Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417953 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98491 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up committing both but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where committing both clones without modifications into the same zone is needed. So, let's just reset the entry in case for some reason we got an skb with a shared one during commit. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing. | ||||
| CVE-2026-98487 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mdb: restart port group walk after deletion br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through br_multicast_sg_del_exclude_ports() and unlink other port groups. If the cursor points into one of those groups, the next iteration dereferences a stale cursor and can leave mp->ports pointing at freed memory. A following RTM_GETMDB exposes the dangling pointer: BUG: KASAN: slab-use-after-free in br_mdb_dump Read of size 8 br_mdb_dump rtnl_mdb_dump rtnl_dumpit netlink_dump Reset the cursor to mp->ports after every deletion. The deletion removes at least the selected group, so the restarted walk always makes progress. | ||||
| CVE-2026-98485 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read rt_mt6_check() permits rules to be configured with rtinfo->addrnr == 0 even when address matching (IP6T_RT_FST_MASK) is requested. In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing addresses against rtinfo->addrs[i] and terminates backwards at the bottom of the loop: if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) { i++; } if (i == rtinfo->addrnr) break; When addrnr is 0, if the first packet address matches rtinfo->addrs[0], i is incremented to 1. Because i is now strictly greater than addrnr (0), the loop termination condition (i == rtinfo->addrnr) is bypassed and will never be satisfied. If a crafted IPv6 packet contains matching routing addresses, i will advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal() reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings or kernel panics. Fix this by: 1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but rtinfo->addrnr is zero. 2. In rt_mt6(), moving the termination condition (i < rtinfo->addrnr) into the for-loop header condition and removing the backwards break at the end of the loop body. | ||||
| CVE-2026-98471 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. | ||||
| CVE-2026-98469 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix AArch32 DBGBXVR<n> handling The consolidation of the breakpoint and watchpoint register accessors switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter selects backing storage with demux_wb_reg(), which only handles Op2 values 4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits KVM_BUG_ON() and marks the VM dead. DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4, restoring the pre-regression behavior. | ||||
| CVE-2026-98465 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Serialize IMSIC attributes with vCPU migration KVM device ioctls are not serialized against KVM_RUN. As a result, kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of an IMSIC VS-file before a concurrent vCPU migration releases it. The HGEI can then be allocated to another vCPU before imsic_vsfile_rw() uses the stale tuple. A GET or SET attribute may consequently access the new owner's interrupt file. Serialize the entire IMSIC attribute operation with the target vCPU mutex. This prevents the VS-file from being migrated and recycled until the attribute access completes. Acquire the mutex killably so that the device ioctl remains interruptible while waiting for KVM_RUN to finish. | ||||
| CVE-2026-98464 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Synchronize hrtimer callback during teardown The non-Sstc hrtimer callback clears next_set before its final uses of the enclosing vCPU. If teardown observes next_set as false while the callback is still running, kvm_riscv_vcpu_timer_cancel() skips hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the callback enters kvm_riscv_vcpu_set_interrupt(). A guest can arm the timer with SBI TIME and request shutdown with SBI legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and destroys the VM supplies the teardown side of the race; no post-launch host ioctl is needed to arm or request teardown. On upstream master 62cc90241548, generic KASAN reported: BUG: KASAN: slab-use-after-free in do_raw_spin_lock Write of size 4 at addr ff60000005e58898 kvm_riscv_vcpu_set_interrupt kvm_riscv_vcpu_hrtimer_expired __hrtimer_run_queues hrtimer_interrupt The object was allocated by KVM_CREATE_VCPU and freed concurrently by: kvm_destroy_vcpus kvm_arch_destroy_vm kvm_destroy_vm __fput For deterministic validation, I added mdelay(1000) immediately after the existing next_set = false assignment. This only widens the existing post-clear callback window. A no-delay trace build naturally reached the callback-after-teardown-start/before-deinit ordering in 12 of 200 runs, but 1,500 stock-kernel stress iterations did not produce a KASAN report, so natural reproduction is timing-sensitive. Always invoke hrtimer_cancel() for an initialized timer. Preserve the existing -EINVAL result when the timer is no longer set, but only after synchronizing with a running callback. With this patch, hrtimer_cancel() blocked for the full widened callback window before vCPU destruction. KASAN reported no error in 100 fixed-and-widened runs or 200 fix-only timing-sweep runs. | ||||
| CVE-2026-98442 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. | ||||
| CVE-2026-98441 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up processing both again but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels or run NAT and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where we need to process both clones without modifications in the same zone. So, let's just reset the entry in case for some reason we got an skb with a shared one. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. Unlike openvswitch module, act_ct allows for NAT without commit. Changing that would be a uAPI break. So, act_ct needs to reset on NAT regardless of the commit flag to avoid reallocation of the extension space. This, however, doesn't really change the picture for sensible networking cases as there should be no need to run the same packet twice (before and after the clone) through conntrack without packet header or zone changes and without commit. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing. | ||||
| CVE-2026-98440 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which is a Bad Idea(tm). Freeing the page tables is fair game (this is what this callback is for), but freeing the container that could still be referenced by another part of the system is not great. Instead, grow separate destructors that gets called when we tear the VM down for good. From there, we can nuke both the individual MMUs as well as the global array that points to them, safe in the knowledge that the vcpus themselves have been destroyed already. | ||||
| CVE-2026-98865 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't run ops.dequeue() with a DSQ lock held ops.dequeue() is invoked with the source user DSQ's lock still held on the consume and move paths (scx_consume_dispatch_q(), move_task_between_dsqs()). A BPF scheduler which locks the source user DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq - self-deadlocks. ops.dequeue() can only call the "any" kfuncs and none of them can lock a builtin DSQ, so the global and bypass paths can't deadlock; however, all DSQ locks share one lockdep class, so iterating any user DSQ from ops.dequeue() on those paths trips the recursion check. Move the invocation after the DSQ unlock on all three paths. SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer so that the callback is invoked exactly once. | ||||
| CVE-2026-98866 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/cache: Introduce task_struct->sched_cache_grp to fix UAF Add a sched_cache_grp pointer to task_struct so that scheduler code can access the cache group directly via the task, without going through mm->sched_cache_grp. This decouples the scheduler's hot-path accesses from the mm_struct. Each task holds its own refcount on the sched_cache_group, separate from the reference held by its mm_struct. The reference is acquired in copy_mm() (fork) and exec_mmap() (exec), and released in exit_mm(). This fixes the use-after-free when account_mm_sched() reaches the group through a task whose mm is being switched, as reported by Hyunwoo: https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/ Convert all scheduler code in fair.c and exit.c to use p->sched_cache_grp instead of p->mm->sched_cache_grp. Keep the fork/exec/exit reference management out of the generic mm paths: add sched_cache_fork(), sched_cache_fork_cleanup(), sched_cache_exec_mmap() and sched_cache_exit_mm() in kernel/sched/cache_sched.c (with empty stubs for !CONFIG_SCHED_CACHE), so fs/exec.c, kernel/fork.c and kernel/exit.c each call one helper instead of open-coding the refcounting under #ifdef. Also add sched_cache_group_get() and task_cache_group_get(). | ||||
| CVE-2026-116012 | 2 Nationalsecurityagency, Nsa | 2 Ghidra, Ghidra | 2026-10-24 | 3.6 Low |
| Ghidra before 12.2 contains a numeric truncation vulnerability in PackedDecode::skipAttribute and skipAttributeRemaining in marshal.cc that stores 64-bit string lengths in 32-bit variables. Attackers can supply a crafted packed stream, such as a malicious .sla file, to inject attributes into the decompiler's input or crash the decompiler process. | ||||
| CVE-2026-115932 | 1 Gitroomhq | 1 Postiz-app | 2026-10-24 | 9.6 Critical |
| When a post is published, Postiz treats a media path that is not a web address as a file on the server's disk, but it does not check that the file lies inside the upload directory. A registered user can store a crafted media path with a post, get it past the checks that normally restrict it, and have the publishing worker read an arbitrary file and send it as an attachment to a Discord server the user controls. The same unconfined reads can be reached through two further routes. One tells the caller whether a file exists and can exhaust the backend's memory, the other delivers the file the same way as the main route. Self-registration is open by default, so the attacker needs no existing account. | ||||
| CVE-2026-116008 | 2 Bottelet, Daybydaycrm | 2 Daybydaycrm, Daybyday Crm | 2026-10-24 | 4.3 Medium |
| DaybydayCRM through 2.2.1 contains a missing authorization vulnerability in ProjectsController::updateAssign() that allows any authenticated user to reassign projects without the can-assign-new-user-to-project permission. Low-privileged employees can send PATCH or POST requests to /projects/updateassign/{external_id} with a chosen user_assigned_id to redirect project ownership and notifications. | ||||
| CVE-2026-116016 | 1 Yunaiv | 1 Yudao-cloud | 2026-10-24 | 7.1 High |
| yudao-cloud through 2026.09 contains an authorization bypass vulnerability that allows authenticated users to evade row-level data scope restrictions by sending a data-permission-enable header set to false. Attackers can add this header to /admin-api requests, which DataPermissionRpcWebFilter trusts, to read or modify other departments' and users' records within the same tenant. | ||||
| CVE-2026-108436 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-10-24 | 6.5 Medium |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-116020 | 1 Bookstackapp | 1 Bookstack | 2026-10-24 | 5.4 Medium |
| BookStack before 26.09.2 contains an incorrect authorization vulnerability in AttachmentController that allows authenticated users to access other users' draft page attachments by ID. Attackers with attachment permissions can enumerate sequential attachment IDs to download, rename, relink, or replace files on another user's unpublished draft pages. | ||||
| CVE-2026-116014 | 1 Open62541 | 1 Open62541 | 2026-10-24 | 8.1 High |
| open62541 1.5.0 before 1.5.7 contains an integer overflow in UA_DataType_fromStructureDescription() that wraps the 16-bit memSize field for large custom structure definitions. A malicious OPC UA server can supply DataType definitions via UA_Client_getRemoteDataTypes(), causing decodeBinaryStructure() to overflow the heap, crashing clients or enabling code execution. | ||||
| CVE-2026-115998 | 1 Cervantessec | 1 Cervantes | 2026-10-24 | 4.3 Medium |
| IDOR in Cervantes version v1.3-beta could allow an authenticated attacker ca access sensitive findings, proof-of-concept details, credentials, and client information from projects they do not belong to. Additionally, they can modify finding statuses and transfer findings to their own projects, compromising data confidentiality and integrity. | ||||