Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26013 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26013 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23316 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix ARM64 alignment fault in multipath hash seed `struct sysctl_fib_multipath_hash_seed` contains two u32 fields (user_seed and mp_seed), making it an 8-byte structure with a 4-byte alignment requirement. In `fib_multipath_hash_from_keys()`, the code evaluates the entire struct atomically via `READ_ONCE()`: mp_seed = READ_ONCE(net->ipv4.sysctl_fib_multipath_hash_seed).mp_seed; While this silently works on GCC by falling back to unaligned regular loads which the ARM64 kernel tolerates, it causes a fatal kernel panic when compiled with Clang and LTO enabled. Commit e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y") strengthens `READ_ONCE()` to use Load-Acquire instructions (`ldar` / `ldapr`) to prevent compiler reordering bugs under Clang LTO. Since the macro evaluates the full 8-byte struct, Clang emits a 64-bit `ldar` instruction. ARM64 architecture strictly requires `ldar` to be naturally aligned, thus executing it on a 4-byte aligned address triggers a strict Alignment Fault (FSC = 0x21). Fix the read side by moving the `READ_ONCE()` directly to the `u32` member, which emits a safe 32-bit `ldar Wn`. Furthermore, Eric Dumazet pointed out that `WRITE_ONCE()` on the entire struct in `proc_fib_multipath_hash_set_seed()` is also flawed. Analysis shows that Clang splits this 8-byte write into two separate 32-bit `str` instructions. While this avoids an alignment fault, it destroys atomicity and exposes a tear-write vulnerability. Fix this by explicitly splitting the write into two 32-bit `WRITE_ONCE()` operations. Finally, add the missing `READ_ONCE()` when reading `user_seed` in `proc_fib_multipath_hash_seed()` to ensure proper pairing and concurrency safety. | ||||
| CVE-2026-23314 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio() In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns without calling of_node_put(child), causing the device node reference leak. | ||||
| CVE-2026-23323 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver The recently added macsmc-hwmon driver contained several critical bugs in its sensor population logic and float conversion routines. Specifically: - The voltage sensor population loop used the wrong prefix ("volt-" instead of "voltage-") and incorrectly assigned sensors to the temperature sensor array (hwmon->temp.sensors) instead of the voltage sensor array (hwmon->volt.sensors). This would lead to out-of-bounds memory access or data corruption when both temperature and voltage sensors were present. - The float conversion in macsmc_hwmon_write_f32() had flawed exponent logic for values >= 2^24 and lacked masking for the mantissa, which could lead to incorrect values being written to the SMC. Fix these issues to ensure correct sensor registration and reliable manual fan control. Confirm that the reported overflow in FIELD_PREP is fixed by declaring macsmc_hwmon_write_f32() as __always_inline for a compile test. | ||||
| CVE-2026-23324 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: usb: etas_es58x: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also. | ||||
| CVE-2026-23423 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: free pages on error in btrfs_uring_read_extent() In this function the 'pages' object is never freed in the hopes that it is picked up by btrfs_uring_read_finished() whenever that executes in the future. But that's just the happy path. Along the way previous allocations might have gone wrong, or we might not get -EIOCBQUEUED from btrfs_encoded_read_regular_fill_pages(). In all these cases, we go to a cleanup section that frees all memory allocated by this function without assuming any deferred execution, and this also needs to happen for the 'pages' allocation. | ||||
| CVE-2026-23426 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/logicvc: Fix device node reference leak in logicvc_drm_config_parse() The logicvc_drm_config_parse() function calls of_get_child_by_name() to find the "layers" node but fails to release the reference, leading to a device node reference leak. Fix this by using the __free(device_node) cleanup attribute to automatic release the reference when the variable goes out of scope. | ||||
| CVE-2026-23430 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Don't overwrite KMS surface dirty tracker We were overwriting the surface's dirty tracker here causing a memory leak. | ||||
| CVE-2026-23431 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: amlogic-spisg: Fix memory leak in aml_spisg_probe() In aml_spisg_probe(), ctlr is allocated by spi_alloc_target()/spi_alloc_host(), but fails to call spi_controller_put() in several error paths. This leads to a memory leak whenever the driver fails to probe after the initial allocation. Convert to use devm_spi_alloc_host()/devm_spi_alloc_target() to fix the memory leak. | ||||
| CVE-2026-23432 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix use-after-free in mshv_map_user_memory error path In the error path of mshv_map_user_memory(), calling vfree() directly on the region leaves the MMU notifier registered. When userspace later unmaps the memory, the notifier fires and accesses the freed region, causing a use-after-free and potential kernel panic. Replace vfree() with mshv_partition_put() to properly unregister the MMU notifier before freeing the region. | ||||
| CVE-2026-23433 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Fix null pointer dereference when restoring bandwidth counters When an MSC supporting memory bandwidth monitoring is brought offline and then online, mpam_restore_mbwu_state() calls __ris_msmon_read() via ipi to restore the configuration of the bandwidth counters. It doesn't care about the value read, mbwu_arg.val, and doesn't set it leading to a null pointer dereference when __ris_msmon_read() adds to it. This results in a kernel oops with a call trace such as: Call trace: __ris_msmon_read+0x19c/0x64c (P) mpam_restore_mbwu_state+0xa0/0xe8 smp_call_on_cpu_callback+0x1c/0x38 process_one_work+0x154/0x4b4 worker_thread+0x188/0x310 kthread+0x11c/0x130 ret_from_fork+0x10/0x20 Provide a local variable for val to avoid __ris_msmon_read() dereferencing a null pointer when adding to val. | ||||
| CVE-2026-23435 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86: Move event pointer setup earlier in x86_pmu_enable() A production AMD EPYC system crashed with a NULL pointer dereference in the PMU NMI handler: BUG: kernel NULL pointer dereference, address: 0000000000000198 RIP: x86_perf_event_update+0xc/0xa0 Call Trace: <NMI> amd_pmu_v2_handle_irq+0x1a6/0x390 perf_event_nmi_handler+0x24/0x40 The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0, corresponding to the `if (unlikely(!hwc->event_base))` check in x86_perf_event_update() where hwc = &event->hw and event is NULL. drgn inspection of the vmcore on CPU 106 showed a mismatch between cpuc->active_mask and cpuc->events[]: active_mask: 0x1e (bits 1, 2, 3, 4) events[1]: 0xff1100136cbd4f38 (valid) events[2]: 0x0 (NULL, but active_mask bit 2 set) events[3]: 0xff1100076fd2cf38 (valid) events[4]: 0xff1100079e990a90 (valid) The event that should occupy events[2] was found in event_list[2] with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run (which clears hw.state and sets active_mask) but events[2] was never populated. Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH), showing it was stopped when the PMU rescheduled events, confirming the throttle-then-reschedule sequence occurred. The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") which moved the cpuc->events[idx] assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(), after the PERF_HES_ARCH check. This broke any path that calls pmu->start() without going through x86_pmu_enable() -- specifically the unthrottle path: perf_adjust_freq_unthr_events() -> perf_event_unthrottle_group() -> perf_event_unthrottle() -> event->pmu->start(event, 0) -> x86_pmu_start() // sets active_mask but not events[] The race sequence is: 1. A group of perf events overflows, triggering group throttle via perf_event_throttle_group(). All events are stopped: active_mask bits cleared, events[] preserved (x86_pmu_stop no longer clears events[] after commit 7e772a93eb61). 2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs due to other scheduling activity. Stopped events that need to move counters get PERF_HES_ARCH set and events[old_idx] cleared. In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events to be skipped -- events[new_idx] is never set. 3. The timer tick unthrottles the group via pmu->start(). Since commit 7e772a93eb61 removed the events[] assignment from x86_pmu_start(), active_mask[new_idx] is set but events[new_idx] remains NULL. 4. A PMC overflow NMI fires. The handler iterates active counters, finds active_mask[2] set, reads events[2] which is NULL, and crashes dereferencing it. Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to before the PERF_HES_ARCH check, so that events[] is populated even for events that are not immediately started. This ensures the unthrottle path via pmu->start() always finds a valid event pointer. | ||||
| CVE-2026-23436 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: shaper: protect from late creation of hierarchy We look up a netdev during prep of Netlink ops (pre- callbacks) and take a ref to it. Then later in the body of the callback we take its lock or RCU which are the actual protections. The netdev may get unregistered in between the time we take the ref and the time we lock it. We may allocate the hierarchy after flush has already run, which would lead to a leak. Take the instance lock in pre- already, this saves us from the race and removes the need for dedicated lock/unlock callbacks completely. After all, if there's any chance of write happening concurrently with the flush - we're back to leaking the hierarchy. We may take the lock for devices which don't support shapers but we're only dealing with SET operations here, not taking the lock would be optimizing for an error case. | ||||
| CVE-2026-23441 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent concurrent access to IPSec ASO context The query or updating IPSec offload object is through Access ASO WQE. The driver uses a single mlx5e_ipsec_aso struct for each PF, which contains a shared DMA-mapped context for all ASO operations. A race condition exists because the ASO spinlock is released before the hardware has finished processing WQE. If a second operation is initiated immediately after, it overwrites the shared context in the DMA area. When the first operation's completion is processed later, it reads this corrupted context, leading to unexpected behavior and incorrect results. This commit fixes the race by introducing a private context within each IPSec offload object. The shared ASO context is now copied to this private context while the ASO spinlock is held. Subsequent processing uses this saved, per-object context, ensuring its integrity is maintained. | ||||
| CVE-2026-31437 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix NULL pointer dereference in netfs_unbuffered_write() on retry When a write subrequest is marked NETFS_SREQ_NEED_RETRY, the retry path in netfs_unbuffered_write() unconditionally calls stream->prepare_write() without checking if it is NULL. Filesystems such as 9P do not set the prepare_write operation, so stream->prepare_write remains NULL. When get_user_pages() fails with -EFAULT and the subrequest is flagged for retry, this results in a NULL pointer dereference at fs/netfs/direct_write.c:189. Fix this by mirroring the pattern already used in write_retry.c: if stream->prepare_write is NULL, skip renegotiation and directly reissue the subrequest via netfs_reissue_write(), which handles iterator reset, IN_PROGRESS flag, stats update and reissue internally. | ||||
| CVE-2025-1241 | 4 Apple, Fortra, Linux and 1 more | 6 Macos, Goanywhere Agents, Goanywhere Managed File Transfer and 3 more | 2026-04-23 | 5.8 Medium |
| Encrypted values in Fortra's GoAnywhere MFT prior to version 7.10.0 and GoAnywhere Agents prior to version 2.2.0 utilize a static IV which allows admin users to brute-force decryption of data. | ||||
| CVE-2026-22986 | 1 Linux | 1 Linux Kernel | 2026-04-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix race condition for gdev->srcu If two drivers were calling gpiochip_add_data_with_key(), one may be traversing the srcu-protected list in gpio_name_to_desc(), meanwhile other has just added its gdev in gpiodev_add_to_list_unlocked(). This creates a non-mutexed and non-protected timeframe, when one instance is dereferencing and using &gdev->srcu, before the other has initialized it, resulting in crash: [ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000 [ 4.943396] Mem abort info: [ 4.943400] ESR = 0x0000000096000005 [ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.943407] SET = 0, FnV = 0 [ 4.943410] EA = 0, S1PTW = 0 [ 4.943413] FSC = 0x05: level 1 translation fault [ 4.943416] Data abort info: [ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000 [ 4.961449] [ffff800272bcc000] pgd=0000000000000000 [ 4.969203] , p4d=1000000039739003 [ 4.979730] , pud=0000000000000000 [ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset" [ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP ... [ 5.121359] pc : __srcu_read_lock+0x44/0x98 [ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0 [ 5.153671] sp : ffff8000833bb430 [ 5.298440] [ 5.298443] Call trace: [ 5.298445] __srcu_read_lock+0x44/0x98 [ 5.309484] gpio_name_to_desc+0x60/0x1a0 [ 5.320692] gpiochip_add_data_with_key+0x488/0xf00 5.946419] ---[ end trace 0000000000000000 ]--- Move initialization code for gdev fields before it is added to gpio_devices, with adjacent initialization code. Adjust goto statements to reflect modified order of operations [Bartosz: fixed a build issue, removed stray newline] | ||||
| CVE-2026-5281 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-21 | 8.8 High |
| Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2025-71230 | 1 Linux | 1 Linux Kernel | 2026-04-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs: ensure sb->s_fs_info is always cleaned up When hfs was converted to the new mount api a bug was introduced by changing the allocation pattern of sb->s_fs_info. If setup_bdev_super() fails after a new superblock has been allocated by sget_fc(), but before hfs_fill_super() takes ownership of the filesystem-specific s_fs_info data it was leaked. Fix this by freeing sb->s_fs_info in hfs_kill_super(). | ||||
| CVE-2025-71237 | 1 Linux | 1 Linux Kernel | 2026-04-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: Fix potential block overflow that cause system hang When a user executes the FITRIM command, an underflow can occur when calculating nblocks if end_block is too small. Since nblocks is of type sector_t, which is u64, a negative nblocks value will become a very large positive integer. This ultimately leads to the block layer function __blkdev_issue_discard() taking an excessively long time to process the bio chain, and the ns_segctor_sem lock remains held for a long period. This prevents other tasks from acquiring the ns_segctor_sem lock, resulting in the hang reported by syzbot in [1]. If the ending block is too small, typically if it is smaller than 4KiB range, depending on the usage of the segment 0, it may be possible to attempt a discard request beyond the device size causing the hang. Exiting successfully and assign the discarded size (0 in this case) to range->len. Although the start and len values in the user input range are too small, a conservative strategy is adopted here to safely ignore them, which is equivalent to a no-op; it will not perform any trimming and will not throw an error. [1] task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000 Call Trace: rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272 nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline] nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684 [ryusuke: corrected part of the commit message about the consequences] | ||||
| CVE-2025-71229 | 1 Linux | 1 Linux Kernel | 2026-04-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon() rtw_core_enable_beacon() reads 4 bytes from an address that is not a multiple of 4. This results in a crash on some systems. Do 1 byte reads/writes instead. Unable to handle kernel paging request at virtual address ffff8000827e0522 Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000 [ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13 Internal error: Oops: 0000000096000021 [#1] SMP Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...] CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY Tainted: [W]=WARN Hardware name: FriendlyElec NanoPC-T6 LTS (DT) Workqueue: phy0 rtw_c2h_work [rtw88_core] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : rtw_pci_read32+0x18/0x40 [rtw88_pci] lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core] sp : ffff800080cc3ca0 x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828 x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00 x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001 x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522 Call trace: rtw_pci_read32+0x18/0x40 [rtw88_pci] (P) rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core] rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core] rtw_c2h_work+0x50/0x98 [rtw88_core] process_one_work+0x178/0x3f8 worker_thread+0x208/0x418 kthread+0x120/0x220 ret_from_fork+0x10/0x20 Code: d28fe202 8b020000 f9524400 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- | ||||