| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Mobile and Snapdragon Wear MDM9206, MDM9607, MDM9650, MSM8909W, SD 210/SD 212/SD 205, SD 400, SD 410/12, SD 425, SD 430, SD 450, SD 600, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 800, SD 808, SD 810, SD 820, SD 835, and SDX20, address and size passed to SCM command 'TZ_INFO_GET_SECURE_STATE_LEGACY_ID' from HLOS Kernel were not being checked, so access outside DDR would occur. |
| Prior to v0.6.1, bored-agent failed to sanitize incoming kubernetes impersonation headers allowing a user to override assigned user name and groups. |
| On EX4300-MP Series devices with any lo0 filters applied, transit network traffic may reach the control plane via loopback interface (lo0). The device may fail to forward such traffic. This issue affects Juniper Networks Junos OS 18.2 versions prior to 18.2R1-S2, 18.2R2 on EX4300-MP Series. This issue does not affect any other EX series devices. |
| A vulnerability in the fabric infrastructure VLAN connection establishment of the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, adjacent attacker to bypass security validations and connect an unauthorized server to the infrastructure VLAN. The vulnerability is due to insufficient security requirements during the Link Layer Discovery Protocol (LLDP) setup phase of the infrastructure VLAN. An attacker could exploit this vulnerability by sending a malicious LLDP packet on the adjacent subnet to the Cisco Nexus 9000 Series Switch in ACI mode. A successful exploit could allow the attacker to connect an unauthorized server to the infrastructure VLAN, which is highly privileged. With a connection to the infrastructure VLAN, the attacker can make unauthorized connections to Cisco Application Policy Infrastructure Controller (APIC) services or join other host endpoints. |
| A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). |
| The Kubernetes kube-apiserver mistakenly allows access to a cluster-scoped custom resource if the request is made as if the resource were namespaced. Authorizations for the resource accessed in this manner are enforced using roles and role bindings within the namespace, meaning that a user with access only to a resource in one namespace could create, view update or delete the cluster-scoped resource (according to their namespace role privileges). Kubernetes affected versions include versions prior to 1.13.9, versions prior to 1.14.5, versions prior to 1.15.2, and versions 1.7, 1.8, 1.9, 1.10, 1.11, 1.12. |
| A potential improper access control vulnerability exists in the JSON-RPC interface of the Bosch Smart Home Controller (SHC) before 9.8.905 that may result in a successful denial of service of the SHC and connected sensors and actuators. In order to exploit the vulnerability, the adversary needs to have successfully paired an app or service, which requires user interaction. |
| A vulnerability in the scheduled meeting template feature of Cisco Webex Meetings could allow an authenticated, remote attacker to delete a scheduled meeting template that belongs to another user in their organization. The vulnerability is due to insufficient authorization enforcement for requests to delete scheduled meeting templates. An attacker could exploit this vulnerability by sending a crafted request to the Webex Meetings interface to delete a scheduled meeting template. A successful exploit could allow the attacker to delete a scheduled meeting template that belongs to a user other than themselves. |
| A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later. |
| In Android before 2018-04-05 or earlier security patch level on Qualcomm Small Cell SoC, Snapdragon Automobile, Snapdragon Mobile, and Snapdragon Wear FSM9055, IPQ4019, MDM9206, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, SD 210/SD 212/SD 205, SD 400, SD 410/12, SD 425, SD 430, SD 450, SD 617, SD 625, SD 650/52, SD 800, SD 808, SD 810, SD 820, SD 820A, SD 835, SD 845, SD 850, and SDX20, improper access control in system call leads to unauthorized access. |
| An attacker could prematurely expire a verification code, making it unusable by the patient, making the patient unable to upload their TEKs to generate exposure notifications. We recommend upgrading the Exposure Notification server to V1.1.2 or greater. |
| A vulnerability in the administrative web interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain additional privileges on an affected device. The vulnerability is due to improper controls on certain pages in the web interface. An attacker could exploit this vulnerability by authenticating to the device with an administrator account and sending a crafted HTTP request. A successful exploit could allow the attacker to create additional Admin accounts with different user roles. An attacker could then use these accounts to perform actions within their scope. The attacker would need valid Admin credentials for the device. This vulnerability cannot be exploited to add a Super Admin account. |
| Red Hat Keycloak before version 2.4.0 did not correctly check permissions when handling service account user deletion requests sent to the rest server. An attacker with service account authentication could use this flaw to bypass normal permissions and delete users in a separate realm. |
| Dell Hybrid Client below 1.8 version contains a guest user profile corruption vulnerability. A WMS privilege attacker could potentially exploit this vulnerability, leading to DHC system not being accessible. |
| A vulnerability in the web application of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to specify non-log files as sources for syslog reporting. This vulnerability is due to improper restriction of the syslog configuration. An attacker could exploit this vulnerability by configuring non-log files as sources for syslog reporting through the web application. A successful exploit could allow the attacker to read non-log files on the CSPC. |
| A vulnerability in the application environment of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to gain unauthorized access to the JBoss Enterprise Application Platform (JBoss EAP) on an affected device. The vulnerability is due to an incorrect configuration of the authentication settings on the JBoss EAP. An attacker could exploit this vulnerability by authenticating with a specific low-privilege account. A successful exploit could allow the attacker to gain unauthorized access to the JBoss EAP, which should be limited to internal system accounts. |
| A potential improper access control vulnerability exists in the JSON-RPC interface of the Bosch Smart Home Controller (SHC) before 9.8.905 that may result in reading or modification of the SHC's configuration or triggering and restoring backups. In order to exploit the vulnerability, the adversary needs to have successfully paired an app or service, which requires user interaction. |
| Improper Access Control vulnerability in Talya Informatics Travel APPS allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Travel APPS: before v17.0.68. |
| In Garden versions 0.22.0-0.329.0, a vulnerability has been discovered in the garden-linux nstar executable that allows access to files on the host system. By staging an application on Cloud Foundry using Diego and Garden installations with a malicious custom buildpack an end user could read files on the host system that the BOSH-created vcap user has permissions to read and then package them into their app droplet. |
| A vulnerability has been identified in IEC 61850 system configurator (All versions < V5.80), DIGSI 5 (affected as IEC 61850 system configurator is incorporated) (All versions < V7.80), DIGSI 4 (All versions < V4.93), SICAM PAS/PQS (All versions < V8.11), SICAM PQ Analyzer (All versions < V3.11), SICAM SCC (All versions < V9.02 HF3). A service of the affected products listening on all of the host's network interfaces on either port 4884/TCP, 5885/TCP, or port 5886/TCP could allow an attacker to either exfiltrate limited data from the system or to execute code with Microsoft Windows user permissions. Successful exploitation requires an attacker to be able to send a specially crafted network request to the vulnerable service and a user interacting with the service's client application on the host. In order to execute arbitrary code with Microsoft Windows user permissions, an attacker must be able to plant the code in advance on the host by other means. The vulnerability has limited impact to confidentiality and integrity of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known. Siemens confirms the security vulnerability and provides mitigations to resolve the security issue. |
