Export limit exceeded: 26094 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26094 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54209 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix blktrace debugfs entries leakage Commit 99d055b4fd4b ("block: remove per-disk debugfs files in blk_unregister_queue") moves blk_trace_shutdown() from blk_release_queue() to blk_unregister_queue(), this is safe if blktrace is created through sysfs, however, there is a regression in corner case. blktrace can still be enabled after del_gendisk() through ioctl if the disk is opened before del_gendisk(), and if blktrace is not shutdown through ioctl before closing the disk, debugfs entries will be leaked. Fix this problem by shutdown blktrace in disk_release(), this is safe because blk_trace_remove() is reentrant. | ||||
| CVE-2023-54211 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix warning in trace_buffered_event_disable() Warning happened in trace_buffered_event_disable() at WARN_ON_ONCE(!trace_buffered_event_ref) Call Trace: ? __warn+0xa5/0x1b0 ? trace_buffered_event_disable+0x189/0x1b0 __ftrace_event_enable_disable+0x19e/0x3e0 free_probe_data+0x3b/0xa0 unregister_ftrace_function_probe_func+0x6b8/0x800 event_enable_func+0x2f0/0x3d0 ftrace_process_regex.isra.0+0x12d/0x1b0 ftrace_filter_write+0xe6/0x140 vfs_write+0x1c9/0x6f0 [...] The cause of the warning is in __ftrace_event_enable_disable(), trace_buffered_event_enable() was called once while trace_buffered_event_disable() was called twice. Reproduction script show as below, for analysis, see the comments: ``` #!/bin/bash cd /sys/kernel/tracing/ # 1. Register a 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was set; # 2) trace_buffered_event_enable() was called first time; echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter # 2. Enable the event registered, then: # 1) SOFT_DISABLED_BIT was cleared; # 2) trace_buffered_event_disable() was called first time; echo 1 > events/initcall/initcall_finish/enable # 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was # set again!!! cat /proc/cmdline # 4. Unregister the 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was cleared again; # 2) trace_buffered_event_disable() was called second time!!! echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter ``` To fix it, IIUC, we can change to call trace_buffered_event_enable() at fist time soft-mode enabled, and call trace_buffered_event_disable() at last time soft-mode disabled. | ||||
| CVE-2023-54218 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs(). KCSAN found a data race in sock_recv_cmsgs() where the read access to sk->sk_stamp needs READ_ONCE(). BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0: sock_write_timestamp include/net/sock.h:2670 [inline] sock_recv_cmsgs include/net/sock.h:2722 [inline] packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1: sock_recv_cmsgs include/net/sock.h:2721 [inline] packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0xffffffffc4653600 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 | ||||
| CVE-2023-54220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix oops for port->pm on uart_change_pm() Unloading a hardware specific 8250 driver can produce error "Unable to handle kernel paging request at virtual address" about ten seconds after unloading the driver. This happens on uart_hangup() calling uart_change_pm(). Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind") was only a partial fix. If the hardware specific driver has initialized port->pm function, we need to clear port->pm too. Just reinitializing port->ops does not do this. Otherwise serial8250_pm() will call port->pm() instead of serial8250_do_pm(). | ||||
| CVE-2023-54225 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipa: only reset hashed tables when supported Last year, the code that manages GSI channel transactions switched from using spinlock-protected linked lists to using indexes into the ring buffer used for a channel. Recently, Google reported seeing transaction reference count underflows occasionally during shutdown. Doug Anderson found a way to reproduce the issue reliably, and bisected the issue to the commit that eliminated the linked lists and the lock. The root cause was ultimately determined to be related to unused transactions being committed as part of the modem shutdown cleanup activity. Unused transactions are not normally expected (except in error cases). The modem uses some ranges of IPA-resident memory, and whenever it shuts down we zero those ranges. In ipa_filter_reset_table() a transaction is allocated to zero modem filter table entries. If hashing is not supported, hashed table memory should not be zeroed. But currently nothing prevents that, and the result is an unused transaction. Something similar occurs when we zero routing table entries for the modem. By preventing any attempt to clear hashed tables when hashing is not supported, the reference count underflow is avoided in this case. Note that there likely remains an issue with properly freeing unused transactions (if they occur due to errors). This patch addresses only the underflows that Google originally reported. | ||||
| CVE-2023-54229 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range Because of what seems to be a typo, a 6Ghz-only phy for which the BDF does not allow the 7115Mhz channel will fail to register: WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954 Modules linked in: ath11k_pci sbsa_gwdt CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9 Hardware name: Freebox V7R Board (DT) Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : wiphy_register+0x914/0x954 lr : ieee80211_register_hw+0x67c/0xc10 sp : ffffff800b123aa0 x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418 x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168 x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014 x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718 x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006 x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284 x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: wiphy_register+0x914/0x954 ieee80211_register_hw+0x67c/0xc10 ath11k_mac_register+0x7c4/0xe10 ath11k_core_qmi_firmware_ready+0x1f4/0x570 ath11k_qmi_driver_event_work+0x198/0x590 process_one_work+0x1b8/0x328 worker_thread+0x6c/0x414 kthread+0x100/0x104 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22 ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22 ath11k_pci 0002:01:00.0: failed to create pdev core: -22 | ||||
| CVE-2023-54232 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: Only force 030 bus error if PC not in exception table __get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon. | ||||
| CVE-2023-54234 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization Commit c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic") introduced an array mrioc->evtack_cmds but initialization of the array elements was missed. They are just zero cleared. The function mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the zero value of the host_tag field, the function calls clear_bit() for mrico->evtack_cmds_bitmap with wrong bit index. This results in memory access to invalid address and "BUG: KASAN: use-after-free". This BUG was observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add the missing initialization of mrioc->evtack_cmds. | ||||
| CVE-2023-54235 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/DOE: Fix destroy_work_on_stack() race The following debug object splat was observed in testing: ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510 WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0 ... Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work RIP: 0010:debug_print_object+0x7d/0xb0 ... Call Trace: ? debug_print_object+0x7d/0xb0 ? __pfx_doe_statemachine_work+0x10/0x10 debug_object_free.part.0+0x11b/0x150 doe_statemachine_work+0x45e/0x510 process_one_work+0x1d4/0x3c0 This occurs because destroy_work_on_stack() was called after signaling the completion in the calling thread. This creates a race between destroy_work_on_stack() and the task->work struct going out of scope in pci_doe(). Signal the work complete after destroying the work struct. This is safe because signal_task_complete() is the final thing the work item does and the workqueue code is careful not to access the work struct after. | ||||
| CVE-2023-54236 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/net_failover: fix txq exceeding warning The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. | ||||
| CVE-2023-54238 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mlx5: fix skb leak while fifo resync and push During ptp resync operation SKBs were poped from the fifo but were never freed neither by napi_consume nor by dev_kfree_skb_any. Add call to napi_consume_skb to properly free SKBs. Another leak was happening because mlx5e_skb_fifo_has_room() had an error in the check. Comparing free running counters works well unless C promotes the types to something wider than the counter. In this case counters are u16 but the result of the substraction is promouted to int and it causes wrong result (negative value) of the check when producer have already overlapped but consumer haven't yet. Explicit cast to u16 fixes the issue. | ||||
| CVE-2023-54240 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all() rule_locs is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rule_locs to avoid NULL pointer dereference. | ||||
| CVE-2023-54244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: Fix oops when removing custom query handlers When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi | ||||
| CVE-2023-54245 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds When we run syzkaller we get below Out of Bound. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: dump_backtrace+0x0/0x4c8 show_stack+0x34/0x44 dump_stack_lvl+0xd8/0x118 print_address_description+0x30/0x2d8 kasan_report+0x158/0x198 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf4/0x180 _regmap_read+0xc4/0x278 _regmap_update_bits+0x130/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_digital_mute+0xec/0x140 Actually There is no need to have decimator with 32 bits. By limiting the variable with short type u8 issue is resolved. | ||||
| CVE-2023-54246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle() The rcuscale.holdoff module parameter can be used to delay the start of rcu_scale_writer() kthread. However, the hung-task timeout will trigger when the timeout specified by rcuscale.holdoff is greater than hung_task_timeout_secs: runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M" bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300" [ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds. [ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7 [ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000 [ 247.075346] Call Trace: [ 247.075660] <TASK> [ 247.075965] __schedule+0x635/0x1280 [ 247.076448] ? __pfx___schedule+0x10/0x10 [ 247.076967] ? schedule_timeout+0x2dc/0x4d0 [ 247.077471] ? __pfx_lock_release+0x10/0x10 [ 247.078018] ? enqueue_timer+0xe2/0x220 [ 247.078522] schedule+0x84/0x120 [ 247.078957] schedule_timeout+0x2e1/0x4d0 [ 247.079447] ? __pfx_schedule_timeout+0x10/0x10 [ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.080591] ? __pfx_process_timeout+0x10/0x10 [ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10 [ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.082287] rcu_scale_writer+0x6b1/0x7f0 [ 247.082773] ? mark_held_locks+0x29/0xa0 [ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.084412] kthread+0x179/0x1c0 [ 247.084759] ? __pfx_kthread+0x10/0x10 [ 247.085098] ret_from_fork+0x2c/0x50 [ 247.085433] </TASK> This commit therefore replaces schedule_timeout_uninterruptible() with schedule_timeout_idle(). | ||||
| CVE-2023-54247 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Silence a warning in btf_type_id_size() syzbot reported a warning in [1] with the following stacktrace: WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... Call Trace: <TASK> map_check_btf kernel/bpf/syscall.c:1024 [inline] map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198 __sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040 __do_sys_bpf kernel/bpf/syscall.c:5162 [inline] __se_sys_bpf kernel/bpf/syscall.c:5160 [inline] __x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With the following btf [1] DECL_TAG 'a' type_id=4 component_idx=-1 [2] PTR '(anon)' type_id=0 [3] TYPE_TAG 'a' type_id=2 [4] VAR 'a' type_id=3, linkage=static and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG), the following WARN_ON_ONCE in btf_type_id_size() is triggered: if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) && !btf_type_is_var(size_type))) return NULL; Note that 'return NULL' is the correct behavior as we don't want a DECL_TAG type to be used as a btf_{key,value}_type_id even for the case like 'DECL_TAG -> STRUCT'. So there is no correctness issue here, we just want to silence warning. To silence the warning, I added DECL_TAG as one of kinds in btf_type_nosize() which will cause btf_type_id_size() returning NULL earlier without the warning. [1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ | ||||
| CVE-2023-54249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Only send -ENOTCONN status if client driver is available For the STOP and RESET commands, only send the channel disconnect status -ENOTCONN if client driver is available. Otherwise, it will result in null pointer dereference. | ||||
| CVE-2023-54258 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential oops in cifs_oplock_break With deferred close we can have closes that race with lease breaks, and so with the current checks for whether to send the lease response, oplock_response(), this can mean that an unmount (kill_sb) can occur just before we were checking if the tcon->ses is valid. See below: [Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs] [Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39 [Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206 [Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009 [Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188 [Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900 [Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138 [Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000 [Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000 [Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0 [Fri Aug 4 04:12:50 2023] Call Trace: [Fri Aug 4 04:12:50 2023] <TASK> [Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0 [Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0 [Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0 [Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150 [Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50 [Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30 [Fri Aug 4 04:12:50 2023] </TASK> To fix this change the ordering of the checks before sending the oplock_response to first check if the openFileList is empty. | ||||
| CVE-2023-54264 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/sysv: Null check to prevent null-ptr-deref bug sb_getblk(inode->i_sb, parent) return a null ptr and taking lock on that leads to the null-ptr-deref bug. | ||||
| CVE-2023-54266 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer() 'read' is freed when it is known to be NULL, but not when a read error occurs. Revert the logic to avoid a small leak, should a m920x_read() call fail. | ||||