db89>] really_probe+0x17c/0x3f0 [<000000001b19fcee>] __driver_probe_device+0xe3/0x170 [<0000000048370519>] driver_probe_device+0x49/0x120 [<000000005ead07a0>] __device_attach_driver+0xf7/0x150 [<0000000043f452b8>] bus_for_each_drv+0x114/0x180 [<00000000358e5596>] __device_attach+0x1e5/0x2d0 [<0000000043f83c5d>] bus_probe_device+0x126/0x140 [<00000000ee0f3046>] device_add+0x810/0x1130 [<00000000e0278184>] i2c_new_client_device+0x359/0x4f0 [<0000000070baf34f>] of_i2c_register_device+0xf1/0x110 [<00000000a9f2159d>] of_i2c_notify+0x100/0x160 unreferenced object 0xffff888119825c00 (size 256): comm "python3", pid 279, jiffies 4294805921 (age 20.681s) hex dump (first 32 bytes): 00 b4 a5 17 81 88 ff ff 00 5e 82 19 81 88 ff ff .........^...... 10 5c 82 19 81 88 ff ff 10 5c 82 19 81 88 ff ff .\.......\...... backtrace: [<000000009990b438>] __kmalloc_node+0x44/0x1b0 [<000000009e32f7d7>] kvmalloc_node+0x34/0x180 [<0000000073d88e0b>] v4l2_ctrl_new.cold+0x19b/0x86f [videodev] [<00000000b1f576fb>] v4l2_ctrl_new_std+0x16f/0x210 [videodev] [<00000000caf7ac99>] ov772x_probe+0x1fa/0x68c [ov772x] [<000000003f0d225e>] i2c_device_probe+0x28d/0x680 [<00000000e0b6db89>] really_probe+0x17c/0x3f0 [<000000001b19fcee>] __driver_probe_device+0xe3/0x170 [<0000000048370519>] driver_probe_device+0x49/0x120 [<000000005ead07a0>] __device_attach_driver+0xf7/0x150 [<0000000043f452b8>] bus_for_each_drv+0x114/0x180 [<00000000358e5596>] __device_attach+0x1e5/0x2d0 [<0000000043f83c5d>] bus_probe_device+0x126/0x140 [<00000000ee0f3046>] device_add+0x810/0x1130 [<00000000e0278184>] i2c_new_client_device+0x359/0x4f0 [<0000000070baf34f>] of_i2c_register_device+0xf1/0x110 The reason is that if priv->hdl.error is set, ov772x_probe() jumps to the error_mutex_destroy without doing v4l2_ctrl_handler_free(), and all resources allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() are leaked. | ||||