Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (417953 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99013 1 Linux 2 Linux, Linux Kernel 2026-10-24 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Reject concurrent BIS listener setup iso_sock_listen() drops the socket lock before calling iso_listen_bis() to preserve the hdev->lock ordering. Two concurrent listen() calls on the same broadcast socket can therefore both observe BT_BOUND. Caller A can attach connA and release the locks, then caller B can acquire them and attach connB before A publishes BT_LISTEN. __iso_chan_add() checks whether connB already has a socket, but not whether the socket already has a connection. The second attachment overwrites iso_pi(sk)->conn, leaking the connA reference and leaving connA->sk intact. Socket teardown follows connB, so later events on connA can cause a stale socket access. Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking both the HCI device and socket locks in iso_listen_bis(). The connection check also covers the interval between attachment and publication of BT_LISTEN. Reject a competing setup with -EBADFD through the existing unlock path before allocating another connection. A recorded KASAN report from an instrumented kernel shows: BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0 Call Trace: iso_sock_hold+0x119/0x1f0 iso_conn_del+0xe4/0x270 hci_disconn_complete_evt+0x351/0x8c0 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 Allocated by task 93: sk_prot_alloc+0x113/0x220 sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 93: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 sock_close+0x10/0x20
CVE-2026-99079 1 Linux 2 Linux, Linux Kernel 2026-10-24 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on refill retry When an XDP redirect to an AF_XDP socket fails because its RX ring is full, the XSK core frees the buffer. During the subsequent batched refill of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before allocating a replacement. If that refill succeeds only partially, a WQE left without a replacement retains its old buffer pointer. The buffer can meanwhile be allocated to another WQE. A later refill retry can then free the live buffer through the stale pointer and publish the same UMEM frame twice. Mark the WQE as released immediately after the driver-side free. The flag is already cleared when a replacement buffer is assigned, so refill retries no longer release stale pointers. The failure is silent and produces no kernel warning or splat. A standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914 packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64 ownership/double-publication errors. With this change it processed 356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events, with no ownership or data errors.
CVE-2026-99081 1 Linux 2 Linux, Linux Kernel 2026-10-24 7.5 High
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix DMA mapping length for padded small packets Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412 NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces: DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000 [fault reason 0x06] PTE Read access is not set bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001 ... NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out The fault address (0xfc499000) is on an exact 4KB page boundary, pointing to a DMA read buffer overrun. In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes), such as 42-byte untagged ARP frames, are padded: if (length < BNXT_MIN_PKT_SIZE) { pad = BNXT_MIN_PKT_SIZE - length; if (skb_pad(skb, pad)) goto tx_kick_pending; length = BNXT_MIN_PKT_SIZE; } mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); ... dma_unmap_len_set(tx_buf, len, len); However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes) and is left unadjusted after padding. Consequently, dma_map_single() and dma_unmap_len_set() map and track only 42 bytes. Later, the hardware TX buffer descriptor is programmed with the padded length: txbd->tx_bd_len_flags_type = cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags | TX_BD_FLAGS_PACKET_END); The NIC DMA engine is thus instructed to read 52 bytes from a region where only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB page (within 'pad' bytes of the next page), the hardware DMA read overruns into the unmapped adjacent page, triggering an IOMMU fault. This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic and races when toggling HW VLAN offload") because reserving extra VLAN headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data offsets and potentially causing small frames to land right against page boundaries. Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled, because padding might linearize the skb. This ensures skb->len and skb_headlen(skb) reflect the padded size so that dma_map_single() maps the full buffer and the descriptor length is consistent. This also removes the temporary 'pad' variable and masking logic. The padding is done after the SW USO branch, otherwise bnxt_sw_udp_gso_xmit() would account the padding as UDP payload and send it in extra segments. Note that SW USO segments are still not padded: with IPv4, a segment carrying less than 10 bytes of UDP payload (small gso_size, or a short last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE. This is a separate issue, left for a followup patch.
CVE-2026-99082 1 Linux 2 Linux, Linux Kernel 2026-10-24 8.8 High
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass.
CVE-2026-109969 2 Red Hat, Redhat 4 Enterprise Linux, Enterprise Linux, Openshift and 1 more 2026-10-24 4.7 Medium
A flaw was found in the clevis PKCS#11 pin. The clevis-pkcs11-afunix-socket-unlock daemon creates AF_UNIX sockets without explicit permission restrictions or peer credential verification. Under a permissive process umask, any local user can connect to the control socket and inject arbitrary device/key pairs, or connect to the data socket to receive LUKS passphrases.
CVE-2026-17591 3 Libarchive, Red Hat, Redhat 5 Libarchive, Enterprise Linux, Enterprise Linux and 2 more 2026-10-24 3.6 Low
A flaw was found in libarchive. An attacker can cause a Denial of Service (DoS) or potential information disclosure due to a use-after-free vulnerability, which occurs when a program reads memory that has already been released. This issue arises when the archive_entry_copy_mac_metadata() function deallocates an internal buffer before completing a data copy. An attacker who can supply input to an application utilizing this function can trigger the flaw to crash the application or read uninitialized memory data.
CVE-2026-115424 1 Redhat 2 Openshift, Openshift Container Platform 2026-10-24 5.5 Medium
A flaw was found in the OpenShift client oc. When extracting container image layers with oc image extract, the application fails to properly sanitize symbolic and hard link targets pointing to absolute paths or to sibling directories of the extraction destination. An attacker who supplies a malicious container image can exploit this vulnerability by embedding links, and a chained file entry, that reference locations outside the intended extraction directory. This allows the attacker to write attacker-controlled content to arbitrary locations on the host filesystem with the privileges of the user running the command, potentially leading to file modification outside the destination directory.
CVE-2026-98870 1 Linux 2 Linux, Linux Kernel 2026-10-24 8.8 High
In the Linux kernel, the following vulnerability has been resolved: ksmbd: remove stale channels from all sessions on teardown ksmbd_sessions_deregister() removes a connection's channels from other sessions' channel lists only while conn->binding is still set: if (conn->binding) { hash_for_each_safe(sessions_table, ...) ksmbd_chann_del(conn, sess); } conn->binding is a transient flag: it is cleared once a binding SESSION_SETUP completes, and also by a subsequent non-binding SESSION_SETUP on the same connection (a reauthentication on a bound channel, or a new SessionId==0 setup). A connection that has bound a channel into another session's ksmbd_chann_list and then clears conn->binding leaves that channel behind when it disconnects: the channel, whose chann->conn points at the now freed struct ksmbd_conn, stays on the owner session's list. When the owning connection later tears down, the second loop dereferences the stale channel: xa_for_each(&sess->ksmbd_chann_list, chann_id, chann) if (chann->conn != conn) ksmbd_conn_set_exiting(chann->conn); /* freed */ which is a use-after-free write into the freed ksmbd_conn (the same stale channel is also walked by show_proc_session() through /proc). The session is leaked as well, because its channel list never empties. Remove the conn->binding gate so a connection always removes its channels from every session on teardown.
CVE-2026-98927 1 Linux 2 Linux, Linux Kernel 2026-10-24 7 High
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix life cycle of the nested_mmus array The nested_mmus array holds the shadow page tables that are used when a guest is running a nested context. These structures are allocated on VCPU_INIT for whole guest, which implies that they may have to be relocated as the array grows. Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and that the allocation requires relocation, that vcpu will still be running with a pointer to the previous structure, which will have been freed. Fix this by turning the array of structures to an array of pointers, which is now allocated at VM creation, sized to the absolute maximum that KVM can handle. In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No reallocation is ever performed, and the life cycle of each object is much clearer: - the nested_mmus array is allocated in kvm_init_nested(), and freed in kvm_arch_destroy_vm() - s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed on kvm_arch_flush_shadow_all() Finally, the freeing of vcpu->arch.vncr_array is made consistent rather than being done on some failure paths, but not others.
CVE-2026-98952 1 Linux 2 Linux, Linux Kernel 2026-10-24 7.3 High
In the Linux kernel, the following vulnerability has been resolved: pfcp: make sure the SEID is linear before reading it pfcp_encap_recv() only makes sure that the UDP header and the 4 byte PFCP header are in the linear area. When the S flag is set, pfcp_session_recv() then reads the 8 byte SEID that follows, which is not covered by the pskb_may_pull() check. A short PFCP packet with the S flag set, or one whose session header lies in a fragment, therefore makes pfcp_session_recv() read beyond the end of the packet data, and whatever it finds there is stored in the tunnel metadata that flower later classifies on. Pull up to the end of the SEID before reading it, and drop packets that are too short to contain it. Reload the header pointer afterwards since pskb_may_pull() may reallocate the skb head. Use offsetofend() rather than sizeof(struct pfcphdr_session): the structure is not packed, so its size is 16 bytes because of the alignment of the __be64 member, while the header on the wire is only 12 bytes, and valid session messages would be dropped.
CVE-2026-98974 1 Linux 2 Linux, Linux Kernel 2026-10-24 7.8 High
In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range-to-eof file size exchange Norbert Szetei posted a patch containing an incomplete description of a bug in XFS_IOC_EXCHANGE_RANGE's TO_EOF flag. The bug tricks exchange-range into modifying a file so that it has shared blocks starting beyond EOF, which is never allowed because files never have written data beyond EOF, and you can only share written data blocks. This is key to all the incorrect behavior that follows. Eventually I got from Norbert a description of what's going wrong: > Fair. Here it is with physical block numbers, 4k blocks. peer is the file > that gets rewritten and file1 is the one that ends up with the flag > cleared. > > Start, nothing shared: > > peer size 4096 -> [100] > file1 size 12288 -> [200] [201] [202] > donor1 size 4096 -> [300] > donor2 size 4096 -> [400] > > 1. FICLONERANGE peer's block into file1's middle slot: > > peer size 4096 -> [100] > file1 size 12288 -> [200] [100] [202] reflink flag set > ^^^^^ both files own block 100 > > 2. XFS_IOC_EXCHANGE_RANGE file1 against donor1, file1_offset 0, > file2_offset 8192, length 0, TO_EOF. One block is exchanged, and the sizes > are exchanged with it: > > file1 size 4096 -> [200] [100] [300] reflink flag set > ^^^^^^^^^^^ still owned, now past the size > donor1 size 12288 -> [202] > > file1 says it is one block long while it still owns three. Nothing was > unmapped. file2_offset is block 2, so this exchange cannot clear a flag. > > 3. XFS_IOC_EXCHANGE_RANGE file1 against donor2, both offsets 0, length 4096. > By i_disk_size this is two one-block files exchanging everything, so > xmi_can_exchange_reflink_flags() agrees and the flag is cleared: > > file1 size 4096 -> [400] [100] [300] reflink flag CLEARED > donor2 size 4096 -> [200] > > Block 100 is still shared with peer. > > 4. pwrite(file1, 4096, 4096), which is file1's second slot, block 100. > xfs_is_cow_inode(file1) is false, so no CoW: > > peer size 4096 -> [100] same block, new contents > > Block 100 is the only one that matters here. PoC below, it reads a file > called peer in the current directory. The filesystem needs reflink and > exchange-range, which mkfs.xfs 7.x turns on by default. So yes, TO_EOF is screwing up the file size even if it's actually exchanging the data block correctly. The following is the intended behavior of XFS_EXCHANGE_RANGE_TO_EOF, as described by its manpage: "Ignore the length parameter. All bytes in file1_fd from file1_offset to EOF are moved to file2_fd, and file2's size is set to (file2_offset+(file1_length-file1_offset)). Meanwhile, all bytes in file2 from file2_offset to EOF are moved to file1 and file1's size is set to (file1_offset+(file2_length-file2_offset))." In other words, if we only exchange a portion of the file data, then we should only exchange the portion of the file size that relates to the exchanged data. Unfortunately, the code swaps the ondisk file size and the incore file sizes, which is incorrect if the caller passes in a nonzero offset. Having confused the file sizes, the PoC uses a second exchange-range call on what looks like a non-reflinked single-block file. Because the file size is set incorrectly, exchange-range thinks it's exchanging the full contents of two files and clears the reflink flag on the broken file. That enables an extending write of the broken file to rewrite the shared block that's just past EOF. This has become known colloquially as refluxfs. Once the file sizes are set correctly, the second exchange-range no longer thinks that it's doing a full-contents swap, so it won't clear the reflink flag on either of its file arguments. Norbert followed up to an earlier version of this patch with a second complaint about us not handling the i_disk_size state correctly: > The offsets are bounded against the incore i_size but subtracted from > ---truncated---
CVE-2026-99002 1 Linux 2 Linux, Linux Kernel 2026-10-24 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate pitch coming from userspace Validate the pitch, alongside the box dimensions before trying to copy data from the underlying surface. Fixes possible out of bounds reads with cursor snooping.
CVE-2026-98385 1 Linux 1 Linux Kernel 2026-10-24 7.8 High
In the Linux kernel, the following vulnerability has been resolved: sched/cache: Decouple sched_cache_group from mm to fix UAF Currently the sched cache grouping is by mm and the scheduling statistics sched_cache_stat lives in the mm structure. This ties the life cycle of scheduling stats with mm. In account_mm_sched(), the scheduling stats are accessed by task->mm->sc_stat. However, a task may be switching mm on one CPU when another CPU is running account_mm_sched(), and possibly accessing the old mm that was freed. This problem was found when running tests with KASAN by Hyunwoo: https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/ Instead of serializing the mm access by introducing extra acquisition of rq lock in the mm free path, extract sched_cache_stat from mm_struct, rename it as sched_cache_group and manage its life cycle apart from mm_struct with its own ref counting. This allows us in the next patch access sched_cache_group directly from task, and add a refcount on sched_cache_group when a task links to it. This prevents the use after free issue when accessing stale and released old mm and its sched cache stat a task switches to a new mm while account_mm_sched() is done elsewhere. The other benefit of this restructure is in the future, the grouping of tasks to a LLC would have the flexibility to be associated with a user defined grouping, or cgroup, cookie group, numa_group or others instead of just with a single mm address space. Rename sched_cache_stat to sched_cache_group and turn it into a refcounted object allocated from mm_struct. The mm_struct now holds a pointer (sched_cache_grp) to this object instead of embedding it.
CVE-2026-69996 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-24 7.5 High
Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network.
CVE-2026-69991 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-24 7.5 High
Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network.
CVE-2026-70293 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-24 5.5 Medium
Use of uninitialized resource in Windows Win32 Kernel Subsystem allows an authorized attacker to disclose information locally.
CVE-2026-69736 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-24 7 High
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Credential Manager allows an authorized attacker to elevate privileges locally.
CVE-2026-83786 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-24 4.7 Medium
Generation of error message containing sensitive information in Windows NTFS allows an authorized attacker to disclose information locally.
CVE-2026-98436 1 Linux 1 Linux Kernel 2026-10-24 7.8 High
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Disable device buffer exporting Device buffers are never intended to be exported. Disable exporting support explicitly.
CVE-2026-98988 1 Linux 2 Linux, Linux Kernel 2026-10-24 8.8 High
In the Linux kernel, the following vulnerability has been resolved: namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change.