| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm87) Fix drvdata type confusion in vrm_show() and vrm_store()
When an LM87 or ADM1024 device is probed with VID support enabled, reading
from or writing to the vrm sysfs attribute triggers a driver data type
confusion in vrm_show() and vrm_store() in drivers/hwmon/lm87.c.
In lm87_probe(), the driver stores the struct lm87_data pointer on the I2C
client via i2c_set_clientdata() and passes the struct i2c_client pointer as
the drvdata argument to devm_hwmon_device_register_with_groups(), which
attaches the attribute groups to the registered hwmon device with client as
its driver_data. Unlike the other sysfs callbacks that retrieve client via
dev_get_drvdata() and then obtain data via i2c_get_clientdata(), vrm_show()
and vrm_store() assign dev_get_drvdata(dev) directly to struct lm87_data *.
Dereferencing data->vrm therefore accesses the struct i2c_client instance
at offsetof(struct lm87_data, vrm), causing vrm_show() to leak an unrelated
byte from struct i2c_client to userspace and vrm_store() to corrupt a byte
within struct i2c_client while failing to update the actual VRM value.
Fix the problem by assigning the return value from dev_get_drvdata(dev) to
struct i2c_client *client and using i2c_get_clientdata() to get the actual
client data. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (peci/dimmtemp) Fix devres leak and UAF on concurrent unbind
When a peci_dimmtemp device is unbound concurrently with its delayed
initialization work (detect_work), newly allocated devm resources and
the hwmon device are leaked, leading to a use-after-free when reading
the lingering hwmon sysfs attributes.
In peci_dimmtemp_probe(), detect_work is registered for cancellation via
devm_delayed_work_autocancel(). During driver detach, devres_release_all()
first moves all existing entries from dev->devres_head onto a local todo
list before invoking their release callbacks in reverse order. If
create_dimm_temp_info_delayed() is already running when
devm_delayed_work_drop() calls cancel_delayed_work_sync(),
create_dimm_temp_info() can allocate dimmtemp_label strings via
devm_kzalloc()/devm_kasprintf() and register the hwmon device via
devm_hwmon_device_register_with_info(), appending new devres entries to
the now-empty dev->devres_head. Once the work finishes,
devres_release_all() frees priv and priv->name from the local todo list
without re-evaluating dev->devres_head, leaving the late devres
allocations and registered hwmon device behind with a dangling priv
pointer.
Cancel detect_work synchronously in a driver .remove() callback instead
of relying on devm_delayed_work_autocancel() so that the work is fully
drained before devres_release_all() detaches dev->devres_head, allowing
any devm resources registered by the delayed work to be released in
proper reverse order. Also only schedule detect_work when
check_populated_dimms() returns -EAGAIN so that probe failure paths do
not leave delayed work pending. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Conditionally resched when retrying gPTE walk on A/D update failure
Conditionally reschedule when retrying a guest PTE walk because the CMPXCHG
to update A/D bits failed, e.g. because a different task/vCPU modified the
relevant gPTEs. On kernels without involuntary preemption of some kind, a
misbehaving guest can "capture" a pCPU effectively indefinitely and trigger
soft lockups by continuously modifying its gPTEs such that the result of
the walk is remains valid. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: flush deferred unmaps before dropping a failed folio
collapse_file() can fail its reference-count or dirty-folio check after
unmapping with TTU_BATCH_FLUSH. Both paths put back the isolated folio,
then unlock it and drop the lookup reference before reaching the common
try_to_unmap_flush().
The page-cache reference does not keep the folio stable once the lock is
released. Another collapse can replace and free it. With its PTEs
already gone, that collapse cannot flush the first task's per-task TLB
batch, and retract_page_tables() skips short or unaligned VMAs. A CPU can
therefore retain a user translation to the freed folio. This has been
reproduced with unprivileged MADV_COLLAPSE on a memfd.
Flush at out_unlock while the lookup reference and folio lock are still
held. The common flush continues to cover the accumulated pagelist on
both success and rollback, preserving batching on successful collapses. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix address wraparound when scanning large folio PTEs
numa_rebuild_large_mapping() and do_swap_page() can be tricked into
generating an address wraparound, crashing the kernel. All that's required
is to map a tail page of a large folio close enough to the start/end of
the address space to e.g., make
unsigned long addr_start = addr - (nr << PAGE_SHIFT);
to wrap around.
Let's fix it by providing a better helper, folio_scan_range(), that
takes care of staying within VMA and page table boundaries while
handling possible wraparounds.
There are some nasty details, like not being able to use pmd_addr_end()
in this context. Add some helpful comments for these cases. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix mremap deadlock when PMD sharing is possible
move_hugetlb_page_tables() holds the mapping's i_mmap_rwsem for
write while moving hugetlb PTEs. This prevents races with truncation
and protects huge_pmd_unshare(), but the move loop must not call
helpers that can acquire the same rwsem for read.
huge_pte_alloc() can do that when the destination can use PMD
sharing: it may call huge_pmd_share(), which takes i_mmap_rwsem for
read while searching for a shareable PMD table. Calling it while the
move path already holds i_mmap_rwsem for write can deadlock.
Avoid that path for PMD-sized hugetlb mappings that can use PMD
sharing. Instead of allocating or sharing the destination page table
while moving, zap the source range and let the destination fault path
populate or share the PMD lazily.
Reuse the hugetlb unmap logic for the source-side zap by splitting
the core loop out of __unmap_hugepage_range(). The wrapper keeps the
existing tlb_start_vma(), tlb_end_vma() and huge_pmd_unshare_flush()
behavior, while move_hugetlb_page_tables() can reuse the unmap loop
with its existing mmu_gather. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: do not index before the entry array when dividing an empty bucket
ocfs2_divide_xattr_bucket() appends an empty bucket carrying a sentinel
hash when the source bucket has no divide position, taking that hash
from xh_entries[start - 1]. ocfs2_xattr_find_divide_pos() returns count
when every entry shares one hash, and its loop does not run at all for
count < 2, so an empty bucket comes back with start == count == 0 and
the read is xh_entries[-1].
That is outside the __counted_by_le(xh_count) bounds of xh_entries[] and
lands on the header, so the value picked up is
xh_count | xh_free_start << 16. One above it is written into the new
bucket's xh_entries[0] and committed, which leaves a bucket whose first
hash does not follow the bucket before it. ocfs2_xattr_bucket_find()
binary searches on xh_entries[0], so the broken key hides the range the
sentinel was meant to cover: getxattr() answers -ENODATA for an
attribute that is stored, and an insert can go to the wrong bucket and
leave two copies of a name. The cross cluster divide hands the same
value back as a tree record's e_cpos, which then claims a hash range it
does not cover.
Read xh_entries[0] instead. The branch is only reached when every entry
shares one hash, so for a non-empty bucket it holds the same value, and
for an empty one it is the slot that carries the bucket key.
An empty bucket reaches the divide from
ocfs2_check_xattr_bucket_collision(), which reports no collision for
one, through ocfs2_add_new_xattr_bucket() and
ocfs2_extend_xattr_bucket(). It does not take a failed set to get
there: a divide that finds no position is itself what leaves an empty
sentinel bucket behind, and a later extend can pick it as the target. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: fix VA/PA confusion in the coherent page fault path
vduse_domain_get_coherent_page() assumes that iotlb entries above
bounce_size were installed by vduse_domain_alloc_coherent(), so it
treats map->addr as a physical address. But vduse registers with
use_va = true, and when the device is bound to vhost_vdpa,
vhost_vdpa_va_map() stores a userspace virtual address in map->addr,
which vduse_domain_set_map() then copies into the same iotlb. A
process holding the domain file descriptor across a rebind can
therefore fault in an arbitrary physical page with read/write
access, ignoring the entry permissions.
Additionally, since the domain file mmap lacks VM_IO, the domain
file itself can be mapped and passed to vhost_vdpa_va_map(),
producing self-referential entries that bypass the coherent path
check.
To fix, only translate entries whose backing file is the domain
file itself in vduse_domain_get_coherent_page(), reject such
entries in vduse_domain_set_map() since only external mappings
should be imported, and set VM_IO on the domain file mmap so
vhost_vdpa_va_map() refuses to map it in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix out-of-bounds read in blk_mq_free_rqs
A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there
is a mismatch between the number of hardware queues allocated for the IO
scheduler (et->nr_hw_queues) and the number of hardware queues in the block
tag set (set->nr_hw_queues).
This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway
through (e.g., due to memory pressure during
blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is
restored with a larger number of hardware queues than the block tag set
actually has.
When the elevator is later freed, blk_mq_free_sched_tags() iterates up to
the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(),
it attempts to access set->tags[hctx_idx] to get the driver tags. Because
set->nr_hw_queues was not updated due to the earlier failure, set->tags
still has the old (smaller) size, leading to an out-of-bounds read.
BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680
Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839
Call Trace:
blk_mq_free_rqs+0xde/0x680
blk_mq_free_map_and_rqs+0x40/0xf0
blk_mq_free_sched_tags
blk_mq_free_sched_res+0xeb/0x280
elevator_change_done+0x1d2/0x5c0
elevator_change+0x34f/0x480
elv_iosched_store+0x504/0x630
queue_attr_store+0x207/0x2b0
To fix this, explicitly check if hctx_idx < set->nr_hw_queues before
accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the
hardware queue doesn't exist in the tag set, meaning there are no driver
tags to clear mappings from. In this case, safely set drv_tags to NULL. The
subsequent call to blk_mq_clear_rq_mapping() already handles a NULL
drv_tags pointer and will safely return. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices
Sending a PF_PACKET bypasses the CAN framework logic and can directly
reach a CAN driver's xmit() function. The PF_PACKET framework only
checks that skb->len does not exceed the net_device MTU.
For a CAN device that is not CAN XL capable, anything above CANFD_MTU
(72 bytes) is therefore dropped before it reaches the driver. However,
CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in
the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to
2060 bytes.
As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes
can pass both the MTU and the can_dropped_invalid_skb() checks.
A driver that does not support CAN XL will interpret canxl_frame->flags
as a length because of the overlap with can_frame->len. And because
CANXL_XLF is set, the resulting length is between 128 and 255. For
drivers that do not check can_frame->len before copying can_frame->data,
as most drivers do, this results in a buffer overflow of up to 247
bytes.
Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL
capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp()
try_collapse_pte_mapped_thp() drops the PTE lock after it has cleared the
page table, and takes the PMD lock and the PTE lock to remove it.
In between, MADV_DONTNEED with CONFIG_PT_RECLAIM can reclaim the
page table. The pmd_same() check is supposed to handle this, but it is
only done with CONFIG_SPLIT_PTE_PTLOCKS.
Fix it by performing the check unconditionally.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: adjust description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast
With nr_pages == 0, GUP-fast still enters its page table walk and can
write past the caller's page array. The old end <= start check caught
empty ranges, but was replaced with an overflow check.
Users such as OrangeFS can pass a zero page count derived from a
userspace-supplied length. So let's return zero for nr_pages == 0 before
starting the walk, just like GUP-slow.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast
The overflow check in gup_fast_fallback() only covers the addition to
start. The preceding nr_pages << PAGE_SHIFT can already have truncated
the length on 32bit.
Users such as RapidIO's rio_dma_transfer() can derive such page counts
from a 64-bit userspace length.
Let's just check_shl_overflow() to reject any such overflow with
-EOVERFLOW early. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: free the EP4 URB when input setup fails
The three controllers that use the EP4 input URB allocate it before
checking the endpoint type and before registering the input device. On
failure they jump to exit_free_idev, which clears cdev->input_dev but
leaves cdev->ep4_in_urb set. The card teardown then calls
snd_usb_caiaq_input_free(), which returns early because input_dev is
NULL, so the URB is never freed.
Release the URB before dropping the input device on the error path. |
| GPAC before 26.07.0 contains a stack-based buffer overflow vulnerability in gf_filter_pid_resolve_file_template_ex() in src/filter_core/filter_pid.c that allows local attackers to write past fixed GF_MAX_PATH stack buffers. Attackers can convince a user to segment a crafted NHML input referencing an overly long media file name with MP4Box -dash to crash the process. |
| GPAC before 26.07.0 contains an uncontrolled recursion vulnerability in dasher_gather_deps() in src/filters/dasher.c that fails to detect cyclic stream dependency chains. Attackers can supply a crafted MPEG-2 TS file that MP4Box processes with -dash, exhausting the stack and crashing the process for denial of service. |
| GPAC before 26.07.0 contains a heap-based buffer overflow in gf_mpd_resolve_url() in src/media_tools/mpd.c that allows attackers to write past a heap buffer via crafted DASH manifests. Attackers can supply a crafted MPD whose segment template expands beyond the allocation through unchecked strcat() calls, crashing MP4Box and causing denial of service. |
| GPAC before 26.02.0 contains an out-of-bounds read vulnerability in m2tsdmx_send_packet() in src/filters/dmx_m2ts.c caused by double-skipping the VC-1 start-code offset. Attackers can supply a crafted MPEG-2 TS VC-1 stream that underflows the remaining length, causing memcpy() to over-read and crash MP4Box on import. |
| An use of hard-coded cryptographic key vulnerability has been reported to affect Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system.
We have already fixed the vulnerability in the following version:
Hybrid Backup Sync 26.4.0.521 and later
Hybrid Backup Sync 26.4.1.563 and later |
| An use of hard-coded cryptographic key vulnerability has been reported to affect Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system.
We have already fixed the vulnerability in the following version:
Hybrid Backup Sync 26.4.0.521 and later
Hybrid Backup Sync 26.4.1.563 and later |