| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix legacy client tracking initialization
Get rid of the nfsd4_legacy_tracking_ops->init() call in
check_for_legacy_methods(). That will be handled in the caller
(nfsd4_client_tracking_init()). Otherwise, we'll wind up calling
nfsd4_legacy_tracking_ops->init() twice, and the second time we'll
trigger the BUG_ON() in nfsd4_init_recdir(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix deadlock when freeing cgroup storage
The following commit
bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]")
first introduced deadlock prevention for fentry/fexit programs attaching
on bpf_task_storage helpers. That commit also employed the logic in map
free path in its v6 version.
Later bpf_cgrp_storage was first introduced in
c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
which faces the same issue as bpf_task_storage, instead of its busy
counter, NULL was passed to bpf_local_storage_map_free() which opened
a window to cause deadlock:
<TASK>
(acquiring local_storage->lock)
_raw_spin_lock_irqsave+0x3d/0x50
bpf_local_storage_update+0xd1/0x460
bpf_cgrp_storage_get+0x109/0x130
bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170
? __bpf_prog_enter_recur+0x16/0x80
bpf_trampoline_6442485186+0x43/0xa4
cgroup_storage_ptr+0x9/0x20
(holding local_storage->lock)
bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160
bpf_selem_unlink_storage+0x6f/0x110
bpf_local_storage_map_free+0xa2/0x110
bpf_map_free_deferred+0x5b/0x90
process_one_work+0x17c/0x390
worker_thread+0x251/0x360
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Progs:
- A: SEC("fentry/cgroup_storage_ptr")
- cgid (BPF_MAP_TYPE_HASH)
Record the id of the cgroup the current task belonging
to in this hash map, using the address of the cgroup
as the map key.
- cgrpa (BPF_MAP_TYPE_CGRP_STORAGE)
If current task is a kworker, lookup the above hash
map using function parameter @owner as the key to get
its corresponding cgroup id which is then used to get
a trusted pointer to the cgroup through
bpf_cgroup_from_id(). This trusted pointer can then
be passed to bpf_cgrp_storage_get() to finally trigger
the deadlock issue.
- B: SEC("tp_btf/sys_enter")
- cgrpb (BPF_MAP_TYPE_CGRP_STORAGE)
The only purpose of this prog is to fill Prog A's
hash map by calling bpf_cgrp_storage_get() for as
many userspace tasks as possible.
Steps to reproduce:
- Run A;
- while (true) { Run B; Destroy B; }
Fix this issue by passing its busy counter to the free procedure so
it can be properly incremented before storage/smap locking. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix racy issue from session lookup and expire
Increment the session reference count within the lock for lookup to avoid
racy issue with session expire. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Grab intel_display from the encoder to avoid potential oopsies
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()... |
| In the Linux kernel, the following vulnerability has been resolved:
team: prevent adding a device which is already a team device lower
Prevent adding a device which is already a team device lower,
e.g. adding veth0 if vlan1 was already added and veth0 is a lower of
vlan1.
This is not useful in practice and can lead to recursive locking:
$ ip link add veth0 type veth peer name veth1
$ ip link set veth0 up
$ ip link set veth1 up
$ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1
$ ip link add team0 type team
$ ip link set veth0.1 down
$ ip link set veth0.1 master team0
team0: Port device veth0.1 added
$ ip link set veth0 down
$ ip link set veth0 master team0
============================================
WARNING: possible recursive locking detected
6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted
--------------------------------------------
ip/7684 is trying to acquire lock:
ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
but task is already holding lock:
ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977)
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(team->team_lock_key);
lock(team->team_lock_key);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by ip/7684:
stack backtrace:
CPU: 3 UID: 0 PID: 7684 Comm: ip Not tainted 6.13.0-rc2-virtme-00441-ga14a429069bb #46
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_deadlock_bug.cold (kernel/locking/lockdep.c:3040)
__lock_acquire (kernel/locking/lockdep.c:3893 kernel/locking/lockdep.c:5226)
? netlink_broadcast_filtered (net/netlink/af_netlink.c:1548)
lock_acquire.part.0 (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? trace_lock_acquire (./include/trace/events/lock.h:24 (discriminator 2))
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? lock_acquire (kernel/locking/lockdep.c:5822)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
__mutex_lock (kernel/locking/mutex.c:587 kernel/locking/mutex.c:735)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? fib_sync_up (net/ipv4/fib_semantics.c:2167)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
notifier_call_chain (kernel/notifier.c:85)
call_netdevice_notifiers_info (net/core/dev.c:1996)
__dev_notify_flags (net/core/dev.c:8993)
? __dev_change_flags (net/core/dev.c:8975)
dev_change_flags (net/core/dev.c:9027)
vlan_device_event (net/8021q/vlan.c:85 net/8021q/vlan.c:470)
? br_device_event (net/bridge/br.c:143)
notifier_call_chain (kernel/notifier.c:85)
call_netdevice_notifiers_info (net/core/dev.c:1996)
dev_open (net/core/dev.c:1519 net/core/dev.c:1505)
team_add_slave (drivers/net/team/team_core.c:1219 drivers/net/team/team_core.c:1977)
? __pfx_team_add_slave (drivers/net/team/team_core.c:1972)
do_set_master (net/core/rtnetlink.c:2917)
do_setlink.isra.0 (net/core/rtnetlink.c:3117) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: bpf_local_storage: Always use bpf_mem_alloc in PREEMPT_RT
In PREEMPT_RT, kmalloc(GFP_ATOMIC) is still not safe in non preemptible
context. bpf_mem_alloc must be used in PREEMPT_RT. This patch is
to enforce bpf_mem_alloc in the bpf_local_storage when CONFIG_PREEMPT_RT
is enabled.
[ 35.118559] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 35.118566] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1832, name: test_progs
[ 35.118569] preempt_count: 1, expected: 0
[ 35.118571] RCU nest depth: 1, expected: 1
[ 35.118577] INFO: lockdep is turned off.
...
[ 35.118647] __might_resched+0x433/0x5b0
[ 35.118677] rt_spin_lock+0xc3/0x290
[ 35.118700] ___slab_alloc+0x72/0xc40
[ 35.118723] __kmalloc_noprof+0x13f/0x4e0
[ 35.118732] bpf_map_kzalloc+0xe5/0x220
[ 35.118740] bpf_selem_alloc+0x1d2/0x7b0
[ 35.118755] bpf_local_storage_update+0x2fa/0x8b0
[ 35.118784] bpf_sk_storage_get_tracing+0x15a/0x1d0
[ 35.118791] bpf_prog_9a118d86fca78ebb_trace_inet_sock_set_state+0x44/0x66
[ 35.118795] bpf_trace_run3+0x222/0x400
[ 35.118820] __bpf_trace_inet_sock_set_state+0x11/0x20
[ 35.118824] trace_inet_sock_set_state+0x112/0x130
[ 35.118830] inet_sk_state_store+0x41/0x90
[ 35.118836] tcp_set_state+0x3b3/0x640
There is no need to adjust the gfp_flags passing to the
bpf_mem_cache_alloc_flags() which only honors the GFP_KERNEL.
The verifier has ensured GFP_KERNEL is passed only in sleepable context.
It has been an old issue since the first introduction of the
bpf_local_storage ~5 years ago, so this patch targets the bpf-next.
bpf_mem_alloc is needed to solve it, so the Fixes tag is set
to the commit when bpf_mem_alloc was first used in the bpf_local_storage. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix deadlock during uvc_probe
If uvc_probe() fails, it can end up calling uvc_status_unregister() before
uvc_status_init() is called.
Fix this by checking if dev->status is NULL or not in
uvc_status_unregister(). |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: fix soft lockup in the OOM process
A soft lockup issue was found in the product with about 56,000 tasks were
in the OOM cgroup, it was traversing them when the soft lockup was
triggered.
watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066]
CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G
Hardware name: Huawei Cloud OpenStack Nova, BIOS
RIP: 0010:console_unlock+0x343/0x540
RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247
RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040
R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0
R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
vprintk_emit+0x193/0x280
printk+0x52/0x6e
dump_task+0x114/0x130
mem_cgroup_scan_tasks+0x76/0x100
dump_header+0x1fe/0x210
oom_kill_process+0xd1/0x100
out_of_memory+0x125/0x570
mem_cgroup_out_of_memory+0xb5/0xd0
try_charge+0x720/0x770
mem_cgroup_try_charge+0x86/0x180
mem_cgroup_try_charge_delay+0x1c/0x40
do_anonymous_page+0xb5/0x390
handle_mm_fault+0xc4/0x1f0
This is because thousands of processes are in the OOM cgroup, it takes a
long time to traverse all of them. As a result, this lead to soft lockup
in the OOM process.
To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks'
function per 1000 iterations. For global OOM, call
'touch_softlockup_watchdog' per 1000 iterations to avoid this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-blk: don't keep queue frozen during system suspend
Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.
block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().
[1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/
Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Have process_string() also allow arrays
In order to catch a common bug where a TRACE_EVENT() TP_fast_assign()
assigns an address of an allocated string to the ring buffer and then
references it in TP_printk(), which can be executed hours later when the
string is free, the function test_event_printk() runs on all events as
they are registered to make sure there's no unwanted dereferencing.
It calls process_string() to handle cases in TP_printk() format that has
"%s". It returns whether or not the string is safe. But it can have some
false positives.
For instance, xe_bo_move() has:
TP_printk("move_lacks_source:%s, migrate object %p [size %zu] from %s to %s device_id:%s",
__entry->move_lacks_source ? "yes" : "no", __entry->bo, __entry->size,
xe_mem_type_to_name[__entry->old_placement],
xe_mem_type_to_name[__entry->new_placement], __get_str(device_id))
Where the "%s" references into xe_mem_type_to_name[]. This is an array of
pointers that should be safe for the event to access. Instead of flagging
this as a bad reference, if a reference points to an array, where the
record field is the index, consider it safe. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: set ATTR_CTIME flags when setting mtime
David reported that the new warning from setattr_copy_mgtime is coming
like the following.
[ 113.215316] ------------[ cut here ]------------
[ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 113.234797] Call Trace:
[ 113.235116] <TASK>
[ 113.235393] ? __warn+0x73/0xd0
[ 113.235802] ? setattr_copy+0x1ee/0x200
[ 113.236299] ? report_bug+0xf3/0x1e0
[ 113.236757] ? handle_bug+0x4d/0x90
[ 113.237202] ? exc_invalid_op+0x13/0x60
[ 113.237689] ? asm_exc_invalid_op+0x16/0x20
[ 113.238185] ? setattr_copy+0x1ee/0x200
[ 113.238692] btrfs_setattr+0x80/0x820 [btrfs]
[ 113.239285] ? get_stack_info_noinstr+0x12/0xf0
[ 113.239857] ? __module_address+0x22/0xa0
[ 113.240368] ? handle_ksmbd_work+0x6e/0x460 [ksmbd]
[ 113.240993] ? __module_text_address+0x9/0x50
[ 113.241545] ? __module_address+0x22/0xa0
[ 113.242033] ? unwind_next_frame+0x10e/0x920
[ 113.242600] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 113.243268] notify_change+0x2c2/0x4e0
[ 113.243746] ? stack_depot_save_flags+0x27/0x730
[ 113.244339] ? set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.244993] set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.245613] ? process_scheduled_works+0xbe/0x310
[ 113.246181] ? worker_thread+0x100/0x240
[ 113.246696] ? kthread+0xc8/0x100
[ 113.247126] ? ret_from_fork+0x2b/0x40
[ 113.247606] ? ret_from_fork_asm+0x1a/0x30
[ 113.248132] smb2_set_info+0x63f/0xa70 [ksmbd]
ksmbd is trying to set the atime and mtime via notify_change without also
setting the ctime. so This patch add ATTR_CTIME flags when setting mtime
to avoid a warning. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: hugetlb: independent PMD page table shared count
The folio refcount may be increased unexpectly through try_get_folio() by
caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount
to check whether a pmd page table is shared. The check is incorrect if
the refcount is increased by the above caller, and this can cause the page
table leaked:
BUG: Bad page state in process sh pfn:109324
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324
flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff)
page_type: f2(table)
raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000
raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000
page dumped because: nonzero mapcount
...
CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7
Tainted: [B]=BAD_PAGE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
dump_stack+0x18/0x28
bad_page+0x8c/0x130
free_page_is_bad_report+0xa4/0xb0
free_unref_page+0x3cc/0x620
__folio_put+0xf4/0x158
split_huge_pages_all+0x1e0/0x3e8
split_huge_pages_write+0x25c/0x2d8
full_proxy_write+0x64/0xd8
vfs_write+0xcc/0x280
ksys_write+0x70/0x110
__arm64_sys_write+0x24/0x38
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
The issue may be triggered by damon, offline_page, page_idle, etc, which
will increase the refcount of page table.
1. The page table itself will be discarded after reporting the
"nonzero mapcount".
2. The HugeTLB page mapped by the page table miss freeing since we
treat the page table as shared and a shared page table will not be
unmapped.
Fix it by introducing independent PMD page table shared count. As
described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390
gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv
pmds, so we can reuse the field as pt_share_count. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: megaraid_sas: Fix for a potential deadlock
This fixes a 'possible circular locking dependency detected' warning
CPU0 CPU1
---- ----
lock(&instance->reset_mutex);
lock(&shost->scan_mutex);
lock(&instance->reset_mutex);
lock(&shost->scan_mutex);
Fix this by temporarily releasing the reset_mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
The driver, through the SAS transport, exposes a sysfs interface to
enable/disable PHYs in a controller/expander setup. When multiple PHYs
are disabled and enabled in rapid succession, the persistent and current
config pages related to SAS IO unit/SAS Expander pages could get
corrupted.
Use separate memory for each config request. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new()
When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex
before returning the error.
Fixes smatch warning:
drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs_common: must not hold RCU while calling nfsd_file_put_local
Move holding the RCU from nfs_to_nfsd_file_put_local to
nfs_to_nfsd_net_put. It is the call to nfs_to->nfsd_serv_put that
requires the RCU anyway (the puts for nfsd_file and netns were
combined to avoid an extra indirect reference but that
micro-optimization isn't possible now).
This fixes xfstests generic/013 and it triggering:
"Voluntary context switch within RCU read-side critical section!"
[ 143.545738] Call Trace:
[ 143.546206] <TASK>
[ 143.546625] ? show_regs+0x6d/0x80
[ 143.547267] ? __warn+0x91/0x140
[ 143.547951] ? rcu_note_context_switch+0x496/0x5d0
[ 143.548856] ? report_bug+0x193/0x1a0
[ 143.549557] ? handle_bug+0x63/0xa0
[ 143.550214] ? exc_invalid_op+0x1d/0x80
[ 143.550938] ? asm_exc_invalid_op+0x1f/0x30
[ 143.551736] ? rcu_note_context_switch+0x496/0x5d0
[ 143.552634] ? wakeup_preempt+0x62/0x70
[ 143.553358] __schedule+0xaa/0x1380
[ 143.554025] ? _raw_spin_unlock_irqrestore+0x12/0x40
[ 143.554958] ? try_to_wake_up+0x1fe/0x6b0
[ 143.555715] ? wake_up_process+0x19/0x20
[ 143.556452] schedule+0x2e/0x120
[ 143.557066] schedule_preempt_disabled+0x19/0x30
[ 143.557933] rwsem_down_read_slowpath+0x24d/0x4a0
[ 143.558818] ? xfs_efi_item_format+0x50/0xc0 [xfs]
[ 143.559894] down_read+0x4e/0xb0
[ 143.560519] xlog_cil_commit+0x1b2/0xbc0 [xfs]
[ 143.561460] ? _raw_spin_unlock+0x12/0x30
[ 143.562212] ? xfs_inode_item_precommit+0xc7/0x220 [xfs]
[ 143.563309] ? xfs_trans_run_precommits+0x69/0xd0 [xfs]
[ 143.564394] __xfs_trans_commit+0xb5/0x330 [xfs]
[ 143.565367] xfs_trans_roll+0x48/0xc0 [xfs]
[ 143.566262] xfs_defer_trans_roll+0x57/0x100 [xfs]
[ 143.567278] xfs_defer_finish_noroll+0x27a/0x490 [xfs]
[ 143.568342] xfs_defer_finish+0x1a/0x80 [xfs]
[ 143.569267] xfs_bunmapi_range+0x4d/0xb0 [xfs]
[ 143.570208] xfs_itruncate_extents_flags+0x13d/0x230 [xfs]
[ 143.571353] xfs_free_eofblocks+0x12e/0x190 [xfs]
[ 143.572359] xfs_file_release+0x12d/0x140 [xfs]
[ 143.573324] __fput+0xe8/0x2d0
[ 143.573922] __fput_sync+0x1d/0x30
[ 143.574574] nfsd_filp_close+0x33/0x60 [nfsd]
[ 143.575430] nfsd_file_free+0x96/0x150 [nfsd]
[ 143.576274] nfsd_file_put+0xf7/0x1a0 [nfsd]
[ 143.577104] nfsd_file_put_local+0x18/0x30 [nfsd]
[ 143.578070] nfs_close_local_fh+0x101/0x110 [nfs_localio]
[ 143.579079] __put_nfs_open_context+0xc9/0x180 [nfs]
[ 143.580031] nfs_file_clear_open_context+0x4a/0x60 [nfs]
[ 143.581038] nfs_file_release+0x3e/0x60 [nfs]
[ 143.581879] __fput+0xe8/0x2d0
[ 143.582464] __fput_sync+0x1d/0x30
[ 143.583108] __x64_sys_close+0x41/0x80
[ 143.583823] x64_sys_call+0x189a/0x20d0
[ 143.584552] do_syscall_64+0x64/0x170
[ 143.585240] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 143.586185] RIP: 0033:0x7f3c5153efd7 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Fix dtl_access_lock to be a rw_semaphore
The dtl_access_lock needs to be a rw_sempahore, a sleeping lock, because
the code calls kmalloc() while holding it, which can sleep:
# echo 1 > /proc/powerpc/vcpudispatch_stats
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:337
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 199, name: sh
preempt_count: 1, expected: 0
3 locks held by sh/199:
#0: c00000000a0743f8 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x324/0x438
#1: c0000000028c7058 (dtl_enable_mutex){+.+.}-{3:3}, at: vcpudispatch_stats_write+0xd4/0x5f4
#2: c0000000028c70b8 (dtl_access_lock){+.+.}-{2:2}, at: vcpudispatch_stats_write+0x220/0x5f4
CPU: 0 PID: 199 Comm: sh Not tainted 6.10.0-rc4 #152
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
dump_stack_lvl+0x130/0x148 (unreliable)
__might_resched+0x174/0x410
kmem_cache_alloc_noprof+0x340/0x3d0
alloc_dtl_buffers+0x124/0x1ac
vcpudispatch_stats_write+0x2a8/0x5f4
proc_reg_write+0xf4/0x150
vfs_write+0xfc/0x438
ksys_write+0x88/0x148
system_call_exception+0x1c4/0x5a0
system_call_common+0xf4/0x258 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: Fix hardware lockup on first Rx endpoint request
There is a possibility that a request's callback could be invoked from
usb_ep_queue() (call trace below, supplemented with missing calls):
req->complete from usb_gadget_giveback_request
(drivers/usb/gadget/udc/core.c:999)
usb_gadget_giveback_request from musb_g_giveback
(drivers/usb/musb/musb_gadget.c:147)
musb_g_giveback from rxstate
(drivers/usb/musb/musb_gadget.c:784)
rxstate from musb_ep_restart
(drivers/usb/musb/musb_gadget.c:1169)
musb_ep_restart from musb_ep_restart_resume_work
(drivers/usb/musb/musb_gadget.c:1176)
musb_ep_restart_resume_work from musb_queue_resume_work
(drivers/usb/musb/musb_core.c:2279)
musb_queue_resume_work from musb_gadget_queue
(drivers/usb/musb/musb_gadget.c:1241)
musb_gadget_queue from usb_ep_queue
(drivers/usb/gadget/udc/core.c:300)
According to the docstring of usb_ep_queue(), this should not happen:
"Note that @req's ->complete() callback must never be called from within
usb_ep_queue() as that can create deadlock situations."
In fact, a hardware lockup might occur in the following sequence:
1. The gadget is initialized using musb_gadget_enable().
2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an
interrupt.
3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an
empty queue (next_request() returns NULL). The interrupt flag has
already been cleared by the glue layer handler, but the RXPKTRDY flag
remains set.
4. The first request is enqueued using usb_ep_queue(), leading to the call
of req->complete(), as shown in the call trace above.
5. If the callback enables IRQs and another packet is waiting, step (3)
repeats. The request queue is empty because usb_g_giveback() removes the
request before invoking the callback.
6. The endpoint remains locked up, as the interrupt triggered by hardware
setting the RXPKTRDY flag has been handled, but the flag itself remains
set.
For this scenario to occur, it is only necessary for IRQs to be enabled at
some point during the complete callback. This happens with the USB Ethernet
gadget, whose rx_complete() callback calls netif_rx(). If called in the
task context, netif_rx() disables the bottom halves (BHs). When the BHs are
re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The
gadget itself is initialized at module load (or at boot if built-in), but
the first request is enqueued when the network interface is brought up,
triggering rx_complete() in the task context via ioctl(). If a packet
arrives while the interface is down, it can prevent the interface from
receiving any further packets from the USB host.
The situation is quite complicated with many parties involved. This
particular issue can be resolved in several possible ways:
1. Ensure that callbacks never enable IRQs. This would be difficult to
enforce, as discovering how netif_rx() interacts with interrupts was
already quite challenging and u_ether is not the only function driver.
Similar "bugs" could be hidden in other drivers as well.
2. Disable MUSB interrupts in musb_g_giveback() before calling the callback
and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(),
for example). This would ensure that MUSB interrupts are not handled
during the callback, even if IRQs are enabled. In fact, it would allow
IRQs to be enabled when releasing the lock. However, this feels like an
inelegant hack.
3. Modify the interrupt handler to clear the RXPKTRDY flag if the request
queue is empty. While this approach also feels like a hack, it wastes
CPU time by attempting to handle incoming packets when the software is
not ready to process them.
4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart().
This ensures that the hardware can receive packets when there is at
least one request in the queue. Once I
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: initialize close_work early to avoid warning
We encountered a warning that close_work was canceled before
initialization.
WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0
Workqueue: events smc_lgr_terminate_work [smc]
RIP: 0010:__flush_work+0x19e/0x1b0
Call Trace:
? __wake_up_common+0x7a/0x190
? work_busy+0x80/0x80
__cancel_work_timer+0xe3/0x160
smc_close_cancel_work+0x1a/0x70 [smc]
smc_close_active_abort+0x207/0x360 [smc]
__smc_lgr_terminate.part.38+0xc8/0x180 [smc]
process_one_work+0x19e/0x340
worker_thread+0x30/0x370
? process_one_work+0x340/0x340
kthread+0x117/0x130
? __kthread_cancel_work+0x50/0x50
ret_from_fork+0x22/0x30
This is because when smc_close_cancel_work is triggered, e.g. the RDMA
driver is rmmod and the LGR is terminated, the conn->close_work is
flushed before initialization, resulting in WARN_ON(!work->func).
__smc_lgr_terminate | smc_connect_{rdma|ism}
-------------------------------------------------------------
| smc_conn_create
| \- smc_lgr_register_conn
for conn in lgr->conns_all |
\- smc_conn_kill |
\- smc_close_active_abort |
\- smc_close_cancel_work |
\- cancel_work_sync |
\- __flush_work |
(close_work) |
| smc_close_init
| \- INIT_WORK(&close_work)
So fix this by initializing close_work before establishing the
connection. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
The udelay(5) is not enough, sometimes below kernel panic
still be triggered:
[ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1
[ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT)
[ 4.012985] Call trace:
[...]
[ 4.013029] arm64_serror_panic+0x64/0x70
[ 4.013034] do_serror+0x3c/0x70
[ 4.013039] el1h_64_error_handler+0x30/0x54
[ 4.013046] el1h_64_error+0x64/0x68
[ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48
[ 4.013059] __genpd_runtime_resume+0x30/0x80
[ 4.013066] genpd_runtime_resume+0x114/0x29c
[ 4.013073] __rpm_callback+0x48/0x1e0
[ 4.013079] rpm_callback+0x68/0x80
[ 4.013084] rpm_resume+0x3bc/0x6a0
[ 4.013089] __pm_runtime_resume+0x50/0x9c
[ 4.013095] pm_runtime_get_suppliers+0x60/0x8c
[ 4.013101] __driver_probe_device+0x4c/0x14c
[ 4.013108] driver_probe_device+0x3c/0x120
[ 4.013114] __driver_attach+0xc4/0x200
[ 4.013119] bus_for_each_dev+0x7c/0xe0
[ 4.013125] driver_attach+0x24/0x30
[ 4.013130] bus_add_driver+0x110/0x240
[ 4.013135] driver_register+0x68/0x124
[ 4.013142] __platform_driver_register+0x24/0x30
[ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma]
[ 4.013163] do_one_initcall+0x60/0x1e0
[ 4.013168] do_init_module+0x5c/0x21c
[ 4.013175] load_module+0x1a98/0x205c
[ 4.013181] init_module_from_file+0x88/0xd4
[ 4.013187] __arm64_sys_finit_module+0x258/0x350
[ 4.013194] invoke_syscall.constprop.0+0x50/0xe0
[ 4.013202] do_el0_svc+0xa8/0xe0
[ 4.013208] el0_svc+0x3c/0x140
[ 4.013215] el0t_64_sync_handler+0x120/0x12c
[ 4.013222] el0t_64_sync+0x190/0x194
[ 4.013228] SMP: stopping secondary CPUs
The correct way is to wait handshake, but it needs BUS clock of
BLK-CTL be enabled, which is in separate driver. So delay is the
only option here. The udelay(10) is a data got by experiment. |
