Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417953 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90042 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must never come from vmalloc()" rule by passing NULL when the message is not in the linear region. Though this causes a per-dentry kmalloc()+kfree(), this overhead exists only when processing the minority of messages that spill into vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir messages. Still, if the overhead proves unreasonable in the future, it is easy enough to mitigate: a future change could allocate a bounce buffer in parse_reply_info_readdir() and use that as `tname` instead. | ||||
| CVE-2026-90036 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during blocked-lock reaping A bare lock owner -- its only remaining reference a blocked lock on nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but no reference keeping the client alive. When the per-net laundromat reaps such a lock, freeing the nbl drops the owner reference held through flc_owner, and the final nfs4_put_stateowner() takes the client's cl_lock. Because the laundromat detaches the nbl first, __destroy_client() no longer finds it, so a concurrent force_expire_client() can free the client before nfs4_put_stateowner() runs, dereferencing cl_lock in freed memory. Pin the client with cl_rpc_users before dropping nn->blocked_locks_lock, and skip clients already expiring, whose blocked locks __destroy_client() frees while holding an owner reference. Take nn->client_lock outside nn->blocked_locks_lock. Every other site holds nn->blocked_locks_lock as a leaf, acquiring no further lock, so placing nn->client_lock outside it cannot form a lock-order cycle. | ||||
| CVE-2026-90030 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations. | ||||
| CVE-2026-89929 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU When emulating INVVPID, KVM executes INVVPID on the physical CPU using vpid02 (instead of the L1 assigned VPID), after doing some validations on the operands. However, it is possible that the physical CPU KVM executes INVVPID on is different from the CPU L2 is running on. For example, in the following scenario: - L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1) - L1 migrates to CPU #2 and executes INVVPID - KVM executes INVVPID on CPU #2 - L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1) The TLB entries on CPU #1 are never invalidated, because INVVPID was executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e. vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH). Ensure that INVVPID is being executed on the same pCPU that L2 last ran on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID flush on the next nested VM-Enter (as KVM will detect L1 using a different VPID for L2). If L2 ends up running on a different pCPU, KVM will flush the TLB anyway through vmx_vcpu_load_vmcs(). | ||||
| CVE-2026-89913 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each() and dereferences the returned struct vgic_irq in the loop body without holding a reference on the LPI. The xarray iterator only provides temporary RCU coverage while looking up the current entry. That is not sufficient for this loop body, which reads fields from struct vgic_irq and performs guest memory accesses before the iteration completes. A concurrent path can trigger this race: the irqfd cached injection path (vgic_its_inject_cached_translation) obtains a transient LPI reference via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex, config_lock, or its_lock. If guest ITS DISCARD then drops the cache and ITE references under its_lock, the transient inject reference may become the final one. When vgic_put_irq() drops it, the LPI is erased from lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables() may still hold a stale pointer obtained from the xarray iterator and dereference it after the RCU grace period completes. Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes a stable reference, and dropping it with vgic_put_irq() on all paths. This matches the pattern already used by other lpi_xa iterators in the vgic ITS code. | ||||
| CVE-2026-89906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Refactor jump offset calculation in tail call The old macro-based jmp_offset calculation derives the jump distance from a stale prior-pass code stride, which can lead to wrong branch offsets and soft lockups under extra JIT passes. Fix this by calculating the offset directly on the absolute target: "ctx->offset[insn + 1] - ctx->idx". To avoid a false 16-bit range check abort during size estimation, add a "ctx->image == NULL" guard to inject a safe dummy offset. | ||||
| CVE-2026-89827 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid force-completing uninitialized UVD rings uvd_v7_0_sw_init() does not initialize the UVD decode ring for an SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes the decode ring when restoring its fence sequence. Skip fence completion when the fence driver is not initialized. | ||||
| CVE-2026-89812 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the MES ring fences on reset The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1 reset, while fence_drv.sync_seq keeps advancing for every packet. When the reset is triggered because MES itself stopped responding, the timed-out packets advance sync_seq past the last hw fence value MES wrote. After resume the first MES submission polls forever on a seq that is never written back, failing the resume and wedging the box on a second reset: amdgpu: MES ring buffer is full. amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110) amdgpu: resume of IP block <gfx_v11_0> failed -110 amdgpu: GPU reset end with ret = -110 Force complete the MES scheduler ring fences together with the scheduler rings so their hw fence is realigned to sync_seq. v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. | ||||
| CVE-2026-89806 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation The framebuffer size calculation `fb_size = linebytes * height` can overflow when both values are large (e.g., 46341 * 46341 > INT_MAX). Since linebytes and height are both int types, the multiplication is performed as int * int, which results in undefined behavior on overflow. Use check_mul_overflow() to detect and prevent this overflow, consistent with the approach used in simpledrm.c and corebootdrm.c. | ||||
| CVE-2026-89802 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix NULL deref unwinding an OP_MAP_SPARSE op Each bind_job_op is zeroed by kzalloc_obj() in bind_job_op_from_uop(), and the OP_MAP_SPARSE case in nouveau_uvmm_bind_job_submit() only creates a region, so op->ops stays NULL for a successfully processed sparse map. If a later op in the same job fails, the reverse unwind loop revisits that op and calls drm_gpuva_ops_free(&uvmm->base, op->ops) unconditionally. drm_gpuva_ops_free() dereferences its argument right away (list_for_each_entry_safe on &ops->list), so a NULL op->ops oopses. The path is reachable by any render-node fd holder, since NOUVEAU_VM_BIND is DRM_RENDER_ALLOW. Guard the free with IS_ERR_OR_NULL(), as nouveau_uvmm_bind_job_cleanup() already does for the identical free. | ||||
| CVE-2026-89755 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: clear stale mapping after freeing swapcache __migrate_device_pages() reads the folio mapping before calling folio_free_swap(). When folio_free_swap() succeeds, the folio is removed from the swap cache, but the saved mapping still points to swap_space. Passing the stale mapping to folio_migrate_mapping() makes it use the mapped-folio path for a folio that is no longer in swapcache. It can then operate on swap_space.i_pages with invalid reference accounting, eventually triggering a folio reference count BUG. After a successful split, nr still contains the number of pages in the original large folio, although each resulting page is now a separate order-0 folio. Reset nr to 1 so each split folio is processed separately, including its own swapcache removal and mapping lookup. Refresh the saved mapping after folio_free_swap() so the current folio state is used during migration. | ||||
| CVE-2026-89717 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: set default primary compressor in zram_destroy_comps() Patch series "zram: fix zram issues reported by sashiko". Sashiko drove by and reported [1] a couple of zram issues: a possible BUG_ON() in zlib code due to missing winbits range validation and one possible NULL-ptr dereference in zcomp. Both are low risk yet still worth fixing. This patch (of 2): zram_destroy_comps() resets all compressors and leaves them set to NULL, including the primary one, which is invalid device state, as now comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set default primary compressor in zram_destroy_comps(). | ||||
| CVE-2026-89705 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths nfsd_dispatch() sets rq_status_counter to an odd value once a request has been decoded, and back to an even value once it has been fully processed, forming a seq-lock like protocol with the lockless reader in nfsd_nl_rpc_status_get_dumpit(). Only the fully successful path restored the counter to even. The cache-hit (RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return after the odd-valued store without ever bringing the counter back to even. Once one of those paths is taken, rq_status_counter is left odd: the next request's decode ORs in 1 (still odd) and only a subsequent successful encode restores even. While stuck odd, the dumpit reader treats the rqstp fields as stable and its retry check compares against the same unchanging odd value, so it never detects concurrent mutation. This exposes actively mutating fields (e.g. args->ops / args->opcnt during compound decode and release) to the lockless reader, which can read past the end of the 8-element inline ops array. Add a helper that advances the counter to the next even value and call it on every return path that follows the odd-valued store. The decode-error path is left untouched as it is reached before the counter is set odd. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89624 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: universal-pidff: stop the device when force-feedback init fails universal_pidff_probe() starts the device with hid_hw_start() and then, if force-feedback initialisation fails, returns the error through a label that only does "return error". The device is left started. The HID core does not unwind on the driver's behalf. __hid_device_probe() releases the devres group, closes the report and clears hdev->driver: if (ret) { devres_release_group(&hdev->dev, hdev->devres_group_id); hid_close_report(hdev); hdev->driver = NULL; } The hidraw character device that hid_hw_start() registered through hid_connect() is allocated with kzalloc() and added with cdev_device_add(), so it is not devres-managed and survives that. With hdev->driver NULL, hid_device_remove() skips hid_hw_stop() as well, because it only unwinds while a driver is still attached. The registration therefore outlives the device on both paths. Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports a use-after-free write from hidraw_open() -> hid_hw_open() -> the transport's open callback, which takes a spinlock inside the freed object. A descriptor that carries a PID usage page and no input reports is enough: hidraw claims the device so hid_hw_start() succeeds, while hid->inputs stays empty so force-feedback init fails. The other failure returns in hid_pidff_init_with_quirks() - no output reports, an allocation failure, pidff_init_fields(), pidff_check_autocenter(), an unusable effect count, input_ff_create() - all reach the same label. Stop the device on that path. hid-dr.c and hid-emsff.c, which start the device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do this. The two earlier gotos must keep returning without hid_hw_stop(), since neither has a started device, so give the path that fails after the start its own label. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-89572 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: apple-soc: Fix OPP table cleanup apple_soc_cpufreq_init() adds OPP tables from firmware, but some failure paths do not remove them. The driver also uses dev_pm_opp_remove_all_dynamic(), which is not the right cleanup helper for OPP tables loaded from firmware. Use the cpumask OPP helper after the policy CPU mask has been populated. Pair it with the matching cpumask remove helper on failure paths and in apple_soc_cpufreq_exit(). This also removes the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask helper loads the DT OPP tables for all CPUs in the policy. | ||||
| CVE-2026-89567 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: bound shrinker scans by examined checkpoint buffers The jbd2 shrinker currently accounts only checkpoint buffers that it successfully releases against nr_to_scan. Busy buffers therefore do not consume the scan budget. If a checkpoint transaction contains mostly busy buffers, the shrinker can scan its entire checkpoint list while holding journal->j_list_lock. Large checkpoint lists can result in excessive lock hold times and leave other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls. Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for every buffer examined, including busy buffers. Pass NULL from checkpoint cleanup paths so their existing full-list behavior is preserved. This restores the scan-budget semantics that existed before journal_shrink_one_cp_list() was changed to always scan a complete checkpoint list. | ||||
| CVE-2026-89566 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: check need_resched() when skipping busy checkpoint buffers journal_shrink_one_cp_list() skips busy checkpoint buffers when called with JBD2_SHRINK_BUSY_SKIP. The continue statement on this path also skips the need_resched() check at the end of the loop body. Consequently, when a checkpoint list contains mostly busy buffers, the shrinker can walk the entire list while holding journal->j_list_lock, even when a reschedule has been requested. Large checkpoint lists under memory pressure can therefore cause long lock hold times and leave other CPUs spinning on j_list_lock, resulting in soft lockups or RCU stalls. Route the busy-buffer path through the need_resched() check so that the shrinker can release j_list_lock and reschedule promptly, restoring parity with the clean-buffer path, which already checks need_resched(). This does not change which checkpoint buffers are eligible for removal. | ||||
| CVE-2026-89534 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE, it creates a replacement listener cm_id and returns 1, telling the CM core to destroy the old one. If the replacement allocation fails, sc_cm_id still points at the old cm_id that the CM core is about to destroy. Any subsequent dereference of sc_cm_id -- such as svc_rdma_detach()'s rdma_disconnect() call -- is a use-after-free. NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s rdma_disconnect() call against NULL so that the listener can be torn down safely when the server shuts down. | ||||
| CVE-2026-89467 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: fix use-after-free qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service comes up, and the worker recovers battmgr through container_of() to issue firmware requests. The PMIC GLINK client stays on the client list until its devres release action runs, so a PDR notification can keep queueing the work, and a pending or running worker can access battmgr after devres frees it. Make enable_work device-managed with devm_work_autocancel(), registered before the PMIC GLINK client is allocated. The devres cleanup then releases the client first, so no further notification can queue the work, and cancels the work before battmgr is freed. This issue was found by an in-house static analysis tool. | ||||