Export limit exceeded: 26100 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26100 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68193 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Add devm release action to safely tear down CT When a buffer object (BO) is allocated with the XE_BO_FLAG_GGTT_INVALIDATE flag, the driver initiates TLB invalidation requests via the CTB mechanism while releasing the BO. However a premature release of the CTB BO can lead to system crashes, as observed in: Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:h2g_write+0x2f3/0x7c0 [xe] Call Trace: guc_ct_send_locked+0x8b/0x670 [xe] xe_guc_ct_send_locked+0x19/0x60 [xe] send_tlb_invalidation+0xb4/0x460 [xe] xe_gt_tlb_invalidation_ggtt+0x15e/0x2e0 [xe] ggtt_invalidate_gt_tlb.part.0+0x16/0x90 [xe] ggtt_node_remove+0x110/0x140 [xe] xe_ggtt_node_remove+0x40/0xa0 [xe] xe_ggtt_remove_bo+0x87/0x250 [xe] Introduce a devm-managed release action during xe_guc_ct_init() and xe_guc_ct_init_post_hwconfig() to ensure proper CTB disablement before resource deallocation, preventing the use-after-free scenario. | ||||
| CVE-2025-68204 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: scmi: Fix genpd leak on provider registration failure If of_genpd_add_provider_onecell() fails during probe, the previously created generic power domains are not removed, leading to a memory leak and potential kernel crash later in genpd_debug_add(). Add proper error handling to unwind the initialized domains before returning from probe to ensure all resources are correctly released on failure. Example crash trace observed without this fix: | Unable to handle kernel paging request at virtual address fffffffffffffc70 | CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT | Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : genpd_debug_add+0x2c/0x160 | lr : genpd_debug_init+0x74/0x98 | Call trace: | genpd_debug_add+0x2c/0x160 (P) | genpd_debug_init+0x74/0x98 | do_one_initcall+0xd0/0x2d8 | do_initcall_level+0xa0/0x140 | do_initcalls+0x60/0xa8 | do_basic_setup+0x28/0x40 | kernel_init_freeable+0xe8/0x170 | kernel_init+0x2c/0x140 | ret_from_fork+0x10/0x20 | ||||
| CVE-2025-68326 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Fix stack_depot usage Add missing stack_depot_init() call when CONFIG_DRM_XE_DEBUG_GUC is enabled to fix the following call stack: [] BUG: kernel NULL pointer dereference, address: 0000000000000000 [] Workqueue: drm_sched_run_job_work [gpu_sched] [] RIP: 0010:stack_depot_save_flags+0x172/0x870 [] Call Trace: [] <TASK> [] fast_req_track+0x58/0xb0 [xe] (cherry picked from commit 64fdf496a6929a0a194387d2bb5efaf5da2b542f) | ||||
| CVE-2025-68318 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL The AXI crossbar of TH1520 has no proper timeout handling, which means gating AXI clocks can easily lead to bus timeout and thus system hang. Set all AXI clock gates to CLK_IS_CRITICAL. All these clock gates are ungated by default on system reset. In addition, convert all current CLK_IGNORE_UNUSED usage to CLK_IS_CRITICAL to prevent unwanted clock gating. | ||||
| CVE-2025-68329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel calls vm_ops->close on each portion. For trace buffer mappings, this results in ring_buffer_unmap() being called multiple times while ring_buffer_map() was only called once. This causes ring_buffer_unmap() to return -ENODEV on subsequent calls because user_mapped is already 0, triggering a WARN_ON. Trace buffer mappings cannot support partial mappings because the ring buffer structure requires the complete buffer including the meta page. Fix this by adding a may_split callback that returns -EINVAL to prevent VMA splits entirely. | ||||
| CVE-2025-68293 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix NULL pointer deference when splitting folio Commit c010d47f107f ("mm: thp: split huge page to any lower order pages") introduced an early check on the folio's order via mapping->flags before proceeding with the split work. This check introduced a bug: for shmem folios in the swap cache and truncated folios, the mapping pointer can be NULL. Accessing mapping->flags in this state leads directly to a NULL pointer dereference. This commit fixes the issue by moving the check for mapping != NULL before any attempt to access mapping->flags. | ||||
| CVE-2025-68227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-40209 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leak of qgroup_list in btrfs_add_qgroup_relation When btrfs_add_qgroup_relation() is called with invalid qgroup levels (src >= dst), the function returns -EINVAL directly without freeing the preallocated qgroup_list structure passed by the caller. This causes a memory leak because the caller unconditionally sets the pointer to NULL after the call, preventing any cleanup. The issue occurs because the level validation check happens before the mutex is acquired and before any error handling path that would free the prealloc pointer. On this early return, the cleanup code at the 'out' label (which includes kfree(prealloc)) is never reached. In btrfs_ioctl_qgroup_assign(), the code pattern is: prealloc = kzalloc(sizeof(*prealloc), GFP_KERNEL); ret = btrfs_add_qgroup_relation(trans, sa->src, sa->dst, prealloc); prealloc = NULL; // Always set to NULL regardless of return value ... kfree(prealloc); // This becomes kfree(NULL), does nothing When the level check fails, 'prealloc' is never freed by either the callee or the caller, resulting in a 64-byte memory leak per failed operation. This can be triggered repeatedly by an unprivileged user with access to a writable btrfs mount, potentially exhausting kernel memory. Fix this by freeing prealloc before the early return, ensuring prealloc is always freed on all error paths. | ||||
| CVE-2025-68230 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix gpu page fault after hibernation on PF passthrough On PF passthrough environment, after hibernate and then resume, coralgemm will cause gpu page fault. Mode1 reset happens during hibernate, but partition mode is not restored on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right after resume. When CP access the MQD BO, wrong stride size is used, this will cause out of bound access on the MQD BO, resulting page fault. The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called when resume from a hibernation. KFD resume is called separately during a reset recovery or resume from suspend sequence. Hence it's not required to be called as part of partition switch. (cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a) | ||||
| CVE-2025-68176 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: cadence: Check for the existence of cdns_pcie::ops before using it cdns_pcie::ops might not be populated by all the Cadence glue drivers. This is going to be true for the upcoming Sophgo platform which doesn't set the ops. Hence, add a check to prevent NULL pointer dereference. [mani: reworded subject and description] | ||||
| CVE-2025-68338 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Don't free uninitialized ksz_irq If something goes wrong at setup, ksz_irq_free() can be called on uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It leads to freeing uninitialized IRQ numbers and/or domains. Use dsa_switch_for_each_user_port_continue_reverse() in the error path to iterate only over the fully initialized ports. | ||||
| CVE-2025-68247 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Plug potential memory leak in do_timer_create() When posix timer creation is set to allocate a given timer ID and the access to the user space value faults, the function terminates without freeing the already allocated posix timer structure. Move the allocation after the user space access to cure that. [ tglx: Massaged change log ] | ||||
| CVE-2025-40003 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work The origin code calls cancel_delayed_work() in ocelot_stats_deinit() to cancel the cyclic delayed work item ocelot->stats_work. However, cancel_delayed_work() may fail to cancel the work item if it is already executing. While destroy_workqueue() does wait for all pending work items in the work queue to complete before destroying the work queue, it cannot prevent the delayed work item from being rescheduled within the ocelot_check_stats_work() function. This limitation exists because the delayed work item is only enqueued into the work queue after its timer expires. Before the timer expiration, destroy_workqueue() has no visibility of this pending work item. Once the work queue appears empty, destroy_workqueue() proceeds with destruction. When the timer eventually expires, the delayed work item gets queued again, leading to the following warning: workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0 ... RIP: 0010:__queue_work+0x875/0xaf0 ... RSP: 0018:ffff88806d108b10 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88 RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2 R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000 R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0 FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0 Call Trace: <IRQ> ? kasan_report+0xc6/0xf0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? __pfx_delayed_work_timer_fn+0x10/0x10 call_timer_fn+0x25/0x1c0 __run_timer_base.part.0+0x3be/0x8c0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x1c0/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... The following diagram reveals the cause of the above warning: CPU 0 (remove) | CPU 1 (delayed work callback) mscc_ocelot_remove() | ocelot_deinit() | ocelot_check_stats_work() ocelot_stats_deinit() | cancel_delayed_work()| ... | queue_delayed_work() destroy_workqueue() | (wait a time) | __queue_work() //UAF The above scenario actually constitutes a UAF vulnerability. The ocelot_stats_deinit() is only invoked when initialization failure or resource destruction, so we must ensure that any delayed work items cannot be rescheduled. Replace cancel_delayed_work() with disable_delayed_work_sync() to guarantee proper cancellation of the delayed work item and ensure completion of any currently executing work before the workqueue is deallocated. A deadlock concern was considered: ocelot_stats_deinit() is called in a process context and is not holding any locks that the delayed work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated ocelot-swit ---truncated--- | ||||
| CVE-2025-68245 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netpoll: fix incorrect refcount handling causing incorrect cleanup commit efa95b01da18 ("netpoll: fix use after free") incorrectly ignored the refcount and prematurely set dev->npinfo to NULL during netpoll cleanup, leading to improper behavior and memory leaks. Scenario causing lack of proper cleanup: 1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is allocated, and refcnt = 1 - Keep in mind that npinfo is shared among all netpoll instances. In this case, there is just one. 2) Another netpoll is also associated with the same NIC and npinfo->refcnt += 1. - Now dev->npinfo->refcnt = 2; - There is just one npinfo associated to the netdev. 3) When the first netpolls goes to clean up: - The first cleanup succeeds and clears np->dev->npinfo, ignoring refcnt. - It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);` - Set dev->npinfo = NULL, without proper cleanup - No ->ndo_netpoll_cleanup() is either called 4) Now the second target tries to clean up - The second cleanup fails because np->dev->npinfo is already NULL. * In this case, ops->ndo_netpoll_cleanup() was never called, and the skb pool is not cleaned as well (for the second netpoll instance) - This leaks npinfo and skbpool skbs, which is clearly reported by kmemleak. Revert commit efa95b01da18 ("netpoll: fix use after free") and adds clarifying comments emphasizing that npinfo cleanup should only happen once the refcount reaches zero, ensuring stable and correct netpoll behavior. | ||||
| CVE-2022-50703 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() There are two refcount leak bugs in qcom_smsm_probe(): (1) The 'local_node' is escaped out from for_each_child_of_node() as the break of iteration, we should call of_node_put() for it in error path or when it is not used anymore. (2) The 'node' is escaped out from for_each_available_child_of_node() as the 'goto', we should call of_node_put() for it in goto target. | ||||
| CVE-2022-50876 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: musb: Fix musb_gadget.c rxstate overflow bug The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds. Fix it by add the length check : fifocnt = min_t(unsigned, request->length - request->actual, fifocnt); | ||||
| CVE-2025-68178 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix possible deadlock while configuring policy Following deadlock can be triggered easily by lockdep: WARNING: possible circular locking dependency detected 6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted ------------------------------------------------------ check/1334 is trying to acquire lock: ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180 but task is already holding lock: ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}: blk_queue_enter+0x40b/0x470 blkg_conf_prep+0x7b/0x3c0 tg_set_limit+0x10a/0x3e0 cgroup_file_write+0xc6/0x420 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&q->rq_qos_mutex){+.+.}-{4:4}: __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 wbt_init+0x17e/0x280 wbt_enable_default+0xe9/0x140 blk_register_queue+0x1da/0x2e0 __add_disk+0x38c/0x5d0 add_disk_fwnode+0x89/0x250 device_add_disk+0x18/0x30 virtblk_probe+0x13a3/0x1800 virtio_dev_probe+0x389/0x610 really_probe+0x136/0x620 __driver_probe_device+0xb3/0x230 driver_probe_device+0x2f/0xe0 __driver_attach+0x158/0x250 bus_for_each_dev+0xa9/0x130 driver_attach+0x26/0x40 bus_add_driver+0x178/0x3d0 driver_register+0x7d/0x1c0 __register_virtio_driver+0x2c/0x60 virtio_blk_init+0x6f/0xe0 do_one_initcall+0x94/0x540 kernel_init_freeable+0x56a/0x7b0 kernel_init+0x2b/0x270 ret_from_fork+0x268/0x4c0 ret_from_fork_asm+0x1a/0x30 -> #0 (&q->sysfs_lock){+.+.}-{4:4}: __lock_acquire+0x1835/0x2940 lock_acquire+0xf9/0x450 __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 blk_unregister_queue+0x53/0x180 __del_gendisk+0x226/0x690 del_gendisk+0xba/0x110 sd_remove+0x49/0xb0 [sd_mod] device_remove+0x87/0xb0 device_release_driver_internal+0x11e/0x230 device_release_driver+0x1a/0x30 bus_remove_device+0x14d/0x220 device_del+0x1e1/0x5a0 __scsi_remove_device+0x1ff/0x2f0 scsi_remove_device+0x37/0x60 sdev_store_delete+0x77/0x100 dev_attr_store+0x1f/0x40 sysfs_kf_write+0x65/0x90 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)#3); lock(&q->rq_qos_mutex); lock(&q->q_usage_counter(queue)#3); lock(&q->sysfs_lock); Root cause is that queue_usage_counter is grabbed with rq_qos_mutex held in blkg_conf_prep(), while queue should be freezed before rq_qos_mutex from other context. The blk_queue_enter() from blkg_conf_prep() is used to protect against policy deactivation, which is already protected with blkcg_mutex, hence convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile, consider that blkcg_mutex is held after queue is freezed from policy deactivation, also convert blkg_alloc() to use GFP_NOIO. | ||||
| CVE-2025-68249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: most: usb: hdm_probe: Fix calling put_device() before device initialization The early error path in hdm_probe() can jump to err_free_mdev before &mdev->dev has been initialized with device_initialize(). Calling put_device(&mdev->dev) there triggers a device core WARN and ends up invoking kref_put(&kobj->kref, kobject_release) on an uninitialized kobject. In this path the private struct was only kmalloc'ed and the intended release is effectively kfree(mdev) anyway, so free it directly instead of calling put_device() on an uninitialized device. This removes the WARNING and fixes the pre-initialization error path. | ||||
| CVE-2025-68257 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: check device's attached status in compat ioctls Syzbot identified an issue [1] that crashes kernel, seemingly due to unexistent callback dev->get_valid_routes(). By all means, this should not occur as said callback must always be set to get_zero_valid_routes() in __comedi_device_postconfig(). As the crash seems to appear exclusively in i386 kernels, at least, judging from [1] reports, the blame lies with compat versions of standard IOCTL handlers. Several of them are modified and do not use comedi_unlocked_ioctl(). While functionality of these ioctls essentially copy their original versions, they do not have required sanity check for device's attached status. This, in turn, leads to a possibility of calling select IOCTLs on a device that has not been properly setup, even via COMEDI_DEVCONFIG. Doing so on unconfigured devices means that several crucial steps are missed, for instance, specifying dev->get_valid_routes() callback. Fix this somewhat crudely by ensuring device's attached status before performing any ioctls, improving logic consistency between modern and compat functions. [1] Syzbot report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0 Call Trace: <TASK> get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline] parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401 do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594 compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline] comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273 __do_compat_sys_ioctl fs/ioctl.c:695 [inline] __se_compat_sys_ioctl fs/ioctl.c:638 [inline] __ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] ... | ||||
| CVE-2025-68743 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix create memory region overlap check The current check is incorrect; it only checks if the beginning or end of a region is within an existing region. This doesn't account for userspace specifying a region that begins before and ends after an existing region. Change the logic to a range intersection check against gfns and uaddrs for each region. Remove mshv_partition_region_by_uaddr() as it is no longer used. | ||||