| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfs4_file refcount leak in nfsd_get_dir_deleg()
Claude pointed out that there is a nfs4_file refcount leak in
nfsd_get_dir_deleg(). Ensure that the reference to "fp" is released
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9903: Fix potential memory leak in tw9903_probe()
In one of the error paths in tw9903_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
rnbd-srv: Zero the rsp buffer before using it
Before using the data buffer to send back the response message, zero it
completely. This prevents any stray bytes to be picked up by the client
side when there the message is exchanged between different protocol
versions. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx25821: Fix a resource leak in cx25821_dev_setup()
Add release_mem_region() if ioremap() fails to release the memory
region obtained by cx25821_get_resources(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sysfs: fix chip removal with GPIOs exported over sysfs
Currently if we export a GPIO over sysfs and unbind the parent GPIO
controller, the exported attribute will remain under /sys/class/gpio
because once we remove the parent device, we can no longer associate the
descriptor with it in gpiod_unexport() and never drop the final
reference.
Rework the teardown code: provide an unlocked variant of
gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken
before unregistering the parent device itself. This is done to prevent
any new exports happening before we unregister the device completely. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ccs: Avoid possible division by zero
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ioc32: stop speculation on the drm_compat_ioctl path
The drm compat ioctl path takes a user controlled pointer, and then
dereferences it into a table of function pointers, the signature method
of spectre problems. Fix this up by calling array_index_nospec() on the
index to the function pointer list. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix stack out-of-bounds read in init_card
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stack.
A USB device with a product name containing many non-ASCII, non-space
characters (e.g. multibyte UTF-8) will reliably trigger this as follows:
BUG: KASAN: stack-out-of-bounds in copy_valid_id_string
sound/core/init.c:696 [inline]
BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c
sound/core/init.c:718
The off-by-one has been present since commit bafeee5b1f8d ("ALSA:
snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1),
which first introduced this whitespace-stripping loop. The original
code never accounted for the null terminator when bounding the copy.
Fix this by changing the loop bound to `sizeof(card->id) - 1`,
ensuring at least one byte remains as the null terminator. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix WARNING in usb_tx_block
The function usb_tx_block() submits cardp->tx_urb without ensuring that
any previous transmission on this URB has completed. If a second call
occurs while the URB is still active (e.g. during rapid firmware loading),
usb_submit_urb() detects the active state and triggers a warning:
'URB submitted while active'.
Fix this by enforcing serialization: call usb_kill_urb() before
submitting the new request. This ensures the URB is idle and safe to reuse. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate user queue size constraints
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
APEI/GHES: ARM processor Error: don't go past allocated memory
If the BIOS generates a very small ARM Processor Error, or
an incomplete one, the current logic will fail to deferrence
err->section_length
and
ctx_info->size
Add checks to avoid that. With such changes, such GHESv2
records won't cause OOPSes like this:
[ 1.492129] Internal error: Oops: 0000000096000005 [#1] SMP
[ 1.495449] Modules linked in:
[ 1.495820] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.18.0-rc1-00017-gabadcc3553dd-dirty #18 PREEMPT
[ 1.496125] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
[ 1.496433] Workqueue: kacpi_notify acpi_os_execute_deferred
[ 1.496967] pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 1.497199] pc : log_arm_hw_error+0x5c/0x200
[ 1.497380] lr : ghes_handle_arm_hw_error+0x94/0x220
0xffff8000811c5324 is in log_arm_hw_error (../drivers/ras/ras.c:75).
70 err_info = (struct cper_arm_err_info *)(err + 1);
71 ctx_info = (struct cper_arm_ctx_info *)(err_info + err->err_info_num);
72 ctx_err = (u8 *)ctx_info;
73
74 for (n = 0; n < err->context_info_num; n++) {
75 sz = sizeof(struct cper_arm_ctx_info) + ctx_info->size;
76 ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + sz);
77 ctx_len += sz;
78 }
79
and similar ones while trying to access section_length on an
error dump with too small size.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: pruss: Fix double free in pruss_clk_mux_setup()
In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly
calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)
on the error path. However, after the devm_add_action_or_reset()
returns, the of_node_put(clk_mux_np) is called again, causing a double
free.
Fix by returning directly, to avoid the duplicate of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions
struct configfs_item_operations callbacks are defined like the following:
int (*allow_link)(struct config_item *src, struct config_item *target);
void (*drop_link)(struct config_item *src, struct config_item *target);
While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify
the parameters in the correct order, pci_primary_epc_epf_unlink() and
pci_secondary_epc_epf_unlink() specify the parameters in the wrong order,
leading to the below kernel crash when using the unlink command in
configfs:
Unable to handle kernel paging request at virtual address 0000000300000857
Mem abort info:
...
pc : string+0x54/0x14c
lr : vsnprintf+0x280/0x6e8
...
string+0x54/0x14c
vsnprintf+0x280/0x6e8
vprintk_default+0x38/0x4c
vprintk+0xc4/0xe0
pci_epf_unbind+0xdc/0x108
configfs_unlink+0xe0/0x208+0x44/0x74
vfs_unlink+0x120/0x29c
__arm64_sys_unlinkat+0x3c/0x90
invoke_syscall+0x48/0x134
do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0
[mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vt8500lcdfb: fix missing dma_free_coherent()
fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not
freed if the error path is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
minix: Add required sanity checking to minix_check_superblock()
The fs/minix implementation of the minix filesystem does not currently
support any other value for s_log_zone_size than 0. This is also the
only value supported in util-linux; see mkfs.minix.c line 511. In
addition, this patch adds some sanity checking for the other minix
superblock fields, and moves the minix_blocks_needed() checks for the
zmap and imap also to minix_check_super_block().
This also closes a related syzbot bug report. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ... |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not pass flow_id to set_rps_cpu()
Blamed commit made the assumption that the RPS table for each receive
queue would have the same size, and that it would not change.
Compute flow_id in set_rps_cpu(), do not assume we can use the value
computed by get_rps_cpu(). Otherwise we risk out-of-bound access
and/or crashes. |
