Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (417953 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-112390 2 Python, Python-pillow 2 Pillow, Pillow 2026-10-23 7.5 High
Pillow is a Python imaging library. From 7.2.0 until 13.0.0, Pillow can enter an infinite loop while determining the frame count of a MIC image. MicImageFile inherits TIFF frame traversal, but MicImageFile.tell reports the OLE stream index and its seek() resets TIFF frame state, so an embedded TIFF with at least three IFDs never advances. When an application with olefile installed reads n_frames or saves all frames from a crafted MIC file, the non-advancing traversal can hold a worker at full CPU indefinitely. This issue is fixed in version 13.0.0.
CVE-2026-112391 2 Python, Python-pillow 2 Pillow, Pillow 2026-10-23 7.5 High
Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0.
CVE-2016-20104 1 Eyelock 1 Nano Nxt 2026-10-23 7.5 High
EyeLock nano NXT 3.05.1193, 3.04.1108, 3.03.944, and 3.01.646 contain a path traversal vulnerability that allows unauthenticated attackers to read arbitrary files via the 'path' parameter. Attackers can send GET requests to /scripts/logdownload.php with traversal sequences like ../../etc/passwd, which readfile() returns unvalidated, disclosing local system files. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-19.
CVE-2014-125133 2026-10-23 7.5 High
NativeChurch theme for WordPress before 1.6.2 contains a path traversal vulnerability that allows unauthenticated attackers to download arbitrary files through the file parameter of download.php. Attackers can send GET requests with directory traversal sequences in the file parameter to retrieve sensitive files like wp-config.php. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-19.
CVE-2026-109433 1 Camunda 1 Camunda 7 2026-10-23 6.5 Medium
Camunda 7.24.0 before 7.24.16 and 7.23.0 before 7.23.17 contains an authorization bypass vulnerability in the Cockpit webapp that allows authenticated attackers to bypass permission checks due to an inverted comparison logic in AbstractCockpitPluginResource.isPermissionDisabled(). Attackers with minimal Cockpit access can exploit a non-empty disabledPermissions configuration to read all process instances, process definitions, and incidents engine-wide without triggering any logging, regardless of their actual data grants.
CVE-2012-20003 2026-10-23 6.1 Medium
Custom Tables plugin for WordPress before 3.4.6 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject scripts through the unsanitized 'key' parameter in iframe.php. Attackers can craft GET requests to /wp-content/plugins/custom-tables/iframe.php with s=1 and a malicious key value to execute script in victims' browsers and steal cookies. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-20.
CVE-2026-112857 2026-10-23 9.8 Critical
Deserialization of Untrusted Data vulnerability in axiomthemes Reprizo reprizo allows Object Injection.This issue affects Reprizo: from n/a through 1.0.8.
CVE-2026-112853 2026-10-23 9.8 Critical
Deserialization of Untrusted Data vulnerability in axiomthemes Hallelujah hallelujah allows Object Injection.This issue affects Hallelujah: from n/a through 1.1.1.
CVE-2026-115723 1 Snap7 Project 1 Snap7 2026-10-23 7.4 High
Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes.
CVE-2026-98871 1 Linux 2 Linux, Linux Kernel 2026-10-23 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix possible deadlock in SEV init failure path __sev_platform_init_handle_init_ex_path() calls rmp_mark_pages_firmware() with locked=false while the parent function of init_ex_path already acquired the sev_cmd_mutex. In the case of an RMPUPDATE failure for any page after the first, the cleanup path would invoke reclaim pages which would result in a deadlock in sev_do_cmd. Pass locked=true to honor the lock status of the parent function.
CVE-2026-112849 2026-10-23 7.1 High
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in AivahThemes Hostme v2 hostmev2 allows DOM-Based XSS.This issue affects Hostme v2: from n/a through 7.0.
CVE-2026-53942 2026-10-23 9.9 Critical
Conda Organization Infrastructure is a centralized location for infrastructure codes. Prior to commit 9c0f238, a GitHub Actions Pwn Request vulnerability appears to remain present in conda/conda. The affected workflow is .github/workflows/update.yml. It is triggered by issue_comment events containing @conda-bot render or @conda-bot recreate. For the render path, the workflow obtains the pull request head repository and branch from the PR API, checks out that PR-controlled repository/ref using secrets.SYNC_TOKEN, and then runs conda/actions/template-files@7f6830b1428a9bd47f0b068892c77eae95207037. The external template-files action reads its default configuration and templates from the checked-out working directory. In the confirmed finding, that action uses an unsandboxed Jinja2 environment to render attacker-controlled template content. This creates a Pwn Request chain in which an untrusted PR/comment path can reach template rendering in a privileged token context. This issue has been patched via commit 9c0f238.
CVE-2026-98919 1 Linux 2 Linux, Linux Kernel 2026-10-23 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has several corner-case issues flagged during review: 1. If xe_gt_clock_init() failed to recognise the crystal clock, gt->info.timestamp_base is 0, which makes idledly_units_ps also 0. The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a divide-by-zero and panics the kernel. 2. The tick-to-ns conversions are done in u32: idledly * idledly_units_ps, (maxcnt - 1) * 1000 Both overflow u32 before DIV_ROUND_CLOSEST() sees them. 3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32. 4. The register only stores whole ticks, so the clamped ns value has to be converted to ticks and back. DIV_ROUND_CLOSEST() can round that conversion up past maxcnt: maxcnt = 640 ns, one tick = 666664 ps clamp: maxcnt - 1 = 639 ns ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick tick -> ns: 1 * 666664 / 1000 = 667 ns 667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640), so xe_gt_WARN_ON() fires again on every subsequent init. Return early if timestamp_base is 0 (the unknown-crystal path). Do the conversions in u64 via the *_ULL() helpers so they cannot wrap. Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is cleared. v2: Drop the redundant warn on the timestamp_base == 0 path; xe_gt_clock_init() already warns on an unrecognised crystal clock. Keep the early return to avoid the divide-by-zero. - Vinay v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...) instead of writing the raw tick count, which could clobber INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the inhibit-switch clear from the maxcnt clamp so a set inhibit bit no longer forces a needless delay overwrite when the delay itself is already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt). (cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176)
CVE-2026-10572 1 Ibm 3 Mq Advanced Container Images, Mq Operator, Supplied Mq Advanced Container Images 2026-10-23 8.8 High
IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to a heap buffer overflow when processing MQPUT operations with malformed message options.
CVE-2026-10574 1 Ibm 3 Mq Advanced Container Images, Mq Operator, Supplied Mq Advanced Container Images 2026-10-23 8.8 High
IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to a heap buffer overflow when processing MQPUT or MQPUT1 operations with malformed message handle properties.
CVE-2026-10743 1 Ibm 3 Mq Advanced Container Images, Mq Operator, Supplied Mq Advanced Container Images 2026-10-23 8.8 High
IBM MQ could allow an authenticated attacker to cause a denial of service or corrupt memory due to improper validation of buffer sizes in MQOPEN operations.
CVE-2026-11828 1 Ibm 3 Mq Advanced Container Images, Mq Operator, Supplied Mq Advanced Container Images 2026-10-23 5.9 Medium
IBM MQ could allow a remote attacker with queue manager control or man-in-the-middle access on unencrypted channels to cause a denial of service in client applications using asynchronous message consumption due to improper validation of queue name length values.
CVE-2026-86020 1 Part-db 1 Part-db 2026-10-23 4.6 Medium
Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB contains a spreadsheet formula injection vulnerability in the part import/export workflow. An authenticated user with permission to import parts can import a CSV file containing formula-prefixed values, such as =1+1, into user-controlled part fields. When the affected part is later exported as an XLSX spreadsheet, Part-DB writes the attacker-controlled value using PhpSpreadsheet's setCellValue() method without neutralising spreadsheet formula characters. As a result, the exported XLSX file contains an executable spreadsheet formula cell rather than a plain text value. If another user exports and opens the spreadsheet, the formula may be evaluated by their spreadsheet software. This issue has been patched in version 2.13.2.
CVE-2026-76307 1 Splunk 1 Splunk 2026-10-23 7.2 High
In Splunk SOAR versions below 8.7.0, a user that holds a role with the Users and Roles view permission could use the Representational State Transfer (REST) API to infer authentication token values for other users. If the inferred token grants administrative access, that user could gain administrative access to the Splunk SOAR instance. The vulnerability is possible because the REST API accepts caller-controlled query filters on sensitive user record fields. For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Query for Data (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/query-for-data), and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.4.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation.
CVE-2026-76303 1 Splunk 1 Splunk 2026-10-23 5.7 Medium
In Splunk SOAR versions below 8.7.0, a user that holds a role with the install_apps capability could store attacker-controlled content that Splunk SOAR displays in app documentation by installing an app. If another user who holds a role with permission to view apps opens the app documentation, Splunk SOAR could run that content in the browser of the user who opened the app documentation. With this access, the first user could access data and make changes that the user who opened the app documentation could make. The vulnerability is possible because Splunk SOAR does not sanitize app documentation content before it displays that content. The vulnerability requires the attacker to phish the affected user by tricking them into initiating a request within their browser. The user that holds a role with the install_apps capability should not be able to exploit the vulnerability at will. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/7.1.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) and Add and configure apps and assets to provide actions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.6.0/manage-your-splunk-soar-on-premises-apps-and-assets/add-and-configure-apps-and-assets-to-provide-actions-in-splunk-soar-on-premises) in the Splunk documentation.