| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use kvzalloc to allocate struct dc
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
(cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575) |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx()
put_prev_task_scx() warns when a runnable task drops to a lower sched_class
without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have
kept it running. Core scheduling breaks that: a forced-idle SMT sibling
reschedules through the core_pick fast path in pick_next_task(), which skips
pick_task_scx() and thus balance_one(), so a runnable task can drop to idle
with ENQ_LAST unset.
Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core
scheduling forced the idle, while a match (or core scheduling off) still
catches a genuine missing-ENQ_LAST drop. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan()
If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks.
Use the existing error handling path to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation
Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint
memory access array and to comply with the FF-A spec instead of defaulting
to `sizeof(struct ffa_mem_region)`.
This requires moving `ffa_mem_region_additional_setup()` earlier in the setup
flow.
Also, add sanity checks to ensure the calculated descriptor offsets do not
exceed `max_fragsize`. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: extend conn_hash lookup critical sections
Using RCU-protected pointers outside the critical sections without
refcount is incorrect and may result to UAF.
Extend critical section to cover both hci_conn_hash lookup and use of
the returned conn.
Add surrounding rcu_read_lock() also when return value is not used, in
preparation for RCU lockdep requirement to hci_lookup_le_connect().
This avoids concurrent deletion of the conn before we are done
dereferencing it.
Also, make sure to hold hdev->lock when accessing hdev->accept_list. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix use-after-free on workqueue during remove
In pdsc_remove(), the workqueue is destroyed before pdsc_teardown()
is called. This ordering allows two paths to queue work on the
destroyed workqueue:
1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error
path in pdsc_devcmd_locked() queues health_work.
2. A NotifyQ event can trigger the ISR and queue work before free_irq()
is called in pdsc_teardown().
Fix by moving destroy_workqueue() after pdsc_teardown() so the
workqueue outlives every queuer; destroy_workqueue() then flushes any
work still pending.
Draining the queued work also requires ordering the teardown so the
resources that work touches are freed last:
- In pdsc_qcq_free(), after freeing the interrupt, cancel_work_sync()
the queue's work and only then clear qcq->intx, so
pdsc_process_adminq()'s read of qcq->intx for interrupt-credit
return cannot race with the clear.
- Free adminqcq before notifyqcq: the shared adminq ISR is released
when adminqcq is freed, and the adminq work accesses notifyqcq, so
both must be stopped before notifyqcq is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
ALU32 operations write a 32-bit result and leave the upper 32 bits of
the BPF register zero. The LoongArch JIT sign-extends the result of
signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient
or remainder leaves bits 63:32 set in JITted code while the verifier
and interpreter model those bits as zero.
Keep sign-extension on the operands, which signed divide needs, and
zero-extend the ALU32 result after the divide or modulo instruction,
matching the unsigned ALU32 div/mod paths and every other ALU32
operation in this JIT. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix max_vport related crash on allocation error during init
Set adapter->max_vports only after successful allocation of vports, netdevs
and vport_config buffers. This fixes possible crashes on reset or rmmod,
following failed allocation on init
[ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated
[ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 320.416918] #PF: supervisor read access in kernel mode
[ 320.416942] #PF: error_code(0x0000) - not-present page
[ 320.416963] PGD 2099657067 P4D 0
[ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI
...
[ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf]
[ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20
[ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246
[ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c
[ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000
[ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000
[ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20
[ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000
[ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0
[ 320.417385] PKRU: 55555554
[ 320.417398] Call Trace:
[ 320.417412] <TASK>
[ 320.417429] pci_device_remove+0x42/0xb0
[ 320.417459] device_release_driver_internal+0x1a9/0x210
[ 320.417492] driver_detach+0x4b/0x90
[ 320.417516] bus_remove_driver+0x70/0x100
[ 320.417539] pci_unregister_driver+0x2e/0xb0
[ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0
[ 320.417592] ? kmem_cache_free+0x31e/0x550
[ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190
[ 320.417644] ? do_syscall_64+0x38/0x6b0
[ 320.417665] do_syscall_64+0xc8/0x6b0
[ 320.417683] ? clear_bhb_loop+0x30/0x80
[ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 320.417727] RIP: 0033:0x7f963bb30beb |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32-dcmipp: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
dcmipp_bytecap_start_streaming() returned -EINVAL when the source
subdevice could not be resolved from the media graph, before
pm_runtime_resume_and_get() and media_pipeline_start() had been called.
The remaining error paths already converge on the err_buffer_done
label, which calls dcmipp_bytecap_all_buffers_done(...,
VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate
err_pm_put / err_media_pipeline_stop labels are skipped, which is
correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix kernel panic during driver load failure
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
(cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) |
| In the Linux kernel, the following vulnerability has been resolved:
zram: set default primary compressor in zram_destroy_comps()
Patch series "zram: fix zram issues reported by sashiko".
Sashiko drove by and reported [1] a couple of zram issues:
a possible BUG_ON() in zlib code due to missing winbits range
validation and one possible NULL-ptr dereference in zcomp.
Both are low risk yet still worth fixing.
This patch (of 2):
zram_destroy_comps() resets all compressors and leaves them set to NULL,
including the primary one, which is invalid device state, as now
comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set
default primary compressor in zram_destroy_comps(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths
nfsd_dispatch() sets rq_status_counter to an odd value once a request has
been decoded, and back to an even value once it has been fully processed,
forming a seq-lock like protocol with the lockless reader in
nfsd_nl_rpc_status_get_dumpit().
Only the fully successful path restored the counter to even. The cache-hit
(RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return
after the odd-valued store without ever bringing the counter back to even.
Once one of those paths is taken, rq_status_counter is left odd: the next
request's decode ORs in 1 (still odd) and only a subsequent successful
encode restores even. While stuck odd, the dumpit reader treats the rqstp
fields as stable and its retry check compares against the same unchanging
odd value, so it never detects concurrent mutation. This exposes actively
mutating fields (e.g. args->ops / args->opcnt during compound decode and
release) to the lockless reader, which can read past the end of the
8-element inline ops array.
Add a helper that advances the counter to the next even value and call it
on every return path that follows the odd-valued store. The decode-error
path is left untouched as it is reached before the counter is set odd. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr()
reparse_buf_ptr() reads buf->ReparseDataLength before checking that
count covers the full fixed header:
buf = (struct reparse_data_buffer *)((u8 *)io + off);
len = sizeof(*buf); /* 8 bytes */
rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */
if (count < len || count < rdlen + len) /* check comes after */
struct reparse_data_buffer has ReparseDataLength at offset 4. If a
server returns OutputCount < 6, the read at offset 4-5 reaches past
the end of the received data. The off+count bounds against iov_len
were already validated, but that does not protect against count being
smaller than sizeof(*buf).
Split the check: verify count >= sizeof(*buf) before reading
ReparseDataLength, then verify count covers the data region. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: universal-pidff: stop the device when force-feedback init fails
universal_pidff_probe() starts the device with hid_hw_start() and then, if
force-feedback initialisation fails, returns the error through a label that
only does "return error". The device is left started.
The HID core does not unwind on the driver's behalf. __hid_device_probe()
releases the devres group, closes the report and clears hdev->driver:
if (ret) {
devres_release_group(&hdev->dev, hdev->devres_group_id);
hid_close_report(hdev);
hdev->driver = NULL;
}
The hidraw character device that hid_hw_start() registered through
hid_connect() is allocated with kzalloc() and added with cdev_device_add(),
so it is not devres-managed and survives that. With hdev->driver NULL,
hid_device_remove() skips hid_hw_stop() as well, because it only unwinds
while a driver is still attached. The registration therefore outlives the
device on both paths.
Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports
a use-after-free write from hidraw_open() -> hid_hw_open() -> the
transport's open callback, which takes a spinlock inside the freed object.
A descriptor that carries a PID usage page and no input reports is enough:
hidraw claims the device so hid_hw_start() succeeds, while hid->inputs
stays empty so force-feedback init fails. The other failure returns in
hid_pidff_init_with_quirks() - no output reports, an allocation failure,
pidff_init_fields(), pidff_check_autocenter(), an unusable effect count,
input_ff_create() - all reach the same label.
Stop the device on that path. hid-dr.c and hid-emsff.c, which start the
device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do
this. The two earlier gotos must keep returning without hid_hw_stop(),
since neither has a started device, so give the path that fails after the
start its own label.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the policy. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: bound shrinker scans by examined checkpoint buffers
The jbd2 shrinker currently accounts only checkpoint buffers that it
successfully releases against nr_to_scan. Busy buffers therefore do not
consume the scan budget.
If a checkpoint transaction contains mostly busy buffers, the shrinker
can scan its entire checkpoint list while holding journal->j_list_lock.
Large checkpoint lists can result in excessive lock hold times and leave
other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls.
Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for
every buffer examined, including busy buffers. Pass NULL from checkpoint
cleanup paths so their existing full-list behavior is preserved.
This restores the scan-budget semantics that existed before
journal_shrink_one_cp_list() was changed to always scan a complete
checkpoint list. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: check need_resched() when skipping busy checkpoint buffers
journal_shrink_one_cp_list() skips busy checkpoint buffers when called
with JBD2_SHRINK_BUSY_SKIP. The continue statement on this path also
skips the need_resched() check at the end of the loop body.
Consequently, when a checkpoint list contains mostly busy buffers, the
shrinker can walk the entire list while holding journal->j_list_lock,
even when a reschedule has been requested. Large checkpoint lists under
memory pressure can therefore cause long lock hold times and leave other
CPUs spinning on j_list_lock, resulting in soft lockups or RCU stalls.
Route the busy-buffer path through the need_resched() check so that the
shrinker can release j_list_lock and reschedule promptly, restoring
parity with the clean-buffer path, which already checks need_resched().
This does not change which checkpoint buffers are eligible for removal. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails
When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE,
it creates a replacement listener cm_id and returns 1, telling
the CM core to destroy the old one. If the replacement allocation
fails, sc_cm_id still points at the old cm_id that the CM core is
about to destroy. Any subsequent dereference of sc_cm_id --
such as svc_rdma_detach()'s rdma_disconnect() call -- is a
use-after-free.
NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s
rdma_disconnect() call against NULL so that the listener can
be torn down safely when the server shuts down. |
