| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| WebITR developed by Uniong has a Insecure Deserialization vulnerability. Authenticated remote attackers can use the hard-coded cryptographic key to craft and submit malicious serialized data, thereby executing arbitrary code on the server. |
| A vulnerability has been found in aaPanel up to 8.25.0. The affected element is the function ExecShell of the file class/public/common.py of the component File Manager. The manipulation of the argument sfile/dfile/access/user leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor confirms: "The reported RCE and LFI vulnerabilities require authentication." |
| The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated struct osdp_event. For the REPLY_KEYPPAD and REPLY_RAW reply types, the payload length is taken from the received frame and the only validation performed is that the declared length is self-consistent with the number of payload bytes present in the frame. Because the attacker controls both the length field and the frame length, that check imposes no bound, and the subsequent memcpy() writes into the fixed 64-byte data arrays of struct osdp_event_keypress / struct osdp_event_cardread (OSDP_EVENT_MAX_DATALEN). The sibling REPLY_FMT handler in the same switch already carried the missing > OSDP_EVENT_MAX_DATALEN bound.
The defect is reached from cp_process_reply(), which reads bytes from the OSDP RS-485 channel and passes them through osdp_phy_check_packet() and osdp_phy_decode_packet() before dispatching on the reply ID. Triggering it requires CONFIG_OSDP with CONFIG_OSDP_MODE_CP and an application event callback registered (the normal Control Panel integration), plus a frame carrying a correct SOM, a valid CRC-16, and a matching 2-bit sequence number — all of which are computable or observable by anyone on the bus. No check ties the reply ID to the outstanding command, so an oversized REPLY_KEYPPAD or REPLY_RAW is accepted as the answer to a routine CMD_POLL. A malicious or compromised card reader, or anyone with access to the RS-485 wiring, can supply such a frame; CONFIG_OSDP_SC_ENABLED only helps while a secure channel is active, and a single unauthenticated frame carrying a bad MAC causes sc_deactivate(), after which plaintext replies are again accepted.
With the default CONFIG_OSDP_UART_BUFFER_LENGTH of 256, roughly 180 bytes of fully attacker-chosen data can be written past the end of the stack-allocated event object, over saved registers and the return address on typical Cortex-M and RISC-V frame layouts (Zephyr does not enable stack canaries by default). The impact ranges from a hard crash of the access-control panel to potential control-flow hijack in the context of the OSDP receive thread. The fix adds an OSDP_EVENT_MAX_DATALEN bound to both handlers, capping each memcpy() at the size of its destination. |
| The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it.
The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server.
The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel.
The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only. |
| A NULL pointer dereference vulnerability in the license manager service could allow an unauthenticated attacker to crash the service via the on_disconnected callback function. |
| Froxlor from 0.10.0 before 2.3.15 contains a missing authorization vulnerability in the SubDomains.delete API command that allows authenticated customers to delete reseller-provisioned main domains by supplying a main domain id. Attackers can bypass the web UI restriction to remove domains, orphan vhost, DNS and subdomain records, and drive subdomains_used below zero to gain extra subdomain allowance. |
| Xen Orchestra before 6.9.0 contains an authorization bypass vulnerability in the xo-server user.set API method that allows low-privileged authenticated users to modify other users' preferences by supplying an arbitrary target user id. Attackers can delete the preferences.otp TOTP secret to disable two-factor authentication, corrupt it to block logins, or overwrite stored xsCredentials and sshKeys. |
| Stirling-PDF from 2.13.2 through 3.2.0 contains an incomplete denylist in DatabaseService.validateSqlContent() that allows administrators to bypass H2 import restrictions using CREATE OR REPLACE ALIAS. Authenticated administrators can upload a crafted SQL backup to the import-database endpoint, where RUNSCRIPT defines H2 Java function aliases and restores Java-method execution. |
| A failure has been identified in the SNS during dynamic data files signature check.
A logic error in the signature verification routine resulting in acceptance of unauthenticated dynamic data update during Autoupdate routine. |
| An access issue was addressed with improved access controls. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to access sensitive user data. |
| The issue was addressed with improved handling of secure input state. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to access sensitive user data. |
| A buffer overflow was addressed with improved size validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to cause unexpected system termination. |
| This issue was addressed through improved state management. This issue is fixed in iOS 27 and iPadOS 27. An attacker with physical access to a locked device may be able to bypass Digital ID authentication when iPhone Mirroring is active. |
| This issue was addressed with improved validation of the caller's access. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Tahoe 26.7, visionOS 27. An app may be able to access protected user data. |
| A logic issue was addressed with improved state management. This issue is fixed in Safari 27, visionOS 27, watchOS 27. Processing maliciously crafted web content may lead to unexpected behavior. |
| An information disclosure issue was addressed with improved state management. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to access sensitive network connection information. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted image may lead to unexpected app termination. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 27 and iPadOS 27. An app may be able to access sensitive user data. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An attacker in wireless proximity may be able to cause unexpected system termination. |
| A vulnerability in the firmware upgrade functionality could allow an authenticated attacker to upload a forged firmware upgrade file, potentially compromising the device permanently. |