| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In EmberZNet v9.0.2 and earlier, malformed GetGroupMembership commands can trigger repeated reads past the end of the message payload and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Groups cluster may be impacted. |
| In EmberZNet v9.0.2 and earlier, malformed or out-of-range Door Lock user identifiers can trigger out-of-bounds table reads and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Door Lock cluster may be impacted. |
| In EmberZNet v9.0.2 and earlier, a malformed GetProfileResponse message can trigger out-of-bounds reads while iterating interval entries and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Simple Metering cluster may be impacted. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, the NONET parse option, which Nokogiri turns on by default for Nokogiri::XML::Schema (see CVE-2020-26247), was not correctly enforced on the JRuby implementation. As a result, a schema parsed with default options could still cause external resources to be fetched over the network, potentially enabling SSRF or XXE attacks. This vulnerability is fixed in 1.19.4. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::NodeSet#[] (and its alias #slice) checked the requested index against the node set's bounds using a 32-bit-truncated copy of the index. A large negative index could pass the check and then be used at full width, reading outside the node set's storage. On CRuby this is an out-of-bounds read that typically crashes the process; on JRuby it is not memory-unsafe but returns an incorrect node. This vulnerability is fixed in 1.19.4. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::Document#root= validated only that the new root was a Nokogiri::XML::Node, allowing a DTD node to be set as the document root. The result is a heap use-after-free during garbage collection or finalization, leading to an invalid memory read or potentially a segfault. This vulnerability is fixed in 1.19.4. |
| List::SomeUtils::XS versions before 0.59 for Perl have a heap buffer overflow in the pairwise function.
pairwise() collects the values returned by the block into a heap buffer sized to the longer input array, then grows the buffer before each copy with a single quadrupling (alloc <<= 2) instead of a loop. A block call that returns more than four times the current allocation in one invocation outgrows that one quadrupling, and the copy writes past the end of the buffer.
Any caller of pairwise() whose block returns, for a single pair, more than four times the longer input array's length writes past the buffer and corrupts the heap. |
| Hydra through 9.7, fixed in commit 9cc84c2, contains a stack buffer overflow in NTLM authentication across SMTP, POP3, IMAP, NNTP, HTTP, HTTP-Proxy, and HTTP-Proxy-Urlenum modules when processing malicious NTLM Type-2 challenges. A malicious server can send a crafted NTLM Type-2 challenge with an excessively long domain string, causing base64-encoded response data to overflow a 500-byte stack buffer by 18 to 330 bytes, enabling remote code execution on systems without stack protection. |
| libais through 0.15 VdmStream::AddLine uses an unchecked sentinel value as a vector index when processing AIS sentences with empty or out-of-range sequential message IDs. Remote attackers can crash services or vessel systems by sending crafted AIVDM sentences over VHF marine radio or IP feeds, causing out-of-bounds memory access and potential corruption. |
| RTKLIB through 2.4.3 contains an off-by-one out-of-bounds read vulnerability in the decode_ssr3 function at src/rtcm3.c:1446 that allows remote attackers to trigger a global buffer overflow via crafted RTCM3 SSR messages with attacker-controlled signal mode fields. Remote attackers can exploit this vulnerability by sending malicious SSR correction streams over NTRIP or serial connections to cause denial of service or crash RTKLIB rovers and CORS servers. |
| RTKLIB through 2.4.3 contains a heap buffer overflow vulnerability in the readrnxobsb function in src/rinex.c that allows attackers to trigger memory corruption by failing to clamp satellite count values from RINEX epoch headers. Attackers can craft malicious RINEX files declaring more than 64 satellites per epoch to cause heap buffer overflow writes and out-of-bounds stack reads, crashing RTKLIB-based applications including rnx2rtkp and RTKPOST. |
| Unauthenticated Other Vulnerability Type in WpEvently <= 5.3.3 versions. |
| Unauthenticated Other Vulnerability Type in WP Travel Engine <= 6.7.10 versions. |
| Address bar spoofing in Arc Search for Android allows a remote attacker to display a trusted domain in the address bar while rendering attacker-controlled content, enabling phishing. |
| CarrierWave is a framework to upload files from Ruby applications. In versions prior to 2.2.7 and 3.1.3, the content_type_denylist check fails to escape regex metacharacters in string entries, causing the denylist to silently not match the content types it is intended to block. In lib/carrierwave/uploader/content_type_denylist.rb:57, denylist entries are interpolated directly into a regex without Regexp.quote or anchoring, so an entry such as image/svg+xml becomes the pattern /image\/svg+xml/, in which + is treated as a quantifier rather than a literal character and therefore never matches the real MIME type image/svg+xml. This is inconsistent with the allowlist implementation, which correctly applies both Regexp.quote and a \A anchor. Other content types containing regex metacharacters, such as application/xhtml+xml, are affected as well. As a result, any application that relies on content_type_denylist to block image/svg+xml, most commonly to prevent stored XSS, is silently unprotected. An attacker can upload an SVG file containing arbitrary JavaScript; if the application serves that SVG inline from its own origin, the script executes in the victim's browser, resulting in stored XSS. This issue has been fixed in versions 2.2.7 and 3.1.3. |
| Redis Lua HEAP overflow in cjson library vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 2.0.4 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
| swift-nio-http2's HTTP/2-to-HTTP/1.1 codec did not validate pseudo-header values for control characters before placing them into the translated HTTP/1.1 message. swift-nio-http2 1.44.1 adds validation of all pseudo-header values (:path, :authority, :scheme, :method, and :status) at both the HPACK header validation layer and the HTTP/2-to-HTTP/1.1 translation layer. Requests or responses containing CR, LF, or NUL bytes in any pseudo-header value are now rejected with a connection error. This issue is fixed in swift-nio-http2 1.44.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
| In the Linux kernel, the following vulnerability has been resolved:
efi/capsule-loader: fix incorrect sizeof in phys array reallocation
The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses
sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be
causing an undersized allocation.
The allocation is also inconsistent with the initial array allocation in
efi_capsule_open() that allocates one entry with sizeof(phys_addr_t),
and the efi_capsule_write() function that stores phys_addr_t values (not
pointers) via page_to_phys().
On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this
goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but
pointers are 32-bit, this allocates half the required space, which might
lead to a heap buffer overflow when storing physical addresses.
This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader:
fix incorrect allocation size") which fixed the same issue at the initial
allocation site. |
