Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (417953 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-20011 1 Cisco 4 Cisco Open Source Snort3, Cisco Secure Firewall Threat Defense (ftd) Software, Cisco Utd Snort Ips Engine Software and 1 more 2026-10-24 5.8 Medium
Multiple Cisco products are affected by a vulnerability in the Snort 3 SMTP MIME Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart. This vulnerability is due to a lack of error checking when the MIME fields of the SMTP header are parsed. An attacker could exploit this vulnerability by sending crafted SMTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine unexpectedly restarts.
CVE-2026-99020 1 Linux 2 Linux, Linux Kernel 2026-10-24 N/A
In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table.
CVE-2026-115929 1 Mongodb 1 Compass 2026-10-24 6.8 Medium
MongoDB Compass relies on Electron, a third-party runtime that carries its own TLS root certificate store. This root certificate store has the recoverable eMudhra intermediate CA certificates. Issue is resolved by updating to Compass 1.53.1, which includes Electron 44.9.1.
CVE-2023-7356 1 Linux 2 Linux, Linux Kernel 2026-10-24 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.
CVE-2026-99085 1 Linux 2 Linux, Linux Kernel 2026-10-24 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU.
CVE-2026-99087 1 Linux 2 Linux, Linux Kernel 2026-10-24 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix NULL pointer dereference when the 'R' flag is used If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the user activates the device in the 'R' mode, a crash in dm_integrity_resume happens because the function attempts to read the journal containing the bitmap. This patch makes dm-integrity skip any writes to the device in dm_integrity_resume if the device is activated in the 'R' mode.
CVE-2026-79885 1 Hpe 1 Aos 2026-10-24 8.2 High
An unauthenticated file write vulnerability exists in the PAPI protocol in AOS-8. Successful exploitation could allow an unauthenticated remote attacker to make limited modifications to files on the affected system and to disrupt the availability of the affected service.
CVE-2026-79886 1 Hpe 1 Aos 2026-10-24 8.2 High
An unauthenticated buffer overflow vulnerability exists in the PAPI protocol of AOS-8. Successful exploitation could allow an unauthenticated remote attacker to disrupt the availability of the affected service on the controller, with a limited impact to its integrity.
CVE-2026-99069 1 Linux 2 Linux, Linux Kernel 2026-10-24 N/A
In the Linux kernel, the following vulnerability has been resolved: Input: ati_remote2 - fix type confusion in device attribute handlers Previously, the channel_mask and mode_mask attributes were registered on the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b ("Input: ati-remote2 - use driver core to instantiate device attributes") converted the driver to let the driver core manage them via dev_groups in struct usb_driver, the attributes moved to the bound usb_interface devices, but the show and store callbacks were not updated accordingly. As a result, the callbacks still invoked to_usb_device() on a device pointer belonging to a struct usb_interface, producing an invalid usb_device pointer. Use to_usb_interface() directly in the attribute handlers to obtain the interface and its driver data.
CVE-2026-99076 1 Linux 2 Linux, Linux Kernel 2026-10-24 N/A
In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big and Redirect Message packets are locally delivered and quote a UDP packet, an exception is only created in the IPv6 exception cache if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the exception cache in order to discover the ephemeral port used by a connected UDP socket. Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and commit a00df2caffed ("ipv6: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the exception cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating an exception, even before trying to find a matching socket. Do that by calling ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in an exception being created or updated in the cache that the attacker can observe. Pass the ifindex of the ingress device and the default uid, in a similar fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any nexthop in ip6_redirect_nh_match() and no exception would be created in response to a Redirect Message. Note that this does not allow attackers to create exceptions that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMPv6 error that quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ip6_sk_update_pmtu() / ip6_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the exception cache of the nexthop resolved by the no socket helpers and another in the exception cache of the nexthop used by the socket.
CVE-2026-79881 1 Hpe 1 Aos 2026-10-23 8.5 High
An authentication bypass vulnerability in the underlying operating system of AOS-8 could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system leading to complete system compromise.
CVE-2026-93640 1 Zimbra 1 Zimbra Collaboration Suite 2026-10-23 7.8 High
A local privilege escalation vulnerability in the optional dnscache package of Zimbra Collaboration Suite (ZCS) allows the Unix zimbra account to access files with root privileges. The passwordless sudo policy permits arbitrary arguments to zmunbound, whose wrapper forwards them to Unbound without restricting the configuration path. An attacker can supply a configuration that retains root privileges and disables the chroot. Include directives expose root-readable file contents through parser errors, while an attacker-selected logfile path creates a root-owned file or appends Unbound log records to an existing file. This can disclose password hashes and private keys and corrupt privileged configuration files, preventing affected services from starting with the modified configuration. The affected configuration is present in ZCS 10.1.16 and 10.1.21 dnscache packages.
CVE-2026-46346 1 Intranda 1 Goobi Viewer Core 2026-10-23 6.5 Medium
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the password reset token is predictably based on the time of the reset request. An attacker who knows the target's email address can request a reset and then brute-force the token. Exploiting this finding alone forces an unauthorized password reset on any account. This issue has been patched in version 26.05.
CVE-2026-55459 1 Intranda 1 Goobi Viewer Core 2026-10-23 7.4 High
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.01 to before version 26.05, AuthenticationEndpoint.verifyOpenIdToken builds its verifier as JWT.require(algorithm).withIssuer(issuer).build() and does not enforce the aud claim during cryptographic validation. The aud check is performed manually afterwards via a single string-equality call, which only handles single-string aud values. In a multi-RP IdP setup, a token whose single-string aud matches the viewer's client ID but was issued for a different relying party passes the check and authenticates the attacker as the token's sub. This issue has been patched in version 26.05.
CVE-2026-115845 1 Aws 2 Aws-mcp-server, Aws Mcp Server 2026-10-23 6.4 Medium
An incomplete list of disallowed inputs in the Python code validator of the run_script tool in AWS MCP Server might allow an authenticated remote user to execute arbitrary code within their own isolated session environment via a crafted script. AWS fixed this issue service-side. No customer action is required.
CVE-2026-19741 1 Zephyrproject 1 Zephyr 2026-10-23 7.5 High
Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset. The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination. The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit.
CVE-2026-113951 1 Apple 1 Container 2026-10-23 N/A
If an attacker can write to the filesystem of a container k8s cluster container, they can plant an exec credential plugin in /etc/kubernetes/admin.conf. kubectl will run that plugin as the macOS host user the next time someone pulls the cluster's kubeconfig onto the host with container k8s write-config or create and then runs kubectl against it — turning filesystem access inside an untrusted Linux container into arbitrary command execution on the host. This vulnerability is addressed in Container version 1.5.0.
CVE-2026-115754 1 Yahoo 2 Serialize-javascript, Serialize Javascript 2026-10-23 4.7 Medium
serialize-javascript from 7.0.1 before 7.1.3 contains a cross-site scripting vulnerability that allows attackers to break out of HTML script elements by ending serialized function source text with an unescaped </script. Attackers controlling a function's source via a spoofed toString() can combine surrounding output delimiters and later values to inject live markup such as img onerror handlers.
CVE-2026-53920 1 Openwrt 1 Odhcpd 2026-10-23 N/A
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. From version 17.01.0 to before version 25.12.3, odhcpd's DHCPv6 IA parser accepts an IA_NA or IA_PD option whose body is shorter than struct dhcpv6_ia_hdr, casts the option header to that full structure, and reads ia->iaid before proving that the IA body contains the IAID field. If an unauthenticated network-adjacent client places a zero-length or otherwise short IA option at the end of odhcpd's 8192-byte receive stack buffer, the IAID read crosses from data_buf into adjacent stack memory. The disclosed bytes are then reflected in the DHCPv6 reply IAID; prior ARM validation showed data_buf[8192:8196] disclosing the saved stack canary, and wider stack scans can leak ASLR-useful stack/process contents. This issue has been patched in version 25.12.3.
CVE-2026-114263 1 Projectworlds 1 Advanced Library Management System 2026-10-23 7.3 High
A vulnerability was identified in ProjectWorlds Advanced Library Management System 1.0. The affected element is the function mysqli_query of the file individual_report_search.php. Such manipulation of the argument roll_number leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used.