| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped
Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force
vCPUs to reload/recheck their guest-provided VMSA if the backing gmem
page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core
logic to handle invalidations as VMX does for the APIC-access page, as the
two concepts are nearly identical: shove the physical address of a page
into the vCPU's control structure:
1. Snapshot the invalidation sequence counter
2. Grab the pfn (from guest_memfd in this case)
3. Acquire mmu_lock for read
4. Re-request reload if retry is needed, otherwise commit the change.
Note, the re-request action in #4 is necessary as KVM's retry logic is
fuzzy, i.e. can get false positives. If the guest_memfd page has been
dropped, at some point a subsequent reload will fail to get a PFN from
guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false
positive, KVM will retry until there are no relevant MMU notifier events
(and will retry in the "outer" loop, i.e. will drop locks and resched as
needed).
Note #2! Take care to invalidate the VMSA when a relevant memslot is
DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated
on memslot bindings (KVM doesn't know what GFN range(s) to invalidate
without a binding). And more importantly, the VMSA mapping requires a
memslot, i.e. must be invalidated if its memslots disappears, regardless of
the state of the underlying guest_memfd inode.
Failure to invalidate the vCPU's control.vmsa_pa (which is checked by
pre_sev_run()) can prevent KVM from properly freeing the page as firmware
will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU
is actively running, i.e. if VMSA page is in-use. That in turn leads to an
RMP #PF on the next use, as the page will still be assigned to the SNP VM.
SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3
SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f]
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
Call Trace:
<TASK>
dump_stack_lvl+0x54/0x70
rmpupdate+0x12c/0x140
rmp_make_shared+0x3b/0x60
sev_gmem_invalidate+0xe0/0x170 [kvm_amd]
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
------------[ cut here ]------------
SEV: Failed to update RMP entry for PFN 0x78d198 error -14
WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd]
Call Trace:
<TASK>
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
irq event stamp: 20689
hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60
hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60
softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
---[ end trace 0000000000000000 ]---
BUG: unable to handle page fault for address: ffff99
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Validate MSI data before routing it to EIOINTC
pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as
the irq number. The MSI data comes from userspace, that either via a
KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd
and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked
against EIOINTC_IRQS.
eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the
256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and
the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value
>= 256 reads and writes memory past the end of those arrays, i.e. any
process holding a VM fd can corrupt kernel memory beyond the allocation
of loongarch_eiointc.
Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC
path is unaffected as it decodes the vector from the address and masks
it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Resume device before setting EOS flag
Setting the EOS flag talks to the firmware via send_firmware_command(),
which accesses VPU registers. Both the STREAMOFF path
(wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path
(wave5_vpu_dec_stop()) can run while the device is runtime suspended, so
those register accesses hit powered-down hardware and the SoC raises an
asynchronous SError, panicking the kernel:
SError Interrupt on CPU3, code 0x00000000bf000000 -- SError
send_firmware_command+0x2c/0x160 [wave5]
wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5]
wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5]
wave5_vpu_dec_job_abort+0x44/0xa0 [wave5]
v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem]
v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem]
Resume the device with pm_runtime_resume_and_get() around the EOS
firmware command and release it with pm_runtime_put_autosuspend(),
matching the runtime PM handling already done in
wave5_vpu_dec_device_run(). |
| In the Linux kernel, the following vulnerability has been resolved:
kho: fix size calculation in kho_preserved_memory_reserve()
kho_preserved_memory_reserve() calculates the size of a preservation by
doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it
can only be shifted by 31. That is, it will only work for preservations
up to 2 GiB. Larger preservations will trigger undefined behaviour.
While preservations larger than 2 GiB can't be obtained via folios
currently, they can be obtained via kho_preserve_pages().
For example, memblock reserve_mem uses kho_preserve_pages().
Reservations larger than 2 GiB are valid and will trigger this bug if
properly aligned.
Fix it by using 1UL for shifting. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Fix PMU event info array size overflow
SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo)
in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010
truncate to 16. KVM then allocates one entry but loops over the original
num_events, causing out-of-bounds reads and writes. A nested guest
triggered:
BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
Read of size 4 at addr ff600000074d46b0 by task init/1
Call Trace:
[<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
[<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268
[<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6
[<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540
[<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80
Allocated by task 1:
__kmalloc_noprof+0x19e/0x4b0
kvm_riscv_vcpu_pmu_event_info+0x72/0x142
kvm_sbi_ext_pmu_handler+0xca/0x268
kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6
kvm_riscv_vcpu_exit+0x48c/0x540
kvm_arch_vcpu_ioctl_run+0x37e/0xc80
The buggy address is located 0 bytes to the right of
allocated 16-byte region [ff600000074d46a0, ff600000074d46b0)
Store the shared-memory size in size_t and reject multiplication overflow.
Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged
to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings.
Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index
to match num_events. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve CCA CPRB length and overflow checks
The xcrb_msg_to_type6cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Integer overflow after CEIL4 alignment: Signed int variables could
overflow during 4-byte boundary alignment, causing undersized
buffer allocations or incorrect bounds checking.
2. Missing minimum size validation: The CPRBX structure is copied from
userspace without verifying sufficient buffer length. Undersized
buffers cause uninitialized memory access when reading structure
fields like cprbx.cprb_len and cprbx.domain.
3. Arithmetic overflow in sum calculations: Adding control block and
data block sizes could overflow, bypassing size checks and enabling
buffer overflows.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, validating minimum control block size before
copying from userspace, and detecting sum calculation overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve EP11 CPRB length and overflow checks
The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Missing minimum size validation: The ep11_cprb structure and
subsequent payload fields (pld_tag, pld_lenfmt) are copied from
userspace without verifying sufficient buffer length.
2. Arithmetic overflow in length calculations: CEIL4 alignment could
overflow, bypassing size checks and enabling buffer overflows.
3. The payload is asn1 encoded but the function just uses a simple c
struct overlay to access some fields of the payload.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, and validating minimum request size and
minimum reply size before copying from userspace. Do a very simple
asn1 parsing of the payload up to the function value field. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Pad trailing CCA or EP11 message with zeros
The both functions xcrb_msg_to_type6cprb_msgx() and
xcrb_msg_to_type6_ep11cprb_msgx() copy the user space message into a
kernel buffer based on the message length. But on further processing
the message is supposed to be 4 byte length adjusted. Thus up to 3
bytes of uninitialized kernel memory are forwarded to further
processing steps and may unwanted expose kernel memory to the crypto
card firmware.
This patch contains code to pad the gap between user space copied
message and message buffer length sent down to further processing of
the CCA or EP11 message to zeros. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: ffa: Add NULL check in optee_ffa_lend_protmem
Sashiko (locally) reports a possible null dereference under memory
pressure due to the lack of validation of the allocated pointer.
Fix that by adding the missing check. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: defer key slot crypto freeing to workqueue
Key slots are released through a kref and the existing release path
frees the AEAD transforms from an RCU callback. That is not safe for all
crypto implementations: crypto_free_aead can sleep, for example when an
async or hardware implementation has teardown work to complete.
Use queue_rcu_work for key-slot release. This keeps the RCU grace period
needed by lockless key-slot readers, but runs the actual crypto teardown
from workqueue context where sleeping is allowed. Once the rcu_work
callback runs, pre-existing RCU readers are gone, and the final kref put
already proves that no transform user remains, so the worker can release
the AEAD transforms and free the slot directly.
The previous patch drains ovpn_wq during module exit, so queued key-slot
teardown work cannot outlive module text. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages()
Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma)
before returning an error code to the caller. This is incorrect:
amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling
amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo
that registration. Calling vm_ops->close() manually — which drops the
shmem pages_pin_count and the GEM object reference that backs the VMA —
before the mmap syscall has even returned causes those resources to be
released while the VMA is still alive. The kernel VMA teardown will call
vm_ops->close() a second time when the process later unmaps the range,
producing a reference count underflow.
Replace both hard-error returns with a deferred-fault approach that keeps
the VMA alive and retries page insertion through the HMM range-fault path. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix locally exploitable BUG_ON in amdxdna_insert_pages()
In amdxdna_insert_pages(), vm_flags_mod() sets VM_MIXEDMAP and clears
VM_PFNMAP. If an unprivileged userspace process mmaps a non-imported GEM
object and then calls madvise(MADV_DONTNEED), the PTEs will be
successfully cleared because VM_MIXEDMAP allows this (unlike VM_PFNMAP).
When userspace subsequently accesses the memory, drm_gem_shmem_fault()
handles the page fault and attempts to map the backing shmem page via
vmf_insert_pfn() which calls vmf_insert_pfn_prot(). Because the backing
shmem page is normal system memory (pfn_valid(pfn) is true) and the VMA
now has VM_MIXEDMAP set, won't this predictably trigger the explicit
assertion BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn))
Fix by removing the vm_flags_mod() call and replacing the vm_insert_pages()
pre-population with the handle_mm_fault() loop that was already used for
the import (dma-buf) path. |
| The Gutenverse Form WordPress plugin before 3.0.11 does not sanitize SVG icon markup stored in its form blocks before it is decoded and inserted into the page in the browser, allowing authenticated users with Contributor-level access and above to store malicious SVG that executes JavaScript in the session of any user who views or previews the affected form, such as an administrator reviewing a pending post. |
| The Spin Wheel WordPress plugin before 2.2.1 does not verify that a visitor actually performed a legitimate spin before returning and consuming a configured prize coupon, allowing unauthenticated users to disclose and drain the stored coupon codes of any campaign, including unpublished ones. |
| The Easy HTTPS Redirection (SSL) WordPress plugin before 2.0.2 does not perform capability checks in some of its AJAX actions, allowing any authenticated user, such as a Subscriber, to read URLs its content scanner collected from private and draft posts and from site options, and to trigger a site-wide rewrite of those URLs, once an administrator has run a scan. |
| The Cardinity Payment Gateway for WooCommerce WordPress plugin before 3.4.2 does not properly verify the authenticity of the payment notifications it receives, as the secret used to sign them is empty by default, allowing unauthenticated attackers to forge an approved-payment notification and mark arbitrary orders as paid, or force them to failed. |
| The eaSYNC Booking WordPress plugin before 1.3.31 does not perform authorization or nonce checks on several of its cancellation-related AJAX actions, allowing unauthenticated users to create booking cancellation requests, trigger booking notification emails, and overwrite the content of the emails the site sends. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Dan Rossiter Document Gallery document-gallery allows Reflected XSS.This issue affects Document Gallery: from n/a through 5.1.1. |
| CAI Content Credentials is affected by an Improper Verification of Cryptographic Signature vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue does not require user interaction. |
| The Bit integrations – Form Integration, Webhook, Spreadsheets, CRM, LMS & Email Automation plugin for WordPress is vulnerable to Privilege Escalation via Log Re-execution in all versions up to, and including, 2.10.6 The vulnerability exists because `IntegrationHandler::executeWithCapture()` stores raw, attacker-controlled field values — including `user_pass` and `user_email` — verbatim into `wp_btcbi_log.field_data` on anonymous front-end requests with no capability check, and `LogHandler::reexecute()` feeds that stored payload back through `Flow::execute()` inside the replaying administrator's session without validating the identity that originally produced the data, causing `RegistrationController::updateUser()` to resolve the target user ID to the administrator and write the attacker-supplied password via `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite the administrator's password and fully take over the administrator account. Exploitation requires that an administrator has configured a flow mapping a user-supplied form field to the `user_pass` parameter of the WP User Registration "Update User" action, and that the administrator subsequently clicks "Re-execute" on the failure log row produced by the anonymous submission from the plugin's log screen. |