Export limit exceeded: 25959 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25959 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31456 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix race between concurrent split and refault The splitting of a PUD entry in walk_pud_range() can race with a concurrent thread refaulting the PUD leaf entry causing it to try walking a PMD range that has disappeared. An example and reproduction of this is to try reading numa_maps of a process while VFIO-PCI is setting up DMA (specifically the vfio_pin_pages_remote call) on a large BAR for that process. This will trigger a kernel BUG: vfio-pci 0000:03:00.0: enabling device (0000 -> 0002) BUG: unable to handle page fault for address: ffffa23980000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI ... RIP: 0010:walk_pgd_range+0x3b5/0x7a0 Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24 28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06 9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74 RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287 RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0 RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000 R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000 R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000 FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __walk_page_range+0x195/0x1b0 walk_page_vma+0x62/0xc0 show_numa_map+0x12b/0x3b0 seq_read_iter+0x297/0x440 seq_read+0x11d/0x140 vfs_read+0xc2/0x340 ksys_read+0x5f/0xe0 do_syscall_64+0x68/0x130 ? get_page_from_freelist+0x5c2/0x17e0 ? mas_store_prealloc+0x17e/0x360 ? vma_set_page_prot+0x4c/0xa0 ? __alloc_pages_noprof+0x14e/0x2d0 ? __mod_memcg_lruvec_state+0x8d/0x140 ? __lruvec_stat_mod_folio+0x76/0xb0 ? __folio_mod_stat+0x26/0x80 ? do_anonymous_page+0x705/0x900 ? __handle_mm_fault+0xa8d/0x1000 ? __count_memcg_events+0x53/0xf0 ? handle_mm_fault+0xa5/0x360 ? do_user_addr_fault+0x342/0x640 ? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0 ? irqentry_exit_to_user_mode+0x24/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fe88464f47e Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003 RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000 R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> Fix this by validating the PUD entry in walk_pmd_range() using a stable snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the walk via ACTION_AGAIN instead of descending further. This mirrors the retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the PTE is not being got by pte_offset_map_lock(). | ||||
| CVE-2026-45979 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clean up the amdgpu_cs_parser_bos In low memory conditions, kmalloc can fail. In such conditions unlock the mutex for a clean exit. We do not need to amdgpu_bo_list_put as it's been handled in the amdgpu_cs_parser_fini. | ||||
| CVE-2026-45958 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: fix to avoid directly dereferencing user pointer In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it. | ||||
| CVE-2026-45960 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values. | ||||
| CVE-2026-22998 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT → both pointers NULL 2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot → both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated | ||||
| CVE-2026-22999 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: do not free existing class in qfq_change_class() Fixes qfq_change_class() error case. cl->qdisc and cl should only be freed if a new class and qdisc were allocated, or we risk various UAF. | ||||
| CVE-2026-22991 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: make free_choose_arg_map() resilient to partial allocation free_choose_arg_map() may dereference a NULL pointer if its caller fails after a partial allocation. For example, in decode_choose_args(), if allocation of arg_map->args fails, execution jumps to the fail label and free_choose_arg_map() is called. Since arg_map->size is updated to a non-zero value before memory allocation, free_choose_arg_map() will iterate over arg_map->args and dereference a NULL pointer. To prevent this potential NULL pointer dereference and make free_choose_arg_map() more resilient, add checks for pointers before iterating. | ||||
| CVE-2026-22984 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in handle_auth_done() Perform an explicit bounds check on payload_len to avoid a possible out-of-bounds access in the callout. [ idryomov: changelog ] | ||||
| CVE-2026-23074 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s └── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF. | ||||
| CVE-2026-23209 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix error recovery in macvlan_common_newlink() valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: <quote valis> The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, ¶ms, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). </quote valis> With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue. | ||||
| CVE-2026-23193 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count() In iscsit_dec_session_usage_count(), the function calls complete() while holding the sess->session_usage_lock. Similar to the connection usage count logic, the waiter signaled by complete() (e.g., in the session release path) may wake up and free the iscsit_session structure immediately. This creates a race condition where the current thread may attempt to execute spin_unlock_bh() on a session structure that has already been deallocated, resulting in a KASAN slab-use-after-free. To resolve this, release the session_usage_lock before calling complete() to ensure all dereferences of the sess pointer are finished before the waiter is allowed to proceed with deallocation. | ||||
| CVE-2026-23001 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u | ||||
| CVE-2025-40363 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix field-spanning memcpy warning in AH output Fix field-spanning memcpy warnings in ah6_output() and ah6_output_done() where extension headers are copied to/from IPv6 address fields, triggering fortify-string warnings about writes beyond the 16-byte address fields. memcpy: detected field-spanning write (size 40) of single field "&top_iph->saddr" at net/ipv6/ah6.c:439 (size 16) WARNING: CPU: 0 PID: 8838 at net/ipv6/ah6.c:439 ah6_output+0xe7e/0x14e0 net/ipv6/ah6.c:439 The warnings are false positives as the extension headers are intentionally placed after the IPv6 header in memory. Fix by properly copying addresses and extension headers separately, and introduce helper functions to avoid code duplication. | ||||
| CVE-2025-68372 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nbd: defer config put in recv_work There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and NBD_CMD_RECONFIGURE: nbd_genl_connect // conf_ref=2 (connect and recv_work A) nbd_open // conf_ref=3 recv_work A done // conf_ref=2 NBD_CLEAR_SOCK // conf_ref=1 nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B) close nbd // conf_ref=1 recv_work B config_put // conf_ref=0 atomic_dec(&config->recv_threads); -> UAF Or only running NBD_CLEAR_SOCK: nbd_genl_connect // conf_ref=2 nbd_open // conf_ref=3 NBD_CLEAR_SOCK // conf_ref=2 close nbd nbd_release config_put // conf_ref=1 recv_work config_put // conf_ref=0 atomic_dec(&config->recv_threads); -> UAF Commit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying the waiter") moved nbd_config_put() to run before waking up the waiter in recv_work, in order to ensure that nbd_start_device_ioctl() would not be woken up while nbd->task_recv was still uncleared. However, in nbd_start_device_ioctl(), after being woken up it explicitly calls flush_workqueue() to make sure all current works are finished. Therefore, there is no need to move the config put ahead of the wakeup. Move nbd_config_put() to the end of recv_work, so that the reference is held for the whole lifetime of the worker thread. This makes sure the config cannot be freed while recv_work is still running, even if clear + reconfigure interleave. In addition, we don't need to worry about recv_work dropping the last nbd_put (which causes deadlock): path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT): connect // nbd_refs=1 (trigger recv_work) open nbd // nbd_refs=2 NBD_CLEAR_SOCK close nbd nbd_release nbd_disconnect_and_put flush_workqueue // recv_work done nbd_config_put nbd_put // nbd_refs=1 nbd_put // nbd_refs=0 queue_work path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT): connect // nbd_refs=2 (trigger recv_work) open nbd // nbd_refs=3 NBD_CLEAR_SOCK // conf_refs=2 close nbd nbd_release nbd_config_put // conf_refs=1 nbd_put // nbd_refs=2 recv_work done // conf_refs=0, nbd_refs=1 rmmod // nbd_refs=0 Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put") | ||||
| CVE-2025-68185 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfs4_setup_readdir(): insufficient locking for ->d_parent->d_inode dereferencing Theoretically it's an oopsable race, but I don't believe one can manage to hit it on real hardware; might become doable on a KVM, but it still won't be easy to attack. Anyway, it's easy to deal with - since xdr_encode_hyper() is just a call of put_unaligned_be64(), we can put that under ->d_lock and be done with that. | ||||
| CVE-2025-68740 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ima: Handle error code returned by ima_filter_rule_match() In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to the rule being NULL, the function incorrectly skips the 'if (!rc)' check and sets 'result = true'. The LSM rule is considered a match, causing extra files to be measured by IMA. This issue can be reproduced in the following scenario: After unloading the SELinux policy module via 'semodule -d', if an IMA measurement is triggered before ima_lsm_rules is updated, in ima_match_rules(), the first call to ima_filter_rule_match() returns -ESTALE. This causes the code to enter the 'if (rc == -ESTALE && !rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In ima_lsm_copy_rule(), since the SELinux module has been removed, the rule becomes NULL, and the second call to ima_filter_rule_match() returns -ENOENT. This bypasses the 'if (!rc)' check and results in a false match. Call trace: selinux_audit_rule_match+0x310/0x3b8 security_audit_rule_match+0x60/0xa0 ima_match_rules+0x2e4/0x4a0 ima_match_policy+0x9c/0x1e8 ima_get_action+0x48/0x60 process_measurement+0xf8/0xa98 ima_bprm_check+0x98/0xd8 security_bprm_check+0x5c/0x78 search_binary_handler+0x6c/0x318 exec_binprm+0x58/0x1b8 bprm_execve+0xb8/0x130 do_execveat_common.isra.0+0x1a8/0x258 __arm64_sys_execve+0x48/0x68 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x44/0x200 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x3c8/0x3d0 Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error codes like -ENOENT do not bypass the check and accidentally result in a successful match. | ||||
| CVE-2025-68287 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths This patch addresses a race condition caused by unsynchronized execution of multiple call paths invoking `dwc3_remove_requests()`, leading to premature freeing of USB requests and subsequent crashes. Three distinct execution paths interact with `dwc3_remove_requests()`: Path 1: Triggered via `dwc3_gadget_reset_interrupt()` during USB reset handling. The call stack includes: - `dwc3_ep0_reset_state()` - `dwc3_ep0_stall_and_restart()` - `dwc3_ep0_out_start()` - `dwc3_remove_requests()` - `dwc3_gadget_del_and_unmap_request()` Path 2: Also initiated from `dwc3_gadget_reset_interrupt()`, but through `dwc3_stop_active_transfers()`. The call stack includes: - `dwc3_stop_active_transfers()` - `dwc3_remove_requests()` - `dwc3_gadget_del_and_unmap_request()` Path 3: Occurs independently during `adb root` execution, which triggers USB function unbind and bind operations. The sequence includes: - `gserial_disconnect()` - `usb_ep_disable()` - `dwc3_gadget_ep_disable()` - `dwc3_remove_requests()` with `-ESHUTDOWN` status Path 3 operates asynchronously and lacks synchronization with Paths 1 and 2. When Path 3 completes, it disables endpoints and frees 'out' requests. If Paths 1 or 2 are still processing these requests, accessing freed memory leads to a crash due to use-after-free conditions. To fix this added check for request completion and skip processing if already completed and added the request status for ep0 while queue. | ||||
| CVE-2025-68366 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nbd: defer config unlock in nbd_genl_connect There is one use-after-free warning when running NBD_CMD_CONNECT and NBD_CLEAR_SOCK: nbd_genl_connect nbd_alloc_and_init_config // config_refs=1 nbd_start_device // config_refs=2 set NBD_RT_HAS_CONFIG_REF open nbd // config_refs=3 recv_work done // config_refs=2 NBD_CLEAR_SOCK // config_refs=1 close nbd // config_refs=0 refcount_inc -> uaf ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 24 PID: 1014 at lib/refcount.c:25 refcount_warn_saturate+0x12e/0x290 nbd_genl_connect+0x16d0/0x1ab0 genl_family_rcv_msg_doit+0x1f3/0x310 genl_rcv_msg+0x44a/0x790 The issue can be easily reproduced by adding a small delay before refcount_inc(&nbd->config_refs) in nbd_genl_connect(): mutex_unlock(&nbd->config_lock); if (!ret) { set_bit(NBD_RT_HAS_CONFIG_REF, &config->runtime_flags); + printk("before sleep\n"); + mdelay(5 * 1000); + printk("after sleep\n"); refcount_inc(&nbd->config_refs); nbd_connect_reply(info, nbd->index); } | ||||
| CVE-2026-46030 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/versalnet: Fix device_node leak in mc_probe() of_parse_phandle() returns a device_node reference that must be released with of_node_put(). The original code never freed r5_core_node on any exit path, causing a memory leak. Fix this by using the automatic cleanup attribute __free(device_node) which ensures of_node_put() is called when the variable goes out of scope. | ||||
| CVE-2026-46031 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Reinstate disabling of BHs around IRQ handler If the driver executes ks8851_irq() AND a TX packet has been sent, then the driver enables TX queue via netif_wake_queue() which schedules TX softirq to queue packets for this device. If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to allocate SKBs for the received packets. If netdev_alloc_skb_ip_align() is called with BH enabled, then local_bh_enable() at the end of netdev_alloc_skb_ip_align() will trigger the pending softirq processing, which may ultimately call the .xmit callback ks8851_start_xmit_par(). The ks8851_start_xmit_par() will try to lock struct ks8851_net_par .lock spinlock, which is already locked by ks8851_irq() from which ks8851_start_xmit_par() was called. This leads to a deadlock, which is reported by the kernel, including a trace listed below. If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0 ("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock can also be triggered without received packet in the RX FIFO. The pending softirqs will be processed on return from spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the deadlock as well. Fix the problem by disabling BH around critical sections, including the IRQ handler, thus preventing the net_tx_action() softirq from triggering during these critical sections. The net_tx_action() softirq is triggered once BH are re-enabled and at the end of the IRQ handler, once all the other IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28 | ||||