| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A local attacker on the same host as the application may be able to take control of the directory used by `ApplicationTemp`. When `server.servlet.session.persistent` is set to `true` and the attack persists across application restarts, this may allow the attacker to read session information and hijack authenticated users or deploy a gadget chain and execute code as the application's user.
Affected: Spring Boot 4.0.0–4.0.5 (fix 4.0.6), 3.5.0–3.5.13 (fix 3.5.14), 3.4.0–3.4.15 (fix 3.4.16), 3.3.0–3.3.18 (fix 3.3.19), 2.7.0–2.7.32 (fix 2.7.33); predictable temp directory / `ApplicationTemp` ownership verification. Versions that are no longer supported are also affected per vendor advisory. |
| In Spring AI, having access to a shared environment can expose the ONNX model used by the application.
Affected versions:
Spring AI: 1.0.0 - 1.0.5 (fixed in 1.0.6), 1.1.0 - 1.1.4 (fixed in 1.1.5) |
| OpenClaw before 2026.3.31 contains a configuration management vulnerability where startup migration treats empty-array settings as missing values. Attackers can restart the application to rehydrate revoked Tlon configuration from file state, bypassing intended revocation controls. |
| The Aranda File Server (AFS) component in Aranda Software Aranda Service Desk before 8.3.12 stores daily activity logs with predictable names in a publicly accessible directory, which allows unauthenticated remote attackers to obtain direct virtual paths of uploaded files and bypass access controls to download sensitive documents containing PII. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| OpenClaw before 2026.3.31 contains an authentication boundary vulnerability where Telegram legacy allowFrom migration incorrectly fans default-account trust into all named accounts. Attackers can exploit this trust propagation to bypass authentication controls and gain unauthorized access to named accounts. |
| A vulnerability was detected in Enter Software Iperius Backup up to 8.7.3. Affected is an unknown function of the file C:\ProgramData\IperiusBackup\Jobs\ of the component Backup Service. Performing a manipulation results in creation of temporary file with insecure permissions. The attack is only possible with local access. A high degree of complexity is needed for the attack. The exploitability is told to be difficult. The exploit is now public and may be used. Upgrading to version 8.7.4 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix differential encoding verification
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked. |
| In the Linux kernel, the following vulnerability has been resolved:
libie: don't unroll if fwlog isn't supported
The libie_fwlog_deinit() function can be called during driver unload
even when firmware logging was never properly initialized. This led to call
trace:
[ 148.576156] Oops: Oops: 0000 [#1] SMP NOPTI
[ 148.576167] CPU: 80 UID: 0 PID: 12843 Comm: rmmod Kdump: loaded Not tainted 6.17.0-rc7next-queue-3oct-01915-g06d79d51cf51 #1 PREEMPT(full)
[ 148.576177] Hardware name: HPE ProLiant DL385 Gen10 Plus/ProLiant DL385 Gen10 Plus, BIOS A42 07/18/2020
[ 148.576182] RIP: 0010:__dev_printk+0x16/0x70
[ 148.576196] Code: 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 55 41 54 49 89 d4 55 48 89 fd 53 48 85 f6 74 3c <4c> 8b 6e 50 48 89 f3 4d 85 ed 75 03 4c 8b 2e 48 89 df e8 f3 27 98
[ 148.576204] RSP: 0018:ffffd2fd7ea17a48 EFLAGS: 00010202
[ 148.576211] RAX: ffffd2fd7ea17aa0 RBX: ffff8eb288ae2000 RCX: 0000000000000000
[ 148.576217] RDX: ffffd2fd7ea17a70 RSI: 00000000000000c8 RDI: ffffffffb68d3d88
[ 148.576222] RBP: ffffffffb68d3d88 R08: 0000000000000000 R09: 0000000000000000
[ 148.576227] R10: 00000000000000c8 R11: ffff8eb2b1a49400 R12: ffffd2fd7ea17a70
[ 148.576231] R13: ffff8eb3141fb000 R14: ffffffffc1215b48 R15: ffffffffc1215bd8
[ 148.576236] FS: 00007f5666ba6740(0000) GS:ffff8eb2472b9000(0000) knlGS:0000000000000000
[ 148.576242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 148.576247] CR2: 0000000000000118 CR3: 000000011ad17000 CR4: 0000000000350ef0
[ 148.576252] Call Trace:
[ 148.576258] <TASK>
[ 148.576269] _dev_warn+0x7c/0x96
[ 148.576290] libie_fwlog_deinit+0x112/0x117 [libie_fwlog]
[ 148.576303] ixgbe_remove+0x63/0x290 [ixgbe]
[ 148.576342] pci_device_remove+0x42/0xb0
[ 148.576354] device_release_driver_internal+0x19c/0x200
[ 148.576365] driver_detach+0x48/0x90
[ 148.576372] bus_remove_driver+0x6d/0xf0
[ 148.576383] pci_unregister_driver+0x2e/0xb0
[ 148.576393] ixgbe_exit_module+0x1c/0xd50 [ixgbe]
[ 148.576430] __do_sys_delete_module.isra.0+0x1bc/0x2e0
[ 148.576446] do_syscall_64+0x7f/0x980
It can be reproduced by trying to unload ixgbe driver in recovery mode.
Fix that by checking if fwlog is supported before doing unroll. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2, when ast_coredumper writes its gdb init and output files to a directory that is world-writable (for example /tmp), an attacker with write permission(which is all users on a linux system) to that directory can cause root to execute arbitrary commands or overwrite arbitrary files by controlling the gdb init file and output paths. This issue has been patched in versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2. |
| In Splunk Enterprise versions below 10.2.1, 10.0.5, 9.4.10, and 9.3.11, and Splunk Cloud Platform versions below 10.4.2603.0, 10.3.2512.5, 10.2.2510.9, 10.1.2507.19, 10.0.2503.13, and 9.3.2411.127, a low-privileged user that does not hold the `admin` or `power` Splunk roles could potentially perform a Remote Code Execution (RCE) by uploading a malicious file to the `$SPLUNK_HOME/var/run/splunk/apptemp` directory due to improper handling and insufficient isolation of temporary files within the `apptemp` directory. |
| Use of insecure directory in Spring Data Geode snapshot import extracts archives into predictable, permissive directories under the system temp location. On shared hosts, a local user with basic privileges can access another user’s extracted snapshot contents, leading to unintended exposure of cache data. |
| An Insecure Temporary File vulnerability in openSUSE sdbootutil allows local users to pre-create a directory to achieve various effects like:
* gain access to possible private information found in /var/lib/pcrlock.d
* manipulate the data backed up in /tmp/pcrlock.d.bak, therefore violating the integrity of the data should it be restored.
* overwrite protected system files with data from /var/lib/pcrlock.d by placing symlinks to existing files in the directory tree in /tmp/pcrlock.d.bak.
This issue affects sdbootutil: from ? before 5880246d3a02642dc68f5c8cb474bf63cdb56bca. |
| An issue was addressed with improved handling of temporary files. This issue is fixed in macOS Tahoe 26.3. An app may be able to access user-sensitive data. |
| Gradle is a build automation tool, and its native-platform tool provides Java bindings for native APIs. On Unix-like systems, the system temporary directory can be created with open permissions that allow multiple users to create and delete files within it. This library initialization could be vulnerable to a local privilege escalation from an attacker quickly deleting and recreating files in the system temporary directory. Gradle builds that rely on versions of net.rubygrapefruit:native-platform prior to 0.22-milestone-28 could be vulnerable to a local privilege escalation from an attacker quickly deleting and recreating files in the system temporary directory.
In net.rubygrapefruit:native-platform prior to version 0.22-milestone-28, if the `Native.get(Class<>)` method was called, without calling `Native.init(File)` first, with a non-`null` argument used as working file path, then the library would initialize itself using the system temporary directory and NativeLibraryLocator.java lines 68 through 78. Version 0.22-milestone-28 has been released with changes that fix the problem. Initialization is now mandatory and no longer uses the system temporary directory, unless such a path is passed for initialization. The only workaround for affected versions is to make sure to do a proper initialization, using a location that is safe.
Gradle 8.12, only that exact version, had codepaths where the initialization of the underlying native integration library took a default path, relying on copying the binaries to the system temporary directory. Any execution of Gradle exposed this exploit. Users of Windows or modern versions of macOS are not vulnerable, nor are users of a Unix-like operating system with the "sticky" bit set or `noexec` on their system temporary directory vulnerable. This problem was fixed in Gradle 8.12.1. Gradle 8.13 release also upgrades to a version of the native library that no longer has that bug. Some workarounds are available. On Unix-like operating systems, ensure that the "sticky" bit is set. This only allows the original user (or root) to delete a file. Mounting `/tmp` as `noexec` will prevent Gradle 8.12 from starting. Those who are are unable to change the permissions of the system temporary directory can move the Java temporary directory by setting the System Property java.io.tmpdir. The new path needs to limit permissions to the build user only. |
| A potential elevated privilege issue has been reported with InstallShield built Standalone MSI setups having multiple InstallScript custom actions configured. All supported versions (InstallShield 2023 R2, InstallShield 2022 R2 and InstallShield 2021 R2) are affected by this issue. |
| A vulnerability was detected in Mihomo Party up to 1.8.1 on macOS. Affected is the function enableSysProxy of the file src/main/sys/sysproxy.ts of the component Socket Handler. The manipulation results in creation of temporary file with insecure permissions. The attack requires a local approach. This attack is characterized by high complexity. The exploitability is told to be difficult. The exploit is now public and may be used. |
| In Maxima through 5.47.0 before 51704c, the plotting facilities make use of predictable names under /tmp. Thus, the contents may be controlled by a local attacker who can create files in advance with these names. This affects, for example, plot2d. |
| A post-authentication absolute path traversal vulnerability in SonicOS management allows a remote attacker to read an arbitrary file. |
