| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
A production AMD EPYC system crashed with a NULL pointer dereference
in the PMU NMI handler:
BUG: kernel NULL pointer dereference, address: 0000000000000198
RIP: x86_perf_event_update+0xc/0xa0
Call Trace:
<NMI>
amd_pmu_v2_handle_irq+0x1a6/0x390
perf_event_nmi_handler+0x24/0x40
The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0,
corresponding to the `if (unlikely(!hwc->event_base))` check in
x86_perf_event_update() where hwc = &event->hw and event is NULL.
drgn inspection of the vmcore on CPU 106 showed a mismatch between
cpuc->active_mask and cpuc->events[]:
active_mask: 0x1e (bits 1, 2, 3, 4)
events[1]: 0xff1100136cbd4f38 (valid)
events[2]: 0x0 (NULL, but active_mask bit 2 set)
events[3]: 0xff1100076fd2cf38 (valid)
events[4]: 0xff1100079e990a90 (valid)
The event that should occupy events[2] was found in event_list[2]
with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run
(which clears hw.state and sets active_mask) but events[2] was
never populated.
Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH),
showing it was stopped when the PMU rescheduled events, confirming the
throttle-then-reschedule sequence occurred.
The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access
and potential PEBS record loss") which moved the cpuc->events[idx]
assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(),
after the PERF_HES_ARCH check. This broke any path that calls
pmu->start() without going through x86_pmu_enable() -- specifically
the unthrottle path:
perf_adjust_freq_unthr_events()
-> perf_event_unthrottle_group()
-> perf_event_unthrottle()
-> event->pmu->start(event, 0)
-> x86_pmu_start() // sets active_mask but not events[]
The race sequence is:
1. A group of perf events overflows, triggering group throttle via
perf_event_throttle_group(). All events are stopped: active_mask
bits cleared, events[] preserved (x86_pmu_stop no longer clears
events[] after commit 7e772a93eb61).
2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs
due to other scheduling activity. Stopped events that need to
move counters get PERF_HES_ARCH set and events[old_idx] cleared.
In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events
to be skipped -- events[new_idx] is never set.
3. The timer tick unthrottles the group via pmu->start(). Since
commit 7e772a93eb61 removed the events[] assignment from
x86_pmu_start(), active_mask[new_idx] is set but events[new_idx]
remains NULL.
4. A PMC overflow NMI fires. The handler iterates active counters,
finds active_mask[2] set, reads events[2] which is NULL, and
crashes dereferencing it.
Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to
before the PERF_HES_ARCH check, so that events[] is populated even
for events that are not immediately started. This ensures the
unthrottle path via pmu->start() always finds a valid event pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: protect from late creation of hierarchy
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
The netdev may get unregistered in between the time we take
the ref and the time we lock it. We may allocate the hierarchy
after flush has already run, which would lead to a leak.
Take the instance lock in pre- already, this saves us from the race
and removes the need for dedicated lock/unlock callbacks completely.
After all, if there's any chance of write happening concurrently
with the flush - we're back to leaking the hierarchy.
We may take the lock for devices which don't support shapers but
we're only dealing with SET operations here, not taking the lock
would be optimizing for an error case. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent concurrent access to IPSec ASO context
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained. |
| SecureDrop Client is a desktop app for journalists to securely communicate with sources and handle submissions on the SecureDrop Workstation. In versions 0.17.4 and below, a compromised SecureDrop Server can achieve code execution on the Client's virtual machine (sd-app) by exploiting improper filename validation in gzip archive extraction, which permits absolute paths and enables overwriting critical files like the SQLite database. Exploitation requires prior compromise of the dedicated SecureDrop Server, which itself is hardened and only accessible via Tor hidden services. Despite the high attack complexity, the vulnerability is rated High severity due to its significant impact on confidentiality, integrity, and availability of decrypted source submissions. This issue is similar to CVE-2025-24888 but occurs through a different code path, and a more robust fix has been implemented in the replacement SecureDrop Inbox codebase. The issue has been fixed in version 0.17.5. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Stylemix MasterStudy LMS masterstudy-lms-learning-management-system allows Leveraging Race Conditions.This issue affects MasterStudy LMS: from n/a through <= 3.6.20. |
| Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Saad Iqbal myCred mycred allows Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions.This issue affects myCred: from n/a through <= 2.9.4.3. |
| OpenProject is open-source, web-based project management software. Prior to version 17.3.0, a user with `manage_agendas` permission in any project can inject agenda items into meetings belonging to any other project on the instance — even projects they have no access to. No knowledge of the target project, meeting, or victim is required; the attacker can blindly spray items into every meeting on the instance by iterating sequential section IDs. Version 17.3.0 patches the issue. |
| The atec Debug plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation on the 'debug_path' parameter in all versions up to, and including, 1.2.22. This makes it possible for authenticated attackers, with Administrator-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| Improper synchronization of the userTokens map in the API server in Canonical Juju 4.0.5, 3.6.20, and 2.9.56 may allow an authenticated user to possibly cause a denial of service on the server or possibly reuse a single-use discharge token. |
| A race condition was addressed with improved state handling. This issue is fixed in Safari 26.2, iOS 18.7.3 and iPadOS 18.7.3, iOS 26.2 and iPadOS 26.2, macOS Tahoe 26.2, tvOS 26.2, visionOS 26.2, watchOS 26.2. Processing maliciously crafted web content may lead to an unexpected process crash. |
| Oxia is a metadata store and coordination system. Prior to 0.16.2, a race condition between session heartbeat processing and session closure can cause the server to panic with send on closed channel. The heartbeat() method uses a blocking channel send while holding a mutex, and under specific timing with concurrent close() calls, this can lead to either a deadlock (channel buffer full) or a panic (send on closed channel after TOCTOU gap in KeepAlive). This vulnerability is fixed in 0.16.2. |
| Mattermost versions 10.11.x <= 10.11.12, 11.5.x <= 11.5.0, 11.4.x <= 11.4.2, 11.3.x <= 11.3.2 fail to enforce atomic single-use consumption of guest magic link tokens, which allows an attacker with access to a valid magic link to establish multiple independent authenticated sessions via concurrent requests.. Mattermost Advisory ID: MMSA-2026-00624 |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Device Association Service allows an authorized attacker to elevate privileges locally. |
| TOCTOU in linenoiseHistorySave in linenoise allows local attackers to overwrite arbitrary files and change permissions via a symlink race between fopen("w") on the history path and subsequent chmod() on the same path. |
| util-linux is a random collection of Linux utilities. Prior to version 2.41.4, a TOCTOU (Time-of-Check-Time-of-Use) vulnerability has been identified in the SUID binary /usr/bin/mount from util-linux. The mount binary, when setting up loop devices, validates the source file path with user privileges via fork() + setuid() + realpath(), but subsequently re-canonicalizes and opens it with root privileges (euid=0) without verifying that the path has not been replaced between both operations. Neither O_NOFOLLOW, nor inode comparison, nor post-open fstat() are employed. This allows a local unprivileged user to replace the source file with a symlink pointing to any root-owned file or device during the race window, causing the SUID binary to open and mount it as root. Exploitation requires an /etc/fstab entry with user,loop options whose path points to a directory where the attacker has write permission, and that /usr/bin/mount has the SUID bit set (the default configuration on virtually all Linux distributions). The impact is unauthorized read access to root-protected files and block devices, including backup images, disk volumes, and any file containing a valid filesystem. This issue has been patched in version 2.41.4. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8, apps that register an asynchronous session.setPermissionRequestHandler() may be vulnerable to a use-after-free when handling fullscreen, pointer-lock, or keyboard-lock permission requests. If the requesting frame navigates or the window closes while the permission handler is pending, invoking the stored callback dereferences freed memory, which may lead to a crash or memory corruption. Apps that do not set a permission request handler, or whose handler responds synchronously, are not affected. This issue has been patched in versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix race condition for gdev->srcu
If two drivers were calling gpiochip_add_data_with_key(), one may be
traversing the srcu-protected list in gpio_name_to_desc(), meanwhile
other has just added its gdev in gpiodev_add_to_list_unlocked().
This creates a non-mutexed and non-protected timeframe, when one
instance is dereferencing and using &gdev->srcu, before the other
has initialized it, resulting in crash:
[ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000
[ 4.943396] Mem abort info:
[ 4.943400] ESR = 0x0000000096000005
[ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.943407] SET = 0, FnV = 0
[ 4.943410] EA = 0, S1PTW = 0
[ 4.943413] FSC = 0x05: level 1 translation fault
[ 4.943416] Data abort info:
[ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000
[ 4.961449] [ffff800272bcc000] pgd=0000000000000000
[ 4.969203] , p4d=1000000039739003
[ 4.979730] , pud=0000000000000000
[ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset"
[ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
...
[ 5.121359] pc : __srcu_read_lock+0x44/0x98
[ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0
[ 5.153671] sp : ffff8000833bb430
[ 5.298440]
[ 5.298443] Call trace:
[ 5.298445] __srcu_read_lock+0x44/0x98
[ 5.309484] gpio_name_to_desc+0x60/0x1a0
[ 5.320692] gpiochip_add_data_with_key+0x488/0xf00
5.946419] ---[ end trace 0000000000000000 ]---
Move initialization code for gdev fields before it is added to
gpio_devices, with adjacent initialization code.
Adjust goto statements to reflect modified order of operations
[Bartosz: fixed a build issue, removed stray newline] |
| EspoCRM is an open source customer relationship management application. In versions 9.3.3 and below, the POST /api/v1/Attachment/fromImageUrl endpoint is vulnerable to Server-Side Request Forgery (SSRF) via a DNS rebinding (TOCTOU) condition. Host validation uses dns_get_record() but the actual HTTP request resolves hostnames through curl's internal resolver (gethostbyname()), allowing the two lookups to return different IP addresses for the same hostname. A secondary issue exists where an empty DNS result (due to DNS failure, IPv6-only domains, or non-existent hostnames) causes the validation to implicitly allow the host without further checks. An authenticated attacker with default attachment creation access can exploit this gap to bypass internal IP restrictions and scan internal network ports, confirm the existence of internal hosts, and interact with internal HTTP-based services, though data extraction from binary protocol services and remote code execution are not possible through this endpoint. This issue has been fixed in version 9.3.4. |
| Gradio is an open-source Python package designed for quick prototyping. Prior to version 6.7, Gradio apps running on Window with Python 3.13+ are vulnerable to an absolute path traversal issue that enables unauthenticated attackers to read arbitrary files from the file system. Python 3.13+ changed the definition of `os.path.isabs` so that root-relative paths like `/windows/win.ini` on Windows are no longer considered absolute paths, resulting in a vulnerability in Gradio's logic for joining paths safely. This can be exploited by unauthenticated attackers to read arbitrary files from the Gradio server, even when Gradio is set up with authentication. Version 6.7 fixes the issue. |
| OpenClaw before 2026.3.31 contains a time-of-check-time-of-use race condition in the remote filesystem bridge readFile function that allows sandbox escape. Attackers can exploit the separate path validation and file read operations to bypass sandbox restrictions and read arbitrary files. |
