Export limit exceeded: 417953 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417953 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98563 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phylink: record the PHY only once bringup cannot fail phylink_bringup_phy() stores the PHY in pl->phydev before its last fallible step: on a MAC whose phylink ops implement LPI, phy_eee_rx_clock_stop() can fail with a real MDIO error. The callers unwind with phy_detach(), which knows nothing about pl->phydev, so a pointer to a PHY that is no longer attached outlives the failed connect. What that costs depends on how the caller got here. phylink_connect_phy() goes through phylink_attach_phy(), which refuses to attach while pl->phydev is set, turning a transient MDIO error into a permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy() answers the failure with phy_device_remove() and phy_device_free(), and it assigns sfp->mod_phy only past that error return, so nothing clears pl->phydev and it is left pointing at a freed phy_device that phylink_resolve() and the ethtool helpers go on reading. phylink_fwnode_phy_connect() has no such check, so a later connect overwrites the stale pointer and hides the problem. A disconnect does not: phylink_disconnect_phy() hands that pointer to phy_disconnect(), and the second phy_detach() on the same PHY drops references the first one already released. Found while making a DSA port survive a PHY whose driver arrives after the switch probes: keeping the port across a failed connect and retrying is what makes this window reachable. Publish the pointer after the last call that can fail instead of unwinding it afterwards. Nothing between the two points reads pl->phydev, and the registration that follows cannot fail: phy_request_interrupt() falls back to polling on its own. The PHY-side state keeps the order it had, so no MDIO operation moves relative to another. | ||||
| CVE-2026-111065 | 1 Aio-libs | 1 Aiohttp | 2026-10-20 | 5.3 Medium |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, Max-Age processing can overflow and skip closing a connection. An attacker can consequently exhaust the connection pool temporarily until garbage collection resolves the connections. This issue is fixed in version 3.14.4. | ||||
| CVE-2026-98688 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL dereference in tb_remove_work() There is a slight race between tb_remove_work() and tb_domain_remove() which leads to dereferencing a NULL tb->root_switch pointer inside tb_free_unplugged_xdomains(): Thread A Thread B tb_remove_work() tb_domain_remove() mutex_lock(&tb->lock) tb_stop() /* doesn't cancel a running callback */ cancel_delayed_work(&tcm->remove_work) ... tb_switch_remove(tb->root_switch) tb->root_switch = NULL mutex_unlock(&tb->lock) mutex_lock(&tb->lock) ... /* without checking ->root_switch */ tb_free_unplugged_xdomains(tb->root_switch) mutex_unlock(&tb->lock) Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains() out of the &tb->lock section and the check for tb->root_switch, in particular. It states: For this reason separate removing the XDomain from the topology data structures (where we need the lock) from unregistering the device from the bus (where remove callbacks of the drivers are being called). tb_free_unplugged_xdomains() belongs to the former group of functions requiring the lock. And it also calls tb_xdomain_remove() which should only be called with &tb->lock held. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | ||||
| CVE-2026-109553 | 1 Gitea | 1 Gitea | 2026-10-20 | 7.5 High |
| Gitea resolved the principals of an SSH certificate by searching the content of all stored public keys instead of only principal keys. When Gitea trusts a user certificate authority (`SSH_TRUSTED_USER_CA_KEYS`) and accepts arbitrary principals (`SSH_AUTHORIZED_PRINCIPALS_ALLOW=anything`), a user could register another user's public key line as their own principal, or a holder of a certificate signed by that authority could list it, and then authenticate as the owner of that key through the HTTP signature API and the built-in SSH server. Instances that do not trust a user certificate authority are not affected. | ||||
| CVE-2026-98475 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/cmf: Fix virtual vs physical address confusion The measurement block address is an absolute address. Define the associated schib_config and schib fields as dma64_t to enable automatic detection of incorrect assignments. Also add the missing virt_to_dma64() translation. Without this fix, a wrong address will be used by firmware when storing extended format channel measurement data on kernels built with CONFIG_RANDOMIZE_IDENTITY_BASE=y. | ||||
| CVE-2026-98476 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str() The channel path registry entry associated with a CHPID may be removed while the subchannel's PMCW still references that CHPID. In this case, chpid_to_chp() can return NULL, leading to a NULL pointer dereference. Add the missing NULL check before dereferencing the returned pointer. | ||||
| CVE-2026-98583 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: validate helper command length before pull The firmware download receive path removes the NCI data header and reads the helper command before validating the remaining packet length. A short frame can therefore reach the data access before the malformed packet is rejected. Validate the complete helper command length before stripping the NCI data header. | ||||
| CVE-2026-98494 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read Same issue as atl1c (see the first commit in this series, "net: atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. Treat it as "nothing new to clean" instead. | ||||
| CVE-2026-111889 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-20 | 4.3 Medium |
| phpMyFAQ from 4.1.0 before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains a missing authorization vulnerability in the admin dashboard that allows authenticated users without admin rights to view restricted data. Attackers with any activated account can request /admin/index.php/ to read unpublished FAQ questions, admin edit URLs, recent user identities, and site statistics. | ||||
| CVE-2026-98565 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621 The core and io supplies are only requested for ID_MT7530: both the devm_regulator_get() in probe and the regulator_enable() in mt7530_setup() are guarded by the switch id, but mt7530_remove() disables them unconditionally. On an MT7621 or an MT7531 both pointers are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls regulator_disable() on NULL. | ||||
| CVE-2026-98567 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: xps: reject an out of range traffic class Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc() lowers dev->num_tc without touching either array. netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and netdev_get_prio_tc_map() returns the entry as it stands, so a leftover entry is handed out as a traffic class >= dev->num_tc. Taking that class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a negative one and indexes an XPS map sized for dev->num_tc classes: tci = j * num_tc + tc; RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map); attr_map[] holds nr_ids * num_tc entries and j runs over the ids named in the mask, so a class that is not below num_tc pushes tci past the end of the map for the last ids and the store overruns it. Any caller that lowers num_tc leaves such entries behind, and mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7] still describe txq 1..7. The splat is from an XPS write to txq 2 on a veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and j == 6 stores one past the end of the 88-byte map: BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954) Write of size 8 at addr ffff88813016bc58 by task xps_oob/634 __netif_set_xps_queue (net/core/dev.c:2954) xps_rxqs_store (net/core/net-sysfs.c:1880) netdev_queue_attr_store (net/core/net-sysfs.c:1390) Allocated by task 634: __kmalloc_noprof (mm/slub.c:5439) __netif_set_xps_queue (net/core/dev.c:2937) The buggy address is located 0 bytes to the right of allocated 88-byte region [ffff88813016bc00, ffff88813016bc58) Reject a class the map has no room for. | ||||
| CVE-2026-98561 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfp: hold IPsec RX state under the XArray lock nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the xfrm_state it found. The delete path can erase the entry and drop the last state reference in that interval. RX can then try to increment a zero refcount after the state has been queued for destruction. The driver queues firmware invalidation asynchronously; the delete path does not wait for the command to complete or drain pending RX processing. The XFRM garbage collector waits for an RCU grace period before freeing the state. That delays reclamation but does not make acquiring a reference from zero valid. Take the xfrm_state reference before releasing the XArray lock so xa_erase() cannot run between lookup and reference acquisition. | ||||
| CVE-2026-98582 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate received frame size st21nfca_hci_i2c_repack() trims a received frame at its EOF marker before removing byte stuffing. It then assumes the truncated frame contains the LLC header and two CRC bytes, and it unconditionally reads the byte after an escape marker. A malformed frame can place EOF immediately after the start marker or can end its data portion with an escape marker. The former leaves too few bytes for check_crc(), while the latter makes the unstuffing loop read past the current skb length. Require the minimum framing bytes both before and after unstuffing. Use separate input and output cursors while removing byte stuffing, and reject an escape marker without its encoded byte. This keeps malformed frames within the received frame boundary before CRC processing. | ||||
| CVE-2026-98621 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: gue: reject invalid REMCSUM offsets The REMCSUM option carries an absolute checksum start and checksum field offset. gue_remcsum() passes them to skb_remcsum_process(), whose partial path stores offset - start in the u16 skb->csum_offset variable. If offset is less than start, this underflows. A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM driver which trusts the metadata, leading skb_copy_and_csum_dev() to write two bytes about 64 KiB beyond the destination buffer. Reject reversed tuples in validate_gue_flags(), after the existing length validation, so all GUE parsers enforce the ordering in one place. | ||||
| CVE-2026-98645 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: winwing: fix use-after-free in force feedback teardown winwing_init_ff() passes the driver's private data, allocated with devm_kzalloc() in winwing_probe(), as the effect context to input_ff_create_memless(). The memoryless force-feedback core takes ownership of that pointer and frees it with kfree() from input_ff_destroy() (ml_ff_destroy()) when the input device is destroyed. Freeing a devm-managed allocation with kfree() is an invalid free, and the same object is then released again by devres when the HID device is torn down, a double free. As the allocation also embeds the LED class devices, their timers and work item live on freed memory and the slab gets corrupted. This triggers on unbind, rmmod, hot-unplug and on system suspend, where the firmware cache walks the now-corrupt devres list. KASAN reports: BUG: KASAN: invalid-free in input_ff_destroy Allocated by task N: winwing_probe Pass NULL as the memless context instead and fetch the driver data from the input device in winwing_play_effect(): the HID core already stores the hid_device as the input device's drvdata. The force-feedback core then owns nothing that it must not free. | ||||
| CVE-2026-109844 | 1 Gitea | 1 Gitea | 2026-10-20 | 4.3 Medium |
| `GET /api/v1/user/subscriptions` returned the metadata of every repository a user was watching without checking that the user still had access to it. A user who watched a private repository while having access, and later lost it, for example through a team permission downgrade, could still read its name, description, clone URLs, owner and counters. The issue was fixed in 1.27.0 and 28.0.0 and disclosed with 28.2.0. | ||||
| CVE-2024-4412 | 1 Wso2 | 12 Identity Server, Wso2 Api Manager, Wso2 Carbon Identity Application Authentication Framework and 9 more | 2026-10-20 | 2.7 Low |
| The software accepts user-supplied data without sufficient validation, allowing for the injection of malicious Expression Language (EL) code. This can lead to the execution of arbitrary operations within the affected deployment. Exploitation of this vulnerability requires administrator privileges. The impact is minimal as EL usage is restricted to certain read operations. | ||||
| CVE-2026-98719 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it Nullify have_run_cpus when freeing the mask, particularly in the error path of __sev_guest_init(), so that KVM doesn't have to subtly use sev->active to track whether or not the mask has been freed. As pointed out by Sashiko, blindly freeing the mask in sev_vm_destroy() results in a double-free if the mask is freed if __sev_guest_init() fails. Throw the logic in a helper as nullifying the pointer is frustratingly difficult and weird due to have_run_cpus being a single-entry array when CPUMASK_OFFSTACK=n. Deliberately don't use CPUMASK_VAR_NULL, as it's not directly assignable when the cpumask is on-stack, e.g. requires using a local variable and a memcpy(), which is beyond ridiculous. Furthermore, while clearing the on-stack bitmask is an unnecessary and arguably unwanted side effect, KVM absolutely relies on '0' being the "null" value given that the struct is zero-allocated. Opportunistically add an alloc() helper to pair with free(); there are just enough call sites to make doing so worthwhile. | ||||
| CVE-2026-98813 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Hold map BTF for the memory allocator destructor record bpf_ma_set_dtor() duplicates map->record so that the bpf_mem_alloc destructor can release the special fields of hash and rhash map elements once the allocator frees them for good. btf_record_dup() only acquires references on kernel and module BTF. Fields whose types live in the map BTF keep pointing into it: a kptr to a local type refers to map->btf, and a list_head or rb_root field carries a value_rec owned by the struct meta table of map->btf. That borrowed state can outlive the map. When RCU callbacks are still in flight, bpf_mem_alloc_destroy() copies the allocator and defers the final drain, together with the destructor context, to a workqueue. bpf_map_free() then frees map->record and drops the map's BTF reference as soon as map_free() returns. Once the program that loaded the BTF is gone as well, the BTF is freed while the worker still uses the duplicate. The worker dereferences it through btf_is_kernel() and btf_find_struct_meta() in bpf_obj_free_fields() when destroying elements that were freed under RCU, and through btf_is_kernel() in btf_record_free() when releasing the context itself: BUG: KASAN: slab-use-after-free in btf_is_kernel+0x19/0x30 Read of size 1 at addr ffff88811505dce8 by task kworker/u16:2/50 Workqueue: events_unbound free_mem_alloc_deferred Call Trace: btf_is_kernel+0x19/0x30 btf_record_free+0xc7/0xf0 htab_dtor_ctx_free+0x1a/0x30 free_mem_alloc_no_barrier+0x39/0x230 free_mem_alloc_deferred+0x2a/0x40 process_scheduled_works+0x5ce/0x9d0 worker_thread+0x42a/0x5e0 kthread+0x1f5/0x230 ret_from_fork+0x1dd/0x390 ret_from_fork_asm+0x1a/0x30 Allocated by task 358: __kmalloc_cache_noprof+0x287/0x510 btf_new_fd+0xf7/0x3d0 __sys_bpf+0x487/0x840 Freed by task 0: kfree+0x186/0x560 rcu_core+0x6f6/0xd40 Freeing a map that still holds more elements than the allocator's high watermark is enough to get there, because the bulk free during teardown queues the RCU callback that makes bpf_mem_alloc_destroy() defer. Non-preallocated hash maps and resizable hash maps both register the destructor and are affected alike. Keep one reference on the map BTF in the destructor context. Every non-kernel pointer in the duplicated record is either map->btf or memory owned by it, so a single reference covers kptrs, list heads, and rb roots, and mirrors what bpf_map_meta_alloc() does for the duplicated record of an inner map. Release it only after the duplicated record has been freed: the worker is preemptible and not in an RCU read-side critical section, so dropping the last reference first would let the BTF be freed while btf_record_free() still reads its fields. | ||||
| CVE-2026-105661 | 1 Gitea | 1 Gitea | 2026-10-20 | 5.3 Medium |
| Requesting `/{username}/-/repositories` for an individual user instead of an organization made the organization home handler dereference a nil organization and panic. The request needs no authentication and no special configuration. The server answered with an HTTP 500 error and logged a panic for each request; the fix returns 404 for individual users. | ||||