| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xen: privcmd: Fix possible access to a freed kirqfd instance
Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and
privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd
created and added to the irqfds_list by privcmd_irqfd_assign() may get
removed by another thread executing privcmd_irqfd_deassign(), while the
former is still using it after dropping the locks.
This can lead to a situation where an already freed kirqfd instance may
be accessed and cause kernel oops.
Use SRCU locking to prevent the same, as is done for the KVM
implementation for irqfds. |
| In the Linux kernel, the following vulnerability has been resolved:
pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv
The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel
crash when we try to hot-unplug/disable the PCIe switch/bridge from
the PHB.
The crash occurs because although the MSI data structure has been
released during disable/hot-unplug path and it has been assigned
with NULL, still during unregistration the code was again trying to
explicitly disable the MSI which causes the NULL pointer dereference and
kernel crash.
The patch fixes the check during unregistration path to prevent invoking
pci_disable_msi/msix() since its data structure is already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: usb: schedule rx work after everything is set up
Right now it's possible to hit NULL pointer dereference in
rtw_rx_fill_rx_status on hw object and/or its fields because
initialization routine can start getting USB replies before
rtw_dev is fully setup.
The stack trace looks like this:
rtw_rx_fill_rx_status
rtw8821c_query_rx_desc
rtw_usb_rx_handler
...
queue_work
rtw_usb_read_port_complete
...
usb_submit_urb
rtw_usb_rx_resubmit
rtw_usb_init_rx
rtw_usb_probe
So while we do the async stuff rtw_usb_probe continues and calls
rtw_register_hw, which does all kinds of initialization (e.g.
via ieee80211_register_hw) that rtw_rx_fill_rx_status relies on.
Fix this by moving the first usb_submit_urb after everything
is set up.
For me, this bug manifested as:
[ 8.893177] rtw_8821cu 1-1:1.2: band wrong, packet dropped
[ 8.910904] rtw_8821cu 1-1:1.2: hw->conf.chandef.chan NULL in rtw_rx_fill_rx_status
because I'm using Larry's backport of rtw88 driver with the NULL
checks in rtw_rx_fill_rx_status. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id()
mwifiex_get_priv_by_id() returns the priv pointer corresponding to
the bss_num and bss_type, but without checking if the priv is actually
currently in use.
Unused priv pointers do not have a wiphy attached to them which can
lead to NULL pointer dereferences further down the callstack. Fix
this by returning only used priv pointers which have priv->bss_mode
set to something else than NL80211_IFTYPE_UNSPECIFIED.
Said NULL pointer dereference happened when an Accesspoint was started
with wpa_supplicant -i mlan0 with this config:
network={
ssid="somessid"
mode=2
frequency=2412
key_mgmt=WPA-PSK WPA-PSK-SHA256
proto=RSN
group=CCMP
pairwise=CCMP
psk="12345678"
}
When waiting for the AP to be established, interrupting wpa_supplicant
with <ctrl-c> and starting it again this happens:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
| CM = 0, WnR = 0, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000
| [0000000000000140] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio
+mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs
+imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6
| CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18
| Hardware name: somemachine (DT)
| Workqueue: events sdio_irq_work
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| lr : mwifiex_get_cfp+0x34/0x15c [mwifiex]
| sp : ffff8000818b3a70
| x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004
| x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9
| x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000
| x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000
| x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517
| x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1
| x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157
| x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124
| x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000
| Call trace:
| mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex]
| mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex]
| mwifiex_process_sta_event+0x298/0xf0c [mwifiex]
| mwifiex_process_event+0x110/0x238 [mwifiex]
| mwifiex_main_process+0x428/0xa44 [mwifiex]
| mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio]
| process_sdio_pending_irqs+0x64/0x1b8
| sdio_irq_work+0x4c/0x7c
| process_one_work+0x148/0x2a0
| worker_thread+0x2fc/0x40c
| kthread+0x110/0x114
| ret_from_fork+0x10/0x20
| Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000)
| ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Add missing bridge lock to pci_bus_lock()
One of the true positives that the cfg_access_lock lockdep effort
identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70
RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70
Call Trace:
<TASK>
? __warn+0x8c/0x190
? pci_bridge_secondary_bus_reset+0x5d/0x70
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? pci_bridge_secondary_bus_reset+0x5d/0x70
pci_reset_bus+0x1d8/0x270
vmd_probe+0x778/0xa10
pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets.
Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses
pci_bus_lock() before issuing the reset which locks everything *but* the
bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add
pci_dev_lock() for @bus->self to pci_bus_lock().
[bhelgaas: squash in recursive locking deadlock fix from Keith Busch:
https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush()
This adds a check before freeing the rx->skb in flush and close
functions to handle the kernel crash seen while removing driver after FW
download fails or before FW download completes.
dmesg log:
[ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080
[ 54.643398] Mem abort info:
[ 54.646204] ESR = 0x0000000096000004
[ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits
[ 54.655286] SET = 0, FnV = 0
[ 54.658348] EA = 0, S1PTW = 0
[ 54.661498] FSC = 0x04: level 0 translation fault
[ 54.666391] Data abort info:
[ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000
[ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000
[ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse
[ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2
[ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT)
[ 54.744368] Workqueue: hci0 hci_power_on
[ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 54.757249] pc : kfree_skb_reason+0x18/0xb0
[ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart]
[ 54.782921] sp : ffff8000805ebca0
[ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000
[ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230
[ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92
[ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff
[ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857
[ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642
[ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688
[ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000
[ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac
[ 54.857599] Call trace:
[ 54.857601] kfree_skb_reason+0x18/0xb0
[ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart]
[ 54.863888] hci_dev_open_sync+0x3a8/0xa04
[ 54.872773] hci_power_on+0x54/0x2e4
[ 54.881832] process_one_work+0x138/0x260
[ 54.881842] worker_thread+0x32c/0x438
[ 54.881847] kthread+0x118/0x11c
[ 54.881853] ret_from_fork+0x10/0x20
[ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400)
[ 54.896410] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup
report_fixup for the Cougar 500k Gaming Keyboard was not verifying
that the report descriptor size was correct before accessing it |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: free driver_data after destroying hid device
HID driver callbacks aren't called anymore once hid_destroy_device() has
been called. Hence, hid driver_data should be freed only after the
hid_destroy_device() function returned as driver_data is used in several
callbacks.
I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling
KASAN to debug memory allocation, I got this output:
[ 13.050438] ==================================================================
[ 13.054060] BUG: KASAN: slab-use-after-free in amd_sfh_get_report+0x3ec/0x530 [amd_sfh]
[ 13.054809] psmouse serio1: trackpoint: Synaptics TrackPoint firmware: 0x02, buttons: 3/3
[ 13.056432] Read of size 8 at addr ffff88813152f408 by task (udev-worker)/479
[ 13.060970] CPU: 5 PID: 479 Comm: (udev-worker) Not tainted 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0
[ 13.063978] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024
[ 13.067860] Call Trace:
[ 13.069383] input: TPPS/2 Synaptics TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 13.071486] <TASK>
[ 13.071492] dump_stack_lvl+0x5d/0x80
[ 13.074870] snd_hda_intel 0000:33:00.6: enabling device (0000 -> 0002)
[ 13.078296] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.082199] print_report+0x174/0x505
[ 13.085776] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.089367] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.093255] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.097464] kasan_report+0xc8/0x150
[ 13.101461] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.105802] amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.110303] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.114879] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.119450] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082]
[ 13.124097] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.127404] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.131925] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.136455] ? _raw_spin_lock_irqsave+0x96/0xf0
[ 13.140197] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.143602] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b]
[ 13.147234] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.150446] ? __devm_add_action+0x167/0x1d0
[ 13.155061] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.158581] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.161814] platform_probe+0xa2/0x150
[ 13.165029] really_probe+0x1e3/0x8a0
[ 13.168243] __driver_probe_device+0x18c/0x370
[ 13.171500] driver_probe_device+0x4a/0x120
[ 13.175000] __driver_attach+0x190/0x4a0
[ 13.178521] ? __pfx___driver_attach+0x10/0x10
[ 13.181771] bus_for_each_dev+0x106/0x180
[ 13.185033] ? __pfx__raw_spin_lock+0x10/0x10
[ 13.188229] ? __pfx_bus_for_each_dev+0x10/0x10
[ 13.191446] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.194382] bus_add_driver+0x29e/0x4d0
[ 13.197328] driver_register+0x1a5/0x360
[ 13.200283] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.203362] do_one_initcall+0xa7/0x380
[ 13.206432] ? __pfx_do_one_initcall+0x10/0x10
[ 13.210175] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.213211] ? kasan_unpoison+0x44/0x70
[ 13.216688] do_init_module+0x238/0x750
[ 13.2196
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: sanity check symbolic link size
Syzkiller reports a "KMSAN: uninit-value in pick_link" bug.
This is caused by an uninitialised page, which is ultimately caused
by a corrupted symbolic link size read from disk.
The reason why the corrupted symlink size causes an uninitialised
page is due to the following sequence of events:
1. squashfs_read_inode() is called to read the symbolic
link from disk. This assigns the corrupted value
3875536935 to inode->i_size.
2. Later squashfs_symlink_read_folio() is called, which assigns
this corrupted value to the length variable, which being a
signed int, overflows producing a negative number.
3. The following loop that fills in the page contents checks that
the copied bytes is less than length, which being negative means
the loop is skipped, producing an uninitialised page.
This patch adds a sanity check which checks that the symbolic
link size is not larger than expected.
--
V2: fix spelling mistake. |
| In the Linux kernel, the following vulnerability has been resolved:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE)
and parse_lease_state() return NULL.
Fix this by check if 'lease_ctx_info' is NULL.
Additionally, remove the redundant parentheses in
parse_durable_handle_context(). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix double free of 'buf' in error path
smatch warning:
drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf'
In fastrpc_req_mmap() error path, the fastrpc buffer is freed in
fastrpc_req_munmap_impl() if unmap is successful.
But in the end, there is an unconditional call to fastrpc_buf_free().
So the above case triggers the double free of fastrpc buf. |
| In the Linux kernel, the following vulnerability has been resolved:
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
For primary VM Bus channels, primary_channel pointer is always NULL. This
pointer is valid only for the secondary channels. Also, rescind callback
is meant for primary channels only.
Fix NULL pointer dereference by retrieving the device_obj from the parent
for the primary channel. |
| In the Linux kernel, the following vulnerability has been resolved:
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove()
may not remove the intended one, but the object will still be freed
as in the case of the datagram type in vmci_datagram_destroy_handle().
vmci_resource_table will still hold a pointer to this freed resource
leading to a use-after-free vulnerability.
BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239
__kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425
kasan_report+0x38/0x51 mm/kasan/report.c:442
vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182
ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444
kref_put include/linux/kref.h:65 [inline]
vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline]
vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195
vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143
__fput+0x261/0xa34 fs/file_table.c:282
task_work_run+0xf0/0x194 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187
exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220
__syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline]
syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313
do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0x0
This change ensures the type is also checked when removing
the resource from vmci_resource_table in vmci_resource_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix kernel crash if commands allocation fails
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery()
When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the
first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers
WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference
issue.
Fix it by adding the check in ublk_ctrl_start_recovery() and return
immediately in case of zero 'ub->nr_queues_ready'.
BUG: kernel NULL pointer dereference, address: 0000000000000028
RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x75/0x170
? exc_page_fault+0x64/0x140
? asm_exc_page_fault+0x22/0x30
? ublk_ctrl_start_recovery.constprop.0+0x82/0x180
ublk_ctrl_uring_cmd+0x4f7/0x6c0
? pick_next_task_idle+0x26/0x40
io_uring_cmd+0x9a/0x1b0
io_issue_sqe+0x193/0x3f0
io_wq_submit_work+0x9b/0x390
io_worker_handle_work+0x165/0x360
io_wq_worker+0xcb/0x2f0
? finish_task_switch.isra.0+0x203/0x290
? finish_task_switch.isra.0+0x203/0x290
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: fix the Out-of-bounds read warning
using index i - 1U may beyond element index
for mc_data[] when i = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix possible NULL pointer dereference
profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made
from __create_missing_ancestors(..) and 'ent->old' is NULL in
aa_replace_profiles(..).
In that case, it must return an error code and the code, -ENOENT represents
its state that the path of its parent is not existed yet.
BUG: kernel NULL pointer dereference, address: 0000000000000030
PGD 0 P4D 0
PREEMPT SMP PTI
CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:aafs_create.constprop.0+0x7f/0x130
Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae
RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0
Call Trace:
<TASK>
? show_regs+0x6d/0x80
? __die+0x24/0x80
? page_fault_oops+0x99/0x1b0
? kernelmode_fixup_or_oops+0xb2/0x140
? __bad_area_nosemaphore+0x1a5/0x2c0
? find_vma+0x34/0x60
? bad_area_nosemaphore+0x16/0x30
? do_user_addr_fault+0x2a2/0x6b0
? exc_page_fault+0x83/0x1b0
? asm_exc_page_fault+0x27/0x30
? aafs_create.constprop.0+0x7f/0x130
? aafs_create.constprop.0+0x51/0x130
__aafs_profile_mkdir+0x3d6/0x480
aa_replace_profiles+0x83f/0x1270
policy_update+0xe3/0x180
profile_load+0xbc/0x150
? rw_verify_area+0x47/0x140
vfs_write+0x100/0x480
? __x64_sys_openat+0x55/0xa0
? syscall_exit_to_user_mode+0x86/0x260
ksys_write+0x73/0x100
__x64_sys_write+0x19/0x30
x64_sys_call+0x7e/0x25c0
do_syscall_64+0x7f/0x180
entry_SYSCALL_64_after_hwframe+0x78/0x80
RIP: 0033:0x7be9f211c574
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574
RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004
RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80
R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30
</TASK>
Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas
CR2: 0000000000000030
---[ end trace 0000000000000000 ]---
RIP: 0010:aafs_create.constprop.0+0x7f/0x130
Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae
RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix null pointer dereference in trace
ucsi_register_altmode checks IS_ERR for the alt pointer and treats
NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled,
ucsi_register_displayport returns NULL which causes a NULL pointer
dereference in trace. Rather than return NULL, call
typec_port_register_altmode to register DisplayPort alternate mode
as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled. |
