| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_transport: Reject oversized TX buffers
ntb_process_tx() handles an oversized buffer by calling tx_handler()
with a NULL data pointer and returning success. ntb_netdev therefore
neither frees the skb in its completion callback nor takes its enqueue
error path, leaking it.
Reject oversized buffers in ntb_transport_tx_enqueue() before acquiring
a queue entry and return -EMSGSIZE. The caller retains ownership of the
buffer, and the preceding netdev patch frees the skb when enqueue
returns this permanent error. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix use-after-free in smc_rx_pipe_buf_release()
smc_rx_splice() hands RMB pages to a pipe and takes a socket reference
per entry so the smc_sock stays alive until the reader finishes. The
connection does not: a concurrent close runs smc_conn_free(), which
releases the receive buffer back to the link group pool.
smc_rx_pipe_buf_release() tests sk_state before taking the socket lock.
The state can change between the test and the lock, and
smc_rx_update_cons() then dereferences conn->rmb_desc and walks
conn->lgr, which smc_conn_free() has already released. On the
is_reg_err path smcr_buf_unuse() frees the descriptor outright, so
this is a use-after-free.
Take the socket lock first and test conn->freed instead.
smc_conn_free() sets that flag before releasing anything, and every
caller holds the socket lock. The two paths exclude each other: either
the pipe release runs first with everything valid, or it sees the flag
and skips the update. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cap advertised IP tunnel headroom
IP tunnel devices derive their advertised needed_headroom from lower
output devices. A stack of user-created devices can make the derived
value larger than the 16-bit skb header offsets can represent. Once IP
output reserves it, skb head expansion can wrap those offsets.
The runtime transmit path already caps a growing needed_headroom at 512.
Apply the same cap when tunnel configuration publishes needed_headroom
derived from a lower output device.
Capping the advertised value is safe: IP tunnel transmit still expands
the skb when a packet needs more headroom. A nonsensical stacked
configuration can therefore incur an extra reallocation, but it cannot
publish an unbounded reservation to upper layers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't touch shared zerocopy state in skb_tx_error()
skb_tx_error() completes the zerocopy uarg and clears
SKBFL_ALL_ZEROCOPY, and skb_zcopy_downgrade_managed() clears
SKBFL_MANAGED_FRAG_REFS. Both live in skb_shinfo(), which every clone
shares, while the caller only owns the reference it is about to drop.
Through a clone it tells the producer its pages are free and drops
SKBFL_SHARED_FRAG for an skb that is still in flight.
Open vSwitch reaches this with a non-last OVS_ACTION_ATTR_RECIRC:
clone_execute() sends a skb_clone() into ovs_dp_process_packet() while
do_execute_actions() keeps forwarding the original, and skb_clone()
does not privatise the frags here -- skb_orphan_frags() returns early
on SKBFL_DONT_ORPHAN. A flow miss on the clone then strips the marker
from the packet still being forwarded, and a later local ESP delivery
decrypts in place over frags it does not own privately.
Skip it for a cloned skb. Nothing is lost: skb_release_data() clears
the zerocopy state once the last reference to the shared data goes. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: clear the URB pointers on disconnect
bcd2000_free_usb_related_resources() frees both URBs and leaves the
pointers behind:
usb_kill_urb(bcd2k->midi_out_urb);
usb_kill_urb(bcd2k->midi_in_urb);
usb_free_urb(bcd2k->midi_out_urb);
usb_free_urb(bcd2k->midi_in_urb);
The rawmidi device outlives that call. A substream that is still open
when the device is unplugged reaches bcd2000_midi_send() from the
trigger path on close. That function writes to the freed URB and then
hands it to the USB core:
bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE;
...
ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC);
usb_kill_urb() does not stop a later submission either, so a submit that
races the disconnect can requeue the URB after it has been reaped.
midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits
it from the completion handler.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000]
Write of size 4 at addr ffff00001827d388 by task bpoc/168
__asan_store4
bcd2000_midi_send [snd_bcd2000]
bcd2000_midi_output_trigger [snd_bcd2000]
snd_rawmidi_kernel_write1
close_substream.part.0
Freed by task 168:
usb_free_urb
bcd2000_disconnect [snd_bcd2000]
BUG: KASAN: slab-use-after-free in usb_submit_urb
Read of size 8 at addr ffff00001827d3b8 by task bpoc/168
Clear both pointers after freeing and test them on the paths that can
still run. Poison the URBs before freeing them: usb_poison_urb() waits
for a running completion handler and rejects any later submission, so
after it returns the input path is quiesced and only the rawmidi trigger
path can still reach bcd2000_midi_send(). No unpoison is needed; the
URBs are freed on the next line.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Detach sync cmd buffer on interrupted wait
mwifiex synchronous commands keep the caller-provided data buffer in
cmd_node->data_buf. Several callers pass stack-allocated objects there.
If wait_event_interruptible_timeout() is interrupted, the caller can
return and release that stack object while the firmware command is still
the current command. A late firmware response then reaches the normal
response handler, which can copy data through cmd_node->data_buf into the
stale stack address.
This fixes a stack corruption observed during repeated association and
disassociation cycles. The panic trace showed the command wait being
interrupted immediately before a bad pointer dereference:
cmd_wait_q terminated: -512
Unable to handle kernel paging request at virtual address 002c583837384662
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted
...
Tainted: [M]=MACHINE_CHECK
The fault address decodes as little-endian ASCII:
0x002c583837384662 -> "bF878X,\0"
which is a fragment of the VERSION_EXT firmware string exposed as
debugfs "verext":
w8997o-V4, RF878X, FP92, 16.92.21.p153.7
The same runs also showed corrupted control data containing:
0x2400372e333531 -> "153.7\0$"
which is the tail of the same VERSION_EXT string. This points at a late
VERSION_EXT response writing through a stale stack-backed data_buf after
the interrupted wait returned.
After cancelling pending commands on an interrupted or timed-out wait,
detach the caller-owned data buffer from the still-current command. This
preserves the existing command cancellation behaviour while preventing a
late response from writing through a pointer whose lifetime ended with the
waiting caller.
Tested on an i.MX8MP board using an 88W8997. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: flush works in dependency order
virtio_vsock_remove() stops the virtqueues and then flushes each work
item before freeing the enclosing virtio_vsock. The current order does
not account for dependencies between those items: tx_work may queue
send_pkt_work, and send_pkt_work may queue rx_work.
In particular, send_pkt_work can set restart_rx and release tx_lock.
The remove path can then stop the queues and flush rx_work before
send_pkt_work queues it. Although the later send_pkt_work flush waits
for that producer to finish, nothing waits for the newly queued rx_work,
so kfree(vsock) can race with it.
KASAN reported:
BUG: KASAN: slab-use-after-free in
virtio_transport_rx_work+0x487/0x4b0
Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtio_transport_rx_work+0x487/0x4b0
process_one_work+0x688/0x1120
worker_thread+0x45b/0xd10
Allocated by task 1:
virtio_vsock_probe+0xef/0x6b0
Freed by task 84:
kfree+0x131/0x3c0
virtio_vsock_remove+0xd1/0x100
Flush the works in producer-to-consumer order. virtio_vsock_vqs_del()
has already disabled the queue callbacks and cleared the run flags, so
after tx_work and send_pkt_work are drained, no source remains that can
queue rx_work after its flush. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76285 are related to improper adherence to coding standards and are grouped under the Common Weakness Enumeration (CWE) CWE-710. |
| IBM i 7.3, 7.4, 7.5, and 7.6 could allow a remote attacker to perform unauthorized manipulation of distributed transactions due to improper validation of attacker-supplied transaction identifiers. |
| IceCMS through 4.1.5 contains a missing authentication vulnerability that allows unauthenticated attackers to modify, delete, or disable any account because /User/** is excluded from the Shiro jwt filter. Attackers can send PUT requests to /User/updateUser to set a new password and role on any userId, including administrators, enabling full account takeover. |
| BeikeShop through 2.0.0.31 contains an insecure direct object reference vulnerability in the markAsShipped handler of RmaController that allows authenticated customers to modify other customers' returns. Attackers can submit sequential RMA ids to the account/rmas/{id}/mark_as_shipped endpoint to overwrite courier names and tracking numbers and mark approved returns as shipped. |
| Engineercms through 2.0.5 contains a missing authorization vulnerability in AttachController.Attachment that allows unauthenticated attackers to download project image and video attachments. Attackers can request known or derived /attachment/* paths for .jpg, .png, .bmp, or .mp4 files, which are served before casbin, owner, or admin checks. |
| PickMall lilishop through 5.0.0 contains an insecure direct object reference vulnerability that allows authenticated buyers to read other buyers' invoice records because ReceiptServiceImpl.getDetail performs no ownership check. Attackers can supply another buyer's receipt id to GET /buyer/trade/receipt/{id} to obtain invoice titles, taxpayer identification numbers, order numbers, member ids and member names. |
| FastapiAdmin through 3.0 contains a hard-coded JWT signing secret in backend/app/config/setting.py that allows low-privileged users to forge tokens impersonating the superuser. Attackers can register via the unauthenticated /api/v1/system/user/register endpoint, log in, and forge an HS256 token keeping their session_id but naming the superuser in user_name to gain superuser privileges. |
| smart-sso through 2.1.1 contains an open redirect vulnerability in the /login handler that allows unauthenticated attackers to steal OAuth2 authorization codes by supplying an unvalidated redirectUri parameter. Attackers can send crafted /login links to users with active SSO sessions, then redeem stolen codes at /oauth2/access_token with any valid client credentials to obtain victims' access tokens. |
| Dragonfly through 2.0.2 contains an unbounded memory allocation vulnerability that allows unauthenticated clients to exhaust memory by passing a negative COUNT to HRANDFIELD, ZRANDMEMBER or SRANDMEMBER. Attackers can send a single command against a one-element key with a huge negative COUNT to trigger the OOM killer, terminating the instance for all clients. |
| IBM Db2 Genius Hub 1.0 could allow a remote authenticated attacker to bypass security restrictions due to a missing initialization vector in the cryptographic algorithm. |
| IBM Db2 Genius Hub 1.0 could allow a local attacker to obtain sensitive information due to improper verification of cryptographic signature. |
| ExtUtils::Typemaps::STL::List versions before 1.07 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion.
Note that a similar issue was fixed in ExtUtils::Typemaps::STL::Vector version 1.05. |
| MP4v2 through 2.1.3 contains a heap-based out-of-bounds read in MP4File::GetChapters() that allows attackers to read past heap allocations via crafted QuickTime chapter samples. Attackers can supply an MP4 file whose chapter sample is shorter than its declared title length, crashing applications like mp4chaps or leaking adjacent heap memory into chapter titles. |