| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Emacs before 29.3, Gnus treats inline MIME contents as trusted. |
| In Emacs before 29.3, LaTeX preview is enabled by default for e-mail attachments. |
| In Emacs before 29.3, Org mode considers contents of remote files to be trusted. This affects Org Mode before 9.6.23. |
| Issue summary: The POLY1305 MAC (message authentication code) implementation
contains a bug that might corrupt the internal state of applications on the
Windows 64 platform when running on newer X86_64 processors supporting the
AVX512-IFMA instructions.
Impact summary: If in an application that uses the OpenSSL library an attacker
can influence whether the POLY1305 MAC algorithm is used, the application
state might be corrupted with various application dependent consequences.
The POLY1305 MAC (message authentication code) implementation in OpenSSL does
not save the contents of non-volatile XMM registers on Windows 64 platform
when calculating the MAC of data larger than 64 bytes. Before returning to
the caller all the XMM registers are set to zero rather than restoring their
previous content. The vulnerable code is used only on newer x86_64 processors
supporting the AVX512-IFMA instructions.
The consequences of this kind of internal application state corruption can
be various - from no consequences, if the calling application does not
depend on the contents of non-volatile XMM registers at all, to the worst
consequences, where the attacker could get complete control of the application
process. However given the contents of the registers are just zeroized so
the attacker cannot put arbitrary values inside, the most likely consequence,
if any, would be an incorrect result of some application dependent
calculations or a crash leading to a denial of service.
The POLY1305 MAC algorithm is most frequently used as part of the
CHACHA20-POLY1305 AEAD (authenticated encryption with associated data)
algorithm. The most common usage of this AEAD cipher is with TLS protocol
versions 1.2 and 1.3 and a malicious client can influence whether this AEAD
cipher is used by the server. This implies that server applications using
OpenSSL can be potentially impacted. However we are currently not aware of
any concrete application that would be affected by this issue therefore we
consider this a Low severity security issue.
As a workaround the AVX512-IFMA instructions support can be disabled at
runtime by setting the environment variable OPENSSL_ia32cap:
OPENSSL_ia32cap=:~0x200000
The FIPS provider is not affected by this issue. |
| When the Node.js policy feature checks the integrity of a resource against a trusted manifest, the application can intercept the operation and return a forged checksum to the node's policy implementation, thus effectively disabling the integrity check.
Impacts:
This vulnerability affects all users using the experimental policy mechanism in all active release lines: 18.x and, 20.x.
Please note that at the time this CVE was issued, the policy mechanism is an experimental feature of Node.js. |
| Insufficient data validation in USB in Google Chrome prior to 119.0.6045.105 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High) |
| CarlinKit CPC200-CCPA update.cgi Improper Verification of Cryptographic Signature Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of CarlinKit CPC200-CCPA devices. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the handling of update packages provided to update.cgi. The issue results from the lack of proper verification of a cryptographic signature. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24355. |
| CarlinKit CPC200-CCPA Improper Verification of Cryptographic Signature Code Execution Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of CarlinKit CPC200-CCPA devices. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of update packages on USB drives. The issue results from the lack of proper verification of a cryptographic signature. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24356. |
| React Router is a router for React. In versions on the 7.0 branch prior to version 7.5.2, it's possible to modify pre-rendered data by adding a header to the request. This allows to completely spoof its contents and modify all the values of the data object passed to the HTML. This issue has been patched in version 7.5.2. |
| An issue in the component MSI.TerminalServer.exe of MSI Center v1.0.41.0 allows attackers to escalate privileges via a crafted TCP packet. |
| open_actions.py in kitty before 0.41.0 does not ask for user confirmation before running a local executable file that may have been linked from an untrusted document (e.g., a document opened in KDE ghostwriter). |
| twisted is an event-driven networking engine written in Python. In affected versions twisted exposes cookies and authorization headers when following cross-origin redirects. This issue is present in the `twited.web.RedirectAgent` and `twisted.web. BrowserLikeRedirectAgent` functions. Users are advised to upgrade. There are no known workarounds. |
| Octobercms is a self-hosted CMS platform based on the Laravel PHP Framework. Affected versions of OctoberCMS did not validate gateway server signatures. As a result non-authoritative gateway servers may be used to exfiltrate user private keys. Users are advised to upgrade their installations to build 474 or v1.1.10. The only known workaround is to manually apply the patch (e3b455ad587282f0fbcb7763c6d9c3d000ca1e6a) which adds server signature validation. |
| wire-server provides back end services for Wire, an open source messenger. In versions of wire-server prior to the 2022-01-27 release, it was possible to craft DSA Signatures to bypass SAML SSO and impersonate any Wire user with SAML credentials. In teams with SAML, but without SCIM, it was possible to create new accounts with fake SAML credentials. Under certain conditions that can be established by an attacker, an upstream library for parsing, rendering, signing, and validating SAML XML data was accepting public keys as trusted that were provided by the attacker in the signature. As a consequence, the attacker could login as any user in any Wire team with SAML SSO enabled. If SCIM was not enabled, the attacker could also create new users with new SAML NameIDs. In order to exploit this vulnerability, the attacker needs to know the SSO login code (distributed to all team members with SAML credentials and visible in the Team Management app), the SAML EntityID identifying the IdP (a URL not considered sensitive, but usually hard to guess, also visible in Team Management), and the SAML NameID of the user (usually an email address or a nick). The issue has been fixed in wire-server `2022-01-27` and is already deployed on all Wire managed services. On premise instances of wire-server need to be updated to `2022-01-27`, so that their backends are no longer affected. There are currently no known workarounds. More detailed information about how to reproduce the vulnerability and mitigation strategies is available in the GitHub Security Advisory. |
| `@chainsafe/libp2p-noise` contains TypeScript implementation of noise protocol, an encryption protocol used in libp2p. `@chainsafe/libp2p-noise` before 4.1.2 and 5.0.3 does not correctly validate signatures during the handshake process. This may allow a man-in-the-middle to pose as other peers and get those peers banned. Users should upgrade to version 4.1.2 or 5.0.3 to receive a patch. There are currently no known workarounds. |
| Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.3.0, RSA PKCS#1 v1.5 signature verification code is lenient in checking the digest algorithm structure. This can allow a crafted structure that steals padding bytes and uses unchecked portion of the PKCS#1 encoded message to forge a signature when a low public exponent is being used. The issue has been addressed in `node-forge` version 1.3.0. There are currently no known workarounds. |
| Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.3.0, RSA PKCS#1 v1.5 signature verification code does not properly check `DigestInfo` for a proper ASN.1 structure. This can lead to successful verification with signatures that contain invalid structures but a valid digest. The issue has been addressed in `node-forge` version 1.3.0. There are currently no known workarounds. |
| Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.3.0, RSA PKCS#1 v1.5 signature verification code does not check for tailing garbage bytes after decoding a `DigestInfo` ASN.1 structure. This can allow padding bytes to be removed and garbage data added to forge a signature when a low public exponent is being used. The issue has been addressed in `node-forge` version 1.3.0. There are currently no known workarounds. |
| ecdsautils is a tiny collection of programs used for ECDSA (keygen, sign, verify). `ecdsa_verify_[prepare_]legacy()` does not check whether the signature values `r` and `s` are non-zero. A signature consisting only of zeroes is always considered valid, making it trivial to forge signatures. Requiring multiple signatures from different public keys does not mitigate the issue: `ecdsa_verify_list_legacy()` will accept an arbitrary number of such forged signatures. Both the `ecdsautil verify` CLI command and the libecdsautil library are affected. The issue has been fixed in ecdsautils 0.4.1. All older versions of ecdsautils (including versions before the split into a library and a CLI utility) are vulnerable. |
| github-action-merge-dependabot is an action that automatically approves and merges dependabot pull requests (PRs). Prior to version 3.2.0, github-action-merge-dependabot does not check if a commit created by dependabot is verified with the proper GPG key. There is just a check if the actor is set to `dependabot[bot]` to determine if the PR is a legit PR. Theoretically, an owner of a seemingly valid and legit action in the pipeline can check if the PR is created by dependabot and if their own action has enough permissions to modify the PR in the pipeline. If so, they can modify the PR by adding a second seemingly valid and legit commit to the PR, as they can set arbitrarily the username and email in for commits in git. Because the bot only checks if the actor is valid, it would pass the malicious changes through and merge the PR automatically, without getting noticed by project maintainers. It would probably not be possible to determine where the malicious commit came from, as it would only say `dependabot[bot]` and the corresponding email-address. Version 3.2.0 contains a patch for this issue. |
