| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
signal: restore the override_rlimit logic
Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of
ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of
signals. However now it's enforced unconditionally, even if
override_rlimit is set. This behavior change caused production issues.
For example, if the limit is reached and a process receives a SIGSEGV
signal, sigqueue_alloc fails to allocate the necessary resources for the
signal delivery, preventing the signal from being delivered with siginfo.
This prevents the process from correctly identifying the fault address and
handling the error. From the user-space perspective, applications are
unaware that the limit has been reached and that the siginfo is
effectively 'corrupted'. This can lead to unpredictable behavior and
crashes, as we observed with java applications.
Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip
the comparison to max there if override_rlimit is set. This effectively
restores the old behavior. |
| Multiple Cisco products are affected by a vulnerability in the Snort application detection engine that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. The vulnerability is due to a flaw in the detection algorithm. An attacker could exploit this vulnerability by sending crafted packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. |
| The ngtcp2 project is an effort to implement IETF QUIC protocol in C. In affected versions acks are not validated before being written to the qlog leading to a buffer overflow. In `ngtcp2_conn::conn_recv_pkt` for an ACK, there was new logic that got added to skip `conn_recv_ack` if an ack has already been processed in the payload. However, this causes us to also skip `ngtcp2_pkt_validate_ack`. The ack which was skipped still got written to qlog. The bug occurs in `ngtcp2_qlog::write_ack_frame`. It is now possible to reach this code with an invalid ack, suppose `largest_ack=0` and `first_ack_range=15`. Subtracting `largest_ack - first_ack_range` will lead to an integer underflow which is 20 chars long. However, the ngtcp2 qlog code assumes the number written is a signed integer and only accounts for 19 characters of overhead (see `NGTCP2_QLOG_ACK_FRAME_RANGE_OVERHEAD`). Therefore, we overwrite the buffer causing a heap overflow. This is high priority and could potentially impact many users if they enable qlog. qlog is disabled by default. Due to its overhead, it is most likely used for debugging purpose, but the actual use is unknown. ngtcp2 v1.9.1 fixes the bug and users are advised to upgrade. Users unable to upgrade should not turn on qlog. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Use a cpumask to know what threads are kthreads
The start_kthread() and stop_thread() code was not always called with the
interface_lock held. This means that the kthread variable could be
unexpectedly changed causing the kthread_stop() to be called on it when it
should not have been, leading to:
while true; do
rtla timerlat top -u -q & PID=$!;
sleep 5;
kill -INT $PID;
sleep 0.001;
kill -TERM $PID;
wait $PID;
done
Causing the following OOPS:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:hrtimer_active+0x58/0x300
Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f
RSP: 0018:ffff88811d97f940 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b
RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28
RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60
R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d
R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28
FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0
Call Trace:
<TASK>
? die_addr+0x40/0xa0
? exc_general_protection+0x154/0x230
? asm_exc_general_protection+0x26/0x30
? hrtimer_active+0x58/0x300
? __pfx_mutex_lock+0x10/0x10
? __pfx_locks_remove_file+0x10/0x10
hrtimer_cancel+0x15/0x40
timerlat_fd_release+0x8e/0x1f0
? security_file_release+0x43/0x80
__fput+0x372/0xb10
task_work_run+0x11e/0x1f0
? _raw_spin_lock+0x85/0xe0
? __pfx_task_work_run+0x10/0x10
? poison_slab_object+0x109/0x170
? do_exit+0x7a0/0x24b0
do_exit+0x7bd/0x24b0
? __pfx_migrate_enable+0x10/0x10
? __pfx_do_exit+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x64/0x140
? _raw_spin_lock_irq+0x86/0xe0
do_group_exit+0xb0/0x220
get_signal+0x17ba/0x1b50
? vfs_read+0x179/0xa40
? timerlat_fd_read+0x30b/0x9d0
? __pfx_get_signal+0x10/0x10
? __pfx_timerlat_fd_read+0x10/0x10
arch_do_signal_or_restart+0x8c/0x570
? __pfx_arch_do_signal_or_restart+0x10/0x10
? vfs_read+0x179/0xa40
? ksys_read+0xfe/0x1d0
? __pfx_ksys_read+0x10/0x10
syscall_exit_to_user_mode+0xbc/0x130
do_syscall_64+0x74/0x110
? __pfx___rseq_handle_notify_resume+0x10/0x10
? __pfx_ksys_read+0x10/0x10
? fpregs_restore_userregs+0xdb/0x1e0
? fpregs_restore_userregs+0xdb/0x1e0
? syscall_exit_to_user_mode+0x116/0x130
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7ff0070eca9c
Code: Unable to access opcode bytes at 0x7ff0070eca72.
RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c
RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003
RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0
R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008
</TASK>
Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core
---[ end trace 0000000000000000 ]---
This is because it would mistakenly call kthread_stop() on a user space
thread making it "exit" before it actually exits.
Since kthread
---truncated--- |
| A vulnerability was found in Undertow, where the chunked response hangs after the body was flushed. The response headers and body were sent but the client would continue waiting as Undertow does not send the expected 0\r\n termination of the chunked response. This results in uncontrolled resource consumption, leaving the server side to a denial of service attack. This happens only with Java 17 TLSv1.3 scenarios. |
| Rockwell Automation was made aware of a vulnerability that causes all affected controllers on the same network to result in a major nonrecoverable fault(MNRF/Assert). This vulnerability could be exploited by sending abnormal packets to the mDNS port. If exploited, the availability of the device would be compromised. |
| Wasmtime is a fast and secure runtime for WebAssembly. Wasmtime's filesystem sandbox implementation on Windows blocks access to special device filenames such as "COM1", "COM2", "LPT0", "LPT1", and so on, however it did not block access to the special device filenames which use superscript digits, such as "COM¹", "COM²", "LPT⁰", "LPT¹", and so on. Untrusted Wasm programs that are given access to any filesystem directory could bypass the sandbox and access devices through those special device filenames with superscript digits, and through them gain access peripheral devices connected to the computer, or network resources mapped to those devices. This can include modems, printers, network printers, and any other device connected to a serial or parallel port, including emulated USB serial ports. Patch releases for Wasmtime have been issued as 24.0.2, 25.0.3, and 26.0.1. Users of Wasmtime 23.0.x and prior are recommended to upgrade to one of these patched versions. There are no known workarounds for this issue. Affected Windows users are recommended to upgrade. |
| A flaw was found in the QEMU Virtio PCI Bindings (hw/virtio/virtio-pci.c). An improper release and use of the irqfd for vector 0 during the boot process leads to a guest triggerable crash via vhost_net_stop(). This flaw allows a malicious guest to crash the QEMU process on the host. |
| In Xpdf 4.05 (and earlier), a PDF object loop in the PDF resources leads to infinite recursion and a stack overflow. |
| Passing a heavily nested list to sqlparse.parse() leads to a Denial of Service due to RecursionError.
|
| In Xpdf 4.05 (and earlier), a PDF object loop in the attachments leads to infinite recursion and a stack overflow.
|
| In Xpdf 4.05 (and earlier), a PDF object loop in an object stream leads to infinite recursion and a stack overflow.
|
| Unitronics Vision PLC –
CWE-676: Use of Potentially Dangerous Function may allow security feature bypass |
| Use of potentially dangerous function issue exists in Ricoh Streamline NX PC Client. If this vulnerability is exploited, files in the PC where the product is installed may be altered. |
| Evmos is the Ethereum Virtual Machine (EVM) Hub on the Cosmos Network. There is an issue with how to liquid stake using Safe which itself is a contract. The bug only appears when there is a local state change together with an ICS20 transfer in the same function and uses the contract's balance, that is using the contract address as the sender parameter in an ICS20 transfer using the ICS20 precompile. This is in essence the "infinite money glitch" allowing contracts to double the supply of Evmos after each transaction.The issue has been patched in versions >=V18.1.0. |
| In Tor Arti before 1.2.3, STUB circuits incorrectly have a length of 2 (with lite vanguards), aka TROVE-2024-003. |
| gitoxide is a pure Rust implementation of Git. On Windows, fetching refs that clash with legacy device names reads from the devices, and checking out paths that clash with such names writes arbitrary data to the devices. This allows a repository, when cloned, to cause indefinite blocking or the production of arbitrary message that appear to have come from the application, and potentially other harmful effects under limited circumstances. If Windows is not used, or untrusted repositories are not cloned or otherwise used, then there is no impact. A minor degradation in availability may also be possible, such as with a very large file named `CON`, though the user could interrupt the application. |
| Requests is a HTTP library. Prior to 2.32.0, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. This vulnerability is fixed in 2.32.0. |
| Asterisk is an open source private branch exchange and telephony toolkit. After upgrade to 18.23.0, ALL unauthorized SIP requests are identified as PJSIP Endpoint of local asterisk server. This vulnerability is fixed in 18.23.1, 20.8.1, and 21.3.1.
|
| Calling Parse on a "// +build" build tag line with deeply nested expressions can cause a panic due to stack exhaustion. |
