Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23102 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53733 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_u32: Undo tcf_bind_filter if u32_replace_hw_knode When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter operation done at u32_set_parms. | ||||
| CVE-2023-53651 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: exc3000 - properly stop timer on shutdown We need to stop the timer on driver unbind or probe failures, otherwise we get UAF/Oops. | ||||
| CVE-2023-53523 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB. | ||||
| CVE-2023-53447 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) | ||||
| CVE-2023-53394 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix crash on regular rq reactivation When the regular rq is reactivated after the XSK socket is closed it could be reading stale cqes which eventually corrupts the rq. This leads to no more traffic being received on the regular rq and a crash on the next close or deactivation of the rq. Kal Cuttler Conely reported this issue as a crash on the release path when the xdpsock sample program is stopped (killed) and restarted in sequence while traffic is running. This patch flushes all cqes when during the rq flush. The cqe flushing is done in the reset state of the rq. mlx5e_rq_to_ready code is moved into the flush function to allow for this. | ||||
| CVE-2023-53261 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: Fix memory leak in acpi_buffer->pointer There are memory leaks reported by kmemleak: ... unreferenced object 0xffff00213c141000 (size 1024): comm "systemd-udevd", pid 2123, jiffies 4294909467 (age 6062.160s) hex dump (first 32 bytes): 04 00 00 00 02 00 00 00 18 10 14 3c 21 00 ff ff ...........<!... 00 00 00 00 00 00 00 00 03 00 00 00 10 00 00 00 ................ backtrace: [<000000004b7c9001>] __kmem_cache_alloc_node+0x2f8/0x348 [<00000000b0fc7ceb>] __kmalloc+0x58/0x108 [<0000000064ff4695>] acpi_os_allocate+0x2c/0x68 [<000000007d57d116>] acpi_ut_initialize_buffer+0x54/0xe0 [<0000000024583908>] acpi_evaluate_object+0x388/0x438 [<0000000017b2e72b>] acpi_evaluate_object_typed+0xe8/0x240 [<000000005df0eac2>] coresight_get_platform_data+0x1b4/0x988 [coresight] ... The ACPI buffer memory (buf.pointer) should be freed. But the buffer is also used after returning from acpi_get_dsd_graph(). Move the temporary variables buf to acpi_coresight_parse_graph(), and free it before the function return to prevent memory leak. | ||||
| CVE-2023-53149 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid deadlock in fs reclaim with page writeback Ext4 has a filesystem wide lock protecting ext4_writepages() calls to avoid races with switching of journalled data flag or inode format. This lock can however cause a deadlock like: CPU0 CPU1 ext4_writepages() percpu_down_read(sbi->s_writepages_rwsem); ext4_change_inode_journal_flag() percpu_down_write(sbi->s_writepages_rwsem); - blocks, all readers block from now on ext4_do_writepages() ext4_init_io_end() kmem_cache_zalloc(io_end_cachep, GFP_KERNEL) fs_reclaim frees dentry... dentry_unlink_inode() iput() - last ref => iput_final() - inode dirty => write_inode_now()... ext4_writepages() tries to acquire sbi->s_writepages_rwsem and blocks forever Make sure we cannot recurse into filesystem reclaim from writeback code to avoid the deadlock. | ||||
| CVE-2022-50457 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: core: Fix refcount error in del_mtd_device() del_mtd_device() will call of_node_put() to mtd_get_of_node(mtd), which is mtd->dev.of_node. However, memset(&mtd->dev, 0) is called before of_node_put(). As the result, of_node_put() won't do anything in del_mtd_device(), and causes the refcount leak. del_mtd_device() memset(&mtd->dev, 0, sizeof(mtd->dev) # clear mtd->dev of_node_put() mtd_get_of_node(mtd) # mtd->dev is cleared, can't locate of_node # of_node_put(NULL) won't do anything Fix the error by caching the pointer of the device_node. OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/spi-sram@0 CPU: 3 PID: 275 Comm: python3 Tainted: G N 6.1.0-rc3+ #54 0d8a1edddf51f172ff5226989a7565c6313b08e2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x67/0x83 kobject_get+0x155/0x160 of_node_get+0x1f/0x30 of_fwnode_get+0x43/0x70 fwnode_handle_get+0x54/0x80 fwnode_get_nth_parent+0xc9/0xe0 fwnode_full_name_string+0x3f/0xa0 device_node_string+0x30f/0x750 pointer+0x598/0x7a0 vsnprintf+0x62d/0x9b0 ... cfs_overlay_release+0x30/0x90 config_item_release+0xbe/0x1a0 config_item_put+0x5e/0x80 configfs_rmdir+0x3bd/0x540 vfs_rmdir+0x18c/0x320 do_rmdir+0x198/0x330 __x64_sys_rmdir+0x2c/0x40 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd [<miquel.raynal@bootlin.com>: Light reword of the commit log] | ||||
| CVE-2026-99125 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pai: Handle multiple PMU stop callback invocations Handle the following scenario: The kernel protects itself against a very high sampling load and throttles the sampling using: perf_event_throttle() --> PMU->stop() Shortly later the scheduler may terminate the task and removes it from the CPU. It again calls PMU->stop() which results in two invocations of PMU->stop() called back to back. Protect against this and check the PERF_HES_STOPPED bit on function entry. If it is already set return. Clear bit PERF_HES_STOPPED in PMU->start(). Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event. It sets perf_event::event_limit to a positive value and causes perf_event_overflow() to invoke pai_stop() call back function when perf_event::event_limit hits zero. This is not supported because the sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out of a task. Use list_for_each_entry_safe() for safe iteration over syswide_list in pai_have_samples(). | ||||
| CVE-2026-99129 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix BPF token permission checks Avoid multiple lookups of the bpffs creator SID using the token's file descriptor when the same information can be found via the resolved path/dentry (in selinux_bpf_token_create()) or the token itself (in selinux_bpf_map_create() and selinux_bpf_prog_load()). Not only does this simplify the code, it avoids potential TOCTOU issues if the user changes the token file descriptor passed into the kernel. | ||||
| CVE-2026-99137 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 3.6 Low |
| In the Linux kernel, the following vulnerability has been resolved: cifs: don't update i_size in cifs_do_truncate without a cached handle If find_writable_file() returns null, cifs_file_flush will return 0 without issuing set_file_size, and the outer 'if (!rc)' block will set i_size to 0 before telling the server to truncate. If the cifs_open() then fails, the inode will have size 0, while the server file is unchanged. Move the netfs_resize_file() and cifs_setsize() into the 'if (cfile)', so they only run after a successful set_file_size. In the no-handle else branch, evict stale pages with truncate_inode_pages before the O_TRUNC open to dispose of old cache pages, and let the open response set the i_size. | ||||
| CVE-2026-99146 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Add sanity check for DMC load address For DMC firmware header version 3, the firmware load address is stored in dmc_info->start_mmioaddr and later used by dmc_load_program(). Unlike the MMIO address table, the firmware load address is not validated. Add a sanity check to ensure it is within the valid range. BSpec: 69671, 68378 (cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c) | ||||
| CVE-2026-99149 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix GEM object leak on ENOMEM in userptr ioctl When amdgpu_hmm_range_alloc() fails amdgpu_gem_userptr_ioctl() returns -ENOMEM right away and skips the cleanup every other error path goes through. The GEM object, the bo->parent reference on the VM root and the MMU notifier registration are all left behind. Use release_object here, not user_pages_done, range is still NULL at this point. (cherry picked from commit bbe739e407a542073ec1a7872b14843566b4919e) | ||||
| CVE-2026-98917 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Increase kernel stack size to 32kb For 64-bit Linux kernels, increase the default kernel stack size (THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been triggered recently when building the debian vtk9 package with gcc 17: stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000) Kernel panic - not syncing: low stack detected by irq handler - check messages CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE Tainted: [W]=WARN Hardware name: 9000/800/rp3440 Workqueue: writeback wb_workfn (flush-259:0) Backtrace: [<000000004022f050>] show_stack+0x70/0x90 [<000000004022378c>] dump_stack_lvl+0x124/0x190 [<000000004022382c>] dump_stack+0x34/0x48 [<000000004020212c>] vpanic+0x204/0x648 [<00000000402025c4>] panic+0x54/0x58 [<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440 [<0000000040227070>] intr_return+0x0/0xc | ||||
| CVE-2026-98930 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is called for a Stop and Store Status operation, if the vCPU is running, the interrupt is marked as pending and the status is stored by the thread performing the KVM_RUN IOCTL. If the vCPU is already stopped, the status is stored immediately. Storing the status means writing into userspace, which might fault, and __inject_sigp_stop() is called from do_inject_vcpu() which in turn is always called holding a spinlock, which is obviously an issue. Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and adding a bool flag to indicate whether a store status is needed. The callers of do_inject_vcpu() are modified to pass the pointer to the bool flag; whenever a Store Status operation is needed, the callers can now perform it outside the spinlock. Opportunistically refactor kvm_s390_set_irq_state() to use scoped_guard() and __free(). [ Added Fixes tag while picking -- Claudio ] | ||||
| CVE-2026-98983 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: unshare: don't drop active namespace references that were never taken Active references on the namespaces of an nsproxy are taken when the nsproxy is installed into a task in switch_task_namespaces() and copy_namespaces() and dropped again by put_nsproxy() through deactivate_nsproxy(). But ksys_unshare() calls put_nsproxy() on an nsproxy that was never installed when set_cred_ucounts() fails. The new namespaces of that nsproxy go from zero to minus one and the namespaces shared with the caller lose a reference that belongs to the nsproxy the caller keeps using: WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230 nsproxy_ns_active_put deactivate_nsproxy ksys_unshare Afterwards the namespaces the caller lives in aren't listed by listns() anymore. set_cred_ucounts() only fails when alloc_ucounts() can't allocate and it only allocates when the real uid of the caller differs from its effective uid. Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify create_new_namespaces()") separated the two cases on purpose. nsproxy_free() frees an nsproxy that was prepared but never installed and that's what a failed setns() uses in put_nsset(). Export it and use it for a failed unshare() as well. | ||||
| CVE-2026-98921 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_do_mkdir() debug print ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir(). Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on failure."), vfs_mkdir() calls end_creating() on the input dentry on failure and may replace it on success, so the post-call %pd can use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled. Print the dentry before the call and only the result afterward. | ||||
| CVE-2026-98937 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Check kernel access when kernel callchains are requested perf_event_open() currently gates perf_allow_kernel() only on !attr.exclude_kernel. However, users can still request kernel callchain collection with attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1. That still requires kernel profiling privilege, but the existing check does not enforce it. Update the permission check to call perf_allow_kernel() when either kernel sampling is requested or kernel callchains are requested. This keeps permission checks aligned with requested data and prevents unprivileged use of kernel callchain capture. | ||||
| CVE-2026-98942 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Build the cid tables privately and publish them with RCU The cid tables are visible to the cid kfuncs while being modified: the first enable publishes the global pointers before filling them, ops.init_cids() overrides rewrite them in place, and re-enables rebuild them in place. A racing TRACING or SYSCALL program can read unfilled entries, including uninitialized memory in the kmalloc'd tables, or torn topo updates. Tie the tables' lifetimes to the root sched instead: each root enable builds a fresh set privately and publishes the per-table __rcu globals once the layout is final, and root disable unpublishes and RCU-frees the set. A non-NULL global is now always a fully built table which stays valid for the reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as no-mapping, also after the scheduler exits instead of reporting the stale last mapping. The cid kfuncs are available whether the root scheduler is cid-form or cpu-form, the latter to allow gradual migration to cids. Every root therefore builds and publishes a default mapping. Every reader must either be gated on scheduler liveness or NULL-check inside an RCU read section. Fix the two kfuncs that were neither: scx_bpf_this_cid() read the table with no RCU or preemption protection and scx_bpf_task_cid() relied on KF_RCU, which doesn't put a sleepable program in an RCU read section. The hotplug callbacks are instead serialized by retiring the tables inside the cpus_read_lock() section that clears scx_root. v2: Document why every root builds the tables (desc + cid.c comment). | ||||
| CVE-2026-98946 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Disable the V3D interrupt across runtime suspend vc4_irq_disable() masks the V3D interrupt sources and then calls synchronize_irq() before the V3D is powered down. However, by itself, this is not enough to quiesce the interrupt handler. synchronize_irq() waits for handlers that have already set IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE. A GIC interrupt chip is able to mark an interrupt active as soon as a CPU acknowledges it, so there these checks cover the whole dispatch path. On RPi 0-3, however, the interrupt controller is ARMCTRL, which has no active state. A CPU that has read the hwirq out of the pending register but has not yet reached handle_level_irq() stays invisible to synchronize_irq(). During a power transition, vc4_irq() may therefore run after the power domain is off, where every V3D register read will return 0xdeadbeef. 0xdeadbeef has FLDONE, FRDONE and OUTOMEM set. This problem doesn't trigger NULL pointer dereference issues only because the functions vc4_irq_finish_bin_job() and vc4_irq_finish_render_job() return early when there is no job pointer, but OUTOMEM is still able to schedule vc4_overflow_mem_work() after vc4_irq_disable() has already cancelled it. Therefore, fix the spurious interrupts by disabling the interrupt line across the PM transition. To preserve the enable/disable balance, move vc4_irq_install() and request the IRQ line disabled before the first runtime resume. | ||||