Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417953 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46024 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply() If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both protocol and result, this is currently not treated as an error. In case of ac->negotiating == true and ac->protocol > 0, this leads to setting ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for ac->protocol != protocol returns false, and init_protocol() is not called. Subsequently, ac->ops->handle_reply() is called, which leads to a null pointer dereference, because ac->ops is still NULL. This patch changes the check for ac->protocol != protocol to !ac->protocol, as this also includes the case when the protocol was set to zero in the message. This causes the message to be treated as containing a bad auth protocol. | ||||
| CVE-2026-45991 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: udf: fix partition descriptor append bookkeeping Mounting a crafted UDF image with repeated partition descriptors can trigger a heap out-of-bounds write in part_descs_loc[]. handle_partition_descriptor() deduplicates entries by partition number, but appended slots never record partnum. As a result duplicate Partition Descriptors are appended repeatedly and num_part_descs keeps growing. Once the table is full, the growth path still sizes the allocation from partnum even though inserts are indexed by num_part_descs. If partnum is already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep the old capacity and the next append writes past the end of the table. Store partnum in the appended slot and size growth from the next append count so deduplication and capacity tracking follow the same model. | ||||
| CVE-2026-45984 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] | ||||
| CVE-2026-45972 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF and double free in smb2_open_file() Zero out @err_iov and @err_buftype before retrying SMB2_open() to prevent an UAF bug if @data != NULL, otherwise a double free. | ||||
| CVE-2026-45970 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix UAF in rlb_arp_recv during bond up/down The ALB RX path may access rx_hashtbl concurrently with bond teardown. During rapid bond up/down cycles, rlb_deinitialize() frees rx_hashtbl while RX handlers are still running, leading to a null pointer dereference detected by KASAN. However, the root cause is that rlb_arp_recv() can still be accessed after setting recv_probe to NULL, which is actually a use-after-free (UAF) issue. That is the reason for using the referenced commit in the Fixes tag. [ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI [ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] [ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary) [ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022 [ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding] [ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00 [ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206 [ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e [ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8 [ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8 [ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119 [ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810 [ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000 [ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0 [ 214.310347] Call Trace: [ 214.313070] <IRQ> [ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding] [ 214.320975] bond_handle_frame+0x166/0xb60 [bonding] [ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] [ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710 [ 214.339199] ? __pfx_arp_process+0x10/0x10 [ 214.343775] ? sched_balance_find_src_group+0x98/0x630 [ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10 [ 214.356513] ? arp_rcv+0x307/0x690 [ 214.360311] ? __pfx_arp_rcv+0x10/0x10 [ 214.364499] ? __lock_acquire+0x58c/0xbd0 [ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0 [ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 214.380743] ? lock_acquire+0x10b/0x140 [ 214.385026] process_backlog+0x3f1/0x13a0 [ 214.389502] ? process_backlog+0x3aa/0x13a0 [ 214.394174] __napi_poll.constprop.0+0x9f/0x370 [ 214.399233] net_rx_action+0x8c1/0xe60 [ 214.403423] ? __pfx_net_rx_action+0x10/0x10 [ 214.408193] ? lock_acquire.part.0+0xbd/0x260 [ 214.413058] ? sched_clock_cpu+0x6c/0x540 [ 214.417540] ? mark_held_locks+0x40/0x70 [ 214.421920] handle_softirqs+0x1fd/0x860 [ 214.426302] ? __pfx_handle_softirqs+0x10/0x10 [ 214.431264] ? __neigh_event_send+0x2d6/0xf50 [ 214.436131] do_softirq+0xb1/0xf0 [ 214.439830] </IRQ> The issue is reproducible by repeatedly running ip link set bond0 up/down while receiving ARP messages, where rlb_arp_recv() can race with rlb_deinitialize() and dereference a freed rx_hashtbl entry. Fix this by setting recv_probe to NULL and then calling synchronize_net() to wait for any concurrent RX processing to finish. This ensures that no RX handler can access rx_hashtbl after it is freed in bond_alb_deinitialize(). | ||||
| CVE-2026-45945 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix race condition during PASID entry replacement The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing an active PASID entry (e.g., during domain replacement), the current implementation calculates a new entry on the stack and copies it to the table using a single structure assignment. struct pasid_entry *pte, new_pte; pte = intel_pasid_get_entry(dev, pasid); pasid_pte_config_first_level(iommu, &new_pte, ...); *pte = new_pte; Because the hardware may fetch the 512-bit PASID entry in multiple 128-bit chunks, updating the entire entry while it is active (Present bit set) risks a "torn" read. In this scenario, the IOMMU hardware could observe an inconsistent state — partially new data and partially old data — leading to unpredictable behavior or spurious faults. Fix this by removing the unsafe "replace" helpers and following the "clear-then-update" flow, which ensures the Present bit is cleared and the required invalidation handshake is completed before the new configuration is applied. | ||||
| CVE-2026-45910 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use. | ||||
| CVE-2026-45898 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix workqueue list corruption by removing work_list The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()") changed the work submission logic to unconditionally call queue_work() with the expectation that queue_work() would have no effect if work was already pending. The problem is that a free list of struct iwcm_work is used (for which struct work_struct is embedded), so each call to queue_work() is basically unique and therefore does indeed queue the work. This causes a problem in the work handler which walks the work_list until it's empty to process entries. This means that a single run of the work handler could process item N+1 and release it back to the free list while the actual workqueue entry is still queued. It could then get reused (INIT_WORK...) and lead to list corruption in the workqueue logic. Fix this by just removing the work_list. The workqueue already does this for us. This fixes the following error that was observed when stress testing with ucmatose on an Intel E830 in iWARP mode: [ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08) [ 151.466639] ------------[ cut here ]------------ [ 151.466986] kernel BUG at lib/list_debug.c:67! [ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary) [ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 151.469192] Workqueue: 0x0 (iw_cm_wq) [ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100 [ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 [ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046 [ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027 [ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600 [ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff [ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68 [ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000 [ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000 [ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0 [ 151.475895] PKRU: 55555554 [ 151.476118] Call Trace: [ 151.476331] <TASK> [ 151.476497] move_linked_works+0x49/0xa0 [ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0 [ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0 [ 151.477479] process_scheduled_works+0x1c8/0x410 [ 151.477823] worker_thread+0x125/0x260 [ 151.478108] ? __pfx_worker_thread+0x10/0x10 [ 151.478430] kthread+0xfe/0x240 [ 151.478671] ? __pfx_kthread+0x10/0x10 [ 151.478955] ? __pfx_kthread+0x10/0x10 [ 151.479240] ret_from_fork+0x208/0x270 [ 151.479523] ? __pfx_kthread+0x10/0x10 [ 151.479806] ret_from_fork_asm+0x1a/0x30 [ 151.480103] </TASK> | ||||
| CVE-2026-45856 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr). | ||||
| CVE-2026-45852 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init() (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this: kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe] rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150 [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user. | ||||
| CVE-2026-43501 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards. | ||||
| CVE-2026-21118 | 1 Samsung Mobile | 1 Samsung Mobile Devices | 2026-10-16 | N/A |
| Improper access control in DownloadProvider prior to SMR Oct-2026 Release 1 allows local attackers to access files in scoped storage. | ||||
| CVE-2026-19935 | 1 Zephyrproject | 1 Zephyr | 2026-10-16 | 7.5 High |
| The Bluetooth LE host queues received L2CAP connection-oriented channel (CoC) data for deferred processing through a struct k_work embedded in the channel object (le_chan->rx_work, handler l2cap_rx_process()) whenever the channel uses a dynamic PSM (0x0080-0x00FF). Channel teardown in l2cap_chan_destroy() in subsys/bluetooth/host/l2cap.c cancels the retransmission-timeout work and drains the RX FIFO, but never cancels rx_work. Because that work item was submitted to the system workqueue while HCI receive processing runs on the dedicated Bluetooth RX workqueue (CONFIG_BT_RECV_WORKQ_BT, the default), a queued rx_work item can outlive the channel it points into. A remote, unauthenticated peer with an established CoC channel triggers this by sending a data K-frame immediately followed by an L2CAP Disconnect Request. The K-frame submits rx_work to the system workqueue; because both workqueue threads are cooperative and the Bluetooth RX workqueue runs at the higher priority (K_PRIO_COOP(CONFIG_BT_RX_PRIO) versus CONFIG_SYSTEM_WORKQUEUE_PRIORITY), the pending item cannot run before the following Disconnect Request is processed in le_disconn_req() -> l2cap_chan_del() -> l2cap_chan_destroy(). The stack then invokes the released() callback, which the API documents as meaning the stack has dropped all references and the application may free the channel memory. The application therefore frees or re-accepts into an object that the system workqueue still holds in its pending list. If the memory is freed and reallocated, the workqueue later dereferences a list node and a handler function pointer read from reused memory; if the object is re-used for a later connection, l2cap_chan_add() calls k_work_init() on a still-enqueued work item, corrupting the workqueue's pending list so that unrelated work items are dropped or the queue spins on a looped list. A related variant lets l2cap_rx_process() run concurrently with teardown, racing the net_buf unref of le_chan->_sdu and the clearing of chan->conn. The fix routes the channel RX work to the Bluetooth workqueue - the same context in which every teardown path runs - and adds an explicit k_work_cancel() of le_chan->rx_work in l2cap_chan_destroy(), so no reference to the channel survives the released() callback. Configurations without CONFIG_BT_L2CAP_DYNAMIC_CHANNEL, or that only use SIG-assigned PSMs (EATT 0x0027, OTS 0x0025) which take the inline receive path, are not affected. | ||||
| CVE-2026-19739 | 1 Zephyrproject | 1 Zephyr | 2026-10-16 | 6.5 Medium |
| The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it. A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND. With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable. | ||||
| CVE-2026-19738 | 1 Zephyrproject | 1 Zephyr | 2026-10-16 | 6.5 Medium |
| The Bluetooth Link Layer Control Procedure (LLCP) implementation for Connected Isochronous Stream (CIS) creation retains an RX node (ctx->node_ref.rx, marked NODE_RX_TYPE_RETAIN) so it can later be reused as the host notification — on the peripheral while awaiting the Host's reply to an LL_CIS_REQ, and on the central for the whole duration of a locally initiated CIS Create. In subsys/bluetooth/controller/ll_sw/ull_llcp_cc.c, the "invalid PDU received" paths of llcp_rp_cc_rx() and llcp_lp_cc_rx() terminated the connection and completed the procedure without releasing that retained node, breaking the invariant checked in llcp_lr_check_done() and llcp_rr_check_done() and orphaning the node's memory. A peer device within radio range can reach this with a single extra LL Control PDU on an unauthenticated, unencrypted ACL link. Against a peripheral, the attacker sends a valid LL_CIS_REQ and then, before the Host replies, any unrelated LL Control PDU (for example LL_VERSION_IND), which ull_cp_rx() routes into the active remote procedure. Against a central performing a CIS Create, a malicious peripheral answers with LL_UNKNOWN_RSP for CIS_REQ, which is dispatched into the active local procedure. No pairing, encryption or user interaction is required; the code is compiled in when CONFIG_BT_CTLR_PERIPHERAL_ISO or CONFIG_BT_CTLR_CENTRAL_ISO is enabled. In default builds (CONFIG_BT_CTLR_ASSERT_DEBUG is default y) the retained-node assertion fires immediately, producing a controller fatal error and, typically, a system reset from one injected PDU. With the development assertions disabled, each attempt permanently loses one node from the controller's small LL notification pool (LL_PDU_RX_CNT, 2 * CONFIG_BT_CTLR_LLCP_CONN) together with its memq_link_t; repeating the connect-attack-reconnect cycle exhausts the pool, after which notification allocation always fails, RX flow control stalls, and the non-disableable LL_ASSERT_ERR() in llcp_lp_cc_flush() faults. The impact is limited to availability — the leaked node is orphaned, never reused or double-freed — and recovery requires a reboot. | ||||
| CVE-2026-19737 | 1 Zephyrproject | 1 Zephyr | 2026-10-16 | 5.5 Medium |
| i2s_esp32_trigger_check() in drivers/i2s/i2s_esp32.c validates the requested direction only for I2S_DIR_BOTH. The I2S_DIR_RX and I2S_DIR_TX branches read dev_cfg->rx.data->configured / dev_cfg->tx.data->configured without first checking the stream pointers. The device instantiation macro I2S_ESP32_STREAM_INIT() sets both .conf and .data to NULL for a direction the devicetree does not describe, so on an instance that wires only one direction — the normal shape for audio output or a worldsemi,ws2812-i2s LED strip — the other direction dereferences a NULL pointer instead of returning an error. i2s_trigger() is a Zephyr syscall, and z_vrfy_i2s_trigger() in drivers/i2s/i2s_handlers.c validates only the device object and the presence of the trigger API pointer; the dir argument is passed to the driver unvalidated. On a build with CONFIG_USERSPACE enabled, a user-mode thread that has been granted the I2S device can issue a single i2s_trigger() call naming the unwired direction and cause a load from address 0 in kernel mode. Among the Espressif parts that carry this driver, userspace is available in-tree only on RISC-V SoCs with CONFIG_RISCV_PMP, and v4.4.0 is the first release where that is buildable: the ESP32-C6 HPCORE selects RISCV_PMP when it is not built for MCUboot. ESP32-C5 in v4.4.x carries the same PMP-region and userspace linker support but does not select RISCV_PMP by default. Espressif Xtensa targets do not support Zephyr userspace, and in a non-userspace build the bad direction can only come from in-kernel application code. The impact is limited to availability: the access is a read at offset 0 of the missing stream structure, so there is no attacker-controlled offset, no write primitive and no information disclosure. With the default fatal-error handler the resulting exception halts the system, giving an unprivileged user-mode thread a system-wide denial of service. The fix adds the same pointer check the I2S_DIR_BOTH branch already performed and returns -ENOSYS for a direction the instance does not implement; the driver's other entry points (i2s_esp32_config_check(), i2s_esp32_config_get(), i2s_esp32_read(), i2s_esp32_write()) already guarded the pointers, and a static audit found no equivalent unguarded path. The driver defect is older than the affected range. The unguarded dereference is present from v4.2.0 (reached through i2s_esp32_trigger_stream(), whose if (stream) guard tests the address of a struct member and is never false) and takes its present i2s_esp32_trigger_check() form in v4.3.0. No in-tree Espressif configuration before v4.4.0 can run a user-mode thread, so in v4.2.x and v4.3.x the direction argument can only come from trusted kernel code. Those releases carry the bug but are not listed as affected; the fix has also been merged to v4.3-branch as hardening. | ||||
| CVE-2026-111114 | 2026-10-16 | 7.5 High | ||
| The Nexter Extension – Security, Performance, Code Snippets & Site Toolkit plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.7.11 The vulnerability exists because the `/?reset-view` handler in `role_switcher_to_view_admin_as()` performs no nonce or capability check when the supplied username matches the authenticated caller, and because the plugin's only cleanup mechanism — the `profile_update` hook — does not fire when WordPress performs a bulk role change via `wp-admin/users.php?action=promote`, which calls `WP_User::set_role()` directly and leaves a stale `administrator` value in the `nxtext_view_admin_original_role` user meta. This makes it possible for authenticated attackers with Subscriber-level access or above to restore the stale stored Administrator role to their own account, effectively escalating their privileges to Administrator. Exploitation requires that the attacker's account previously held the Administrator role and used the View Admin Role Switcher feature before being demoted specifically through the bulk role-change control rather than the Edit User screen, as only the bulk path bypasses the `profile_update` hook that would otherwise have cleared the stored original role. | ||||
| CVE-2026-110019 | 2026-10-16 | 4.3 Medium | ||
| The Bulk Page Generator – LPagery plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.1.0 This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to create, modify, and delete LPagery-managed WordPress pages and bulk page-generation processes that are otherwise restricted to administrators. On default fresh installations where Freemius has not been opted into, the AES-256-CBC key used to validate Bearer tokens collapses to the publicly known SHA-256 hash of an empty string, making the token entirely forgeable by any authenticated user. | ||||
| CVE-2026-109400 | 2026-10-16 | 7.5 High | ||
| The InstaWP Connect – 1-click WP Staging & Migration plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 0.1.4.1 This is due to the plugin registering its admin page via `add_management_page()` using a role name returned by `InstaWP_Setting::get_allowed_role()` as the required capability — which WordPress resolves as a real capability match for any user holding that role — combined with `generate_section_field()` rendering the master API key from the `instawp_api_options` option directly as the `value` attribute of a plain-text HTML input with no additional `manage_options` or equivalent capability check. This makes it possible for authenticated attackers with Subscriber-level access and above to read the plaintext master API key, use its SHA-256-derived secret as a bearer token accepted by the plugin's REST API `validate_api_request()`, and call `POST /wp-json/instawp-connect/v2/auto-login` to mint a 30-second single-use login URL that sets an administrator authentication cookie — fully escalating their privileges. Exploitation requires the site to be actively connected to InstaWP and an administrator to have added the attacker's role to the plugin's Sync Tab Access list (`instawp_sync_tab_roles`); notably, the settings tab suppression logic only hides the tab when `administrator` is absent from the list entirely, meaning a mixed configuration retaining administrator alongside a lower role still serves the full settings page — including the API key — to the lower-privileged user. | ||||
| CVE-2026-108978 | 1 Samsung Open Source | 1 Rlottie | 2026-10-16 | 5.5 Medium |
| Heap-based buffer overflow vulnerability in Samsung Opensource rlottie allows Buffer Overflow via Environment Variables. This issue affects rlottie: e57b094f03c39a751a1fded6f7d6c13f1ed95ec9. | ||||