| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Validation of Integrity Check Value vulnerability in Apache Camel Crypto PGP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
unmarshal() verified the modification detection code only when the message was an OpenPGP symmetrically encrypted integrity protected data packet. The older symmetrically encrypted data packet carries no such code, and OpenPGP's CFB mode is malleable without one, so a message using that packet skipped the check altogether. The packet type is chosen by whoever produced the message, which left the sender - or anyone able to rewrite the message in transit - deciding whether the integrity check applied at all. The existing integrity option governs marshalling only and had no decrypt-side counterpart, so a deployment could not require integrity protection on the messages it accepted.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A requireIntegrityProtection option, defaulting to true, now rejects a message that is not integrity protected. Note that signatureVerificationOption still defaults to optional, so a message carrying no signature is accepted; the two options together are what give a decrypted message authenticity and not only confidentiality. For deployments that cannot upgrade immediately, reject messages that do not use the integrity protected packet before they reach the data format. Routes that must interoperate with a sender still emitting the legacy packet should set requireIntegrityProtection=false after upgrading, and treat the decrypted content as unauthenticated. |
| Improper Authentication vulnerability in Apache Camel Shiro component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Shiro security processor skipped credential verification when the subject already bound to the current thread carried the same principal as the incoming exchange. Because the thread that carries a Camel exchange is drawn from a pool and reused across exchanges, a subject left bound by an earlier authenticated exchange could satisfy the check for a later one that presented no valid credentials of its own. The password on the incoming exchange was, in that case, never verified. The condition depends on thread reuse and on the principal matching, which is why it is not reached on every request, but it requires nothing of the attacker beyond sending a request naming a principal that is in active use.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The processor now verifies the presented credentials on every exchange rather than accepting a subject already bound to the thread. Setting alwaysReauthenticate=false restores the previous behaviour for deployments that depend on it. For deployments that cannot upgrade immediately, ensure the Shiro subject is cleared from the thread at the end of every exchange so that no subject can be inherited by a later one. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Knative component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When processing of an exchange failed on the consumer side, the Knative HTTP consumer wrote the resulting exception back to the remote caller as the response body, including its class name, message and stack trace. An external sender could therefore provoke a failure and read internal detail about the deployment: class and package names, file system or host names carried in exception messages, and the shape of the route. That detail is useful for building a more targeted attack, and where an exception message embeds configuration or connection strings it is disclosure in its own right. camel-knative was the remaining HTTP-family consumer that had not been aligned with the muteException behaviour established for the other HTTP consumers by CAMEL-23651.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The consumer now honours a muteException option that defaults to true, so a route failure returns an empty body with the error status rather than the exception. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, add an onException handler that sets the response body explicitly, so that the framework never writes the exception back to the caller. |
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset. |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners. |
| Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding. |
| Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components.
Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name. |
| A vulnerability was detected in antoinersx clawhost up to 0.0.45. This affects the function handleRequest of the file apps/clawhostgo/src/main/services/reverseProxy.ts of the component Reverse Proxy. Performing a manipulation of the argument token results in open redirect. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The SCIM endpoint does not sufficiently validate authorization for federated users when performing operations against the local user store. This occurs when a local and a federated user share the same username, allowing a federated user to perform actions intended for a local user, including arbitrary operations.
A malicious actor authenticated as a federated user may perform arbitrary operations on local user accounts via the SCIM 2.0 or SCIM 1.1 endpoints when local and federated users share the same username. This could lead to user account takeover. Deployments that do not support user self-registration are considered medium severity. |
| Frappe Helpdesk before 1.26.0 contains an authorization bypass vulnerability that allows authenticated portal users to create tickets impersonating other customers by supplying a raised_by value. Attackers can call the hd_ticket.api.new endpoint with a victim's email to plant phishing tickets in their portal and read their replies via get_ticket_activities. |
| NocoBase @nocobase/plugin-collection-sql through 2.2.28 contains an SQL injection vulnerability that allows privileged users to store unvalidated SQL by bypassing checkSQL() through the sqlCollection:setFields action. Attackers holding the collection-sql snippet can replace a benign collection query with dangerous statements executed on reload, reading pg_shadow password hashes or calling pg_read_file. |
| The authentication endpoint of WSO2 Identity Server fails to provide a consistent system response when a username does not exist in the system, allowing attackers to differentiate between valid and invalid usernames. This difference in responses can be leveraged to enumerate existing user accounts.
Successful exploitation enables an attacker to discover valid usernames within the system, significantly increasing the risk of subsequent attacks such as brute force attacks on user credentials, social engineering attacks, and information leakage. The discovered usernames can be used to craft targeted phishing emails or other social engineering campaigns. |
| An uncontrolled recursion weakness in the BSON decoding logic of the MongoDB PHP driver may allow an unauthenticated party who can supply crafted binary document data to the decoder to exhaust the process stack. This may cause the PHP process using the driver to terminate unexpectedly, resulting in a loss of availability for that process. The condition occurs below the PHP layer and cannot be intercepted by application-level error handling. |
| This candidate was in a CNA pool that was not assigned to any issues. |
| Missing authentication for critical function vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
The reaction API did not enforce content visibility controls, allowing unauthorized users to read reaction metadata from restricted content or add and remove their own reactions.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Mina component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When processing of an exchange failed, the Mina consumer wrote exchange.getException() straight back over the socket to the remote peer. Over a textline codec that hands the peer the exception's class name and message; over the object codec it hands over the serialised exception, cause chain included. A remote peer able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever a message or nested cause happens to carry, which in practice can include paths, host names and connection detail. The consumer had no option to suppress this, unlike the HTTP-family consumers aligned by CAMEL-23651.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces the route exception with a generic one carrying no class name, message or stack trace, while still writing a reply so that a synchronous peer is not left to time out. Set muteException=false to restore the previous behaviour. For deployments that cannot upgrade immediately, add an onException handler that sets the reply body explicitly, so the framework never writes the exception back to the peer. |
| Exposure of Data Element to Wrong Session vulnerability in Apache Camel Thrift component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Thrift data format unmarshalled incoming data into the shared defaultInstance of the target type rather than into a fresh copy, and returned that shared object as the exchange body. Because the instance is shared process-wide, state written while unmarshalling one message stayed on the object and was visible to every later message that used the same type. Fields absent from a later payload retained the previous message's values, so content belonging to one sender could be read while processing another sender's message, and concurrent exchanges could observe each other's partially written state. In a deployment that serves more than one tenant or user through the same route, that is disclosure of one party's data to another.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Unmarshalling now deserializes into a copy, so each exchange gets its own instance and no state carries between messages. For deployments that cannot upgrade immediately, copy the unmarshalled body into a new instance immediately after the data format runs, and do not retain references to the returned object. |
| Server-Side Request Forgery (SSRF), Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.1.
DoclingProducer decided what a String message body meant by inspecting its prefix. A body starting with http:// or https:// was handed to Docling as a remote URL to fetch, a body starting with / or containing a backslash was read from the local filesystem, and anything else was written to a temporary file and converted as document content. The mode was chosen implicitly and no endpoint option allowed a route author to pin the component to a single interpretation, so a route that means convert whatever text arrives in the body silently became a fetcher of remote resources or a reader of local files whenever the text happened to begin with one of those prefixes. The only guard applied to the derived value was a size check, and that check was wrapped in an existence test, so a path that resolved to nothing, or to a pseudo-file reporting a size of zero, passed without being checked at all. Five call sites reached the two sinks: the CLI mode appended the value as the final positional argument of the docling subprocess, and the docling-serve mode passed it either to HttpSource for the backend to fetch or to Files.readAllBytes so that the content could be base64-encoded and uploaded. Because the exchange body is never filtered by a HeaderFilterStrategy, unlike the Camel header namespace, a sender able to place text in a message that a route forwards into a docling endpoint could reach both sinks without any opt-in from the deployment.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, do not route message bodies that originate outside the deployment into a docling endpoint, and pass the document through a typed body such as File, byte[] or InputStream, or through the CamelDoclingInputFilePath header, so that the body is never subject to prefix interpretation. |
| IBM Concert 1.0 through 3.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. |
| IBM Cloud Pak System 2.3.6.0, and 2.3.6.1 is vulnerable to HTML injection. A remotely authenticated attacker could inject malicious HTML code, which when viewed, would be executed in the victim's Web browser within the security context of the hosting site. |