| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: bound interrupt-vector register fill to the allocated array
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks
There is theoretical UAF if the conn is freed while the hci_sync task
is running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size
The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58
bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing
64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512,
eight times the actual on-device size.
header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the
RAS capability iomap, overrunning the 88-byte mapping by 448 bytes.
The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE
(512) bytes from its source. For the CPER caller the source is
struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a
stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes
of kernel stack into the trace event ring buffer where userspace can
read it via tracefs.
Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it,
bringing all iomap readers into agreement on 16 dwords. Userspace tools
such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32)
header_log layout in the cxl_aer_uncorrectable_error trace event. Add
CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event
__array and its memcpy to preserve that ABI. Both callers now pass a
zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only
the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware;
the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring
buffer layout intact.
[ dj: Replaced 64 with SZ_64 per RichardC ] |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Fix race condition in event registration
The zynqmp_power driver registers handlers for suspend and subsystem
restart events using register_event(). However, the work structures
(zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by
these handlers were allocated and initialized after the registration
call.
This created a race window where, if the firmware triggered an event
immediately after registration but before allocation, the callback
(suspend_event_callback or subsystem_restart_event_callback) would
dereference a NULL pointer in work_pending(), leading to a crash.
Fix this by allocating and initializing the work structures before
registering the events. |
| Improper validation of array index vulnerability in Velneo vServer. This issue affects vServer: from 36.0 before 36.6 and from 37.0 before 37.2. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_refcount field as unique
BPF_REFCOUNT is not marked as a unique field, while it should be. Fix
this oversight. |
| Vulnerability in the Oracle Agile Product Lifecycle Management for Process product of Oracle Supply Chain (component: Product Quality Management). The supported version that is affected is 6.2.4. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Agile Product Lifecycle Management for Process. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Agile Product Lifecycle Management for Process, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Agile Product Lifecycle Management for Process accessible data as well as unauthorized access to critical data or complete access to all Oracle Agile Product Lifecycle Management for Process accessible data. CVSS 3.1 Base Score 9.3 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:N). |
| The Ettrick Escape Room Booking WordPress plugin before 1.3.1 does not verify a booking's payment status against the payment provider before marking it paid and confirmed, allowing unauthenticated attackers to mark bookings as paid without paying. |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that a user is authorized to read a gallery before rendering it, allowing authors to embed and expose other users' non-public gallery metadata to unauthenticated visitors. |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that a user holds the capability WordPress reserves for installing Envira Gallery WordPress plugin before 1.16.2 code before processing its setup-wizard Envira Gallery WordPress plugin before 1.16.2-installation request, and does not restrict the installation to its own curated list, allowing a Multisite subsite Administrator to install an arbitrary WordPress.org-published Envira Gallery WordPress plugin before 1.16.2 into the network-shared Envira Gallery WordPress plugin before 1.16.2 directory, a privilege Multisite reserves for the network Super Admin. |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that an image identifier added to a gallery refers to a media attachment the caller is permitted to view, allowing any user able to create and edit a gallery (Author and above by default) to disclose the title and excerpt of other users' private, draft, pending and trashed posts that WordPress would otherwise withhold from them. |
| The Envira Gallery WordPress plugin before 1.16.2 does not correctly check authorization on its gallery-conversion feature, verifying that the requester can edit an arbitrary post they name rather than that they are allowed to create the Envira Gallery WordPress plugin before 1.16.2's own gallery content, allowing users with contributor-level access to create and publish gallery posts that the Envira Gallery WordPress plugin before 1.16.2's settings otherwise withhold from them. |
| The Payment Gateway for Idram WordPress plugin before 2.1.6 does not verify the authenticity of incoming payment notifications, because the merchant credentials used to compute their checksum are empty by default, allowing unauthenticated attackers to forge a valid payment confirmation and mark arbitrary orders as paid, and to force arbitrary orders into a failed state regardless of the gateway's configuration. |
| The Booking Package WordPress plugin before 1.7.31 does not perform any authorization or validity check before resetting its premium subscription state, allowing unauthenticated attackers to disable the Booking Package WordPress plugin before 1.7.31's paid features. |
| A malicious SVG can trigger an integer overflow which in turn triggers a null-pointer dereference in VectorImage QML Type. |
| A flaw was found in pki-core. The v2 REST ACL filter selects a tie-breaking permission for colliding literal and wildcard ACL keys using lexicographic string comparison rather than specificity, causing a wildcard-mapped permission to override a more specific literal-mapped permission when both match. In the CA's profile-management REST API this allows a request to POST /v2/profiles/raw -- intended to require Administrator-level profiles.create permission -- to instead be authorized under the lower-privileged profiles.approve permission held by the default Certificate Manager Agents group. The highest threat from this vulnerability is to confidentiality and integrity of the certificate authority's issuance policy. |
| The Cart Abandonment Recovery for WooCommerce WordPress plugin before 2.2.0 does not verify the integrity of its cart-recovery token before acting on it and still accepts an unsigned legacy token format, allowing unauthenticated attackers who know a victim's cart session identifier to modify that victim's abandoned-cart record, for example unsubscribing them from recovery emails or applying an arbitrary coupon to their restored cart. |
| The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not perform any authorization check on a lead-export handler, allowing unauthenticated users to download every captured contact record (names, email addresses and phone numbers). |
| The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not sanitise sort parameters before using them in a SQL ORDER BY clause, allowing unauthenticated attackers to perform SQL injection attacks. |
