| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: sii902x: Fix probing race issue
A null pointer dereference crash has been observed rarely on TI
platforms using sii9022 bridge:
[ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x]
[ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x]
[ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm]
[ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper]
[ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper]
[ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm]
[ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper]
[ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper]
[ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper]
[ 53.326401] drm_client_register+0x5c/0xa0 [drm]
[ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper]
[ 53.336881] tidss_probe+0x128/0x264 [tidss]
[ 53.341174] platform_probe+0x68/0xc4
[ 53.344841] really_probe+0x188/0x3c4
[ 53.348501] __driver_probe_device+0x7c/0x16c
[ 53.352854] driver_probe_device+0x3c/0x10c
[ 53.357033] __device_attach_driver+0xbc/0x158
[ 53.361472] bus_for_each_drv+0x88/0xe8
[ 53.365303] __device_attach+0xa0/0x1b4
[ 53.369135] device_initial_probe+0x14/0x20
[ 53.373314] bus_probe_device+0xb0/0xb4
[ 53.377145] deferred_probe_work_func+0xcc/0x124
[ 53.381757] process_one_work+0x1f0/0x518
[ 53.385770] worker_thread+0x1e8/0x3dc
[ 53.389519] kthread+0x11c/0x120
[ 53.392750] ret_from_fork+0x10/0x20
The issue here is as follows:
- tidss probes, but is deferred as sii902x is still missing.
- sii902x starts probing and enters sii902x_init().
- sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from
DRM's perspective.
- sii902x calls sii902x_audio_codec_init() and
platform_device_register_data()
- The registration of the audio platform device causes probing of the
deferred devices.
- tidss probes, which eventually causes sii902x_bridge_get_edid() to be
called.
- sii902x_bridge_get_edid() tries to use the i2c to read the edid.
However, the sii902x driver has not set up the i2c part yet, leading
to the crash.
Fix this by moving the drm_bridge_add() to the end of the
sii902x_init(), which is also at the very end of sii902x_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
binder: signal epoll threads of self-work
In (e)poll mode, threads often depend on I/O events to determine when
data is ready for consumption. Within binder, a thread may initiate a
command via BINDER_WRITE_READ without a read buffer and then make use
of epoll_wait() or similar to consume any responses afterwards.
It is then crucial that epoll threads are signaled via wakeup when they
queue their own work. Otherwise, they risk waiting indefinitely for an
event leaving their work unhandled. What is worse, subsequent commands
won't trigger a wakeup either as the thread has pending work. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "kobject: Remove redundant checks for whether ktype is NULL"
This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31.
It is reported to cause problems, so revert it for now until the root
cause can be found. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Stop relying on userspace for info to fault in xsave buffer
Before this change, the expected size of the user space buffer was
taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed
from user-space, so it is possible construct a sigreturn frame where:
* fx_sw->xstate_size is smaller than the size required by valid bits in
fx_sw->xfeatures.
* user-space unmaps parts of the sigrame fpu buffer so that not all of
the buffer required by xrstor is accessible.
In this case, xrstor tries to restore and accesses the unmapped area
which results in a fault. But fault_in_readable succeeds because buf +
fx_sw->xstate_size is within the still mapped area, so it goes back and
tries xrstor again. It will spin in this loop forever.
Instead, fault in the maximum size which can be touched by XRSTOR (taken
from fpstate->user_size).
[ dhansen: tweak subject / changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
sched/membarrier: reduce the ability to hammer on sys_membarrier
On some systems, sys_membarrier can be very expensive, causing overall
slowdowns for everything. So put a lock on the path in order to
serialize the accesses to prevent the ability for this to be called at
too high of a frequency and saturate the machine. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: regenerate buddy after block freeing failed if under fc replay
This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
If the external phy working together with phy-omap-usb2 does not implement
send_srp(), we may still attempt to call it. This can happen on an idle
Ethernet gadget triggering a wakeup for example:
configfs-gadget.g1 gadget.0: ECM Suspend
configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup
...
Unable to handle kernel NULL pointer dereference at virtual address
00000000 when execute
...
PC is at 0x0
LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc]
...
musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core]
usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether]
eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c
dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4
sch_direct_xmit from __dev_queue_xmit+0x334/0xd88
__dev_queue_xmit from arp_solicit+0xf0/0x268
arp_solicit from neigh_probe+0x54/0x7c
neigh_probe from __neigh_event_send+0x22c/0x47c
__neigh_event_send from neigh_resolve_output+0x14c/0x1c0
neigh_resolve_output from ip_finish_output2+0x1c8/0x628
ip_finish_output2 from ip_send_skb+0x40/0xd8
ip_send_skb from udp_send_skb+0x124/0x340
udp_send_skb from udp_sendmsg+0x780/0x984
udp_sendmsg from __sys_sendto+0xd8/0x158
__sys_sendto from ret_fast_syscall+0x0/0x58
Let's fix the issue by checking for send_srp() and set_vbus() before
calling them. For USB peripheral only cases these both could be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
pwm: Fix out-of-bounds access in of_pwm_single_xlate()
With args->args_count == 2 args->args[2] is not defined. Actually the
flags are contained in args->args[1]. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
There is a potential UAF scenario in the case of an LPI translation
cache hit racing with an operation that invalidates the cache, such
as a DISCARD ITS command. The root of the problem is that
vgic_its_check_cache() does not elevate the refcount on the vgic_irq
before dropping the lock that serializes refcount changes.
Have vgic_its_check_cache() raise the refcount on the returned vgic_irq
and add the corresponding decrement after queueing the interrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: fix global oob in rmnet_policy
The variable rmnet_link_ops assign a *bigger* maxtype which leads to a
global out-of-bounds read when parsing the netlink attributes. See bug
trace below:
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207
CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x172/0x475 mm/kasan/report.c:395
kasan_report+0xbb/0x1c0 mm/kasan/report.c:495
validate_nla lib/nlattr.c:386 [inline]
__nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
__nla_parse+0x3e/0x50 lib/nlattr.c:697
nla_parse_nested_deprecated include/net/netlink.h:1248 [inline]
__rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594
rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091
netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0x154/0x190 net/socket.c:734
____sys_sendmsg+0x6df/0x840 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fdcf2072359
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359
RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003
RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000
</TASK>
The buggy address belongs to the variable:
rmnet_policy+0x30/0xe0
The buggy address belongs to the physical page:
page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07
ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9
>ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9
^
ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9
ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9
According to the comment of `nla_parse_nested_deprecated`, the maxtype
should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events
After the blamed commit, we started doing this dereference for every
NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system.
static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev)
{
struct dsa_user_priv *p = netdev_priv(dev);
return p->dp;
}
Which is obviously bogus, because not all net_devices have a netdev_priv()
of type struct dsa_user_priv. But struct dsa_user_priv is fairly small,
and p->dp means dereferencing 8 bytes starting with offset 16. Most
drivers allocate that much private memory anyway, making our access not
fault, and we discard the bogus data quickly afterwards, so this wasn't
caught.
But the dummy interface is somewhat special in that it calls
alloc_netdev() with a priv size of 0. So every netdev_priv() dereference
is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event
with a VLAN as its new upper:
$ ip link add dummy1 type dummy
$ ip link add link dummy1 name dummy1.100 type vlan id 100
[ 43.309174] ==================================================================
[ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8
[ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374
[ 43.330058]
[ 43.342436] Call trace:
[ 43.366542] dsa_user_prechangeupper+0x30/0xe8
[ 43.371024] dsa_user_netdevice_event+0xb38/0xee8
[ 43.375768] notifier_call_chain+0xa4/0x210
[ 43.379985] raw_notifier_call_chain+0x24/0x38
[ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8
[ 43.389120] netdev_upper_dev_link+0x70/0xa8
[ 43.393424] register_vlan_dev+0x1bc/0x310
[ 43.397554] vlan_newlink+0x210/0x248
[ 43.401247] rtnl_newlink+0x9fc/0xe30
[ 43.404942] rtnetlink_rcv_msg+0x378/0x580
Avoid the kernel oops by dereferencing after the type check, as customary. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after
failing to attach the region to an ACL group, we hit a NULL pointer
dereference upon 'region->group->tcam' [1].
Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam().
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0
[...]
Call Trace:
mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate mech token in session setup
If client send invalid mech token in session setup request, ksmbd
validate and make the error if it is invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Fix block process call transactions
According to the Intel datasheets, software must reset the block
buffer index twice for block process call transactions: once before
writing the outgoing data to the buffer, and once again before
reading the incoming data from the buffer.
The driver is currently missing the second reset, causing the wrong
portion of the block buffer to be read. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix UAF issue in ksmbd_tcp_new_connection()
The race is between the handling of a new TCP connection and
its disconnection. It leads to UAF on `struct tcp_transport` in
ksmbd_tcp_new_connection() function. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix re-attachment branch in bpf_tracing_prog_attach
The following case can cause a crash due to missing attach_btf:
1) load rawtp program
2) load fentry program with rawtp as target_fd
3) create tracing link for fentry program with target_fd = 0
4) repeat 3
In the end we have:
- prog->aux->dst_trampoline == NULL
- tgt_prog == NULL (because we did not provide target_fd to link_create)
- prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X)
- the program was loaded for tgt_prog but we have no way to find out which one
BUG: kernel NULL pointer dereference, address: 0000000000000058
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x15b/0x430
? fixup_exception+0x22/0x330
? exc_page_fault+0x6f/0x170
? asm_exc_page_fault+0x22/0x30
? bpf_tracing_prog_attach+0x279/0x560
? btf_obj_id+0x5/0x10
bpf_tracing_prog_attach+0x439/0x560
__sys_bpf+0x1cf4/0x2de0
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x41/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Return -EINVAL in this situation. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix inconsistent per-file compression format
EROFS can select compression algorithms on a per-file basis, and each
per-file compression algorithm needs to be marked in the on-disk
superblock for initialization.
However, syzkaller can generate inconsistent crafted images that use
an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA
algorithmtype even it's not set in `sbi->available_compr_algs`. This
can lead to an unexpected "BUG: kernel NULL pointer dereference" if
the corresponding decompressor isn't built-in.
Fix this by checking against `sbi->available_compr_algs` for each
m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset
bitmap is now fixed together since it was harmless previously. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS
For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off
for validation. However, variable offset ptr alu is not prohibited
for this ptr kind. So the variable offset is not checked.
The following prog is accepted:
func#0 @0
0: R1=ctx() R10=fp0
0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx()
1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys()
2: (b7) r8 = 1024 ; R8_w=1024
3: (37) r8 /= 1 ; R8_w=scalar()
4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,
smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400))
5: (0f) r7 += r8
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024
mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1
mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024
6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off
=(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024,
var_off=(0x0; 0x400))
6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar()
7: (95) exit
This prog loads flow_keys to r7, and adds the variable offset r8
to r7, and finally causes out-of-bounds access:
BUG: unable to handle page fault for address: ffffc90014c80038
[...]
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline]
__bpf_prog_run include/linux/filter.h:651 [inline]
bpf_prog_run include/linux/filter.h:658 [inline]
bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline]
bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991
bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359
bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline]
__sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
__do_sys_bpf kernel/bpf/syscall.c:5561 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
__x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fix this by rejecting ptr alu with variable offset on flow_keys.
Applying the patch rejects the program with "R7 pointer arithmetic
on flow_keys prohibited". |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Prevent out-of-bounds memory access
The test_tag test triggers an unhandled page fault:
# ./test_tag
[ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70
[ 130.640501] Oops[#3]:
[ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a
[ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40
[ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000
[ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000
[ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70
[ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0
[ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0
[ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000
[ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000
[ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988
[ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988
[ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
[ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 130.642658] BADV: ffff80001b898004
[ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)]
[ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd)
[ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8
[ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0
[ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000
[ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000
[ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000
[ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000
[ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558
[ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000
[ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc
[ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0
[ 130.644572] ...
[ 130.644629] Call Trace:
[ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988
[ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec
[ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0
[ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44
[ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588
[ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c
[ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94
[ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158
[ 130.645507]
[ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91
[ 130.645729]
[ 130.646418] ---[ end trace 0000000000000000 ]---
On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at
loading a BPF prog with 2039 instructions:
prog = (struct bpf_prog *)ffff80001b894000
insn = (struct bpf_insn *)(prog->insnsi)fff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: netdevsim: don't try to destroy PHC on VFs
PHC gets initialized in nsim_init_netdevsim(), which
is only called if (nsim_dev_port_is_pf()).
Create a counterpart of nsim_init_netdevsim() and
move the mock_phc_destroy() there.
This fixes a crash trying to destroy netdevsim with
VFs instantiated, as caught by running the devlink.sh test:
BUG: kernel NULL pointer dereference, address: 00000000000000b8
RIP: 0010:mock_phc_destroy+0xd/0x30
Call Trace:
<TASK>
nsim_destroy+0x4a/0x70 [netdevsim]
__nsim_dev_port_del+0x47/0x70 [netdevsim]
nsim_dev_reload_destroy+0x105/0x120 [netdevsim]
nsim_drv_remove+0x2f/0xb0 [netdevsim]
device_release_driver_internal+0x1a1/0x210
bus_remove_device+0xd5/0x120
device_del+0x159/0x490
device_unregister+0x12/0x30
del_device_store+0x11a/0x1a0 [netdevsim]
kernfs_fop_write_iter+0x130/0x1d0
vfs_write+0x30b/0x4b0
ksys_write+0x69/0xf0
do_syscall_64+0xcc/0x1e0
entry_SYSCALL_64_after_hwframe+0x6f/0x77 |
