| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix NULL event access and potential PEBS record loss
When intel_pmu_drain_pebs_icl() is called to drain PEBS records, the
perf_event_overflow() could be called to process the last PEBS record.
While perf_event_overflow() could trigger the interrupt throttle and
stop all events of the group, like what the below call-chain shows.
perf_event_overflow()
-> __perf_event_overflow()
->__perf_event_account_interrupt()
-> perf_event_throttle_group()
-> perf_event_throttle()
-> event->pmu->stop()
-> x86_pmu_stop()
The side effect of stopping the events is that all corresponding event
pointers in cpuc->events[] array are cleared to NULL.
Assume there are two PEBS events (event a and event b) in a group. When
intel_pmu_drain_pebs_icl() calls perf_event_overflow() to process the
last PEBS record of PEBS event a, interrupt throttle is triggered and
all pointers of event a and event b are cleared to NULL. Then
intel_pmu_drain_pebs_icl() tries to process the last PEBS record of
event b and encounters NULL pointer access.
To avoid this issue, move cpuc->events[] clearing from x86_pmu_stop()
to x86_pmu_del(). It's safe since cpuc->active_mask or
cpuc->pebs_enabled is always checked before access the event pointer
from cpuc->events[]. |
| In the Linux kernel, the following vulnerability has been resolved:
md: avoid repeated calls to del_gendisk
There is a uaf problem which is found by case 23rdev-lifetime:
Oops: general protection fault, probably for non-canonical address 0xdead000000000122
RIP: 0010:bdi_unregister+0x4b/0x170
Call Trace:
<TASK>
__del_gendisk+0x356/0x3e0
mddev_unlock+0x351/0x360
rdev_attr_store+0x217/0x280
kernfs_fop_write_iter+0x14a/0x210
vfs_write+0x29e/0x550
ksys_write+0x74/0xf0
do_syscall_64+0xbb/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff5250a177e
The sequence is:
1. rdev remove path gets reconfig_mutex
2. rdev remove path release reconfig_mutex in mddev_unlock
3. md stop calls do_md_stop and sets MD_DELETED
4. rdev remove path calls del_gendisk because MD_DELETED is set
5. md stop path release reconfig_mutex and calls del_gendisk again
So there is a race condition we should resolve. This patch adds a
flag MD_DO_DELETE to avoid the race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: defer config put in recv_work
There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and
NBD_CMD_RECONFIGURE:
nbd_genl_connect // conf_ref=2 (connect and recv_work A)
nbd_open // conf_ref=3
recv_work A done // conf_ref=2
NBD_CLEAR_SOCK // conf_ref=1
nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B)
close nbd // conf_ref=1
recv_work B
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Or only running NBD_CLEAR_SOCK:
nbd_genl_connect // conf_ref=2
nbd_open // conf_ref=3
NBD_CLEAR_SOCK // conf_ref=2
close nbd
nbd_release
config_put // conf_ref=1
recv_work
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Commit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying the
waiter") moved nbd_config_put() to run before waking up the waiter in
recv_work, in order to ensure that nbd_start_device_ioctl() would not
be woken up while nbd->task_recv was still uncleared.
However, in nbd_start_device_ioctl(), after being woken up it explicitly
calls flush_workqueue() to make sure all current works are finished.
Therefore, there is no need to move the config put ahead of the wakeup.
Move nbd_config_put() to the end of recv_work, so that the reference is
held for the whole lifetime of the worker thread. This makes sure the
config cannot be freed while recv_work is still running, even if clear
+ reconfigure interleave.
In addition, we don't need to worry about recv_work dropping the last
nbd_put (which causes deadlock):
path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=1 (trigger recv_work)
open nbd // nbd_refs=2
NBD_CLEAR_SOCK
close nbd
nbd_release
nbd_disconnect_and_put
flush_workqueue // recv_work done
nbd_config_put
nbd_put // nbd_refs=1
nbd_put // nbd_refs=0
queue_work
path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=2 (trigger recv_work)
open nbd // nbd_refs=3
NBD_CLEAR_SOCK // conf_refs=2
close nbd
nbd_release
nbd_config_put // conf_refs=1
nbd_put // nbd_refs=2
recv_work done // conf_refs=0, nbd_refs=1
rmmod // nbd_refs=0
Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put") |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: init run lock for extend inode
After setting the inode mode of $Extend to a regular file, executing the
truncate system call will enter the do_truncate() routine, causing the
run_lock uninitialized error reported by syzbot.
Prior to patch 4e8011ffec79, if the inode mode of $Extend was not set to
a regular file, the do_truncate() routine would not be entered.
Add the run_lock initialization when loading $Extend.
syzbot reported:
INFO: trying to register non-static key.
Call Trace:
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
assign_lock_key+0x133/0x150 kernel/locking/lockdep.c:984
register_lock_class+0x105/0x320 kernel/locking/lockdep.c:1299
__lock_acquire+0x99/0xd20 kernel/locking/lockdep.c:5112
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868
down_write+0x96/0x1f0 kernel/locking/rwsem.c:1590
ntfs_set_size+0x140/0x200 fs/ntfs3/inode.c:860
ntfs_extend+0x1d9/0x970 fs/ntfs3/file.c:387
ntfs_setattr+0x2e8/0xbe0 fs/ntfs3/file.c:808 |
| In the Linux kernel, the following vulnerability has been resolved:
md: init bioset in mddev_init
IO operations may be needed before md_run(), such as updating metadata
after writing sysfs. Without bioset, this triggers a NULL pointer
dereference as below:
BUG: kernel NULL pointer dereference, address: 0000000000000020
Call Trace:
md_update_sb+0x658/0xe00
new_level_store+0xc5/0x120
md_attr_store+0xc9/0x1e0
sysfs_kf_write+0x6f/0xa0
kernfs_fop_write_iter+0x141/0x2a0
vfs_write+0x1fc/0x5a0
ksys_write+0x79/0x180
__x64_sys_write+0x1d/0x30
x64_sys_call+0x2818/0x2880
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Reproducer
```
mdadm -CR /dev/md0 -l1 -n2 /dev/sd[cd]
echo inactive > /sys/block/md0/md/array_state
echo 10 > /sys/block/md0/md/new_level
```
mddev_init() can only be called once per mddev, no need to test if bioset
has been initialized anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: defer config unlock in nbd_genl_connect
There is one use-after-free warning when running NBD_CMD_CONNECT and
NBD_CLEAR_SOCK:
nbd_genl_connect
nbd_alloc_and_init_config // config_refs=1
nbd_start_device // config_refs=2
set NBD_RT_HAS_CONFIG_REF open nbd // config_refs=3
recv_work done // config_refs=2
NBD_CLEAR_SOCK // config_refs=1
close nbd // config_refs=0
refcount_inc -> uaf
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 24 PID: 1014 at lib/refcount.c:25 refcount_warn_saturate+0x12e/0x290
nbd_genl_connect+0x16d0/0x1ab0
genl_family_rcv_msg_doit+0x1f3/0x310
genl_rcv_msg+0x44a/0x790
The issue can be easily reproduced by adding a small delay before
refcount_inc(&nbd->config_refs) in nbd_genl_connect():
mutex_unlock(&nbd->config_lock);
if (!ret) {
set_bit(NBD_RT_HAS_CONFIG_REF, &config->runtime_flags);
+ printk("before sleep\n");
+ mdelay(5 * 1000);
+ printk("after sleep\n");
refcount_inc(&nbd->config_refs);
nbd_connect_reply(info, nbd->index);
} |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check skb->transport_header is set in bpf_skb_check_mtu
The bpf_skb_check_mtu helper needs to use skb->transport_header when
the BPF_MTU_CHK_SEGS flag is used:
bpf_skb_check_mtu(skb, ifindex, &mtu_len, 0, BPF_MTU_CHK_SEGS)
The transport_header is not always set. There is a WARN_ON_ONCE
report when CONFIG_DEBUG_NET is enabled + skb->gso_size is set +
bpf_prog_test_run is used:
WARNING: CPU: 1 PID: 2216 at ./include/linux/skbuff.h:3071
skb_gso_validate_network_len
bpf_skb_check_mtu
bpf_prog_3920e25740a41171_tc_chk_segs_flag # A test in the next patch
bpf_test_run
bpf_prog_test_run_skb
For a normal ingress skb (not test_run), skb_reset_transport_header
is performed but there is plan to avoid setting it as described in
commit 2170a1f09148 ("net: no longer reset transport_header in __netif_receive_skb_core()").
This patch fixes the bpf helper by checking
skb_transport_header_was_set(). The check is done just before
skb->transport_header is used, to avoid breaking the existing bpf prog.
The WARN_ON_ONCE is limited to bpf_prog_test_run, so targeting bpf-next. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: rtl8187: Fix potential buffer underflow in rtl8187_rx_cb()
The rtl8187_rx_cb() calculates the rx descriptor header address
by subtracting its size from the skb tail pointer.
However, it does not validate if the received packet
(skb->len from urb->actual_length) is large enough to contain this
header.
If a truncated packet is received, this will lead to a buffer
underflow, reading memory before the start of the skb data area,
and causing a kernel panic.
Add length checks for both rtl8187 and rtl8187b descriptor headers
before attempting to access them, dropping the packet cleanly if the
check fails. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: limit the level of fs stacking for file-backed mounts
Otherwise, it could cause potential kernel stack overflow (e.g., EROFS
mounting itself). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double free of qgroup record after failure to add delayed ref head
In the previous code it was possible to incur into a double kfree()
scenario when calling add_delayed_ref_head(). This could happen if the
record was reported to already exist in the
btrfs_qgroup_trace_extent_nolock() call, but then there was an error
later on add_delayed_ref_head(). In this case, since
add_delayed_ref_head() returned an error, the caller went to free the
record. Since add_delayed_ref_head() couldn't set this kfree'd pointer
to NULL, then kfree() would have acted on a non-NULL 'record' object
which was pointing to memory already freed by the callee.
The problem comes from the fact that the responsibility to kfree the
object is on both the caller and the callee at the same time. Hence, the
fix for this is to shift the ownership of the 'qrecord' object out of
the add_delayed_ref_head(). That is, we will never attempt to kfree()
the given object inside of this function, and will expect the caller to
act on the 'qrecord' object on its own. The only exception where the
'qrecord' object cannot be kfree'd is if it was inserted into the
tracing logic, for which we already have the 'qrecord_inserted_ret'
boolean to account for this. Hence, the caller has to kfree the object
only if add_delayed_ref_head() reports not to have inserted it on the
tracing logic.
As a side-effect of the above, we must guarantee that
'qrecord_inserted_ret' is properly initialized at the start of the
function, not at the end, and then set when an actual insert
happens. This way we avoid 'qrecord_inserted_ret' having an invalid
value on an early exit.
The documentation from the add_delayed_ref_head() has also been updated
to reflect on the exact ownership of the 'qrecord' object. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Prevent recursive memory reclaim
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043c2 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273. |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: mm: Move initrd phys_to_virt handling after paging_init()
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.
A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.
If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_event_output
We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.
The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.
This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:
BUG: kernel NULL pointer dereference, address: 0000000000000001
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
...
? perf_output_sample+0x12a/0x9a0
? finish_task_switch.isra.0+0x81/0x280
? perf_event_output+0x66/0xa0
? bpf_event_output+0x13a/0x190
? bpf_event_output_data+0x22/0x40
? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb
? xa_load+0x87/0xe0
? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0
? release_sock+0x3e/0x90
? sk_setsockopt+0x1a1/0x12f0
? udp_pre_connect+0x36/0x50
? inet_dgram_connect+0x93/0xa0
? __sys_connect+0xb4/0xe0
? udp_setsockopt+0x27/0x40
? __pfx_udp_push_pending_frames+0x10/0x10
? __sys_setsockopt+0xdf/0x1a0
? __x64_sys_connect+0xf/0x20
? do_syscall_64+0x3a/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixing this by disabling preemption in bpf_event_output.
[1] https://github.com/cilium/cilium/issues/26756 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Array index may go out of bound
Klocwork reports array 'vha->host_str' of size 16 may use index value(s)
16..19. Use snprintf() instead of sprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: remove BUG_ON()'s in add_new_free_space()
At add_new_free_space() we have these BUG_ON()'s that are there to deal
with any failure to add free space to the in memory free space cache.
Such failures are mostly -ENOMEM that should be very rare. However there's
no need to have these BUG_ON()'s, we can just return any error to the
caller and all callers and their upper call chain are already dealing with
errors.
So just make add_new_free_space() return any errors, while removing the
BUG_ON()'s, and returning the total amount of added free space to an
optional u64 pointer argument. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"
This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.
This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
Fix the below kernel panic due to null pointer access:
[ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048
[ 18.513464] Mem abort info:
[ 18.516346] ESR = 0x0000000096000005
[ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits
[ 18.525706] SET = 0, FnV = 0
[ 18.528878] EA = 0, S1PTW = 0
[ 18.532117] FSC = 0x05: level 1 translation fault
[ 18.537138] Data abort info:
[ 18.540110] ISV = 0, ISS = 0x00000005
[ 18.544060] CM = 0, WnR = 0
[ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000
[ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
**Snip**
[ 18.696758] Call trace:
[ 18.699278] adreno_gpu_cleanup+0x30/0x88
[ 18.703396] a6xx_destroy+0xc0/0x130
[ 18.707066] a6xx_gpu_init+0x308/0x424
[ 18.710921] adreno_bind+0x178/0x288
[ 18.714590] component_bind_all+0xe0/0x214
[ 18.718797] msm_drm_bind+0x1d4/0x614
[ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8
[ 18.728105] __component_add+0xa0/0x158
[ 18.732048] component_add+0x20/0x2c
[ 18.735719] adreno_probe+0x40/0xc0
[ 18.739300] platform_probe+0xb4/0xd4
[ 18.743068] really_probe+0xfc/0x284
[ 18.746738] __driver_probe_device+0xc0/0xec
[ 18.751129] driver_probe_device+0x48/0x110
[ 18.755421] __device_attach_driver+0xa8/0xd0
[ 18.759900] bus_for_each_drv+0x90/0xdc
[ 18.763843] __device_attach+0xfc/0x174
[ 18.767786] device_initial_probe+0x20/0x2c
[ 18.772090] bus_probe_device+0x40/0xa0
[ 18.776032] deferred_probe_work_func+0x94/0xd0
[ 18.780686] process_one_work+0x190/0x3d0
[ 18.784805] worker_thread+0x280/0x3d4
[ 18.788659] kthread+0x104/0x1c0
[ 18.791981] ret_from_fork+0x10/0x20
[ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516)
[ 18.801913] ---[ end trace 0000000000000000 ]---
[ 18.809039] Kernel panic - not syncing: Oops: Fatal exception
Patchwork: https://patchwork.freedesktop.org/patch/515605/ |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: always release netdev hooks from notifier
This reverts "netfilter: nf_tables: skip netdev events generated on netns removal".
The problem is that when a veth device is released, the veth release
callback will also queue the peer netns device for removal.
Its possible that the peer netns is also slated for removal. In this
case, the device memory is already released before the pre_exit hook of
the peer netns runs:
BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0
Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45
Workqueue: netns cleanup_net
Call Trace:
nf_hook_entry_head+0x1b8/0x1d0
__nf_unregister_net_hook+0x76/0x510
nft_netdev_unregister_hooks+0xa0/0x220
__nft_release_hook+0x184/0x490
nf_tables_pre_exit_net+0x12f/0x1b0
..
Order is:
1. First netns is released, veth_dellink() queues peer netns device
for removal
2. peer netns is queued for removal
3. peer netns device is released, unreg event is triggered
4. unreg event is ignored because netns is going down
5. pre_exit hook calls nft_netdev_unregister_hooks but device memory
might be free'd already. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ov5675: Fix memleak in ov5675_init_controls()
There is a kmemleak when testing the media/i2c/ov5675.c with bpf mock
device:
AssertionError: unreferenced object 0xffff888107362160 (size 16):
comm "python3", pid 277, jiffies 4294832798 (age 20.722s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000abe7d67c>] __kmalloc_node+0x44/0x1b0
[<000000008a725aac>] kvmalloc_node+0x34/0x180
[<000000009a53cd11>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
[<0000000055b46db0>] ov5675_probe+0x38b/0x897 [ov5675]
[<00000000153d886c>] i2c_device_probe+0x28d/0x680
[<000000004afb7e8f>] really_probe+0x17c/0x3f0
[<00000000ff2f18e4>] __driver_probe_device+0xe3/0x170
[<000000000a001029>] driver_probe_device+0x49/0x120
[<00000000e39743c7>] __device_attach_driver+0xf7/0x150
[<00000000d32fd070>] bus_for_each_drv+0x114/0x180
[<000000009083ac41>] __device_attach+0x1e5/0x2d0
[<0000000015b4a830>] bus_probe_device+0x126/0x140
[<000000007813deaf>] device_add+0x810/0x1130
[<000000007becb867>] i2c_new_client_device+0x386/0x540
[<000000007f9cf4b4>] of_i2c_register_device+0xf1/0x110
[<00000000ebfdd032>] of_i2c_notify+0xfc/0x1f0
ov5675_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak. |
