| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION
smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION,
that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns
FileSysIdentifier. Those eight bytes go to the client as they are found
in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
Report the file system id statfs() returned, which is what the field is
for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so
assemble the value first, val[0] as the low half, and convert it on the
way out. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION
smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION,
that is the whole of struct smb2_fs_control_info, but never assigns
FileSystemControlFlags. Those four bytes go to the client as they are
found in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
ksmbd does not implement quota tracking, so report no control flags. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in
smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION,
that is the whole of struct object_id_info, but writes only 46 of them:
- objid[] is 16 bytes, and when the volume UUID is not available only
sizeof(stfs.f_fsid) (8) bytes are copied into it;
- extended_info.version_string[] is STRING_LENGTH (28) bytes, and only
strlen("1.1.0") (5) bytes are copied into it.
The response buffer is zeroed on allocation (kvzalloc() in
smb2_allocate_rsp_buf()), so for a standalone request the remaining 31
bytes are zero. In a compound request they need not be. The offset of
the next response is advanced by the length pinned for the previous one,
so if a preceding command wrote its reply into the buffer and then
failed, smb2_set_err_rsp() pins only the short error response and the
next reply lands inside the area that has already been written. Only
the header is cleared there:
memset((char *)rsp_hdr, 0, sizeof(struct smb2_hdr) + 2);
The client then receives up to 31 bytes of a response it was not meant
to see, including one that failed with an access denied error.
Clear the structure before filling it in. As a side effect
version_string is now NUL terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: free the userptr ranges when a CS fails after parser_bos
amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of
the BO list and looks up the user pages. Those ranges are only freed when
amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks
them under the notifier lock. If amdgpu_cs_patch_jobs(),
amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of
amdgpu_cs_submit() fails, nothing frees them: neither
amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e->range.
Each such CS then leaks the range, its hmm_pfns array (8 bytes per page
of the userptr BO) and the BO reference the range holds. An IB on a ring
that patches the CS in place (e.g. VCN) with an unmapped va_start fails
in amdgpu_cs_patch_ibs() and takes this path.
Free the ranges on those error paths. Ranges amdgpu_cs_submit() already
dropped are NULL, so freeing them again is a no-op.
(cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267) |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ
With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to
ops.enqueue() instead of being kept running. Exiting tasks without
SCX_OPS_ENQ_EXITING, migration disabled tasks without
SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue()
and go straight to the local DSQ. This happens in put_prev_task_scx() after
the pick has settled on idle, so nothing reschedules the CPU, which idles
with the task queued until an unrelated wakeup lands on it or the watchdog
fires.
scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit
this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for
over 40 seconds.
A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST
enqueue left the task on this CPU's local DSQ, set need_resched on the task
being switched in, as proxy_resched_idle() does. resched_curr() would flag
the task being put instead, and __schedule() clears that right after the
pick. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix unbound pool lifetime for pending pwqs
KASAN reports a use-after-free of an unbound worker_pool in
node_activate_pending_pwq():
BUG: KASAN: slab-use-after-free in _raw_spin_trylock+0x6d/0x120
Read of size 4 at addr ffff8880089ce000 by task kworker/u22:0/318
CPU: 1 UID: 0 PID: 318 Comm: kworker/u22:0 Not tainted 7.2.0 #1 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: 0x0 (flush-8:0)
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x610
kasan_report+0xce/0x100
_raw_spin_trylock+0x6d/0x120
pwq_dec_nr_in_flight+0x4b4/0xcb0
process_one_work+0x921/0x11a0
worker_thread+0x4d0/0xd20
kthread+0x2de/0x3c0
ret_from_fork+0x3aa/0x620
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 311:
alloc_pwq+0x439/0xca0
apply_wqattrs_prepare+0x75e/0xd10
apply_workqueue_attrs_locked+0x44/0xa0
wq_nice_store+0x350/0x450
Freed by task 0:
kfree+0x127/0x3b0
rcu_core+0x523/0x1780
handle_softirqs+0x1b3/0x610
Last potentially related work creation:
put_unbound_pool+0x3f3/0x7d0
pwq_release_workfn+0x494/0x8e0
kthread_worker_fn+0x1ff/0x790
Canceling the last inactive work skips pwq_dec_nr_active(), so an empty
pwq can remain on pending_pwqs when its refcnt reaches zero.
pwq_release_workfn() currently puts the pool before removing that pwq.
If this drops the last pool reference, the pool can be RCU-freed while
the pwq remains reachable, and node_activate_pending_pwq() may trylock
the freed pool->lock.
Remove the pwq from pending_pwqs before putting the pool. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate firmware record lengths
The p54 firmware parser accesses component ID and component version
records without checking that their lengths cover the fields being read.
A malformed record can therefore make the parser read past the record.
Validate the component ID and component version record lengths before
accessing their data. The descriptor record is also checked against the
shortest descriptor length found in the supported firmware images.
Reject descriptor values that underflow the RX offset or produce an empty
RX range before updating the driver state. |
| Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations.
Apache Kafka Connect also support Configuration Providers which enable to hide the values of sensitive configuration and only resolve them at runtime.
An attacker with access to the validate endpoint can use it to resolve and return plaintext values via any of the configuration providers installed on a Connect worker.
Users are recommended to upgrade to version 4.2.2, 4.3.2, 4.4.0 or above, which fix this issue. |
| FOSSBilling before 0.8.9 contains a Cross-Site Request Forgery vulnerability in the staff guest login endpoint (POST /api/guest/staff/login) that allows remote attackers to force authentication because checkGuestClientAuthentication() only allowlists client_login and client_create, leaving staff_login without CSRF or Origin validation. Attackers can host an auto-submitting HTML form with attacker-controlled credentials to silently log a victim's browser into the attacker's staff account. |
| Prometheus through 3.15.1 contains a credential leak vulnerability that allows attackers to capture Azure AD or Google IAM bearer tokens by redirecting remote_write requests to another host. Attackers controlling the remote-write endpoint or a redirecting server can return a 3xx to their host and replay the token, for example to write metrics to the victim's backend. |
| phpMyAdmin through 5.2.3 contains a stored cross-site scripting vulnerability that allows database users with CREATE privilege to inject script via unescaped table names in DesignerHistory.display(). Attackers can create a table whose name contains HTML markup that executes in another user's session when they add a condition on it in Designer query mode. |
| phpMyAdmin through 5.2.3 contains an sql injection vulnerability that allows authenticated users to inject SQL by supplying unescaped col_extra and col_attribute values to /database/central-columns. Attackers can inject SQL into pma__central_columns INSERT and UPDATE queries run with controluser privileges, reading or modifying other users' configuration-storage data. |
| OpenLiteSpeed through 1.9.4 contains an authentication bypass vulnerability that allows unauthenticated remote attackers to evade virtual host client certificate requirements over HTTP/3. Because QuicStream inherits a verifyContext() implementation that always returns true, attackers can present a non-mTLS host's SNI with a protected Host header to access protected content. |
| OpenCart through 4.1.0.4 contains a business logic vulnerability that allows logged-in customers to place unpaid full-price orders by clearing reward points after selecting Free Checkout. Attackers can apply points, save Free Checkout, then submit zero points via reward.save so the confirm handler advances the order to Free Checkout status without payment. |
| Moodle 4.2.0 through 4.5.15, 5.0.0 through 5.0.11, 5.1.0 through 5.1.8, 5.2.0 through 5.2.4, and 5.3.0 contain an information disclosure vulnerability in the core_grades_get_feedback web service. The service lacks group-membership and enrolment checks, so non-editing teachers can iterate userid values to read other groups' grade feedback and users' names and identity fields such as email. |
| Moodle 5.3.0, 5.2.0 through 5.2.4, 5.1.0 through 5.1.8, 5.0.0 through 5.0.11, and through 4.5.15 contain an sql injection vulnerability in the External database enrolment plugin via course idnumber. Editing teachers can store a backslash-quote payload in idnumber that executes during scheduled sync on MySQL/MariaDB external databases, reading data and manipulating enrolment results. |
| Jellyfin through 12.4 contains an authorization bypass vulnerability in SuggestionsController.GetSuggestions that allows authenticated non-administrator users to bypass library and parental restrictions by omitting the userId parameter. Attackers can repeatedly call GET /Items/Suggestions without userId to enumerate restricted items, including IDs and server filesystem paths, and then stream them. |
| Jellyfin through 12.4 contains an information disclosure vulnerability in PlaylistsController.GetPlaylist that allows authenticated users to read hidden item IDs by requesting public or shared playlists. Restricted or parental-controlled users can obtain GUIDs of inaccessible library items from unfiltered playlist ItemIds and then stream that hidden media. |
| Forgejo through 15.0.11, 16.0.0 through 16.0.7, and 17.0.0 through 17.0.1 contains an information disclosure vulnerability in the GetPublicKey API handler that lacks an ownership check on key lookups. Authenticated users with a read:user token or session can enumerate sequential key IDs to obtain titles, fingerprints and public key material of other users' SSH, deploy and principal keys. |
| Forgejo through 15.0.11, 16.0.0 through 16.0.7, and 17.0.0 through 17.0.1 contains a path traversal vulnerability in restore-repo that allows attackers to read files outside the dump directory via crafted asset paths. Attackers can supply a dump whose release.yml DownloadURL or PatchURL contains ../ sequences, importing files like app.ini as release attachments when an administrator restores it. |