Export limit exceeded: 26039 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26039 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23081 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: intel-xway: fix OF node refcount leakage Automated review spotted am OF node reference count leakage when checking if the 'leds' child node exists. Call of_put_node() to correctly maintain the refcount. | ||||
| CVE-2026-23051 | 1 Linux | 1 Linux Kernel | 2026-02-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix drm panic null pointer when driver not support atomic When driver not support atomic, fb using plane->fb rather than plane->state->fb. (cherry picked from commit 2f2a72de673513247cd6fae14e53f6c40c5841ef) | ||||
| CVE-2026-23109 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/writeback: skip AS_NO_DATA_INTEGRITY mappings in wait_sb_inodes() Above the while() loop in wait_sb_inodes(), we document that we must wait for all pages under writeback for data integrity. Consequently, if a mapping, like fuse, traditionally does not have data integrity semantics, there is no need to wait at all; we can simply skip these inodes. This restores fuse back to prior behavior where syncs are no-ops. This fixes a user regression where if a system is running a faulty fuse server that does not reply to issued write requests, this causes wait_sb_inodes() to wait forever. | ||||
| CVE-2026-23092 | 1 Linux | 1 Linux Kernel | 2026-02-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source When simple_write_to_buffer() succeeds, it returns the number of bytes actually copied to the buffer. The code incorrectly uses 'count' as the index for null termination instead of the actual bytes copied. If count exceeds the buffer size, this leads to out-of-bounds write. Add a check for the count and use the return value as the index. The bug was validated using a demo module that mirrors the original code and was tested under QEMU. Pattern of the bug: - A fixed 64-byte stack buffer is filled using count. - If count > 64, the code still does buf[count] = '\0', causing an - out-of-bounds write on the stack. Steps for reproduce: - Opens the device node. - Writes 128 bytes of A to it. - This overflows the 64-byte stack buffer and KASAN reports the OOB. Found via static analysis. This is similar to the commit da9374819eb3 ("iio: backend: fix out-of-bound write") | ||||
| CVE-2026-23079 | 1 Linux | 1 Linux Kernel | 2026-02-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify() On error handling paths, lineinfo_changed_notify() doesn't free the allocated resources which results leaks. Fix it. | ||||
| CVE-2026-23088 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash on synthetic stacktrace field usage When creating a synthetic event based on an existing synthetic event that had a stacktrace field and the new synthetic event used that field a kernel crash occurred: ~# cd /sys/kernel/tracing ~# echo 's:stack unsigned long stack[];' > dynamic_events ~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger ~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger The above creates a synthetic event that takes a stacktrace when a task schedules out in a non-running state and passes that stacktrace to the sched_switch event when that task schedules back in. It triggers the "stack" synthetic event that has a stacktrace as its field (called "stack"). ~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events ~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger ~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger The above makes another synthetic event called "syscall_stack" that attaches the first synthetic event (stack) to the sys_exit trace event and records the stacktrace from the stack event with the id of the system call that is exiting. When enabling this event (or using it in a historgram): ~# echo 1 > events/synthetic/syscall_stack/enable Produces a kernel crash! BUG: unable to handle page fault for address: 0000000000400010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:trace_event_raw_event_synth+0x90/0x380 Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f RSP: 0018:ffffd2670388f958 EFLAGS: 00010202 RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0 RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50 R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010 R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90 FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0 Call Trace: <TASK> ? __tracing_map_insert+0x208/0x3a0 action_trace+0x67/0x70 event_hist_trigger+0x633/0x6d0 event_triggers_call+0x82/0x130 trace_event_buffer_commit+0x19d/0x250 trace_event_raw_event_sys_exit+0x62/0xb0 syscall_exit_work+0x9d/0x140 do_syscall_64+0x20a/0x2f0 ? trace_event_raw_event_sched_switch+0x12b/0x170 ? save_fpregs_to_fpstate+0x3e/0x90 ? _raw_spin_unlock+0xe/0x30 ? finish_task_switch.isra.0+0x97/0x2c0 ? __rseq_handle_notify_resume+0xad/0x4c0 ? __schedule+0x4b8/0xd00 ? restore_fpregs_from_fpstate+0x3c/0x90 ? switch_fpu_return+0x5b/0xe0 ? do_syscall_64+0x1ef/0x2f0 ? do_fault+0x2e9/0x540 ? __handle_mm_fault+0x7d1/0xf70 ? count_memcg_events+0x167/0x1d0 ? handle_mm_fault+0x1d7/0x2e0 ? do_user_addr_fault+0x2c3/0x7f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reason is that the stacktrace field is not labeled as such, and is treated as a normal field and not as a dynamic event that it is. In trace_event_raw_event_synth() the event is field is still treated as a dynamic array, but the retrieval of the data is considered a normal field, and the reference is just the meta data: // Meta data is retrieved instead of a dynamic array ---truncated--- | ||||
| CVE-2026-23055 | 1 Linux | 1 Linux Kernel | 2026-02-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: riic: Move suspend handling to NOIRQ phase Commit 53326135d0e0 ("i2c: riic: Add suspend/resume support") added suspend support for the Renesas I2C driver and following this change on RZ/G3E the following WARNING is seen on entering suspend ... [ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 134.285536] ------------[ cut here ]------------ [ 134.290298] i2c i2c-2: Transfer while suspended [ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388 [ 134.365507] Tainted: [W]=WARN [ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT) [ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214 [ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214 [ 134.391717] sp : ffff800083f23860 [ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60 [ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001 [ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936 [ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006 [ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280 [ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09 [ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8 [ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000 [ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000 [ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80 [ 134.466851] Call trace: [ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P) [ 134.473715] i2c_smbus_xfer+0xbc/0x120 [ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84 [ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208] [ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208] [ 134.493226] __rtc_read_time+0x44/0x88 [ 134.497012] rtc_read_time+0x3c/0x68 [ 134.500622] rtc_suspend+0x9c/0x170 The warning is triggered because I2C transfers can still be attempted while the controller is already suspended, due to inappropriate ordering of the system sleep callbacks. If the controller is autosuspended, there is no way to wake it up once runtime PM disabled (in suspend_late()). During system resume, the I2C controller will be available only after runtime PM is re-enabled (in resume_early()). However, this may be too late for some devices. Wake up the controller in the suspend() callback while runtime PM is still enabled. The I2C controller will remain available until the suspend_noirq() callback (pm_runtime_force_suspend()) is called. During resume, the I2C controller can be restored by the resume_noirq() callback (pm_runtime_force_resume()). Finally, the resume() callback re-enables autosuspend. As a result, the I2C controller can remain available until the system enters suspend_noirq() and from resume_noirq(). | ||||
| CVE-2023-53619 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: Avoid nf_ct_helper_hash uses after free If nf_conntrack_init_start() fails (for example due to a register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini() clean-up path frees the nf_ct_helper_hash map. When built with NF_CONNTRACK=y, further netfilter modules (e.g: netfilter_conntrack_ftp) can still be loaded and call nf_conntrack_helpers_register(), independently of whether nf_conntrack initialized correctly. This accesses the nf_ct_helper_hash dangling pointer and causes a uaf, possibly leading to random memory corruption. This patch guards nf_conntrack_helper_register() from accessing a freed or uninitialized nf_ct_helper_hash pointer and fixes possible uses-after-free when loading a conntrack module. | ||||
| CVE-2023-53620 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: fix soft lockup in status_resync status_resync() will calculate 'curr_resync - recovery_active' to show user a progress bar like following: [============>........] resync = 61.4% 'curr_resync' and 'recovery_active' is updated in md_do_sync(), and status_resync() can read them concurrently, hence it's possible that 'curr_resync - recovery_active' can overflow to a huge number. In this case status_resync() will be stuck in the loop to print a large amount of '=', which will end up soft lockup. Fix the problem by setting 'resync' to MD_RESYNC_ACTIVE in this case, this way resync in progress will be reported to user. | ||||
| CVE-2023-53621 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: memcontrol: ensure memcg acquired by id is properly set up In the eviction recency check, we attempt to retrieve the memcg to which the folio belonged when it was evicted, by the memcg id stored in the shadow entry. However, there is a chance that the retrieved memcg is not the original memcg that has been killed, but a new one which happens to have the same id. This is a somewhat unfortunate, but acceptable and rare inaccuracy in the heuristics. However, if we retrieve this new memcg between its allocation and when it is properly attached to the memcg hierarchy, we could run into the following NULL pointer exception during the memcg hierarchy traversal done in mem_cgroup_get_nr_swap_pages(): [ 155757.793456] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 155757.807568] #PF: supervisor read access in kernel mode [ 155757.818024] #PF: error_code(0x0000) - not-present page [ 155757.828482] PGD 401f77067 P4D 401f77067 PUD 401f76067 PMD 0 [ 155757.839985] Oops: 0000 [#1] SMP [ 155757.887870] RIP: 0010:mem_cgroup_get_nr_swap_pages+0x3d/0xb0 [ 155757.899377] Code: 29 19 4a 02 48 39 f9 74 63 48 8b 97 c0 00 00 00 48 8b b7 58 02 00 00 48 2b b7 c0 01 00 00 48 39 f0 48 0f 4d c6 48 39 d1 74 42 <48> 8b b2 c0 00 00 00 48 8b ba 58 02 00 00 48 2b ba c0 01 00 00 48 [ 155757.937125] RSP: 0018:ffffc9002ecdfbc8 EFLAGS: 00010286 [ 155757.947755] RAX: 00000000003a3b1c RBX: 000007ffffffffff RCX: ffff888280183000 [ 155757.962202] RDX: 0000000000000000 RSI: 0007ffffffffffff RDI: ffff888bbc2d1000 [ 155757.976648] RBP: 0000000000000001 R08: 000000000000000b R09: ffff888ad9cedba0 [ 155757.991094] R10: ffffea0039c07900 R11: 0000000000000010 R12: ffff888b23a7b000 [ 155758.005540] R13: 0000000000000000 R14: ffff888bbc2d1000 R15: 000007ffffc71354 [ 155758.019991] FS: 00007f6234c68640(0000) GS:ffff88903f9c0000(0000) knlGS:0000000000000000 [ 155758.036356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 155758.048023] CR2: 00000000000000c0 CR3: 0000000a83eb8004 CR4: 00000000007706e0 [ 155758.062473] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 155758.076924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 155758.091376] PKRU: 55555554 [ 155758.096957] Call Trace: [ 155758.102016] <TASK> [ 155758.106502] ? __die+0x78/0xc0 [ 155758.112793] ? page_fault_oops+0x286/0x380 [ 155758.121175] ? exc_page_fault+0x5d/0x110 [ 155758.129209] ? asm_exc_page_fault+0x22/0x30 [ 155758.137763] ? mem_cgroup_get_nr_swap_pages+0x3d/0xb0 [ 155758.148060] workingset_test_recent+0xda/0x1b0 [ 155758.157133] workingset_refault+0xca/0x1e0 [ 155758.165508] filemap_add_folio+0x4d/0x70 [ 155758.173538] page_cache_ra_unbounded+0xed/0x190 [ 155758.182919] page_cache_sync_ra+0xd6/0x1e0 [ 155758.191738] filemap_read+0x68d/0xdf0 [ 155758.199495] ? mlx5e_napi_poll+0x123/0x940 [ 155758.207981] ? __napi_schedule+0x55/0x90 [ 155758.216095] __x64_sys_pread64+0x1d6/0x2c0 [ 155758.224601] do_syscall_64+0x3d/0x80 [ 155758.232058] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 155758.242473] RIP: 0033:0x7f62c29153b5 [ 155758.249938] Code: e8 48 89 75 f0 89 7d f8 48 89 4d e0 e8 b4 e6 f7 ff 41 89 c0 4c 8b 55 e0 48 8b 55 e8 48 8b 75 f0 8b 7d f8 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 e7 e6 f7 ff 48 8b [ 155758.288005] RSP: 002b:00007f6234c5ffd0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 [ 155758.303474] RAX: ffffffffffffffda RBX: 00007f628c4e70c0 RCX: 00007f62c29153b5 [ 155758.318075] RDX: 000000000003c041 RSI: 00007f61d2986000 RDI: 0000000000000076 [ 155758.332678] RBP: 00007f6234c5fff0 R08: 0000000000000000 R09: 0000000064d5230c [ 155758.347452] R10: 000000000027d450 R11: 0000000000000293 R12: 000000000003c041 [ 155758.362044] R13: 00007f61d2986000 R14: 00007f629e11b060 R15: 000000000027d450 [ 155758.376661] </TASK> This patch fixes the issue by moving the memcg's id publication from the alloc stage to ---truncated--- | ||||
| CVE-2023-53622 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix possible data races in gfs2_show_options() Some fields such as gt_logd_secs of the struct gfs2_tune are accessed without holding the lock gt_spin in gfs2_show_options(): val = sdp->sd_tune.gt_logd_secs; if (val != 30) seq_printf(s, ",commit=%d", val); And thus can cause data races when gfs2_show_options() and other functions such as gfs2_reconfigure() are concurrently executed: spin_lock(>->gt_spin); gt->gt_logd_secs = newargs->ar_commit; To fix these possible data races, the lock sdp->sd_tune.gt_spin is acquired before accessing the fields of gfs2_tune and released after these accesses. Further changes by Andreas: - Don't hold the spin lock over the seq_printf operations. | ||||
| CVE-2023-53623 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix swap_info_struct race between swapoff and get_swap_pages() The si->lock must be held when deleting the si from the available list. Otherwise, another thread can re-add the si to the available list, which can lead to memory corruption. The only place we have found where this happens is in the swapoff path. This case can be described as below: core 0 core 1 swapoff del_from_avail_list(si) waiting try lock si->lock acquire swap_avail_lock and re-add si into swap_avail_head acquire si->lock but missing si already being added again, and continuing to clear SWP_WRITEOK, etc. It can be easily found that a massive warning messages can be triggered inside get_swap_pages() by some special cases, for example, we call madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile, run much swapon-swapoff operations (e.g. stress-ng-swap). However, in the worst case, panic can be caused by the above scene. In swapoff(), the memory used by si could be kept in swap_info[] after turning off a swap. This means memory corruption will not be caused immediately until allocated and reset for a new swap in the swapon path. A panic message caused: (with CONFIG_PLIST_DEBUG enabled) ------------[ cut here ]------------ top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70 Modules linked in: rfkill(E) crct10dif_ce(E)... CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+ Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) pc : plist_check_prev_next_node+0x50/0x70 lr : plist_check_prev_next_node+0x50/0x70 sp : ffff0018009d3c30 x29: ffff0018009d3c40 x28: ffff800011b32a98 x27: 0000000000000000 x26: ffff001803908000 x25: ffff8000128ea088 x24: ffff800011b32a48 x23: 0000000000000028 x22: ffff001800875c00 x21: ffff800010f9e520 x20: ffff001800875c00 x19: ffff001800fdc6e0 x18: 0000000000000030 x17: 0000000000000000 x16: 0000000000000000 x15: 0736076307640766 x14: 0730073007380731 x13: 0736076307640766 x12: 0730073007380731 x11: 000000000004058d x10: 0000000085a85b76 x9 : ffff8000101436e4 x8 : ffff800011c8ce08 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff0017df9ed338 x4 : 0000000000000001 x3 : ffff8017ce62a000 x2 : ffff0017df9ed340 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: plist_check_prev_next_node+0x50/0x70 plist_check_head+0x80/0xf0 plist_add+0x28/0x140 add_to_avail_list+0x9c/0xf0 _enable_swap_info+0x78/0xb4 __do_sys_swapon+0x918/0xa10 __arm64_sys_swapon+0x20/0x30 el0_svc_common+0x8c/0x220 do_el0_svc+0x2c/0x90 el0_svc+0x1c/0x30 el0_sync_handler+0xa8/0xb0 el0_sync+0x148/0x180 irq event stamp: 2082270 Now, si->lock locked before calling 'del_from_avail_list()' to make sure other thread see the si had been deleted and SWP_WRITEOK cleared together, will not reinsert again. This problem exists in versions after stable 5.10.y. | ||||
| CVE-2023-53624 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_fq: fix integer overflow of "credit" if sch_fq is configured with "initial quantum" having values greater than INT_MAX, the first assignment of "credit" does signed integer overflow to a very negative value. In this situation, the syzkaller script provided by Cristoph triggers the CPU soft-lockup warning even with few sockets. It's not an infinite loop, but "credit" wasn't probably meant to be minus 2Gb for each new flow. Capping "initial quantum" to INT_MAX proved to fix the issue. v2: validation of "initial quantum" is done in fq_policy, instead of open coding in fq_change() _ suggested by Jakub Kicinski | ||||
| CVE-2023-53625 | 1 Linux | 1 Linux Kernel | 2026-02-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gvt: fix vgpu debugfs clean in remove Check carefully on root debugfs available when destroying vgpu, e.g in remove case drm minor's debugfs root might already be destroyed, which led to kernel oops like below. Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14 BUG: kernel NULL pointer dereference, address: 0000000000000150 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6 Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022 RIP: 0010:__lock_acquire+0x5e2/0x1f90 Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0 RSP: 0018:ffff9f770274f948 EFLAGS: 00010046 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire+0xbf/0x2b0 ? simple_recursive_removal+0xa5/0x2b0 ? lock_release+0x13d/0x2d0 down_write+0x2a/0xd0 ? simple_recursive_removal+0xa5/0x2b0 simple_recursive_removal+0xa5/0x2b0 ? start_creating.part.0+0x110/0x110 ? _raw_spin_unlock+0x29/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt] intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt] intel_vgpu_release_dev+0xe/0x20 [kvmgt] device_release+0x30/0x80 kobject_put+0x79/0x1b0 device_release_driver_internal+0x1b8/0x230 bus_remove_device+0xec/0x160 device_del+0x189/0x400 ? up_write+0x9c/0x1b0 ? mdev_device_remove_common+0x60/0x60 [mdev] mdev_device_remove_common+0x22/0x60 [mdev] mdev_device_remove_cb+0x17/0x20 [mdev] device_for_each_child+0x56/0x80 mdev_unregister_parent+0x5a/0x81 [mdev] intel_gvt_clean_device+0x2d/0xe0 [kvmgt] intel_gvt_driver_remove+0x2e/0xb0 [i915] i915_driver_remove+0xac/0x100 [i915] i915_pci_remove+0x1a/0x30 [i915] pci_device_remove+0x31/0xa0 device_release_driver_internal+0x1b8/0x230 unbind_store+0xd8/0x100 kernfs_fop_write_iter+0x156/0x210 vfs_write+0x236/0x4a0 ksys_write+0x61/0xd0 do_syscall_64+0x55/0x80 ? find_held_lock+0x2b/0x80 ? lock_release+0x13d/0x2d0 ? up_read+0x17/0x20 ? lock_is_held_type+0xe3/0x140 ? asm_exc_page_fault+0x22/0x30 ? lockdep_hardirqs_on+0x7d/0x100 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fc9b2c9e0c4 Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4 RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001 RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30 R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00 </TASK> Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm ---truncated--- | ||||
| CVE-2023-47150 | 2 Ibm, Linux | 4 Aix, Common Cryptographic Architecture, I and 1 more | 2026-02-04 | 7.5 High |
| IBM Common Cryptographic Architecture (CCA) 7.0.0 through 7.5.36 could allow a remote user to cause a denial of service due to incorrect data handling for certain types of AES operations. IBM X-Force ID: 270602. | ||||
| CVE-2022-50553 | 1 Linux | 1 Linux Kernel | 2026-02-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx' When generate a synthetic event with many params and then create a trace action for it [1], kernel panic happened [2]. It is because that in trace_action_create() 'data->n_params' is up to SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx' keeps indices into array 'hist_data->var_refs' for each synthetic event param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX (current value is 16), so out-of-bound write happened when 'data->n_params' more than 16. In this case, 'data->match_data.event' is overwritten and eventually cause the panic. To solve the issue, adjust the length of 'data->var_ref_idx' to be SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write. [1] # cd /sys/kernel/tracing/ # echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\ int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\ int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\ int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\ int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\ int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\ int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\ int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\ int v63" >> synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \ events/sched/sched_waking/trigger # echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger [2] BUG: unable to handle page fault for address: ffff91c900000000 PGD 61001067 P4D 61001067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:strcmp+0xc/0x30 Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3 RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000 RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000 R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580 R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538 FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0 Call Trace: <TASK> __find_event_file+0x55/0x90 action_create+0x76c/0x1060 event_hist_trigger_parse+0x146d/0x2060 ? event_trigger_write+0x31/0xd0 trigger_process_regex+0xbb/0x110 event_trigger_write+0x6b/0xd0 vfs_write+0xc8/0x3e0 ? alloc_fd+0xc0/0x160 ? preempt_count_add+0x4d/0xa0 ? preempt_count_add+0x70/0xa0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1d1d0cf077 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077 RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001 RBP: 00005639265aa7e0 R08: 000000000000000a R09: 0000000000000142 R ---truncated--- | ||||
| CVE-2022-50552 | 1 Linux | 1 Linux Kernel | 2026-02-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0 | ||||
| CVE-2022-50551 | 1 Linux | 1 Linux Kernel | 2026-02-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example. Found by a modified version of syzkaller. UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? pr ---truncated--- | ||||
| CVE-2022-50550 | 1 Linux | 1 Linux Kernel | 2026-02-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's. | ||||
| CVE-2022-50549 | 1 Linux | 1 Linux Kernel | 2026-02-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata Following concurrent processes: P1(drop cache) P2(kworker) drop_caches_sysctl_handler drop_slab shrink_slab down_read(&shrinker_rwsem) - LOCK A do_shrink_slab super_cache_scan prune_icache_sb dispose_list evict ext4_evict_inode ext4_clear_inode ext4_discard_preallocations ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_read_bh_nowait submit_bh dm_submit_bio do_worker process_deferred_bios commit metadata_operation_failed dm_pool_abort_metadata down_write(&pmd->root_lock) - LOCK B __destroy_persistent_data_objects dm_block_manager_destroy dm_bufio_client_destroy unregister_shrinker down_write(&shrinker_rwsem) thin_map | dm_thin_find_block ↓ down_read(&pmd->root_lock) --> ABBA deadlock , which triggers hung task: [ 76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds. [ 76.976019] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.978521] task:kworker/u4:3 state:D stack:0 pid:63 ppid:2 [ 76.978534] Workqueue: dm-thin do_worker [ 76.978552] Call Trace: [ 76.978564] __schedule+0x6ba/0x10f0 [ 76.978582] schedule+0x9d/0x1e0 [ 76.978588] rwsem_down_write_slowpath+0x587/0xdf0 [ 76.978600] down_write+0xec/0x110 [ 76.978607] unregister_shrinker+0x2c/0xf0 [ 76.978616] dm_bufio_client_destroy+0x116/0x3d0 [ 76.978625] dm_block_manager_destroy+0x19/0x40 [ 76.978629] __destroy_persistent_data_objects+0x5e/0x70 [ 76.978636] dm_pool_abort_metadata+0x8e/0x100 [ 76.978643] metadata_operation_failed+0x86/0x110 [ 76.978649] commit+0x6a/0x230 [ 76.978655] do_worker+0xc6e/0xd90 [ 76.978702] process_one_work+0x269/0x630 [ 76.978714] worker_thread+0x266/0x630 [ 76.978730] kthread+0x151/0x1b0 [ 76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds. [ 76.979756] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.982111] task:test.sh state:D stack:0 pid:2646 ppid:2459 [ 76.982128] Call Trace: [ 76.982139] __schedule+0x6ba/0x10f0 [ 76.982155] schedule+0x9d/0x1e0 [ 76.982159] rwsem_down_read_slowpath+0x4f4/0x910 [ 76.982173] down_read+0x84/0x170 [ 76.982177] dm_thin_find_block+0x4c/0xd0 [ 76.982183] thin_map+0x201/0x3d0 [ 76.982188] __map_bio+0x5b/0x350 [ 76.982195] dm_submit_bio+0x2b6/0x930 [ 76.982202] __submit_bio+0x123/0x2d0 [ 76.982209] submit_bio_noacct_nocheck+0x101/0x3e0 [ 76.982222] submit_bio_noacct+0x389/0x770 [ 76.982227] submit_bio+0x50/0xc0 [ 76.982232] submit_bh_wbc+0x15e/0x230 [ 76.982238] submit_bh+0x14/0x20 [ 76.982241] ext4_read_bh_nowait+0xc5/0x130 [ 76.982247] ext4_read_block_bitmap_nowait+0x340/0xc60 [ 76.982254] ext4_mb_init_cache+0x1ce/0xdc0 [ 76.982259] ext4_mb_load_buddy_gfp+0x987/0xfa0 [ 76.982263] ext4_discard_preallocations+0x45d/0x830 [ 76.982274] ext4_clear_inode+0x48/0xf0 [ 76.982280] ext4_evict_inode+0xcf/0xc70 [ 76.982285] evict+0x119/0x2b0 [ 76.982290] dispose_list+0x43/0xa0 [ 76.982294] prune_icache_sb+0x64/0x90 [ 76.982298] super_cache_scan+0x155/0x210 [ 76.982303] do_shrink_slab+0x19e/0x4e0 [ 76.982310] shrink_slab+0x2bd/0x450 [ 76.982317] drop_slab+0xcc/0x1a0 [ 76.982323] drop_caches_sysctl_handler+0xb7/0xe0 [ 76.982327] proc_sys_call_handler+0x1bc/0x300 [ 76.982331] proc_sys_write+0x17/0x20 [ 76.982334] vfs_write+0x3d3/0x570 [ 76.982342] ksys_write+0x73/0x160 [ 76.982347] __x64_sys_write+0x1e/0x30 [ 76.982352] do_syscall_64+0x35/0x80 [ 76.982357] entry_SYSCALL_64_after_hwframe+0x63/0xcd Funct ---truncated--- | ||||