| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method()
is not freed after the call, so it leads to memory leak.
The method results in ACPI buffer is not used, so just pass NULL to
wmi_evaluate_method() which fixes the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
If mcb_device_register() returns error in chameleon_parse_gdd(), the refcount
of bus and device name are leaked. Fix this by calling put_device() to give up
the reference, so they can be released in mcb_release_dev() and kobject_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Check return value after calling platform_get_resource()
platform_get_resource() may return NULL pointer, we need check its
return value to avoid null-ptr-deref in resource_size(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
The fsl_pamu_probe() returns directly when create_csd() failed, leaving
irq and memories unreleased.
Fix by jumping to error if create_csd() returns error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: fix memory corruption with too many bridges
Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.
Patchwork: https://patchwork.freedesktop.org/patch/502664/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix size validation for non-exclusive domains (v4)
Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the
requested memory exists, else we get a kernel oops when dereferencing "man".
v2: Make the patch standalone, i.e. not dependent on local patches.
v3: Preserve old behaviour and just check that the manager pointer is not
NULL.
v4: Complain if GTT domain requested and it is uninitialized--most likely a
bug. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix memory leakage
This patch fixes potential memory leakage and seg fault
in _gpuvm_import_dmabuf() function |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: fix a double free in snd_ac97_controller_register()
If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ena: fix missing lock when update devlink params
Fix assert lock warning while calling devl_param_driverinit_value_set()
in ena.
WARNING: net/devlink/core.c:261 at devl_assert_locked+0x62/0x90, CPU#0: kworker/0:0/9
CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.19.0-rc2+ #1 PREEMPT(lazy)
Hardware name: Amazon EC2 m8i-flex.4xlarge/, BIOS 1.0 10/16/2017
Workqueue: events work_for_cpu_fn
RIP: 0010:devl_assert_locked+0x62/0x90
Call Trace:
<TASK>
devl_param_driverinit_value_set+0x15/0x1c0
ena_devlink_alloc+0x18c/0x220 [ena]
? __pfx_ena_devlink_alloc+0x10/0x10 [ena]
? trace_hardirqs_on+0x18/0x140
? lockdep_hardirqs_on+0x8c/0x130
? __raw_spin_unlock_irqrestore+0x5d/0x80
? __raw_spin_unlock_irqrestore+0x46/0x80
? devm_ioremap_wc+0x9a/0xd0
ena_probe+0x4d2/0x1b20 [ena]
? __lock_acquire+0x56a/0xbd0
? __pfx_ena_probe+0x10/0x10 [ena]
? local_clock+0x15/0x30
? __lock_release.isra.0+0x1c9/0x340
? mark_held_locks+0x40/0x70
? lockdep_hardirqs_on_prepare.part.0+0x92/0x170
? trace_hardirqs_on+0x18/0x140
? lockdep_hardirqs_on+0x8c/0x130
? __raw_spin_unlock_irqrestore+0x5d/0x80
? __raw_spin_unlock_irqrestore+0x46/0x80
? __pfx_ena_probe+0x10/0x10 [ena]
......
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix aux device unplugging when rdma is not supported by vport
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: fix typo in frequency notification
The NAN notification is for 5745 MHz which corresponds to channel 149
and not 5475 which is not actually a valid channel. This could result in
a NULL pointer dereference in cfg80211_next_nan_dw_notif. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL pointer dereference in do_abort_log_replay()
Coverity reported a NULL pointer dereference issue (CID 1666756) in
do_abort_log_replay(). When btrfs_alloc_path() fails in
replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay()
calls do_abort_log_replay() which unconditionally dereferences
wc->subvol_path when attempting to print debug information. Fix this by
adding a NULL check before dereferencing wc->subvol_path in
do_abort_log_replay(). |
| In the Linux kernel, the following vulnerability has been resolved:
udp: call skb_orphan() before skb_attempt_defer_free()
Standard UDP receive path does not use skb->destructor.
But skmsg layer does use it, since it calls skb_set_owner_sk_safe()
from udp_read_skb().
This then triggers this warning in skb_attempt_defer_free():
DEBUG_NET_WARN_ON_ONCE(skb->destructor);
We must call skb_orphan() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: fix device mismatch in devm_kzalloc/devm_kfree
Initial rss_hdr allocation uses virtio_device->device,
but virtnet_set_queues() frees using net_device->device.
This device mismatch causing below devres warning
[ 3788.514041] ------------[ cut here ]------------
[ 3788.514044] WARNING: drivers/base/devres.c:1095 at devm_kfree+0x84/0x98, CPU#16: vdpa/1463
[ 3788.514054] Modules linked in: octep_vdpa virtio_net virtio_vdpa [last unloaded: virtio_vdpa]
[ 3788.514064] CPU: 16 UID: 0 PID: 1463 Comm: vdpa Tainted: G W 6.18.0 #10 PREEMPT
[ 3788.514067] Tainted: [W]=WARN
[ 3788.514069] Hardware name: Marvell CN106XX board (DT)
[ 3788.514071] pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
[ 3788.514074] pc : devm_kfree+0x84/0x98
[ 3788.514076] lr : devm_kfree+0x54/0x98
[ 3788.514079] sp : ffff800084e2f220
[ 3788.514080] x29: ffff800084e2f220 x28: ffff0003b2366000 x27: 000000000000003f
[ 3788.514085] x26: 000000000000003f x25: ffff000106f17c10 x24: 0000000000000080
[ 3788.514089] x23: ffff00045bb8ab08 x22: ffff00045bb8a000 x21: 0000000000000018
[ 3788.514093] x20: ffff0004355c3080 x19: ffff00045bb8aa00 x18: 0000000000080000
[ 3788.514098] x17: 0000000000000040 x16: 000000000000001f x15: 000000000007ffff
[ 3788.514102] x14: 0000000000000488 x13: 0000000000000005 x12: 00000000000fffff
[ 3788.514106] x11: ffffffffffffffff x10: 0000000000000005 x9 : ffff800080c8c05c
[ 3788.514110] x8 : ffff800084e2eeb8 x7 : 0000000000000000 x6 : 000000000000003f
[ 3788.514115] x5 : ffff8000831bafe0 x4 : ffff800080c8b010 x3 : ffff0004355c3080
[ 3788.514119] x2 : ffff0004355c3080 x1 : 0000000000000000 x0 : 0000000000000000
[ 3788.514123] Call trace:
[ 3788.514125] devm_kfree+0x84/0x98 (P)
[ 3788.514129] virtnet_set_queues+0x134/0x2e8 [virtio_net]
[ 3788.514135] virtnet_probe+0x9c0/0xe00 [virtio_net]
[ 3788.514139] virtio_dev_probe+0x1e0/0x338
[ 3788.514144] really_probe+0xc8/0x3a0
[ 3788.514149] __driver_probe_device+0x84/0x170
[ 3788.514152] driver_probe_device+0x44/0x120
[ 3788.514155] __device_attach_driver+0xc4/0x168
[ 3788.514158] bus_for_each_drv+0x8c/0xf0
[ 3788.514161] __device_attach+0xa4/0x1c0
[ 3788.514164] device_initial_probe+0x1c/0x30
[ 3788.514168] bus_probe_device+0xb4/0xc0
[ 3788.514170] device_add+0x614/0x828
[ 3788.514173] register_virtio_device+0x214/0x258
[ 3788.514175] virtio_vdpa_probe+0xa0/0x110 [virtio_vdpa]
[ 3788.514179] vdpa_dev_probe+0xa8/0xd8
[ 3788.514183] really_probe+0xc8/0x3a0
[ 3788.514186] __driver_probe_device+0x84/0x170
[ 3788.514189] driver_probe_device+0x44/0x120
[ 3788.514192] __device_attach_driver+0xc4/0x168
[ 3788.514195] bus_for_each_drv+0x8c/0xf0
[ 3788.514197] __device_attach+0xa4/0x1c0
[ 3788.514200] device_initial_probe+0x1c/0x30
[ 3788.514203] bus_probe_device+0xb4/0xc0
[ 3788.514206] device_add+0x614/0x828
[ 3788.514209] _vdpa_register_device+0x58/0x88
[ 3788.514211] octep_vdpa_dev_add+0x104/0x228 [octep_vdpa]
[ 3788.514215] vdpa_nl_cmd_dev_add_set_doit+0x2d0/0x3c0
[ 3788.514218] genl_family_rcv_msg_doit+0xe4/0x158
[ 3788.514222] genl_rcv_msg+0x218/0x298
[ 3788.514225] netlink_rcv_skb+0x64/0x138
[ 3788.514229] genl_rcv+0x40/0x60
[ 3788.514233] netlink_unicast+0x32c/0x3b0
[ 3788.514237] netlink_sendmsg+0x170/0x3b8
[ 3788.514241] __sys_sendto+0x12c/0x1c0
[ 3788.514246] __arm64_sys_sendto+0x30/0x48
[ 3788.514249] invoke_syscall.constprop.0+0x58/0xf8
[ 3788.514255] do_el0_svc+0x48/0xd0
[ 3788.514259] el0_svc+0x48/0x210
[ 3788.514264] el0t_64_sync_handler+0xa0/0xe8
[ 3788.514268] el0t_64_sync+0x198/0x1a0
[ 3788.514271] ---[ end trace 0000000000000000 ]---
Fix by using virtio_device->device consistently for
allocation and deallocation |
| In the Linux kernel, the following vulnerability has been resolved:
PM: hibernate: Fix crash when freeing invalid crypto compressor
When crypto_alloc_acomp() fails, it returns an ERR_PTR value, not NULL.
The cleanup code in save_compressed_image() and load_compressed_image()
unconditionally calls crypto_free_acomp() without checking for ERR_PTR,
which causes crypto_acomp_tfm() to dereference an invalid pointer and
crash the kernel.
This can be triggered when the compression algorithm is unavailable
(e.g., CONFIG_CRYPTO_LZO not enabled).
Fix by adding IS_ERR_OR_NULL() checks before calling crypto_free_acomp()
and acomp_request_free(), similar to the existing kthread_stop() check.
[ rjw: Added 2 empty code lines ] |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
Call Trace:
__hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72)
bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517)
ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66)
ptp_clock_unregister (drivers/ptp/ptp_clock.c:518)
bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134)
bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889)
Lines are against commit f8f9c1f4d0c7 ("Linux 6.19-rc3")
Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before
freeing HWRM resources. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: microchip: fix potential UAF in auxdev release callback
Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in
adev_release()"), the auxiliary device is not torn down in the correct
order. If auxiliary_device_add() fails, the release callback will be
called twice, resulting in a UAF. Due to timing, the auxdev code in this
driver "took inspiration" from the aforementioned commit, and thus its
bugs too!
Moving auxiliary_device_uninit() to the unregister callback instead
avoids the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov772x: Fix memleak in ov772x_probe()
A memory leak was reported when testing ov772x with bpf mock device:
AssertionError: unreferenced object 0xffff888109afa7a8 (size 8):
comm "python3", pid 279, jiffies 4294805921 (age 20.681s)
hex dump (first 8 bytes):
80 22 88 15 81 88 ff ff ."......
backtrace:
[<000000009990b438>] __kmalloc_node+0x44/0x1b0
[<000000009e32f7d7>] kvmalloc_node+0x34/0x180
[<00000000faf48134>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev]
[<00000000da376937>] ov772x_probe+0x1c3/0x68c [ov772x]
[<000000003f0d225e>] i2c_device_probe+0x28d/0x680
[<00000000e0b6db89>] really_probe+0x17c/0x3f0
[<000000001b19fcee>] __driver_probe_device+0xe3/0x170
[<0000000048370519>] driver_probe_device+0x49/0x120
[<000000005ead07a0>] __device_attach_driver+0xf7/0x150
[<0000000043f452b8>] bus_for_each_drv+0x114/0x180
[<00000000358e5596>] __device_attach+0x1e5/0x2d0
[<0000000043f83c5d>] bus_probe_device+0x126/0x140
[<00000000ee0f3046>] device_add+0x810/0x1130
[<00000000e0278184>] i2c_new_client_device+0x359/0x4f0
[<0000000070baf34f>] of_i2c_register_device+0xf1/0x110
[<00000000a9f2159d>] of_i2c_notify+0x100/0x160
unreferenced object 0xffff888119825c00 (size 256):
comm "python3", pid 279, jiffies 4294805921 (age 20.681s)
hex dump (first 32 bytes):
00 b4 a5 17 81 88 ff ff 00 5e 82 19 81 88 ff ff .........^......
10 5c 82 19 81 88 ff ff 10 5c 82 19 81 88 ff ff .\.......\......
backtrace:
[<000000009990b438>] __kmalloc_node+0x44/0x1b0
[<000000009e32f7d7>] kvmalloc_node+0x34/0x180
[<0000000073d88e0b>] v4l2_ctrl_new.cold+0x19b/0x86f [videodev]
[<00000000b1f576fb>] v4l2_ctrl_new_std+0x16f/0x210 [videodev]
[<00000000caf7ac99>] ov772x_probe+0x1fa/0x68c [ov772x]
[<000000003f0d225e>] i2c_device_probe+0x28d/0x680
[<00000000e0b6db89>] really_probe+0x17c/0x3f0
[<000000001b19fcee>] __driver_probe_device+0xe3/0x170
[<0000000048370519>] driver_probe_device+0x49/0x120
[<000000005ead07a0>] __device_attach_driver+0xf7/0x150
[<0000000043f452b8>] bus_for_each_drv+0x114/0x180
[<00000000358e5596>] __device_attach+0x1e5/0x2d0
[<0000000043f83c5d>] bus_probe_device+0x126/0x140
[<00000000ee0f3046>] device_add+0x810/0x1130
[<00000000e0278184>] i2c_new_client_device+0x359/0x4f0
[<0000000070baf34f>] of_i2c_register_device+0xf1/0x110
The reason is that if priv->hdl.error is set, ov772x_probe() jumps to the
error_mutex_destroy without doing v4l2_ctrl_handler_free(), and all
resources allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std()
are leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep: cancel queued works in probe error path
If it fails to get the devices's MAC address, octep_probe exits while
leaving the delayed work intr_poll_task queued. When the work later
runs, it's a use after free.
Move the cancelation of intr_poll_task from octep_remove into
octep_device_cleanup. This does not change anything in the octep_remove
flow, but octep_device_cleanup is called also in the octep_probe error
path, where the cancelation is needed.
Note that the cancelation of ctrl_mbox_task has to follow
intr_poll_task's, because the ctrl_mbox_task may be queued by
intr_poll_task. |
