Export limit exceeded: 429943 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 429943 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429943 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99765 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix demo-mode dynamic ACL dev-entry UAF vs LUN teardown A demo-mode (generate_node_acls=1) login that allocates a dynamic NodeACL populates that ACL's per-LUN dev entries in core_tpg_add_node_to_devs() *before* the ACL is linked onto tpg->acl_node_list by target_add_node_acl(): core_tpg_check_initiator_node_acl(): ... core_tpg_add_node_to_devs(acl, tpg, NULL); /* builds deves */ target_add_node_acl(acl); /* only now listed */ The LUN teardown sweep, core_clear_lun_from_tpg(), enumerates only tpg->acl_node_list, so a dev entry whose ACL is still in the window above is invisible to the sweep and is never disabled. It is left on the se_lun->lun_deve_list after core_tpg_remove_lun() frees the se_lun; when the same unpacked_lun is later re-added and the se_lun is reallocated at the same address, the stale dev entry is rediscovered by target_nacl_find_deve() and core_enable_device_list_for_node() corrupts lun_deve_list: BUG: KASAN: slab-use-after-free ... core_enable_device_list_for_node+0x5ce/0x880 core_tpg_add_node_to_devs+0x169/0x190 core_dev_add_lun+0x146/0x190 target_fabric_port_link+0xe9/0x1b0 configfs_symlink+0x381/0xae0 __x64_sys_symlink+0x55/0x80 The demo-mode login path that drives the ACL/dev-entry creation is reachable by an unauthenticated initiator; the colliding LUN add/remove is a local configfs operation. Commit 49cb77e297dc ("target: Avoid mappedlun symlink creation during lun shutdown") introduced se_lun->lun_shutdown and guarded the *explicit* ACL MappedLUN path (target_fabric_mappedlun_link()), but the demo-mode automatic path, core_tpg_add_node_to_devs() -> core_enable_device_list_for_node(), was never given the equivalent guard, and the publish-after-populate ordering in core_tpg_check_initiator_node_acl() was left unchanged. Fix it in three cooperating parts: 1) Publish the dynamic NodeACL onto acl_node_list *before* creating its dev entries, so the teardown sweep can observe them. 2) Refuse to attach a dev entry to an se_lun that is shutting down, checked under nacl->lun_entry_mutex -- the same lock the sweep takes -- so once the sweep has passed an ACL any later enable for that LUN observes lun_shutdown and skips it. 3) In core_enable_device_list_for_node(), insert the new dev entry onto lun->lun_deve_list while still holding nacl->lun_entry_mutex, in both the replace and the new-entry branch. Previously the entry was added to nacl->lun_entry_hlist under the mutex but to lun->lun_deve_list only after dropping it; with the ACL now published early, the sweep could take the mutex in that gap, find the entry on the hlist, core_disable_device_list_for_node() it (list_del() on the not-yet- linked lun_link succeeds and the entry is freed), and then the enable would list_add_tail() the freed entry back onto lun_deve_list. Linking both lists under the mutex makes enable and the sweep mutually exclusive, closing that window. core_tpg_add_node_to_devs() already ignores the return value of core_enable_device_list_for_node(), so a shutting-down LUN is simply skipped. | ||||
| CVE-2026-99753 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Fix double free on BO initialization failure If ttm_bo_init_validate() fails, it drops the buffer object's reference and cleans it up through the supplied destroy callback. lsdc_bo_destroy() releases the GEM object and frees the enclosing lsdc_bo, so freeing it again in lsdc_bo_create() causes a double free on a synchronous failure path. Let TTM own the cleanup after initialization has started and return the error directly. Keep the explicit free on drm_gem_object_init() failure, which occurs before ownership is passed to TTM. Tested on LS7A2000 by making drm_vma_offset_add() return -ENOSPC for one selected dumb-buffer creation. The error reached userspace, the destroy callback ran once, and no handle was published or tracked BO retained. Normal buffer creation, zeroing, mapping, readback and release passed. AI assistance was used for the ownership analysis, fix, fault-injection tools, build and test execution. | ||||
| CVE-2026-99728 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix list corruption when deferred_split_scan() races with deferred_split_folio() Since the deferred split queue became a list_lru, the isolate callback moves the folios it took a reference on to an on-stack list, linked through folio->_deferred_list, and deferred_split_scan() takes them off that list with list_del_init() without holding the list_lru lock. deferred_split_folio() does not know about the on-stack list. It only holds the list_lru lock when it looks at the same list_head, and it can run for such a folio: a THP is queued when it is mapped, as a candidate for the underused check, and is queued "again" when a part of it gets unmapped: CPU0 deferred_split_scan() CPU1 deferred_split_folio() list_del_init(&folio->_deferred_list) next->prev = prev prev->next = next entry->next = entry list_lru_lock_irqsave() folio_set_partially_mapped() __list_lru_add() list_empty(item) -> true list_add_tail(item, &l->list) item->next = &l->list item->prev = tail entry->prev = entry The folio now sits on the list_lru with ->prev pointing to itself. The next removal leaves the neighbours pointing to it, and they still do so after the folio has been freed. With CONFIG_DEBUG_LIST: list_del corruption. prev->next should be ffd4000000270090, but was ffd4000000278090. (prev=ffd4000000270090) Fix it by grabbing the lock around list_del_init() so deferred_split_folio() cannot race with it. | ||||
| CVE-2026-99723 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix pinned page leak in vhost_vdpa_pa_map() error path When pin_user_pages() or vhost_vdpa_map() fails, vhost_vdpa_pa_map() is supposed to unpin the pages pinned after the last successfully mapped chunk, i.e. the range [map_pfn, last_pfn]. The unpin is guarded by nchunks, but nchunks is reset to 0 every time a chunk is mapped from inside the current page list, so a failure after any such boundary leaves that pending range pinned forever. With physically scattered memory nearly every page list contains a boundary, so the leak happens on practically every failed IOTLB update. The pending range is non-empty exactly when a page has been pinned, which last_pfn already tells us, so drop nchunks and test last_pfn. | ||||
| CVE-2026-99694 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: do not index before the entry array when dividing an empty bucket ocfs2_divide_xattr_bucket() appends an empty bucket carrying a sentinel hash when the source bucket has no divide position, taking that hash from xh_entries[start - 1]. ocfs2_xattr_find_divide_pos() returns count when every entry shares one hash, and its loop does not run at all for count < 2, so an empty bucket comes back with start == count == 0 and the read is xh_entries[-1]. That is outside the __counted_by_le(xh_count) bounds of xh_entries[] and lands on the header, so the value picked up is xh_count | xh_free_start << 16. One above it is written into the new bucket's xh_entries[0] and committed, which leaves a bucket whose first hash does not follow the bucket before it. ocfs2_xattr_bucket_find() binary searches on xh_entries[0], so the broken key hides the range the sentinel was meant to cover: getxattr() answers -ENODATA for an attribute that is stored, and an insert can go to the wrong bucket and leave two copies of a name. The cross cluster divide hands the same value back as a tree record's e_cpos, which then claims a hash range it does not cover. Read xh_entries[0] instead. The branch is only reached when every entry shares one hash, so for a non-empty bucket it holds the same value, and for an empty one it is the slot that carries the bucket key. An empty bucket reaches the divide from ocfs2_check_xattr_bucket_collision(), which reports no collision for one, through ocfs2_add_new_xattr_bucket() and ocfs2_extend_xattr_bucket(). It does not take a failed set to get there: a divide that finds no position is itself what leaves an empty sentinel bucket behind, and a later extend can pick it as the target. | ||||
| CVE-2026-130793 | 1 Gpac | 1 Gpac | 2026-11-20 | 6.6 Medium |
| GPAC before 26.07.0 contains a stack-based buffer overflow vulnerability in gf_filter_pid_resolve_file_template_ex() in src/filter_core/filter_pid.c that allows local attackers to write past fixed GF_MAX_PATH stack buffers. Attackers can convince a user to segment a crafted NHML input referencing an overly long media file name with MP4Box -dash to crash the process. | ||||
| CVE-2026-130635 | 1 Gpac | 1 Gpac | 2026-11-20 | 5.5 Medium |
| GPAC before 26.07.0 contains an uncontrolled recursion vulnerability in dasher_gather_deps() in src/filters/dasher.c that fails to detect cyclic stream dependency chains. Attackers can supply a crafted MPEG-2 TS file that MP4Box processes with -dash, exhausting the stack and crashing the process for denial of service. | ||||
| CVE-2026-130634 | 1 Gpac | 1 Gpac | 2026-11-20 | 5.5 Medium |
| GPAC before 26.07.0 contains a heap-based buffer overflow in gf_mpd_resolve_url() in src/media_tools/mpd.c that allows attackers to write past a heap buffer via crafted DASH manifests. Attackers can supply a crafted MPD whose segment template expands beyond the allocation through unchecked strcat() calls, crashing MP4Box and causing denial of service. | ||||
| CVE-2026-130632 | 1 Gpac | 1 Gpac | 2026-11-20 | 5.5 Medium |
| GPAC before 26.02.0 contains an out-of-bounds read vulnerability in m2tsdmx_send_packet() in src/filters/dmx_m2ts.c caused by double-skipping the VC-1 start-code offset. Attackers can supply a crafted MPEG-2 TS VC-1 stream that underflows the remaining length, causing memcpy() to over-read and crash MP4Box on import. | ||||
| CVE-2025-62841 | 3 Qnap, Qnap Systems, Qnap Systems Inc. | 3 Hybrid Backup Sync, Hbs 3 Hybrid Backup Sync, Hbs 3 Hybrid Backup Sync | 2026-11-20 | N/A |
| An use of hard-coded cryptographic key vulnerability has been reported to affect Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system. We have already fixed the vulnerability in the following version: Hybrid Backup Sync 26.4.0.521 and later Hybrid Backup Sync 26.4.1.563 and later | ||||
| CVE-2025-62839 | 3 Qnap, Qnap Systems, Qnap Systems Inc. | 3 Hybrid Backup Sync, Hbs 3 Hybrid Backup Sync, Hbs 3 Hybrid Backup Sync | 2026-11-20 | N/A |
| An use of hard-coded cryptographic key vulnerability has been reported to affect Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system. We have already fixed the vulnerability in the following version: Hybrid Backup Sync 26.4.0.521 and later Hybrid Backup Sync 26.4.1.563 and later | ||||
| CVE-2026-133491 | 1 Konstanty | 1 Libmodplug | 2026-11-20 | 6.3 Medium |
| A flaw has been found in Konstanty libmodplug up to 0.8.9.1. The affected element is the function abc_add_drum of the file src/load_abc.cpp of the component ABC File Handler. Executing a manipulation can lead to out-of-bounds read. The attack may be performed from remote. Upgrading to version 0.8.9.2 is sufficient to fix this issue. This patch is called 540f0b8ec3d7979e17a8d6a55e31b8a7b734d463. It is recommended to upgrade the affected component. | ||||
| CVE-2026-75542 | 1 Hexpm | 1 Hexpm | 2026-11-20 | N/A |
| Incorrect Authorization vulnerability in the OAuth token endpoint in hexpm hexpm allows an API key holding the repositories permission to read another organization's private packages. When an API key is exchanged for a token through the OAuth client_credentials grant, validate_scopes_against_key/2 in lib/hexpm_web/controllers/api/oauth_controller.ex admits a requested scope whenever the key carries the repositories permission and the scope string begins with repository:. The organization name is never resolved against the principal, and expand_repositories_scope/3 only rewrites the literal repositories scope, so an explicit repository:<name> passes through untouched. Both CDN edges authorize repository access from the token claim without querying the database, so the minted token is read access to that organization's private packages until it expires. This issue affects hex.pm: from 2025-10-18 before 2026-08-24; hexpm/hexpm: from 71829cb6f6559bcceb1ef4e43a2fb8cdd3af654b before bf0fb9d208f0acfabf7a2f7467c8231659e322a8. | ||||
| CVE-2026-75554 | 1 Hexpm | 1 Hexpm | 2026-11-20 | N/A |
| Insufficient Session Expiration vulnerability in the OAuth token refresh grant in hexpm hexpm allows a user removed from an organization to keep reading its private packages. expand_repositories_scope/3 in lib/hexpm/permissions.ex only rewrites the literal repositories scope, so an explicitly granted repository:<org> or docs:<org> scope passes through it untouched. The refresh grant re-derives a new token from the stored granted_scopes, which holds that expanded form, so every refresh reproduces the organization scope without revisiting membership. Because both CDN edges authorize repository access from the token claim without querying the database, an account removed from an organization retains read access for as long as it keeps refreshing, bounded by the 30 day refresh token lifetime rather than the 30 minute access token lifetime. This issue affects hex.pm: from 2025-10-10 before 2026-08-24; hexpm/hexpm: from 650faa03af511e74c1b3b49ec12d35666b6984c4 before 50cffd206490c49c92d7b63c8505949682abedb0. | ||||
| CVE-2026-23940 | 2 Hex, Hexpm | 2 Hexpm, Hexpm | 2026-11-20 | 6.5 Medium |
| Uncontrolled Resource Consumption vulnerability in hexpm hexpm/hexpm allows Excessive Allocation. Publishing an oversized package can cause Hex.pm to run out of memory while extracting the uploaded package tarball. This can terminate the affected application instance and result in a denial of service for package publishing and potentially other package-processing functionality. This issue affects hex.pm: before 2026-03-10; hexpm/hexpm: from 82911daf5f8fb2ab44f298e3ba22b90bc1ae3746 before 495f01607d3eae4aed7ad09b2f54f31ec7a7df01. | ||||
| CVE-2026-86533 | 1 Team-alembic | 2 Ash Authentication, Ash Authentication Phoenix | 2026-11-20 | N/A |
| Insufficient Session Expiration vulnerability in team-alembic AshAuthentication and AshAuthentication Phoenix allows a revoked session to remain fully authenticated. A resource configured with session_identifier :jti and require_token_presence_for_authentication? disabled stores its session value as <jti>:<subject>. The jti is there so that signing out can revoke that one session. Neither reader consults it: AshAuthentication.Plug.Helpers.authenticate_resource_from_session/4 and AshAuthentication.Phoenix.LiveSession.on_mount/4 both split the value with split_identifier/2, discard the jti and pass the bare subject to AshAuthentication.subject_to_user/3, which reloads the record. The token-presence branch of each function does check its token, calling AshAuthentication.TokenResource.Actions.get_token/3 with the jti and the purpose user. Because the revocation record is never read, neither its revoked state nor its expiry constrains the session, so a session captured before sign-out keeps working. This issue affects ash_authentication: from 4.9.1 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14; ash_authentication_phoenix: from 2.10.0 before 2.17.4 and from 3.0.0-rc.0 before 3.0.0-rc.11. | ||||
| CVE-2026-86698 | 1 Hexpm | 1 Hexpm | 2026-11-20 | N/A |
| Insufficient Session Expiration vulnerability in OAuth token issuance in hexpm hexpm allows a user whose organization membership or session has ended to keep reading the organization's private packages and their documentation tarballs via a retained refresh token. generate_refresh_token/4 in lib/hexpm/oauth/jwt.ex signs the refresh token with the same iss, aud and scope claims as the access token, so it carries the same repository:<org> scopes. The CDN service that serves private repositories verifies the signature and time claims and then authorizes from the scope claim, with no database lookup and no way to tell the two token kinds apart. Removing a member or revoking a session therefore takes effect at the CDN only when the 30 day refresh token expires, instead of after the 30 minute access token lifetime. Access is read-only and limited to organizations the account belonged to when the token was granted. This issue affects hex.pm: from 2025-10-10 before 2026-09-22; hexpm/hexpm: from 650faa03af511e74c1b3b49ec12d35666b6984c4 before db58cf3a86c7639708ef52ff86de0b4f938e6360. | ||||
| CVE-2026-94206 | 1 Danielberkompas | 2 Cloak, Cloak Ecto | 2026-11-20 | N/A |
| Use of Password Hash With Insufficient Computational Effort vulnerability in danielberkompas cloak_ecto and danielberkompas cloak allows an attacker who holds the hashed values and the configured secret to brute-force low-entropy plaintexts much faster than configured. The dump/1 callback that Cloak.Ecto.PBKDF2 (Cloak.Fields.PBKDF2 in cloak before the Ecto code moved to cloak_ecto) injects into a field module calls :pbkdf2.pbkdf2/4 with config[:size] in the iteration-count position. The :iterations setting is validated but never used. With the cloak_ecto defaults (iterations: 600_000, size: 32) each hash runs 32 PBKDF2 rounds instead of 600,000, so offline guessing of values such as email addresses costs about 18,750 times less than configured. This issue affects cloak: from 0.7.0 before 1.0.0-alpha.0; cloak_ecto: from 1.0.0-alpha.0 onward. | ||||
| CVE-2026-133490 | 1 Declare-lab | 1 Tango | 2026-11-20 | 6.3 Medium |
| A vulnerability was detected in declare-lab tango up to 34ecd38898508017ca937508a047b42817d2b070. Impacted is the function Tango.__init__ of the file tango.py of the component Model Loading. Performing a manipulation of the argument scheduler_name results in improper input validation. The attack is possible to be carried out remotely. The exploit is now public and may be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-105963 | 1 Elixir-plug | 2 Plug, Plug Crypto | 2026-11-20 | N/A |
| Externally-Generated Error Message Containing Sensitive Information vulnerability in plug_crypto in elixir-plug plug_crypto allows an unauthenticated remote attacker to expose the secret key base through application logs via a wrong-typed argument. Every public function in Plug.Crypto validates argument types in a function-head guard. A failed guard makes the Erlang VM raise FunctionClauseError with the actual argument values in the top stack frame, so the secret key base, a derived key, or the value an API key is compared against lands in that frame. The library's rescue blocks and Plug.Crypto.prune_args_from_stacktrace/1 only reach exceptions raised inside a function body, so they never see a guard failure. Plug.Cowboy and Bandit write the frame to the error log and attach it as crash_reason Logger metadata, which error trackers forward. Two entry points take request data. Plug.Crypto.verify/4 exposes the secret key base when the token is neither a binary nor nil, which Phoenix.Token.verify/4 reaches because it forwards the token unguarded. Plug.Crypto.secure_compare/2 exposes the other operand when one side is not a binary, as happens when a missing request header yields nil. Reading the leaked value needs separate access to the logs or the error tracker, so the request alone does not disclose the secret to the attacker. This issue affects plug: from 1.6.3 before 1.7.0; plug_crypto: from 1.0.0 before 2.2.1. | ||||