Export limit exceeded: 26094 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26094 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53850 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: use internal state to free traffic IRQs If the system tries to close the netdev while iavf_reset_task() is running, __LINK_STATE_START will be cleared and netif_running() will return false in iavf_reinit_interrupt_scheme(). This will result in iavf_free_traffic_irqs() not being called and a leak as follows: [7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0' [7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0 is shown when pci_disable_msix() is later called. Fix by using the internal adapter state. The traffic IRQs will always exist if state == __IAVF_RUNNING. | ||||
| CVE-2025-68786 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: skip lock-range check on equal size to avoid size==0 underflow When size equals the current i_size (including 0), the code used to call check_lock_range(filp, i_size, size - 1, WRITE), which computes `size - 1` and can underflow for size==0. Skip the equal case. | ||||
| CVE-2023-53845 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix infinite loop in nilfs_mdt_get_block() If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code. | ||||
| CVE-2025-68777 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: ti_am335x_tsc - fix off-by-one error in wire_order validation The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds access when used as index in 'config_pins[wire_order[i]]'. Since config_pins has 4 elements (indices 0-3), the valid range for wire_order should be 0-3. Fix the off-by-one error by using >= instead of > in the validation check. | ||||
| CVE-2023-53843 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject negative ifindex Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs in an xarray")) refactored the handling of pre-assigned ifindexes and let syzbot surface a latent problem in ovs. ovs does not validate ifindex, making it possible to create netdev ports with negative ifindex values. It's easy to repro with YNL: $ ./cli.py --spec netlink/specs/ovs_datapath.yaml \ --do new \ --json '{"upcall-pid": 1, "name":"my-dp"}' $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' $ ip link show -65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff ... Validate the inputs. Now the second command correctly returns: $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' lib.ynl.NlError: Netlink error: Numerical result out of range nl_len = 108 (92) nl_flags = 0x300 nl_type = 2 error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'} Accept 0 since it used to be silently ignored. | ||||
| CVE-2025-40246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix out of bounds memory read error in symlink repair xfs/286 produced this report on my test fleet: ================================================================== BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110 Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184): memcpy_orig+0x54/0x110 xrep_symlink_salvage_inline+0xb3/0xf0 [xfs] xrep_symlink_salvage+0x100/0x110 [xfs] xrep_symlink+0x2e/0x80 [xfs] xrep_attempt+0x61/0x1f0 [xfs] xfs_scrub_metadata+0x34f/0x5c0 [xfs] xfs_ioc_scrubv_metadata+0x387/0x560 [xfs] xfs_file_ioctl+0xe23/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128 allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago): xfs_init_local_fork+0x79/0xe0 [xfs] xfs_iformat_local+0xa4/0x170 [xfs] xfs_iformat_data_fork+0x148/0x180 [xfs] xfs_inode_from_disk+0x2cd/0x480 [xfs] xfs_iget+0x450/0xd60 [xfs] xfs_bulkstat_one_int+0x6b/0x510 [xfs] xfs_bulkstat_iwalk+0x1e/0x30 [xfs] xfs_iwalk_ag_recs+0xdf/0x150 [xfs] xfs_iwalk_run_callbacks+0xb9/0x190 [xfs] xfs_iwalk_ag+0x1dc/0x2f0 [xfs] xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs] xfs_iwalk+0xa4/0xd0 [xfs] xfs_bulkstat+0xfa/0x170 [xfs] xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs] xfs_file_ioctl+0xbf2/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014 ================================================================== On further analysis, I realized that the second parameter to min() is not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data buffer. if_bytes can be smaller than the data fork size because: (a) the forkoff code tries to keep the data area as large as possible (b) for symbolic links, if_bytes is the ondisk file size + 1 (c) forkoff is always a multiple of 8. Case in point: for a single-byte symlink target, forkoff will be 8 but the buffer will only be 2 bytes long. In other words, the logic here is wrong and we walk off the end of the incore buffer. Fix that. | ||||
| CVE-2023-53817 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui() During NVMeTCP Authentication a controller can trigger a kernel oops by specifying the 8192 bit Diffie Hellman group and passing a correctly sized, but zeroed Diffie Hellamn value. mpi_cmp_ui() was detecting this if the second parameter was 0, but 1 is passed from dh_is_pubkey_valid(). This causes the null pointer u->d to be dereferenced towards the end of mpi_cmp_ui() | ||||
| CVE-2023-53791 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md: fix warning for holder mismatch from export_rdev() Commit a1d767191096 ("md: use mddev->external to select holder in export_rdev()") fix the problem that 'claim_rdev' is used for blkdev_get_by_dev() while 'rdev' is used for blkdev_put(). However, if mddev->external is changed from 0 to 1, then 'rdev' is used for blkdev_get_by_dev() while 'claim_rdev' is used for blkdev_put(). And this problem can be reporduced reliably by following: New file: mdadm/tests/23rdev-lifetime devname=${dev0##*/} devt=`cat /sys/block/$devname/dev` pid="" runtime=2 clean_up_test() { pill -9 $pid echo clear > /sys/block/md0/md/array_state } trap 'clean_up_test' EXIT add_by_sysfs() { while true; do echo $devt > /sys/block/md0/md/new_dev done } remove_by_sysfs(){ while true; do echo remove > /sys/block/md0/md/dev-${devname}/state done } echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed" add_by_sysfs & pid="$pid $!" remove_by_sysfs & pid="$pid $!" sleep $runtime exit 0 Test cmd: ./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime Test result: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 960 at block/bdev.c:618 blkdev_put+0x27c/0x330 Modules linked in: multipath md_mod loop CPU: 0 PID: 960 Comm: test Not tainted 6.5.0-rc2-00121-g01e55c376936-dirty #50 RIP: 0010:blkdev_put+0x27c/0x330 Call Trace: <TASK> export_rdev.isra.23+0x50/0xa0 [md_mod] mddev_unlock+0x19d/0x300 [md_mod] rdev_attr_store+0xec/0x190 [md_mod] sysfs_kf_write+0x52/0x70 kernfs_fop_write_iter+0x19a/0x2a0 vfs_write+0x3b5/0x770 ksys_write+0x74/0x150 __x64_sys_write+0x22/0x30 do_syscall_64+0x40/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the problem by recording if 'rdev' is used as holder. | ||||
| CVE-2023-53836 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix skb refcnt race after locking changes There is a race where skb's from the sk_psock_backlog can be referenced after userspace side has already skb_consumed() the sk_buff and its refcnt dropped to zer0 causing use after free. The flow is the following: while ((skb = skb_peek(&psock->ingress_skb)) sk_psock_handle_Skb(psock, skb, ..., ingress) if (!ingress) ... sk_psock_skb_ingress sk_psock_skb_ingress_enqueue(skb) msg->skb = skb sk_psock_queue_msg(psock, msg) skb_dequeue(&psock->ingress_skb) The sk_psock_queue_msg() puts the msg on the ingress_msg queue. This is what the application reads when recvmsg() is called. An application can read this anytime after the msg is placed on the queue. The recvmsg hook will also read msg->skb and then after user space reads the msg will call consume_skb(skb) on it effectively free'ing it. But, the race is in above where backlog queue still has a reference to the skb and calls skb_dequeue(). If the skb_dequeue happens after the user reads and free's the skb we have a use after free. The !ingress case does not suffer from this problem because it uses sendmsg_*(sk, msg) which does not pass the sk_buff further down the stack. The following splat was observed with 'test_progs -t sockmap_listen': [ 1022.710250][ T2556] general protection fault, ... [...] [ 1022.712830][ T2556] Workqueue: events sk_psock_backlog [ 1022.713262][ T2556] RIP: 0010:skb_dequeue+0x4c/0x80 [ 1022.713653][ T2556] Code: ... [...] [ 1022.720699][ T2556] Call Trace: [ 1022.720984][ T2556] <TASK> [ 1022.721254][ T2556] ? die_addr+0x32/0x80^M [ 1022.721589][ T2556] ? exc_general_protection+0x25a/0x4b0 [ 1022.722026][ T2556] ? asm_exc_general_protection+0x22/0x30 [ 1022.722489][ T2556] ? skb_dequeue+0x4c/0x80 [ 1022.722854][ T2556] sk_psock_backlog+0x27a/0x300 [ 1022.723243][ T2556] process_one_work+0x2a7/0x5b0 [ 1022.723633][ T2556] worker_thread+0x4f/0x3a0 [ 1022.723998][ T2556] ? __pfx_worker_thread+0x10/0x10 [ 1022.724386][ T2556] kthread+0xfd/0x130 [ 1022.724709][ T2556] ? __pfx_kthread+0x10/0x10 [ 1022.725066][ T2556] ret_from_fork+0x2d/0x50 [ 1022.725409][ T2556] ? __pfx_kthread+0x10/0x10 [ 1022.725799][ T2556] ret_from_fork_asm+0x1b/0x30 [ 1022.726201][ T2556] </TASK> To fix we add an skb_get() before passing the skb to be enqueued in the engress queue. This bumps the skb->users refcnt so that consume_skb() and kfree_skb will not immediately free the sk_buff. With this we can be sure the skb is still around when we do the dequeue. Then we just need to decrement the refcnt or free the skb in the backlog case which we do by calling kfree_skb() on the ingress case as well as the sendmsg case. Before locking change from fixes tag we had the sock locked so we couldn't race with user and there was no issue here. | ||||
| CVE-2023-53844 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Don't leak a resource on swapout move error If moving the bo to system for swapout failed, we were leaking a resource. Fix. | ||||
| CVE-2022-50580 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-throttle: prevent overflow while calculating wait time There is a problem found by code review in tg_with_in_bps_limit() that 'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by calling mul_u64_u64_div_u64() instead. | ||||
| CVE-2025-24486 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-68186 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up The function ring_buffer_map_get_reader() is a bit more strict than the other get reader functions, and except for certain situations the rb_get_reader_page() should not return NULL. If it does, it triggers a warning. This warning was triggering but after looking at why, it was because another acceptable situation was happening and it wasn't checked for. If the reader catches up to the writer and there's still data to be read on the reader page, then the rb_get_reader_page() will return NULL as there's no new page to get. In this situation, the reader page should not be updated and no warning should trigger. | ||||
| CVE-2025-68188 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: use dst_dev_rcu() in tcp_fastopen_active_disable_ofo_check() Use RCU to avoid a pair of atomic operations and a potential UAF on dst_dev()->flags. | ||||
| CVE-2025-68190 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/atom: Check kcalloc() for WS buffer in amdgpu_atom_execute_table_locked() kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws remains NULL while ectx.ws_size is set, leading to a potential NULL pointer dereference in atom_get_src_int() when accessing WS entries. Return -ENOMEM on allocation failure to avoid the NULL dereference. | ||||
| CVE-2025-68193 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Add devm release action to safely tear down CT When a buffer object (BO) is allocated with the XE_BO_FLAG_GGTT_INVALIDATE flag, the driver initiates TLB invalidation requests via the CTB mechanism while releasing the BO. However a premature release of the CTB BO can lead to system crashes, as observed in: Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:h2g_write+0x2f3/0x7c0 [xe] Call Trace: guc_ct_send_locked+0x8b/0x670 [xe] xe_guc_ct_send_locked+0x19/0x60 [xe] send_tlb_invalidation+0xb4/0x460 [xe] xe_gt_tlb_invalidation_ggtt+0x15e/0x2e0 [xe] ggtt_invalidate_gt_tlb.part.0+0x16/0x90 [xe] ggtt_node_remove+0x110/0x140 [xe] xe_ggtt_node_remove+0x40/0xa0 [xe] xe_ggtt_remove_bo+0x87/0x250 [xe] Introduce a devm-managed release action during xe_guc_ct_init() and xe_guc_ct_init_post_hwconfig() to ensure proper CTB disablement before resource deallocation, preventing the use-after-free scenario. | ||||
| CVE-2025-68182 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link() This code frees "link" by calling kfree_rcu(link, rcu_head) and then it dereferences "link" to get the "link->fw_id". Save the "link->fw_id" first to avoid a potential use after free. | ||||
| CVE-2025-68213 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix possible vport_config NULL pointer deref in remove Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] <TASK> [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce. | ||||
| CVE-2025-68216 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Disable trampoline for kernel module function trace The current LoongArch BPF trampoline implementation is incompatible with tracing functions in kernel modules. This causes several severe and user-visible problems: * The `bpf_selftests/module_attach` test fails consistently. * Kernel lockup when a BPF program is attached to a module function [1]. * Critical kernel modules like WireGuard experience traffic disruption when their functions are traced with fentry [2]. Given the severity and the potential for other unknown side-effects, it is safest to disable the feature entirely for now. This patch prevents the BPF subsystem from allowing trampoline attachments to kernel module functions on LoongArch. This is a temporary mitigation until the core issues in the trampoline code for kernel module handling can be identified and fixed. [root@fedora bpf]# ./test_progs -a module_attach -v bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP test_module_attach:FAIL:skel_attach skeleton attach failed: -524 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. [1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/ [2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/ | ||||
| CVE-2025-68227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- | ||||