| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add sanity check for agwidth in dbMount
The width in dmapctl of the AG is zero, it trigger a divide error when
calculating the control page level in dbAllocAG.
To avoid this issue, add a check for agwidth in dbAllocAG. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: ignore xattrs past end
Once inside 'ext4_xattr_inode_dec_ref_all' we should
ignore xattrs entries past the 'end' entry.
This fixes the following KASAN reported issue:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
Read of size 4 at addr ffff888012c120c4 by task repro/2065
CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x1fd/0x300
? tcp_gro_dev_warn+0x260/0x260
? _printk+0xc0/0x100
? read_lock_is_recursive+0x10/0x10
? irq_work_queue+0x72/0xf0
? __virt_addr_valid+0x17b/0x4b0
print_address_description+0x78/0x390
print_report+0x107/0x1f0
? __virt_addr_valid+0x17b/0x4b0
? __virt_addr_valid+0x3ff/0x4b0
? __phys_addr+0xb5/0x160
? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
kasan_report+0xcc/0x100
? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
? ext4_xattr_delete_inode+0xd30/0xd30
? __ext4_journal_ensure_credits+0x5f0/0x5f0
? __ext4_journal_ensure_credits+0x2b/0x5f0
? inode_update_timestamps+0x410/0x410
ext4_xattr_delete_inode+0xb64/0xd30
? ext4_truncate+0xb70/0xdc0
? ext4_expand_extra_isize_ea+0x1d20/0x1d20
? __ext4_mark_inode_dirty+0x670/0x670
? ext4_journal_check_start+0x16f/0x240
? ext4_inode_is_fast_symlink+0x2f2/0x3a0
ext4_evict_inode+0xc8c/0xff0
? ext4_inode_is_fast_symlink+0x3a0/0x3a0
? do_raw_spin_unlock+0x53/0x8a0
? ext4_inode_is_fast_symlink+0x3a0/0x3a0
evict+0x4ac/0x950
? proc_nr_inodes+0x310/0x310
? trace_ext4_drop_inode+0xa2/0x220
? _raw_spin_unlock+0x1a/0x30
? iput+0x4cb/0x7e0
do_unlinkat+0x495/0x7c0
? try_break_deleg+0x120/0x120
? 0xffffffff81000000
? __check_object_size+0x15a/0x210
? strncpy_from_user+0x13e/0x250
? getname_flags+0x1dc/0x530
__x64_sys_unlinkat+0xc8/0xf0
do_syscall_64+0x65/0x110
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x434ffd
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107
RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001
</TASK>
The buggy address belongs to the object at ffff888012c12000
which belongs to the cache filp of size 360
The buggy address is located 196 bytes inside of
freed 360-byte region [ffff888012c12000, ffff888012c12168)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x40(head|node=0|zone=0)
page_type: f5(slab)
raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000
head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888012c12180: fc fc fc fc fc fc fc fc fc
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: don't propagate flags on open
With the device instance lock, there is now a possibility of a deadlock:
[ 1.211455] ============================================
[ 1.211571] WARNING: possible recursive locking detected
[ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[ 1.211823] --------------------------------------------
[ 1.211936] ip/184 is trying to acquire lock:
[ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[ 1.212207]
[ 1.212207] but task is already holding lock:
[ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.212487]
[ 1.212487] other info that might help us debug this:
[ 1.212626] Possible unsafe locking scenario:
[ 1.212626]
[ 1.212751] CPU0
[ 1.212815] ----
[ 1.212871] lock(&dev->lock);
[ 1.212944] lock(&dev->lock);
[ 1.213016]
[ 1.213016] *** DEADLOCK ***
[ 1.213016]
[ 1.213143] May be due to missing lock nesting notation
[ 1.213143]
[ 1.213294] 3 locks held by ip/184:
[ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.213895]
[ 1.213895] stack backtrace:
[ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 1.213994] Call Trace:
[ 1.213995] <TASK>
[ 1.213996] dump_stack_lvl+0x8e/0xd0
[ 1.214000] print_deadlock_bug+0x28b/0x2a0
[ 1.214020] lock_acquire+0xea/0x2a0
[ 1.214027] __mutex_lock+0xbf/0xd40
[ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[ 1.214042] __dev_open+0x145/0x270
[ 1.214046] __dev_change_flags+0xb0/0x1e0
[ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev
[ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0
[ 1.214058] notifier_call_chain+0x78/0x120
[ 1.214062] netif_open+0x6d/0x90
[ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0
[ 1.214066] bond_enslave+0x64c/0x1230
[ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0
[ 1.214077] do_setlink+0x516/0x13b0
[ 1.214094] rtnl_newlink+0xaba/0xb80
[ 1.214132] rtnetlink_rcv_msg+0x440/0x490
[ 1.214144] netlink_rcv_skb+0xeb/0x120
[ 1.214150] netlink_unicast+0x1f9/0x320
[ 1.214153] netlink_sendmsg+0x346/0x3f0
[ 1.214157] __sock_sendmsg+0x86/0xb0
[ 1.214160] ____sys_sendmsg+0x1c8/0x220
[ 1.214164] ___sys_sendmsg+0x28f/0x2d0
[ 1.214179] __x64_sys_sendmsg+0xef/0x140
[ 1.214184] do_syscall_64+0xec/0x1d0
[ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 1.214191] RIP: 0033:0x7f2d1b4a7e56
Device setup:
netdevsim0 (down)
^ ^
bond netdevsim1.100@netdevsim1 allmulticast=on (down)
When we enslave the lower device (netdevsim0) which has a vlan, we
propagate vlan's allmuti/promisc flags during ndo_open. This causes
(re)locking on of the real_dev.
Propagate allmulti/promisc on flags change, not on the open. There
is a slight semantics change that vlans that are down now propagate
the flags, but this seems unlikely to result in the real issues.
Reproducer:
echo 0 1 > /sys/bus/netdevsim/new_device
dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)
ip link set dev $dev name netdevsim0
ip link set dev netdevsim0 up
ip link add link netdevsim0 name netdevsim0.100 type vlan id 100
ip link set dev netdevsim0.100 allm
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type
The access to the PCI config space via pci_ops::read and pci_ops::write is
a low-level hardware access. The functions can be accessed with disabled
interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this
purpose.
A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in
the same context as the pci_lock.
Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with
interrupts disabled.
This was reported as:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
Call Trace:
rt_spin_lock+0x4e/0x130
vmd_pci_read+0x8d/0x100 [vmd]
pci_user_read_config_byte+0x6f/0xe0
pci_read_config+0xfe/0x290
sysfs_kf_bin_read+0x68/0x90
[bigeasy: reword commit message]
Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
[kwilczynski: commit log]
[bhelgaas: add back report info from
https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix a fence leak in submit error path
In error paths, we could unref the submit without calling
drm_sched_entity_push_job(), so msm_job_free() will never get
called. Since drm_sched_job_cleanup() will NULL out the
s_fence, we can use that to detect this case.
Patchwork: https://patchwork.freedesktop.org/patch/653584/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix another leak in the submit error path
put_unused_fd() doesn't free the installed file, if we've already done
fd_install(). So we need to also free the sync_file.
Patchwork: https://patchwork.freedesktop.org/patch/653583/ |
| In the Linux kernel, the following vulnerability has been resolved:
mtk-sd: Prevent memory corruption from DMA map failure
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass
Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create
anonymous inodes with proper security context. This replaces the current
pattern of calling alloc_anon_inode() followed by
inode_init_security_anon() for creating security context manually.
This change also fixes a security regression in secretmem where the
S_PRIVATE flag was not cleared after alloc_anon_inode(), causing
LSM/SELinux checks to be bypassed for secretmem file descriptors.
As guest_memfd currently resides in the KVM module, we need to export this
symbol for use outside the core kernel. In the future, guest_memfd might be
moved to core-mm, at which point the symbols no longer would have to be
exported. When/if that happens is still unclear. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: do not index invalid pin_assignments
A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nci: uart: Set tty->disc_data only in success path
Setting tty->disc_data before opening the NCI device means we need to
clean it up on error paths. This also opens some short window if device
starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded
(broken hardware?). Close the window by exposing tty->disc_data only on
the success path, when opening of the NCI device and try_module_get()
succeeds.
The code differs in error path in one aspect: tty->disc_data won't be
ever assigned thus NULL-ified. This however should not be relevant
difference, because of "tty->disc_data=NULL" in nci_uart_tty_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: core: Release rproc->clean_table after rproc_attach() fails
When rproc->state = RPROC_DETACHED is attached to remote processor
through rproc_attach(), if rproc_handle_resources() returns failure,
then the clean table should be released, otherwise the following
memory leak will occur.
unreferenced object 0xffff000086a99800 (size 1024):
comm "kworker/u12:3", pid 59, jiffies 4294893670 (age 121.140s)
hex dump (first 32 bytes):
00 00 00 00 00 80 00 00 00 00 00 00 00 00 10 00 ............
00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 ............
backtrace:
[<000000008bbe4ca8>] slab_post_alloc_hook+0x98/0x3fc
[<000000003b8a272b>] __kmem_cache_alloc_node+0x13c/0x230
[<000000007a507c51>] __kmalloc_node_track_caller+0x5c/0x260
[<0000000037818dae>] kmemdup+0x34/0x60
[<00000000610f7f57>] rproc_boot+0x35c/0x56c
[<0000000065f8871a>] rproc_add+0x124/0x17c
[<00000000497416ee>] imx_rproc_probe+0x4ec/0x5d4
[<000000003bcaa37d>] platform_probe+0x68/0xd8
[<00000000771577f9>] really_probe+0x110/0x27c
[<00000000531fea59>] __driver_probe_device+0x78/0x12c
[<0000000080036a04>] driver_probe_device+0x3c/0x118
[<000000007e0bddcb>] __device_attach_driver+0xb8/0xf8
[<000000000cf1fa33>] bus_for_each_drv+0x84/0xe4
[<000000001a53b53e>] __device_attach+0xfc/0x18c
[<00000000d1a2a32c>] device_initial_probe+0x14/0x20
[<00000000d8f8b7ae>] bus_probe_device+0xb0/0xb4
unreferenced object 0xffff0000864c9690 (size 16): |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: core: Cleanup acquired resources when rproc_handle_resources() fails in rproc_attach()
When rproc->state = RPROC_DETACHED and rproc_attach() is used
to attach to the remote processor, if rproc_handle_resources()
returns a failure, the resources allocated by imx_rproc_prepare()
should be released, otherwise the following memory leak will occur.
Since almost the same thing is done in imx_rproc_prepare() and
rproc_resource_cleanup(), Function rproc_resource_cleanup() is able
to deal with empty lists so it is better to fix the "goto" statements
in rproc_attach(). replace the "unprepare_device" goto statement with
"clean_up_resources" and get rid of the "unprepare_device" label.
unreferenced object 0xffff0000861c5d00 (size 128):
comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............
backtrace:
[<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c
[<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0
[<00000000521c0345>] kmalloc_trace+0x40/0x158
[<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8
[<000000002815755e>] imx_rproc_prepare+0xe0/0x180
[<0000000003f61b4e>] rproc_boot+0x2ec/0x528
[<00000000e7e994ac>] rproc_add+0x124/0x17c
[<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4
[<00000000efc298a1>] platform_probe+0x68/0xd8
[<00000000110be6fe>] really_probe+0x110/0x27c
[<00000000e245c0ae>] __driver_probe_device+0x78/0x12c
[<00000000f61f6f5e>] driver_probe_device+0x3c/0x118
[<00000000a7874938>] __device_attach_driver+0xb8/0xf8
[<0000000065319e69>] bus_for_each_drv+0x84/0xe4
[<00000000db3eb243>] __device_attach+0xfc/0x18c
[<0000000072e4e1a4>] device_initial_probe+0x14/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: do not ping device which has failed to load firmware
Syzkaller reports [1, 2] crashes caused by an attempts to ping
the device which has failed to load firmware. Since such a device
doesn't pass 'ieee80211_register_hw()', an internal workqueue
managed by 'ieee80211_queue_work()' is not yet created and an
attempt to queue work on it causes null-ptr-deref.
[1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff
[2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217 |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices
Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb
and 64 Kb respectively. Adjust max size definitions and return correct
EEPROM length based on device. Also prevent out-of-bound read/write. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - check record size in ims_pcu_flash_firmware()
The "len" variable comes from the firmware and we generally do
trust firmware, but it's always better to double check. If the "len"
is too large it could result in memory corruption when we do
"memcpy(fragment->data, rec->data, len);" |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
syzbot found a potential access to uninit-value in nf_flow_pppoe_proto()
Blamed commit forgot the Ethernet header.
BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27
nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xe1/0x3d0 net/netfilter/core.c:623
nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline]
nf_ingress net/core/dev.c:5742 [inline]
__netif_receive_skb_core+0x4aff/0x70c0 net/core/dev.c:5837
__netif_receive_skb_one_core net/core/dev.c:5975 [inline]
__netif_receive_skb+0xcc/0xac0 net/core/dev.c:6090
netif_receive_skb_internal net/core/dev.c:6176 [inline]
netif_receive_skb+0x57/0x630 net/core/dev.c:6235
tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485
tun_get_user+0x4ee0/0x6b40 drivers/net/tun.c:1938
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1984
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xb4b/0x1580 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_serial: Fix race condition in TTY wakeup
A race condition occurs when gs_start_io() calls either gs_start_rx() or
gs_start_tx(), as those functions briefly drop the port_lock for
usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear
port.tty and port_usb, respectively.
Use the null-safe TTY Port helper function to wake up TTY.
Example
CPU1: CPU2:
gserial_connect() // lock
gs_close() // await lock
gs_start_rx() // unlock
usb_ep_queue()
gs_close() // lock, reset port.tty and unlock
gs_start_rx() // lock
tty_wakeup() // NPE |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: Fix stack memory use after return in raid1_reshape
In the raid1_reshape function, newpool is
allocated on the stack and assigned to conf->r1bio_pool.
This results in conf->r1bio_pool.wait.head pointing
to a stack address.
Accessing this address later can lead to a kernel panic.
Example access path:
raid1_reshape()
{
// newpool is on the stack
mempool_t newpool, oldpool;
// initialize newpool.wait.head to stack address
mempool_init(&newpool, ...);
conf->r1bio_pool = newpool;
}
raid1_read_request() or raid1_write_request()
{
alloc_r1bio()
{
mempool_alloc()
{
// if pool->alloc fails
remove_element()
{
--pool->curr_nr;
}
}
}
}
mempool_free()
{
if (pool->curr_nr < pool->min_nr) {
// pool->wait.head is a stack address
// wake_up() will try to access this invalid address
// which leads to a kernel panic
return;
wake_up(&pool->wait);
}
}
Fix:
reinit conf->r1bio_pool.wait after assigning newpool. |
| In the Linux kernel, the following vulnerability has been resolved:
raid10: cleanup memleak at raid10_make_request
If raid10_read_request or raid10_write_request registers a new
request and the REQ_NOWAIT flag is set, the code does not
free the malloc from the mempool.
unreferenced object 0xffff8884802c3200 (size 192):
comm "fio", pid 9197, jiffies 4298078271
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 88 41 02 00 00 00 00 00 .........A......
08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc c1a049a2):
__kmalloc+0x2bb/0x450
mempool_alloc+0x11b/0x320
raid10_make_request+0x19e/0x650 [raid10]
md_handle_request+0x3b3/0x9e0
__submit_bio+0x394/0x560
__submit_bio_noacct+0x145/0x530
submit_bio_noacct_nocheck+0x682/0x830
__blkdev_direct_IO_async+0x4dc/0x6b0
blkdev_read_iter+0x1e5/0x3b0
__io_read+0x230/0x1110
io_read+0x13/0x30
io_issue_sqe+0x134/0x1180
io_submit_sqes+0x48c/0xe90
__do_sys_io_uring_enter+0x574/0x8b0
do_syscall_64+0x5c/0xe0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
V4: changing backing tree to see if CKI tests will pass.
The patch code has not changed between any versions. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: fix uaf in nbd_genl_connect() error path
There is a use-after-free issue in nbd:
block nbd6: Receive control failed (result -104)
block nbd6: shutting down sockets
==================================================================
BUG: KASAN: slab-use-after-free in recv_work+0x694/0xa80 drivers/block/nbd.c:1022
Write of size 4 at addr ffff8880295de478 by task kworker/u33:0/67
CPU: 2 UID: 0 PID: 67 Comm: kworker/u33:0 Not tainted 6.15.0-rc5-syzkaller-00123-g2c89c1b655c0 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: nbd6-recv recv_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_dec include/linux/atomic/atomic-instrumented.h:592 [inline]
recv_work+0x694/0xa80 drivers/block/nbd.c:1022
process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:464
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
nbd_genl_connect() does not properly stop the device on certain
error paths after nbd_start_device() has been called. This causes
the error path to put nbd->config while recv_work continue to use
the config after putting it, leading to use-after-free in recv_work.
This patch moves nbd_start_device() after the backend file creation. |
