Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (417953 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-113401 1 Mozilla 1 Firefox 2026-10-20 6.5 Medium
Denial-of-service in the PDF Viewer component. This vulnerability was fixed in Firefox 158.0.1 and Thunderbird 158.0.1.
CVE-2026-113392 1 Draytek 2 Vigor2960, Vigor2960 Firmware 2026-10-20 7.4 High
A vulnerability was found in DrayTek Vigor2960 1.5.1.6 Revision 8218. This vulnerability affects unknown code of the file /cgi-bin/mainfunction.cgi of the component Apmupload. Performing a manipulation of the argument action results in path traversal. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 1.5.1.7 is able to resolve this issue. Upgrading the affected component is advised. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
CVE-2026-113393 1 Draytek 2 Vigor2960, Vigor2960 Firmware 2026-10-20 6.3 Medium
A vulnerability was determined in DrayTek Vigor2960 1.5.1.6 Revision 8218. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi of the component commonupload. Executing a manipulation of the argument upload_path/upload_name can lead to unrestricted upload. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. Upgrading to version 1.5.1.7 is capable of addressing this issue. It is advisable to upgrade the affected component. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
CVE-2026-103119 3 Apache, Apache Software Foundation, Redhat 4 Apache Tomcat, Tomcat, Tomcat and 1 more 2026-10-20 9.1 Critical
Buffer under-read vulnerability in Apache Tomcat meant that a large non-blocking write could result in the response body being split between the current request and the next request received on that connection leading most likely to failure of the second request and possibly leakage of data from the first response to the second. This issue affects Apache Tomcat: from 11.0.0-M25 through 11.0.26. Users are recommended to upgrade to version 11.0.27, which fixes the issue.
CVE-2026-43842 1 Advantech 1 Adam-3600 2026-10-20 N/A
A NULL pointer dereference vulnerability in the license manager service could allow an unauthenticated attacker to crash the service via the rpc_rx_fsm function when msglen is set to 0.
CVE-2026-98566 1 Linux 1 Linux Kernel 2026-10-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: clamp freelist reconstruction requests The firmware reconstruction count controls accesses to the request's fixed freelist ID array and the copy into the fixed response array. Neither access currently bounds the count to those protocol arrays. Clamp the count to the request capacity, which is shared by the response layout, and use that count consistently for reconstruction and response publication. Keep the firmware recovery exchange instead of dropping an oversized request without a response, as discussed with the firmware maintainer. The issue was found by our static-analysis tool.
CVE-2026-98592 1 Linux 1 Linux Kernel 2026-10-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: net: spacemit: clear TX descriptor on fragment mapping failure emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for every slot beyond old_head as soon as that slot's memset()'d local copy is committed with "*tx_desc_addr = tx_desc", i.e. before the buffers for that slot have necessarily all been mapped successfully. If emac_tx_map_frag() then fails on a later fragment, the err_free_skb path calls emac_free_tx_buf() to unmap and drop the skb, but leaves the already-written descriptor memory untouched, and tx_ring->head is never advanced past old_head (the "tx_ring->head = head" store is skipped by the goto). So a slot between old_head and the rolled-back head can be left with TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that emac_free_tx_buf() just tore down, while software considers that slot free again. The next successful emac_tx_mem_map() call only rebuilds old_head itself; if the DMA engine auto-advances into the following descriptor once it finishes old_head's packet, it will fetch that stale, already-unmapped address. emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing the descriptor as a pair when reclaiming completed descriptors; do the same in the mapping failure path.
CVE-2026-98702 1 Linux 1 Linux Kernel 2026-10-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read.
CVE-2026-98801 1 Linux 1 Linux Kernel 2026-10-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: restrict SO_RESERVE_MEM to TCP sockets and cap max value Commit 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") and commit d00c8ee31729 ("net: fix possible NULL deref in sock_reserve_memory") only checked sk_has_account(sk), which is true for both TCP and UDP sockets. However, SO_RESERVE_MEM and sk_unused_reserved_mem() are currently only supported by TCP: - On UDP sockets, sk->sk_forward_alloc is protected by sk->sk_receive_queue.lock, whereas sock_reserve_memory() and sock_release_reserved_memory() only acquire lock_sock(sk). Concurrent UDP packet reception/release and setsockopt(SO_RESERVE_MEM) corrupt sk_forward_alloc and memcg accounting. - udp_rmem_release() reclaims excess sk_forward_alloc without accounting for sk_unused_reserved_mem(sk). Restrict sock_reserve_memory() to TCP sockets (sk_is_tcp(sk)) for now. Supporting SO_RESERVE_MEM for UDP (acquiring sk_receive_queue.lock and honoring sk_unused_reserved_mem() in udp_rmem_release()) can be done in a future net-next series if needed. In addition, reject val > SZ_1G with -EINVAL in sk_setsockopt(SO_RESERVE_MEM). Without an upper bound, values near INT_MAX cause sk_mem_pages(delta) and (pages << PAGE_SHIFT) to overflow 32-bit signed int, corrupting sk->sk_forward_alloc and sk->sk_reserved_mem. Using a page-aligned cap (SZ_1G) ensures that the page-rounded sk->sk_reserved_mem reported by getsockopt(SO_RESERVE_MEM) can always be passed back to setsockopt(SO_RESERVE_MEM).
CVE-2026-86963 1 Apple 1 Ios And Ipados 2026-10-20 5.9 Medium
A denial-of-service issue was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27. An attacker in a privileged network position may be able to cause a denial-of-service.
CVE-2026-110031 1 Wordpress-extensions 1 Salon Booking System 2026-10-20 7.2 High
The Salon Booking System WordPress plugin before 10.31.11 does not prevent users holding its custom salon staff role from assigning arbitrary capabilities to other accounts when editing a customer, allowing them to escalate any account to administrator and take over the site.
CVE-2026-113404 1 Uniong 1 Webitr 2026-10-20 8.8 High
WebITR developed by Uniong has a Insecure Deserialization vulnerability. Authenticated remote attackers can use the hard-coded cryptographic key to craft and submit malicious serialized data, thereby executing arbitrary code on the server.
CVE-2026-113506 1 Aapanel 1 Aapanel 2026-10-20 9.9 Critical
A vulnerability has been found in aaPanel up to 8.25.0. The affected element is the function ExecShell of the file class/public/common.py of the component File Manager. The manipulation of the argument sfile/dfile/access/user leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor confirms: "The reported RCE and LFI vulnerabilities require authentication."
CVE-2026-76788 1 Zephyrproject 1 Zephyr 2026-10-20 8.8 High
The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated struct osdp_event. For the REPLY_KEYPPAD and REPLY_RAW reply types, the payload length is taken from the received frame and the only validation performed is that the declared length is self-consistent with the number of payload bytes present in the frame. Because the attacker controls both the length field and the frame length, that check imposes no bound, and the subsequent memcpy() writes into the fixed 64-byte data arrays of struct osdp_event_keypress / struct osdp_event_cardread (OSDP_EVENT_MAX_DATALEN). The sibling REPLY_FMT handler in the same switch already carried the missing > OSDP_EVENT_MAX_DATALEN bound. The defect is reached from cp_process_reply(), which reads bytes from the OSDP RS-485 channel and passes them through osdp_phy_check_packet() and osdp_phy_decode_packet() before dispatching on the reply ID. Triggering it requires CONFIG_OSDP with CONFIG_OSDP_MODE_CP and an application event callback registered (the normal Control Panel integration), plus a frame carrying a correct SOM, a valid CRC-16, and a matching 2-bit sequence number — all of which are computable or observable by anyone on the bus. No check ties the reply ID to the outstanding command, so an oversized REPLY_KEYPPAD or REPLY_RAW is accepted as the answer to a routine CMD_POLL. A malicious or compromised card reader, or anyone with access to the RS-485 wiring, can supply such a frame; CONFIG_OSDP_SC_ENABLED only helps while a secure channel is active, and a single unauthenticated frame carrying a bad MAC causes sc_deactivate(), after which plaintext replies are again accepted. With the default CONFIG_OSDP_UART_BUFFER_LENGTH of 256, roughly 180 bytes of fully attacker-chosen data can be written past the end of the stack-allocated event object, over saved registers and the return address on typical Cortex-M and RISC-V frame layouts (Zephyr does not enable stack canaries by default). The impact ranges from a hard crash of the access-control panel to potential control-flow hijack in the context of the OSDP receive thread. The fix adds an OSDP_EVENT_MAX_DATALEN bound to both handlers, capping each memcpy() at the size of its destination.
CVE-2026-76787 1 Zephyrproject 1 Zephyr 2026-10-20 5.9 Medium
The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only.
CVE-2026-71563 2 Apache, Apache Software Foundation 2 Answer, Apache Answer 2026-10-20 4.3 Medium
Missing Authorization vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. An authorization flaw in the MCP answer retrieval tool allows holders of a global API key to access answer content associated with hidden, deleted, or pending-review questions. Users are recommended to upgrade to version 2.0.3, which fixes the issue.
CVE-2026-69080 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-20 7.5 High
Exposure of SQL Black List to an Unauthorized Actor vulnerability in Apache Kylin. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-69077 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-20 7.5 High
Exposure of unauthorized cross-project job manipulation vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-68498 1 Fasterxml 1 Jackson-core 2026-10-20 7.5 High
StreamReadConstraints.maxNameLength (default 50,000 characters) is intended to bound how much memory a single JSON Object property name can consume while being parsed, independently of the much larger maxStringLength (default 100,000,000 characters) that bounds ordinary string values. For parsers built over character input — Reader, String or char[] sources, all served by ReaderBasedJsonParser — that bound is not applied while the name is being accumulated. The code path instead re-uses the string-value length check, which is roughly 2000x larger by default. In the character-input slow path, ReaderBasedJsonParser._parseName2() accumulates the name into the TextBuffer and, when a segment fills, calls TextBuffer.finishCurrentSegment(), which validates only maxStringLength. The correct check, StreamReadConstraints.validateNameLength(int), is reached afterwards in CharsToNameCanonicalizer.findSymbol(), once the entire name has been scanned to its closing quote. By that point the full name — up to maxStringLength characters — has already been buffered in memory. A remote attacker who can have a single sufficiently long JSON Object property name parsed through this path can force allocation on the order of 100,000,000 characters (approximately 200 MB, with segment bookkeeping pushing real peak usage higher) before any StreamConstraintsException is thrown, instead of the approximately 50,000-character (about 100 KB) bound the API promises. Repeating this across concurrent requests can exhaust the heap and crash the process. No authentication or user interaction is required. Because StreamReadConstraints.maxDocumentLength is disabled by default (-1), nothing else bounds the token first, so the issue is exploitable under default configuration. Byte-input parsers are not affected: UTF8StreamJsonParser, UTF8DataInputJsonParser and the non-blocking (async) parsers re-validate maxNameLength on every growth of the name-decode buffer via ParserBase._growNameDecodeBuffer(), rejecting an oversized name after allocating only tens of kilobytes. Applications are exposed when untrusted JSON is parsed from a String, Reader or char[] — for example an HTTP request body already read into a String — rather than from raw UTF-8 bytes. This issue affects com.fasterxml.jackson.core:jackson-core from 2.16.0 and tools.jackson.core:jackson-core from 3.0.0. Releases before 2.16.0 are not affected, because StreamReadConstraints.maxNameLength was first introduced in jackson-core 2.16.0.
CVE-2026-64943 2 Apache, Apache Software Foundation 2 Answer, Apache Answer 2026-10-20 8.1 High
Insertion of Sensitive Information into Log File vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. Full API keys are written to application logs on every authenticated request, allowing anyone with log-read access to recover and replay active bearer credentials. Users are recommended to upgrade to version 2.0.3, which fixes the issue.