Search

Search Results (417953 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-91343 1 Oracle 1 Outside In Technology 2026-10-21 8.6 High
Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Clean Content SDK). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. While the vulnerability is in Oracle Outside In Technology, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Outside In Technology accessible data. CVSS 3.1 Base Score 8.6 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:H/A:N).
CVE-2026-83879 1 Microsoft 27 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 24 more 2026-10-21 7 High
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Overlay Filter allows an authorized attacker to elevate privileges locally.
CVE-2026-83881 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-21 7.8 High
Heap-based buffer overflow in Windows exFAT File System allows an authorized attacker to elevate privileges locally.
CVE-2026-83883 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-21 7.8 High
Use after free in Windows Win32K allows an authorized attacker to elevate privileges locally.
CVE-2026-98796 1 Linux 1 Linux Kernel 2026-10-21 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: allocate dummy netdev sooner The RX rings and the shared NAPI are carried by an internal "dummy" netdev (eth->dummy_dev). mtk_probe() creates that dummy device, and adds the shared tx/rx NAPI to it, only after the MAC netdevs have been registered. That order has been there since the MT7623 support was added and leaves a window in which the netdevs are visible to the network core before the shared NAPI and the dummy device exist. If anything brings the first netdev up during that window (e.g. netifd opening the WAN link the instant the interface is registered), the first-open path runs without them. On NETSYS v2 and later SoCs mtk_rx_alloc() -> __xdp_rxq_info_reg() then dereferences eth->dummy_dev == NULL: WARNING: CPU: ... Missing net_device from driver in net/core/xdp.c and mtk_open() fails with -ENODEV. On NETSYS v1 SoCs (MT7621/MT7622/MT7623/MT7629) there is no page pool, so the same open instead calls napi_enable() on a napi_struct that netif_napi_add() has not initialised yet and dereferences a NULL napi->dev. Allocate the dummy netdev and add the shared tx/rx NAPI to it before the register_netdev() loop. Both the dummy-allocation failure and a register_netdev() failure now unwind through mtk_unreg_dev(), which unregisters the net_device notifiers and the netdevs registered so far, stopping a concurrently-opened netdev (ndo_stop) and its NAPI before the dummy carrier is freed. A netdev that opened during the window can also have queued the frame-engine reset worker (via the tx watchdog or phylink), so the probe error path now cancels eth->pending_work before freeing the shared state, as mtk_cleanup() already does on remove.
CVE-2026-98782 1 Linux 1 Linux Kernel 2026-10-21 2.3 Low
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix ovl adaptor platform device leak mtk_drm_probe() creates an OVL adaptor platform device with platform_device_register_data() when the display pipeline requires the OVL adaptor. If a later initialization step fails, the probe error path releases the DRM resources without unregistering the already registered OVL adaptor device. The normal remove path likewise leaves the device registered after the DRM driver is unbound. Keep track of whether the OVL adaptor was successfully registered and unregister it on probe failure. Also recover the platform device from the stored DDP component device and unregister it during normal removal. The issue was identified by a static analysis tool I developed and confirmed by manual review.
CVE-2026-98781 1 Linux 1 Linux Kernel 2026-10-21 2.3 Low
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix pdev reference leak in mtk_drm_bind() When the device is not the mmsys master, mtk_drm_bind() returns early after taking a reference on the disp-mutex device via of_find_device_by_node(), without ever dropping it: mtk_drm_unbind() only puts mutex_dev for the master. Drop the reference before returning from the non-master path.
CVE-2026-98743 1 Linux 1 Linux Kernel 2026-10-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rt1017-sdca-sdw: fix uninitialized stream_config->type stream_config is not initialized before being passed to sdw_stream_add_slave(). The type field may contain garbage and is later copied to stream->type by sdw_config_stream(). Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. While at it, use snd_sdw_params_to_config() helper instead of open-coding the same logic.
CVE-2026-98734 1 Linux 1 Linux Kernel 2026-10-21 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent() or while dequeuing packets and updating conn->sent. KASAN reported: BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840 Workqueue: hci0 hci_tx_work Call Trace: hci_low_sent+0x730/0x840 hci_sched_iso+0x25e/0x4d0 hci_tx_work+0x239/0xcb0 Allocated by task 93: __hci_conn_add+0x16f/0x1b40 hci_bind_bis+0x782/0x17b0 hci_connect_bis+0xa0/0x510 iso_sock_connect+0x589/0x1050 Freed by task 88: kfree+0x131/0x3c0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x55a/0xe80 hci_disconnect_sync+0x156/0x180 hci_abort_conn_sync+0x3e7/0x940 hci_cmd_sync_work+0x13c/0x290 Hold hci_dev_lock() across connection selection and transmission in both SCO and ISO scheduling, serializing them with connection teardown. This also prevents queuing completion timestamps after the connection queues have been purged. Extending RCU across transmission would be unsafe because the transmit path can sleep. Keep the ISO timeout check outside the mutex since hci_link_tx_to() takes it itself. The preceding channel fix already holds this mutex in the ACL and LE schedulers, which call the SCO scheduler between packets. Move the SCO body to __hci_sched_sco(), assert that its caller holds the mutex, and use it directly from these locked paths. Keep a locking hci_sched_sco() wrapper for the direct calls from hci_tx_work(). This avoids recursively acquiring the device mutex while preserving the scheduling order. Remove the obsolete claim that connection removal disables TX.
CVE-2026-98717 1 Linux 1 Linux Kernel 2026-10-21 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadow page tables, immediately terminate the walk if the root is a "dummy" root, i.e. a root whose top-level page table is backed by the zero page, but otherwise doesn't exist. If memslot creation races with a stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align, KVM will attempt to walk shadow page tables using the zero page and hit a NULL pointer deref. BUG: kernel NULL pointer dereference, address: 0000000000000021 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm] Call Trace: <TASK> kvm_mmu_invalidate_addr+0x92/0xe0 [kvm] __kvm_inject_emulated_page_fault+0x67/0x80 [kvm] ept_page_fault+0x160/0x850 [kvm] kvm_mmu_do_page_fault+0x102/0x1f0 [kvm] kvm_mmu_page_fault+0x8e/0x6b0 [kvm] vmx_handle_exit+0x163/0x640 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x960/0x2120 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f606d0b53bb Opportunistically harden the shadow walks against fully invalid roots, but WARN, as all callers are expected/required to pre-check for a valid root. Don't WARN in the dummy root case as the whole point of using a dummy root is to provide a root that's valid enough to enter the guest, i.e. it should Just Work for all flows except those that *need* to know about dummy roots. Alternatively, KVM could allocate a dedicated page and associated shadow page structure for the dummy root, which is very tempting as it such an approach should be more resilient against unexpected behavior. But that would be a much larger and thus riskier change than simply terminating walks of dummy roots.
CVE-2026-98699 1 Linux 1 Linux Kernel 2026-10-21 5.3 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix mesh fast xmit path deletion UAF mesh_fast_tx_cache() stores raw mesh_path pointers. Path deletion flushes the cache and then frees the path with kfree_rcu(), but a lookup that already holds the path can insert a new cache entry after the flush. The cache then points at freed memory. Set MESH_PATH_DELETED before flushing, and skip inserting a cache entry if the path or MPP path is already deleted. Check this under the cache walk lock so it is ordered with the flush. Use WRITE_ONCE() for the deletion flag updates because the cache check reads flags without taking state_lock.
CVE-2026-98665 1 Linux 1 Linux Kernel 2026-10-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: iio: health: max30102: fix NULL dereference in interrupt handler The interrupt is requested in max30102_probe() and stays enabled for the lifetime of the device, but indio_dev->active_scan_mask is only valid while a buffer is enabled. When an interrupt arrives while no buffer is enabled, the handler dereferences the NULL active_scan_mask: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __bitmap_weight+0x64/0x98 (P) max30102_interrupt_handler+0x48/0x160 [max30102] Call max30102_fifo_count() at the top of the handler and return early unless it reports a FIFO sample is ready. Because FIFO_RDY is the only interrupt source enabled in max30102_chip_init(), an invocation of max30102_interrupt_handler() without the FIFO_RDY interrupt status bit set carries no data to read and can return before touching active_scan_mask. A negative return from max30102_fifo_count() indicates a failed interrupt status read and is treated the same way.
CVE-2026-83888 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-21 6.5 Medium
Buffer over-read in Windows CD-ROM Driver allows an unauthorized attacker to elevate privileges over a network.
CVE-2026-83893 1 Microsoft 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more 2026-10-21 5.5 Medium
Exposure of sensitive system information to an unauthorized control sphere in Windows Clipboard User Service allows an authorized attacker to disclose information locally.
CVE-2026-83895 1 Microsoft 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more 2026-10-21 6.8 Medium
Heap-based buffer overflow in Windows Win32 Kernel Subsystem allows an unauthorized attacker to elevate privileges with a physical attack.
CVE-2026-83899 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-21 7 High
Improper privilege management in Windows Installer allows an authorized attacker to elevate privileges locally.
CVE-2026-83900 1 Microsoft 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more 2026-10-21 7 High
Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally.
CVE-2026-91628 1 Oracle 1 Communications Billing And Revenue Management 2026-10-21 5.5 Medium
Vulnerability in the Oracle Communications Billing and Revenue Management product of Oracle Communications (component: BRM Server). Supported versions that are affected are 15.0.0.0.0, 15.0.1.0.0, 15.1.0.0.0 and 15.2.0.0.0. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Communications Billing and Revenue Management executes to compromise Oracle Communications Billing and Revenue Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Communications Billing and Revenue Management accessible data. CVSS 3.1 Base Score 5.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N).
CVE-2026-98859 1 Linux 1 Linux Kernel 2026-10-21 5.3 Medium
In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: stop the release timer from being rearmed on remove mt_remove() quiesces the sticky-finger timer before stopping the hardware: timer_delete_sync(&td->release_timer); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); timer_delete_sync() waits for a running callback and dequeues the timer, but it does not stop the timer from being armed again. The transport is still delivering reports at that point, and the report path rearms it: if (app->quirks & MT_QUIRK_STICKY_FINGERS) { if (td->mt_io_flags & MT_IO_SLOTS_MASK) mod_timer(&td->release_timer, jiffies + msecs_to_jiffies(100)); A report that arrives after timer_delete_sync() has returned therefore leaves the timer queued. td is allocated with devm_kzalloc() against hdev->dev, so it is freed when the driver is unbound, after mt_remove() returns. When the timer fires afterwards, mt_expired_timeout() dereferences the freed td: struct mt_device *td = timer_container_of(td, t, release_timer); struct hid_device *hdev = td->hdev; if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags)) Simply moving the teardown after hid_hw_stop() does not fix this on its own, because mt_expired_timeout() calls mt_release_contacts(), which walks hdev->inputs; the timer still has to be quiesced before hid_hw_stop() tears the input devices down. Use timer_shutdown_sync() instead, which additionally makes any later mod_timer() a no-op, so neither ordering constraint has to be traded off against the other. This is the final-teardown pattern the function was introduced for, and hid-wiimote already uses it for the same reason.
CVE-2026-98738 1 Linux 1 Linux Kernel 2026-10-21 5.1 Medium
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b0 smp_recv_cb+0x459f/0x8110 l2cap_recv_frame+0xf14/0x9190 l2cap_recv_acldata+0xa64/0xd40 hci_rx_work+0x4ca/0x730 Allocated by task 87: hci_add_remote_oob_data+0x11d/0x530 add_remote_oob_data+0x282/0x400 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 93: hci_remote_oob_data_clear+0x108/0x1c0 remove_remote_oob_data+0x198/0x220 hci_sock_sendmsg+0x1033/0x1ea0 Taking hdev->lock in build_pairing_cmd() would recurse for callers that already hold it and invert the device-to-L2CAP lock order on the receive path. Add a per-device remote_oob_lock instead, held across the SMP lookup and copies and by the add, remove and clear helpers. Cover initialization and in-place updates as well, so SMP cannot read partially initialized or updated OOB values. Release the mutex on allocation failure, preserving the existing error return. The new critical sections acquire no device, connection or channel locks. Writers retain their existing hdev->lock protection, which continues to serialize the other readers without changing their locking or behavior.