| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered on Tektronix 3 Series MDO devices before 1.21.1. A path traversal vulnerability exists in the web management interface of the device. Insufficient validation of user-supplied file paths allows remote attackers to read arbitrary files accessible to the application. Depending on configuration, exploitation may be possible without authentication. |
| smpeg through 2.0.0 contains a heap out-of-bounds read vulnerability in MPEGsystem::FillBuffer() that allows attackers to read past the 16384-byte buffer by supplying a crafted system header stream table. Attackers can provide an MPEG file whose stream table bytes all set the high bit, which crashes applications opening it through SMPEG_new, SMPEG_new_rwops, or SMPEG_new_data. |
| smpeg through 2.0.0 contains an integer underflow vulnerability in stream_header() in MPEGsystem.cpp that allows attackers to wrap packet_size by declaring an undersized packet length. Attackers can supply a crafted MPEG file opened via SMPEG_new, SMPEG_new_rwops or SMPEG_new_data to trigger a reachable assertion or out-of-bounds copy, crashing the application. |
| Vita3K before build 4187 contains a path traversal (zip slip) vulnerability in install_archive_content() that allows attackers to write files outside the install directory via crafted .vpk archives. Attackers can embed '..' segments or absolute paths in zip entry names to write attacker-controlled files anywhere writable by Vita3K, potentially enabling host code execution. |
| libstrophe through 0.14.0 contains a stack-based buffer overflow vulnerability in SCRAM_Hi that allows malicious XMPP servers to overflow a 128-byte stack buffer by sending an oversized SCRAM salt. Attackers can send a server-first-message whose s= attribute decodes to more than 124 bytes, aborting the client or overwriting stack memory in NDEBUG builds. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled
Previously, BPID assignment under CONFIG_DCB assumed
`queue_to_pfc_map` was always initialized. For SDP VFs this leads to
invalid memory access as it was not initialized.
This patch adds a NULL check for `queue_to_pfc_map` before
dereferencing it. Also, simplifies the logic by always assigning a
default BPID first, then conditionally overriding it if CONFIG_DCB is
enabled and the map exists. |
| A vulnerability was determined in satya-vinay Events-Management-System up to 437c77ceb69bf9fe2e3f4f46f7871b83f425383a. Affected is the function mysqli_query of the file doedit.php of the component Registration-Edit Handler. This manipulation of the argument id/name/title/year/gender/fromdate/todate/people causes sql injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: cancel deferred work items in thread exit
If there are deferred work items on the thread todo list, then they are
not cleaned up in the Thread::release() method. Thus, update the code to
clean up the work items even if they are deferred.
This can happen if the thread dies while it has an active outgoing
transaction. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame()
plen is u16 and computed as HDR_SIZE + dlen. For ACL/ISO frames dlen
is a 16-bit field, so a value >= 0xFFFC wraps the sum, bypassing the
"skb->len < plen" check and letting skb_trim() truncate the packet.
Widen plen to u32 so the addition cannot wrap. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix NULL pointer dereference in serial_core_unregister_port()
port->port_dev is NULL when no port device is installed: it is cleared
on teardown, and never set if registration failed before
serial_core_port_device_add(). serial_core_unregister_port() passes it
straight to serial_core_get_ctrl_dev(), which dereferences it:
KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047]
RIP: serial_core_unregister_port
Call Trace:
serial8250_unregister_port
serial8250_remove
unbind_store
Return early when there is no port device, and read port->port_dev
under port_mutex.
Also clear port->port_dev on the serial_core_register_port() error
path, where the port device has already been removed. |
| A flaw was found in oc-mirror's legacy v1 catalog cache rebuild. When the --build-catalog-cache flag is used, oc-mirror extracts an opm binary from the remote operator catalog image and executes it on the host without verifying its signature, digest, or integrity. An attacker who publishes a malicious catalog image to a registry could supply a trojanized opm binary that is executed with the privileges of the user running oc-mirror, resulting in arbitrary code execution on the mirroring host. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Kylin. Special parameter in JDBC URL can lead to code injection.
Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: set up the frame pointer for the exception callback
A program acting as exception boundary saves all callee-saved registers,
so build_prologue() takes the exception_cb path and never calls
push_callee_regs(). That is the only place find_used_callee_regs() runs,
and with it the only place ctx->fp_used is set, so the callback prologue
does not emit the
mov x25, sp
that points BPF_REG_FP at the frame the callback runs on. x25 keeps
whatever it held when bpf_throw() was called. If the throw came from a
subprogram that uses its own BPF stack, that is the subprogram's frame
pointer, and since the subprogram never returns it never restores x25
either.
Stack accesses through BPF_REG_FP are rewritten to be stack pointer
relative, so those still land in the callback's own frame. Materializing
the register does not: a callback that passes the address of a local
variable to a helper hands over an address in the dead subprogram's
frame. That address is below the callback's stack pointer by then, and
the helper's own call chain covers it, so the helper can write over its
own return address. 0x1234 below is the value the helper was asked to
store:
pc : 0x1234
lr : 0x1234
Call trace:
0x1234 (P)
bpf_test_run+0x188/0x3e0
bpf_prog_test_run_skb+0x47c/0x998
__sys_bpf+0xbdc/0xdd8
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Set ctx->fp_used on the exception callback path so that the existing code
further down sets x25 from the stack pointer. The epilogue restores it
from the main program's save area along with the other callee-saved
registers, as it already does. x86 sets the frame pointer for the
callback from the argument it is passed, and powerpc computes it from
the stack pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: reject oversized TX packets in send_frame()
btintel_pcie_send_frame() eventually copies skb->data into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in
btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended.
A user-space process with HCI_CHANNEL_USER access can inject an
oversized packet and overflow the buffer.
Reject packets larger than
BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ade9000: fix NULL pointer dereference in clkout registration
ade9000_setup_clkout() passes NULL as the register address when
registering a divider clock. During clock registration, the common
clock framework calls clk_divider_recalc_rate(), which dereferences
the address through readl(). As a result, probing an ADE9000 configured
as a clock provider with an external input clock crashes.
CLKOUT passes CLKIN through without changing its rate. Register it as
a 1:1 fixed-factor clock, which does not require register access.
This change does not affect the configuration using the internal clock,
for which the driver does not register a clock provider. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ade9000: handle Phase C dip events in IRQ1 handler
ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the
STATUS1 event bits, so a value of 25 left out the highest event bit,
ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported.
Bump the value to 26 so bit 25 is scanned. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix _gaccess_shadow_fault()
In some circumstances, it is possible that the page of nested guest
memory that is being shadowed is not present at all in the parent guest
gmap. dat_entry_walk() will not find any leaf entry and return with
-ENOENT, which will erroneously be propagated all the way to userspace.
Fix by manually calling gmap_link() on the memory of the nested guest
that is being shadowed if the mapping was not already present. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key()
Some callers pass NULL as oldkey. Calling page_cond_set_storage_key()
will cause that NULL pointer to get dereferenced.
Fix by checking for NULL and assigning the pointer to a dummy local
variable to avoid crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix potential races in dat skey functions
When dat_cond_set_storage_key() finds a large page, it will
conditionally set the storage key in absolute memory using
large_crste_to_phys() to get the absolute address.
There is a race window between dat_entry_walk() and
large_crste_to_phys(): the large page could have been split
concurrently, and large_crste_to_phys() might be called with a crste
that does not designate a large page, leading to crashes.
Similar issues were also present in dat_set_storage_key().
dat_get_storage_key() and dat_reset_reference_bit() did instead check
for a potential concurrent splitting of the large page, but then
handled it incorrectly.
Fix by performing a READ_ONCE on the crste pointer, checking and using
the result, instead of dereferencing the pointer again. In case a race
is detacted, try dat_entry_walk() again. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: riscv: Fix NACL hfence entry update order
The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE
entry to be populated as follows:
1) find an unused entry with Config.Pending == 0
2) update the Page_Number and Page_Count words
3) update the Config word with Config.Pending set
__kvm_riscv_nacl_hfence() writes the Config word first, so the SBI
implementation (or NACL hardware) can observe a pending entry with
pnum/pcount values left over from the previous use of that entry,
resulting in incorrect TLB flush ranges.
Write pnum and pcount first and the Config word last. Since the
consumer is an external agent on coherent shared memory, use
WRITE_ONCE() to stop the compiler from reordering the stores and
smp_wmb() to make the parameter words globally visible before the
Pending bit is set. |