| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fail bpf_timer_cancel when callback is being cancelled
Given a schedule:
timer1 cb timer2 cb
bpf_timer_cancel(timer2); bpf_timer_cancel(timer1);
Both bpf_timer_cancel calls would wait for the other callback to finish
executing, introducing a lockup.
Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps
track of all in-flight cancellation requests for a given BPF timer.
Whenever cancelling a BPF timer, we must check if we have outstanding
cancellation requests, and if so, we must fail the operation with an
error (-EDEADLK) since cancellation is synchronous and waits for the
callback to finish executing. This implies that we can enter a deadlock
situation involving two or more timer callbacks executing in parallel
and attempting to cancel one another.
Note that we avoid incrementing the cancelling counter for the target
timer (the one being cancelled) if bpf_timer_cancel is not invoked from
a callback, to avoid spurious errors. The whole point of detecting
cur->cancelling and returning -EDEADLK is to not enter a busy wait loop
(which may or may not lead to a lockup). This does not apply in case the
caller is in a non-callback context, the other side can continue to
cancel as it sees fit without running into errors.
Background on prior attempts:
Earlier versions of this patch used a bool 'cancelling' bit and used the
following pattern under timer->lock to publish cancellation status.
lock(t->lock);
t->cancelling = true;
mb();
if (cur->cancelling)
return -EDEADLK;
unlock(t->lock);
hrtimer_cancel(t->timer);
t->cancelling = false;
The store outside the critical section could overwrite a parallel
requests t->cancelling assignment to true, to ensure the parallely
executing callback observes its cancellation status.
It would be necessary to clear this cancelling bit once hrtimer_cancel
is done, but lack of serialization introduced races. Another option was
explored where bpf_timer_start would clear the bit when (re)starting the
timer under timer->lock. This would ensure serialized access to the
cancelling bit, but may allow it to be cleared before in-flight
hrtimer_cancel has finished executing, such that lockups can occur
again.
Thus, we choose an atomic counter to keep track of all outstanding
cancellation requests and use it to prevent lockups in case callbacks
attempt to cancel each other while executing in parallel. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Use kfree_sensitive() to fix Coccinelle warnings
Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle:
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506)
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643)
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770) |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
When del_timer_sync() is called in an interrupt context it throws a warning
because of potential deadlock. The timer is used only to exit from
wait_for_completion() after a timeout so replacing the call with
wait_for_completion_timeout() allows to remove the problematic timer and
its related functions altogether. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/lima: fix shared irq handling on driver remove
lima uses a shared interrupt, so the interrupt handlers must be prepared
to be called at any time. At driver removal time, the clocks are
disabled early and the interrupts stay registered until the very end of
the remove process due to the devm usage.
This is potentially a bug as the interrupts access device registers
which assumes clocks are enabled. A crash can be triggered by removing
the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled.
This patch frees the interrupts at each lima device finishing callback
so that the handlers are already unregistered by the time we fully
disable clocks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values
syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM
to 2^31.
We had a similar issue in sch_fq, fixed with commit
d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM")
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24]
Modules linked in:
irq event stamp: 131135
hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline]
hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95
hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline]
softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553
softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19
CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: mld mld_ifc_work
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __list_del include/linux/list.h:195 [inline]
pc : __list_del_entry include/linux/list.h:218 [inline]
pc : list_move_tail include/linux/list.h:310 [inline]
pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline]
pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854
lr : __list_del_entry include/linux/list.h:218 [inline]
lr : list_move_tail include/linux/list.h:310 [inline]
lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline]
lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854
sp : ffff800093d36700
x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000
x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0
x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0
x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0
x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8
x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc
x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470
Call trace:
__list_del include/linux/list.h:195 [inline]
__list_del_entry include/linux/list.h:218 [inline]
list_move_tail include/linux/list.h:310 [inline]
fq_tin_dequeue include/net/fq_impl.h:112 [inline]
ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854
wake_tx_push_queue net/mac80211/util.c:294 [inline]
ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315
drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline]
schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline]
ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664
ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966
ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062
__ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338
ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547
__dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563
neigh_output include/net/neighbour.h:542 [inline]
ip6_fini
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix adding block group to a reclaim list and the unused list during reclaim
There is a potential parallel list adding for retrying in
btrfs_reclaim_bgs_work and adding to the unused list. Since the block
group is removed from the reclaim list and it is on a relocation work,
it can be added into the unused list in parallel. When that happens,
adding it to the reclaim list will corrupt the list head and trigger
list corruption like below.
Fix it by taking fs_info->unused_bgs_lock.
[177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104
[177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0)
[177.529][T2585409] ------------[ cut here ]------------
[177.537][T2585409] kernel BUG at lib/list_debug.c:65!
[177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1
[177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022
[177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs]
[177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72
[177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286
[177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000
[177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40
[177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08
[177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0
[177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000
[177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000
[177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0
[177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000
[177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400
[177.742][T2585409] PKRU: 55555554
[177.748][T2585409] Call Trace:
[177.753][T2585409] <TASK>
[177.759][T2585409] ? __die_body.cold+0x19/0x27
[177.766][T2585409] ? die+0x2e/0x50
[177.772][T2585409] ? do_trap+0x1ea/0x2d0
[177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.788][T2585409] ? do_error_trap+0xa3/0x160
[177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.805][T2585409] ? handle_invalid_op+0x2c/0x40
[177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.820][T2585409] ? exc_invalid_op+0x2d/0x40
[177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20
[177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs]
There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is
safe, AFAICS. Since the block group was in the unused list, the used bytes
should be 0 when it was added to the unused list. Then, it checks
block_group->{used,reserved,pinned} are still 0 under the
block_group->lock. So, they should be still eligible for the unused list,
not the reclaim list.
The reason it is safe there it's because because we're holding
space_info->groups_sem in write mode.
That means no other task can allocate from the block group, so while we
are at deleted_unused_bgs() it's not possible for other tasks to
allocate and deallocate extents from the block group, so it can't be
added to the unused list or the reclaim list by anyone else.
The bug can be reproduced by btrfs/166 after a few rounds. In practice
this can be hit when relocation cannot find more chunk space and ends
with ENOSPC. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER
In create_pinctrl(), pinctrl_maps_mutex is acquired before calling
add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl()
calls pinctrl_free(). However, pinctrl_free() attempts to acquire
pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to
a potential deadlock.
This patch resolves the issue by releasing pinctrl_maps_mutex before
calling pinctrl_free(), preventing the deadlock.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock
When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system
to enter suspend status with below command:
echo mem > /sys/power/state
There will be a deadlock issue occurring. Detailed invoking path as
below:
dwc3_suspend_common()
spin_lock_irqsave(&dwc->lock, flags); <-- 1st
dwc3_gadget_suspend(dwc);
dwc3_gadget_soft_disconnect(dwc);
spin_lock_irqsave(&dwc->lock, flags); <-- 2nd
This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget: Fix
NULL pointer dereference in dwc3_gadget_suspend") that removes the code
of checking whether dwc->gadget_driver is NULL or not. It causes the
following code is executed and deadlock occurs when trying to get the
spinlock. In fact, the root cause is the commit 5265397f9442("usb: dwc3:
Remove DWC3 locking during gadget suspend/resume") that forgot to remove
the lock of otg mode. So, remove the redundant lock of otg mode during
gadget suspend/resume. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: initialise nfsd_info.mutex early.
nfsd_info.mutex can be dereferenced by svc_pool_stats_start()
immediately after the new netns is created. Currently this can
trigger an oops.
Move the initialisation earlier before it can possibly be dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix possible deadlock in io_register_iowq_max_workers()
The io_register_iowq_max_workers() function calls io_put_sq_data(),
which acquires the sqd->lock without releasing the uring_lock.
Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock
before acquiring sqd->lock"), this can lead to a potential deadlock
situation.
To resolve this issue, the uring_lock is released before calling
io_put_sq_data(), and then it is re-acquired after the function call.
This change ensures that the locks are acquired in the correct
order, preventing the possibility of a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: cancel all works upon hci_unregister_dev()
syzbot is reporting that calling hci_release_dev() from hci_error_reset()
due to hci_dev_put() from hci_error_reset() can cause deadlock at
destroy_workqueue(), for hci_error_reset() is called from
hdev->req_workqueue which destroy_workqueue() needs to flush.
We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are
queued into hdev->workqueue and hdev->{power_on,error_reset} which are
queued into hdev->req_workqueue are no longer running by the moment
destroy_workqueue(hdev->workqueue);
destroy_workqueue(hdev->req_workqueue);
are called from hci_release_dev().
Call cancel_work_sync() on these work items from hci_unregister_dev()
as soon as hdev->list is removed from hci_dev_list. |
| In the Linux kernel, the following vulnerability has been resolved:
filelock: Fix fcntl/close race recovery compat path
When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when
fcntl/close race is detected"), I missed that there are two copies of the
code I was patching: The normal version, and the version for 64-bit offsets
on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable
backport...
Apply exactly the same fix to the compat path for 32-bit kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bypass empty buckets in batadv_purge_orig_ref()
Many syzbot reports are pointing to soft lockups in
batadv_purge_orig_ref() [1]
Root cause is unknown, but we can avoid spending too much
time there and perhaps get more interesting reports.
[1]
watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621]
Modules linked in:
irq event stamp: 6182794
hardirqs last enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386
hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline]
softirqs last enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287
softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline]
softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271
CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_purge_orig
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline]
pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388
lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386
sp : ffff800099007970
x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000
x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001
x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4
x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0
x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001
x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003
x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000
Call trace:
__daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline]
arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline]
__local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287
batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300
process_one_work+0x694/0x1204 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x938/0xef4 kernel/workqueue.c:2787
kthread+0x288/0x310 kernel/kthread.c:388
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51
lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103
sp : ffff800093a17d30
x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4
x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002
x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000
x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396
x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921s: fix potential hung tasks during chip recovery
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: do not create EA inode under buffer lock
ext4_xattr_set_entry() creates new EA inodes while holding buffer lock
on the external xattr block. This is problematic as it nests all the
allocation locking (which acquires locks on other buffers) under the
buffer lock. This can even deadlock when the filesystem is corrupted and
e.g. quota file is setup to contain xattr block as data block. Move the
allocation of EA inode out of ext4_xattr_set_entry() into the callers. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: don't set RO when shutting down f2fs
Shutdown does not check the error of thaw_super due to readonly, which
causes a deadlock like below.
f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread
- bdev_freeze
- freeze_super
- f2fs_stop_checkpoint()
- f2fs_handle_critical_error - sb_start_write
- set RO - waiting
- bdev_thaw
- thaw_super_locked
- return -EINVAL, if sb_rdonly()
- f2fs_stop_discard_thread
-> wait for kthread_stop(discard_thread); |
| In the Linux kernel, the following vulnerability has been resolved:
serial: imx: Introduce timeout when waiting on transmitter empty
By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential
deadlock.
In case of the timeout, there is not much we can do, so we simply ignore
the transmitter state and optimistically try to continue. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: lpi2c: Avoid calling clk_get_rate during transfer
Instead of repeatedly calling clk_get_rate for each transfer, lock
the clock rate and cache the value.
A deadlock has been observed while adding tlv320aic32x4 audio codec to
the system. When this clock provider adds its clock, the clk mutex is
locked already, it needs to access i2c, which in return needs the mutex
for clk_get_rate as well. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't attempt to schedule hpd_work on headless cards
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix request.queuelist usage in flush
Friedrich Weber reported a kernel crash problem and bisected to commit
81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine").
The root cause is that we use "list_move_tail(&rq->queuelist, pending)"
in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since
it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch().
We don't initialize its queuelist just for this first request, although
the queuelist of all later popped requests will be initialized.
Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so
rq->queuelist doesn't need to be initialized. It should be ok since rq
can't be on any list when PREFLUSH or POSTFLUSH, has no move actually.
Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in
flush state machine") also has another requirement that no drivers would
touch rq->queuelist after blk_mq_end_request() since we will reuse it to
add rq to the post-flush pending list in POSTFLUSH. If this is not true,
we will have to revert that commit IMHO.
This updated version adds "list_del_init(&rq->queuelist)" in flush rq
callback since the dm layer may submit request of a weird invalid format
(REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add
if without this "list_del_init(&rq->queuelist)". The weird invalid format
problem should be fixed in dm layer. |
