Search

Search Results (417953 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-80343 2026-10-19 8.2 High
Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding.
CVE-2026-80312 2026-10-19 8.2 High
Improper Authentication vulnerability in Apache Camel OAuth component. This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-oauth processors that guard a route did not stop the exchange when authentication could not be completed. Where a failure to establish an authenticated session should have terminated routing and returned an error to the caller, the processors fell through and returned control to the route, so the request continued to the protected endpoint as though authentication had succeeded. The effect is a fail-open authentication guard: an unauthenticated caller reached whatever the route did next. The condition is reached on the ordinary request path of a route configured to require OAuth, and needs no special configuration or prior access on the caller's part. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The processors now stop the exchange and set the appropriate error status whenever an authenticated session cannot be established, so a failed authentication no longer reaches the protected part of the route. For deployments that cannot upgrade immediately, place an explicit authorization check after the OAuth processor rather than relying on it to halt the exchange, and verify that the route stops on failure.
CVE-2026-79986 2026-10-19 7.4 High
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.
CVE-2024-2182 1 Redhat 3 Enterprise Linux, Openshift, Openstack 2026-10-19 6.5 Medium
A flaw was found in the Open Virtual Network (OVN). In OVN clusters where BFD is used between hypervisors for high availability, an attacker can inject specially crafted BFD packets from inside unprivileged workloads, including virtual machines or containers, that can trigger a denial of service.
CVE-2026-19654 2 Redhat, Rsyslog 6 Enterprise Linux, Enterprise Linux Eus, Rhel E4s and 3 more 2026-10-19 7.5 High
A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected.
CVE-2026-99999 1 Linux 1 Linux Kernel 2026-10-19 9.3 Critical
In the Linux kernel, the following vulnerability has been resolved: ipv4: validate checksum_start before completing checksum If a packet with bad checksum metadata gets into the ipv4 stack, skb_checksum_help can corrupt the network header and cause a bunch of mischief. This was discovered and reported by Paulos, and has been reporoduced by others independently since. We really shouldn't allow such packets in, but as a defence in depth measure, let's also check before we complete the checksum. A more complete validation at input is forthcoming, but needs more work.
CVE-2026-98433 1 Linux 1 Linux Kernel 2026-10-19 2.5 Low
In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure In kvmppc_svm_page_in(), if uv_page_in() fails after kvmppc_uvmem_get_page() has succeeded, the secure device page is never released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap, allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets refcount=1 and locks the page. The subsequent goto out_finalize skips the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the page, and none of those resources are ever reclaimed. Each occurrence permanently consumes one entry from the firmware-bounded secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN marked as secure — making it unusable for the lifetime of the VM. The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out() failure correctly with unlock_page(dpage); __free_page(dpage). Apply the same pattern here: unlock_page() followed by put_page(), which chains through free_zone_device_folio() into kvmppc_uvmem_folio_free() to clear the bitmap bit, free pvt, and reset the GFN state. Reachable whenever uv_page_in() returns an error (e.g. UV pool exhaustion) on any POWER9/10 + Ultravisor/PEF system.
CVE-2026-94229 2026-10-19 5.3 Medium
The TrueBooker WordPress plugin before 1.3.0 does not verify that the requester owns a booking before rendering its confirmation summary, allowing unauthenticated attackers to enumerate booking identifiers and retrieve the personal information of customers who booked an appointment, as well as invalidate the customer's own confirmation link.
CVE-2026-91046 2026-10-19 4.3 Medium
The ElementsReady Addons for Elementor WordPress plugin through 6.7.2 does not perform authorization checks that halt execution in several of its settings-save handlers, allowing users with subscriber-level access and above to overwrite the ElementsReady Addons for Elementor WordPress plugin through 6.7.2's stored settings, including its stored API credentials and its feature and template configuration.
CVE-2026-86791 2026-10-19 5.3 Medium
The iPOSpays Payment Gateway for WooCommerce WordPress plugin before 1.4.7 does not verify that a payment was actually completed before recording an order as paid, allowing unauthenticated users to mark any unpaid order as paid and to rewrite its total.
CVE-2026-74921 2026-10-19 6.8 Medium
The Document Gallery WordPress plugin through 5.1.1 does not sanitise or escape several gallery shortcode attributes before embedding them in a single-quoted HTML attribute in the rendered gallery markup, allowing users with the Contributor role and above to inject arbitrary event handlers that execute when a higher privileged user views the content.
CVE-2026-106933 2026-10-19 6.8 Medium
The Blaze Demo Importer WordPress plugin before 1.0.17 does not sanitize uploaded SVG files and registers the SVG MIME type for the WordPress media library unconditionally, allowing authenticated users with the Author role or higher to upload a crafted SVG that executes arbitrary JavaScript in the browser of any user who opens the file.
CVE-2026-79985 2026-10-19 7.4 High
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel SMB component. This issue affects Apache Camel: from 4.2.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the smb scheme. Its consumer walks the share listing on its own rather than through RemoteFileConsumer, skipping only the exact "." and ".." entries, so a name carrying traversal segments in any other form was concatenated unchecked. Reaching it requires a server that emits a listing name which is not a single path segment, which a conforming SMB2 implementation does not do; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.
CVE-2026-79984 2026-10-19 7.4 High
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Mina SFTP component. This issue affects Apache Camel: from 4.18.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the mina-sftp scheme, an alternative SFTP implementation whose consumer derives from the same RemoteFileConsumer base class and therefore inherited the same unconstrained resolution. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.
CVE-2026-112104 1 Eremef 1 Bandcamp-player 2026-10-19 7.3 High
A flaw has been found in eremef bandcamp-player up to 1.8.33-beta. The impacted element is an unknown function of the file database.ts of the component Remote Control Server. Executing a manipulation of the argument remoteEnabled can lead to missing authentication. The attack may be launched remotely. Upgrading to version 1.8.34-beta is sufficient to resolve this issue. This patch is called ccba99b66bc61acf46e4a332034799d7452ddea6. Upgrading the affected component is advised.
CVE-2026-97348 2 Gpriday, Wordpress-extensions 2 Siteorigin Widgets Bundle, Siteorigin Widgets Bundle 2026-10-19 6.5 Medium
The SiteOrigin Widgets Bundle plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.74.3 via the get_instance_css function. This makes it possible for authenticated attackers, with contributor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. The widget's normal update()/sanitize_field_input() pipeline — which would reject non-hex color values — is bypassed entirely because the [siteorigin_widget] shortcode handler calls $the_widget->widget() directly on the attacker-supplied decoded JSON instance.
CVE-2026-79983 2026-10-19 7.4 High
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.
CVE-2026-78165 2026-10-19 8.8 High
Deserialization of Untrusted Data vulnerability in Apache Camel Spring Redis component. This issue affects Apache Camel: from 2.11.0 before 4.18.5, from 4.19.0 before 4.22.1. RedisConfiguration.getSerializer lazily built a bare JdkSerializationRedisSerializer whenever no serializer option was configured, and that instance was used for every read the component performs. Spring's implementation delegates through DeserializingConverter to DefaultDeserializer, which reads the bytes with a ConfigurableObjectInputStream and installs no java.io.ObjectInputFilter on the stream, so an arbitrary serialized class graph was materialised and its readObject method executed. RedisConsumer.setBody applied that serializer to the raw bytes of every message published to the subscribed channels, before the Exchange was constructed and therefore before any route logic could inspect the message, so an actor able to issue PUBLISH on a subscribed channel reached the deserialization sink directly. The same default serializer backed the RedisTemplate built by RedisConfiguration.createDefaultTemplate, so the producer read commands GET, HGET, HGETALL and HVALS deserialized whatever was stored in the Redis keyspace, and SpringRedisIdempotentRepository shared that template. Configuring a custom redisTemplate did not close the consumer path, because RedisConsumer.setBody reads getSerializer directly rather than the serializer attached to the template, so a deployment that had wired a String serializer into its own template remained exposed on the consumer side unless it also set the serializer option. The component never constructed a java.io.ObjectInputStream itself, which is why earlier passes over the Camel codebase for unfiltered Java deserialization did not reach it. The behaviour dates back to the introduction of the component, first released in 2.11.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, set the JVM-wide jdk.serialFilter system property, which the affected code path honours because it reads through a java.io.ObjectInputStream, for example -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!* ; or set the serializer endpoint option to a serializer that does not use Java serialization, such as StringRedisSerializer, noting that this must be set as the serializer option and not only on a custom redisTemplate. As defence in depth, require authentication on the Redis instance and restrict which clients may publish to the subscribed channels, and do not expose a Redis instance consumed by Camel to untrusted networks.
CVE-2026-78163 2026-10-19 5.9 Medium
Server-Side Request Forgery (SSRF), Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.1. DoclingProducer decided what a String message body meant by inspecting its prefix. A body starting with http:// or https:// was handed to Docling as a remote URL to fetch, a body starting with / or containing a backslash was read from the local filesystem, and anything else was written to a temporary file and converted as document content. The mode was chosen implicitly and no endpoint option allowed a route author to pin the component to a single interpretation, so a route that means convert whatever text arrives in the body silently became a fetcher of remote resources or a reader of local files whenever the text happened to begin with one of those prefixes. The only guard applied to the derived value was a size check, and that check was wrapped in an existence test, so a path that resolved to nothing, or to a pseudo-file reporting a size of zero, passed without being checked at all. Five call sites reached the two sinks: the CLI mode appended the value as the final positional argument of the docling subprocess, and the docling-serve mode passed it either to HttpSource for the backend to fetch or to Files.readAllBytes so that the content could be base64-encoded and uploaded. Because the exchange body is never filtered by a HeaderFilterStrategy, unlike the Camel header namespace, a sender able to place text in a message that a route forwards into a docling endpoint could reach both sinks without any opt-in from the deployment. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, do not route message bodies that originate outside the deployment into a docling endpoint, and pass the document through a typed body such as File, byte[] or InputStream, or through the CamelDoclingInputFilePath header, so that the body is never subject to prefix interpretation.
CVE-2026-78162 2026-10-19 N/A
Deserialization of Untrusted Data vulnerability in Apache Camel. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!* and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.