Export limit exceeded: 26094 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (26094 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2025-40161 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mailbox: zynqmp-ipi: Fix SGI cleanup on unbind The driver incorrectly determines SGI vs SPI interrupts by checking IRQ number < 16, which fails with dynamic IRQ allocation. During unbind, this causes improper SGI cleanup leading to kernel crash. Add explicit irq_type field to pdata for reliable identification of SGI interrupts (type-2) and only clean up SGI resources when appropriate.
CVE-2025-40091 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix too early devlink_free() in ixgbe_remove() Since ixgbe_adapter is embedded in devlink, calling devlink_free() prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free() to the end. KASAN report: BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] Read of size 8 at addr ffff0000adf813e0 by task bash/2095 CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full) [...] Call trace: show_stack+0x30/0x90 (C) dump_stack_lvl+0x9c/0xd0 print_address_description.constprop.0+0x90/0x310 print_report+0x104/0x1f0 kasan_report+0x88/0x180 __asan_report_load8_noabort+0x20/0x30 ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe] ixgbe_remove+0x2d0/0x8c0 [ixgbe] pci_device_remove+0xa0/0x220 device_remove+0xb8/0x170 device_release_driver_internal+0x318/0x490 device_driver_detach+0x40/0x68 unbind_store+0xec/0x118 drv_attr_store+0x64/0xb8 sysfs_kf_write+0xcc/0x138 kernfs_fop_write_iter+0x294/0x440 new_sync_write+0x1fc/0x588 vfs_write+0x480/0x6a0 ksys_write+0xf0/0x1e0 __arm64_sys_write+0x70/0xc0 invoke_syscall.constprop.0+0xcc/0x280 el0_svc_common.constprop.0+0xa8/0x248 do_el0_svc+0x44/0x68 el0_svc+0x54/0x160 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8
CVE-2025-40181 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP When running as an SNP or TDX guest under KVM, force the legacy PCI hole, i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC via a forced variable MTRR range. In most KVM-based setups, legacy devices such as the HPET and TPM are enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and optionally a SystemMemory descriptor for an OperationRegion, e.g. if the device needs to be accessed via a Control Method. If a SystemMemory entry is present, then the kernel's ACPI driver will auto-ioremap the region so that it can be accessed at will. However, the ACPI spec doesn't provide a way to enumerate the memory type of SystemMemory regions, i.e. there's no way to tell software that a region must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86. The dedicated device drivers however, e.g. the HPET driver and TPM driver, want to map their associated memory as UC or WC, as accessing PCI devices using WB is unsupported. On bare metal and non-CoCO, the conflicting requirements "work" as firmware configures the PCI hole (and other device memory) to be UC in the MTRRs. So even though the ACPI mappings request WB, they are forced to UC- in the kernel's tracking due to the kernel properly handling the MTRR overrides, and thus are compatible with the drivers' requested WC/UC-. With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their requested WB if the ACPI mappings are established before the dedicated driver code attempts to initialize the device. E.g. if acpi_init() runs before the corresponding device driver is probed, ACPI's WB mapping will "win", and result in the driver's ioremap() failing because the existing WB mapping isn't compatible with the requested WC/UC-. E.g. when a TPM is emulated by the hypervisor (ignoring the security implications of relying on what is allegedly an untrusted entity to store measurements), the TPM driver will request UC and fail: [ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0 [ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12 Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC). E.g. tracing mapping requests for TPM TIS yields: Mapping TPM TIS with req_type = 0 WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460 Modules linked in: CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025 RIP: 0010:memtype_reserve+0x2ab/0x460 __ioremap_caller+0x16d/0x3d0 ioremap_cache+0x17/0x30 x86_acpi_os_ioremap+0xe/0x20 acpi_os_map_iomem+0x1f3/0x240 acpi_os_map_memory+0xe/0x20 acpi_ex_system_memory_space_handler+0x273/0x440 acpi_ev_address_space_dispatch+0x176/0x4c0 acpi_ex_access_region+0x2ad/0x530 acpi_ex_field_datum_io+0xa2/0x4f0 acpi_ex_extract_from_field+0x296/0x3e0 acpi_ex_read_data_from_field+0xd1/0x460 acpi_ex_resolve_node_to_value+0x2ee/0x530 acpi_ex_resolve_to_value+0x1f2/0x540 acpi_ds_evaluate_name_path+0x11b/0x190 acpi_ds_exec_end_op+0x456/0x960 acpi_ps_parse_loop+0x27a/0xa50 acpi_ps_parse_aml+0x226/0x600 acpi_ps_execute_method+0x172/0x3e0 acpi_ns_evaluate+0x175/0x5f0 acpi_evaluate_object+0x213/0x490 acpi_evaluate_integer+0x6d/0x140 acpi_bus_get_status+0x93/0x150 acpi_add_single_object+0x43a/0x7c0 acpi_bus_check_add+0x149/0x3a0 acpi_bus_check_add_1+0x16/0x30 acpi_ns_walk_namespace+0x22c/0x360 acpi_walk_namespace+0x15c/0x170 acpi_bus_scan+0x1dd/0x200 acpi_scan_init+0xe5/0x2b0 acpi_init+0x264/0x5b0 do_one_i ---truncated---
CVE-2025-40188 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: pwm: berlin: Fix wrong register in suspend/resume The 'enable' register should be BERLIN_PWM_EN rather than BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there will be cpu exception then kernel panic during suspend/resume.
CVE-2025-40191 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd process ref leaking when userptr unmapping kfd_lookup_process_by_pid hold the kfd process reference to ensure it doesn't get destroyed while sending the segfault event to user space. Calling kfd_lookup_process_by_pid as function parameter leaks the kfd process refcount and miss the NULL pointer check if app process is already destroyed.
CVE-2025-40194 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request() The cpufreq_cpu_put() call in update_qos_request() takes place too early because the latter subsequently calls freq_qos_update_request() that indirectly accesses the policy object in question through the QoS request object passed to it. Fortunately, update_qos_request() is called under intel_pstate_driver_lock, so this issue does not matter for changing the intel_pstate operation mode, but it theoretically can cause a crash to occur on CPU device hot removal (which currently can only happen in virt, but it is formally supported nevertheless). Address this issue by modifying update_qos_request() to drop the reference to the policy later.
CVE-2025-40200 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Squashfs: reject negative file sizes in squashfs_read_inode() Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs. This warning is ultimately caused because the underlying Squashfs file system returns a file with a negative file size. This commit checks for a negative file size and returns EINVAL. [phillip@squashfs.org.uk: only need to check 64 bit quantity]
CVE-2025-40100 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: btrfs: do not assert we found block group item when creating free space tree Currently, when building a free space tree at populate_free_space_tree(), if we are not using the block group tree feature, we always expect to find block group items (either extent items or a block group item with key type BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with btrfs_search_slot_for_read(), so we assert that we found an item. However this expectation is wrong since we can have a new block group created in the current transaction which is still empty and for which we still have not added the block group's item to the extent tree, in which case we do not have any items in the extent tree associated to the block group. The insertion of a new block group's block group item in the extent tree happens at btrfs_create_pending_block_groups() when it calls the helper insert_block_group_item(). This typically is done when a transaction handle is released, committed or when running delayed refs (either as part of a transaction commit or when serving tickets for space reservation if we are low on free space). So remove the assertion at populate_free_space_tree() even when the block group tree feature is not enabled and update the comment to mention this case. Syzbot reported this with the following stack trace: BTRFS info (device loop3 state M): rebuilding free space tree assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1115! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115 Code: ff ff e8 d3 (...) RSP: 0018:ffffc9000430f780 EFLAGS: 00010246 RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94 R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001 R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0 Call Trace: <TASK> btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364 btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062 btrfs_remount_rw fs/btrfs/super.c:1334 [inline] btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559 reconfigure_super+0x227/0x890 fs/super.c:1076 do_remount fs/namespace.c:3279 [inline] path_mount+0xd1a/0xfe0 fs/namespace.c:4027 do_mount fs/namespace.c:4048 [inline] __do_sys_mount fs/namespace.c:4236 [inline] __se_sys_mount+0x313/0x410 fs/namespace.c:4213 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f424e39066a Code: d8 64 89 02 (...) RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000 RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020 R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380 R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]---
CVE-2025-40097 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix missing pointer check in hda_component_manager_init function The __component_match_add function may assign the 'matchptr' pointer the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced. The call stack leading to the error looks like this: hda_component_manager_init |-> component_match_add |-> component_match_add_release |-> __component_match_add ( ... ,**matchptr, ... ) |-> *matchptr = ERR_PTR(-ENOMEM); // assign |-> component_master_add_with_match( ... match) |-> component_match_realloc(match, match->num); // dereference Add IS_ERR() check to prevent the crash. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2025-40175 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: idpf: cleanup remaining SKBs in PTP flows When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs.
CVE-2025-40106 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: comedi: fix divide-by-zero in comedi_buf_munge() The comedi_buf_munge() function performs a modulo operation `async->munge_chan %= async->cmd.chanlist_len` without first checking if chanlist_len is zero. If a user program submits a command with chanlist_len set to zero, this causes a divide-by-zero error when the device processes data in the interrupt handler path. Add a check for zero chanlist_len at the beginning of the function, similar to the existing checks for !map and CMDF_RAWDATA flag. When chanlist_len is zero, update munge_count and return early, indicating the data was handled without munging. This prevents potential kernel panics from malformed user commands.
CVE-2025-40107 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled This issue is similar to the vulnerability in the `mcp251x` driver, which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from sleep before interface was brought up"). In the `hi311x` driver, when the device resumes from sleep, the driver schedules `priv->restart_work`. However, if the network interface was not previously enabled, the `priv->wq` (workqueue) is not allocated and initialized, leading to a null pointer dereference. To fix this, we move the allocation and initialization of the workqueue from the `hi3110_open` function to the `hi3110_can_probe` function. This ensures that the workqueue is properly initialized before it is used during device resume. And added logic to destroy the workqueue in the error handling paths of `hi3110_can_probe` and in the `hi3110_can_remove` function to prevent resource leaks.
CVE-2025-40108 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped.
CVE-2025-40110 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a null-ptr access in the cursor snooper Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code.
CVE-2025-40115 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e
CVE-2025-40113 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere.
CVE-2023-53832 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null-ptr-deref in raid10_sync_request init_resync() inits mempool and sets conf->have_replacemnt at the beginning of sync, close_sync() frees the mempool when sync is completed. After [1] recovery might be skipped and init_resync() is called but close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio. The following is one way to reproduce the issue. 1) create a array, wait for resync to complete, mddev->recovery_cp is set to MaxSector. 2) recovery is woken and it is skipped. conf->have_replacement is set to 0 in init_resync(). close_sync() not called. 3) some io errors and rdev A is set to WantReplacement. 4) a new device is added and set to A's replacement. 5) recovery is woken, A have replacement, but conf->have_replacemnt is 0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref occurs. Fix it by not calling init_resync() if recovery skipped. [1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
CVE-2023-53834 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ina2xx: avoid NULL pointer dereference on OF device match The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table.
CVE-2023-53839 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: dccp: fix data-race around dp->dccps_mss_cache dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket. Same thing in do_dccp_getsockopt(). Add READ_ONCE()/WRITE_ONCE() annotations, and change dccp_sendmsg() to check again dccps_mss_cache after socket is locked.
CVE-2023-53840 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: usb: early: xhci-dbc: Fix a potential out-of-bound memory access If xdbc_bulk_write() fails, the values in 'buf' can be anything. So the string is not guaranteed to be NULL terminated when xdbc_trace() is called. Reserve an extra byte, which will be zeroed automatically because 'buf' is a static variable, in order to avoid troubles, should it happen.