| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Block VFs from clobbering special CGX PKIND state
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/iommufd: Fix IOPF group ownership UAF
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb()
look up the dmb_node under dmb_ht_lock, drop the lock and only then
operate on the node's refcount. Nothing keeps the node alive across
that window: __dibs_lo_unregister_dmb() removes the node from the hash
table under the write lock and immediately frees it.
A concurrent final put can therefore free the node between the lookup
and the refcount operation:
CPU0 (attach) CPU1 (owner unregisters)
read_lock_bh(&dmb_ht_lock)
find dmb_node (refcnt == 1)
read_unlock_bh(&dmb_ht_lock)
refcount_dec_and_test() 1 -> 0
write_lock_bh(&dmb_ht_lock)
hash_del(&dmb_node->list)
write_unlock_bh(&dmb_ht_lock)
kfree(dmb_node)
refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free
The same window exists for the refcount_dec_and_test() calls in the
detach and unregister paths.
Close the race structurally by making hash table membership and the
refcount transitions atomic with respect to each other:
- Perform the final refcount_dec_and_test() and hash_del() in a single
dmb_ht_lock write-side critical section, in both the unregister and
the detach path. Freeing the node still happens after the lock is
dropped, which is safe because a node whose refcount reached zero has
left the hash table and can no longer be found.
- This establishes the invariant that any node found in the hash table
holds at least one reference, and that the final reference can only
be dropped under the write lock. dibs_lo_attach_dmb() can thus take
its reference with a plain refcount_inc() while still holding the
read lock; refcount_inc_not_zero() is no longer needed.
__dibs_lo_unregister_dmb() no longer touches the hash table and is
renamed to dibs_lo_free_dmb() accordingly.
Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved
the code to its current location; the race was introduced earlier by
commit c3a910f2380f ("net/smc: implement DMB-merged operations of
loopback-ism").
Tested SMC-D via ISM and dibs loopback. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix UAF when sending a message
In afs_make_call(), there's a race with async call reception and
destruction. If a call is dispatched that doesn't have call->write_iter
set (used to specify the data content for FS.StoreData), then the first
rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr.
Once rxrpc_send_data() queues the last request packet, the response could
come in at any time and cause the call to be completed and put. However,
afs_make_call() will look at the call again to see it ->write_iter should
be handled - something it's only allowed to do if it has its own ref on the
call. Whilst this is the case for synchronous calls, it isn't true for
async calls such as FS.FetchData.
There's also a potential UAF in afs_make_call() in the event that an
asynchronous call is being sent, but the call fails in some way (e.g. it
gets aborted from the server). The problem there is that afs_make_call()
tries to abort a call if the rxrpc send fails, but the asynchronous
notification from rxrpc may have caused the afs_call to be torn down.
generic/650 plays games with randomly taking CPUs offline, and can
interject a significant delay such that the call is deallocated before
afs_make_call() gets to check call->write_iter - and a UAF ensues (caught
by KASAN).
BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs]
Read of size 8 at addr ffff888035e050e8 by task fsstress/1409
Fix this by making afs_make_op_call() give the op->call its own ref rather
than transferring the caller's ref to it and then dropping the ref when
afs_make_call() returns.
This also means that the afs_make_call() func never loses its ref on the
call now. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Close speculative mem read possibility
The domain value is extracted from a given CCA or EP11 ioctl struct
when a CPRB is about to be sent. Thus this is a user controlled value.
Under some special conditions (custom device node used, administrative
load) this value is used as an array index after bounds checking, but
without speculation barrier.
Add the missing array_index_nospec() call to prevent speculative
execution where this domain value is used. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cancel SSR work items during PCI shutdown
A reboot can crash the kernel if it overlaps with WLAN firmware crash
recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown
path while freeing DMA-backed MHI contexts.
Simplified trace:
dma_free_attrs
mhi_deinit_dev_ctxt [mhi]
ath11k_pci_power_down [ath11k_pci]
ath11k_pci_shutdown [ath11k_pci]
device_shutdown
kernel_restart
On the host side, SSR is driven by the MHI RDDM callback, which queues
reset_work to perform device recovery. reset_work power-cycles the device
by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The
power-down phase deinitializes MHI and frees DMA resources.
Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR
recovery flow. As a result, the shutdown path
(ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR
recovery sequence.
Fix this by canceling SSR-related work items during PCI shutdown, marking
the device as unregistering, and serializing the RDDM callback path that
checks and queues reset_work. This ensures that no new SSR recovery work
can be queued once teardown has started, and that any in-flight recovery
work is fully synchronized before device power-down, preventing MHI
teardown and DMA resource freeing from running more than once.
Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k
devices do not queue reset_work in normal SSR flows.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: Fix race between OPP addition and lookup
A race exists between dev_pm_opp_add_dynamic() and
dev_pm_opp_find_freq_exact():
CPU0 (add) CPU1 (lookup)
------------------------------- ------------------------------
_opp_add()
mutex_lock()
list_add(&new_opp->node, head)
mutex_unlock() _opp_table_find_key()
mutex_lock()
dev_pm_opp_get(opp)
kref_get()
mutex_unlock()
kref_init(&new_opp->kref)
dev_pm_opp_put()
kref_put_mutex()
The newly added OPP is inserted into the list before its kref is
initialized. A concurrent lookup can find this OPP and increment its
reference count while it is still uninitialized, leading to refcount
corruption and a potential premature free.
Fix this by initializing ->kref and ->opp_table before making the OPP
visible via list_add(). This ensures any concurrent lookup observes a
fully initialized object.
[ Viresh: Updated commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix log flood after cmd_mbox failure
hns_roce_cmd_mbox() is the command interface between driver and
hardware. When hardware is abnormal, the unlimited error printings
after hns_roce_cmd_mbox() failure will cause log flood and even
system crash.
Replace ibdev_err() and ibdev_warn() with their ratelimited versions
in the error handling path after hns_roce_cmd_mbox() (and its wrappers
hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
The OSS sequencer processes the input MIDI bytes into a sequencer
event to be dispatched later (in snd_seq_oss_midi_putc() called from
snd_seq_oss_process_event()). When it's a SysEx data, the event
record contains data.ext.ptr pointer to the original SysEx bytes, and
the referred data is copied into the pool afterwards at dispatching.
The problem is that, if the sequencer port gets closed concurrently
before the dispatch, the OSS sequencer core also releases the
resources (in snd_seq_oss_midi_check_exit_port()), while the pending
event may hold a stale pointer, eventually leading to a UAF at a later
dispatch.
Fortunately, there is already a refcounting mechanism (snd_use_lock_t)
for the OSS MIDI device access, and for addressing the issue above, we
just need to extend the refcount until the event gets dispatched.
This patch extends snd_seq_oss_process_event() to give back the
refcount object, which is in turn released after calling the sequencer
dispatcher with the given event in the caller side.
According to the original report, KASAN report as below:
KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470
RIP: 0033:0x7f2cb66a6340
Read of size 6
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_seq_event_dup+0x40c/0x470 (?:?)
kasan_check_range+0x10c/0x1c0 (?:?)
__asan_memcpy+0x27/0x70 (?:?)
snd_seq_event_dup+0x9/0x470 (?:?)
snd_seq_client_enqueue_event+0x139/0x240 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
snd_seq_kernel_client_enqueue+0x102/0x120 (?:?)
snd_seq_oss_write+0x416/0x4e0 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
odev_write+0x3b/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
__mutex_unlock_slowpath+0x129/0x510 (?:?)
ksys_write+0xe1/0x180 (?:?)
mutex_unlock+0x16/0x20 (?:?)
odev_ioctl+0x65/0xc0 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix page fragment cache leak in error path
In nvmet_tcp_alloc_queue(), when a connection is closed during the
allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN),
the error handling jumps to out_destroy_sq and then to out_ida_remove
without draining the page fragment cache.
Although nvmet_tcp_free_cmd() is called in some error paths to release
individual page fragments, the underlying page cache reference held by
queue->pf_cache is never released. The first allocation using pf_cache
is the call to nvmet_tcp_alloc_cmd() for queue->connect, which happens
after ida_alloc() returns successfully. This results in a page leak each
time a connection fails during allocation, which could lead to memory
exhaustion over time if connections are repeatedly opened and closed.
Fix this by calling page_frag_cache_drain() before freeing the queue
structure in the out_ida_remove label. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Proper cleanup is required to ensure the MSDU is released when header
validation fails during TKIP MIC verification.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: fix vhost_get_avail_idx for a non empty ring
vhost_get_avail_idx is supposed to report whether it has updated
vq->avail_idx. Instead, it returns whether all entries have been
consumed, which is usually the same. But not always - in
drivers/vhost/net.c and when mergeable buffers have been enabled, the
driver checks whether the combined entries are big enough to store an
incoming packet. If not, the driver re-enables notifications with
available entries still in the ring. The incorrect return value from
vhost_get_avail_idx propagates through vhost_enable_notify and causes
the host to livelock if the guest is not making progress, as vhost will
immediately disable notifications and retry using the available entries.
This goes back to commit d3bb267bbdcb ("vhost: cache avail index in
vhost_enable_notify()") which changed vhost_enable_notify() to compare
the freshly read avail index against vq->last_avail_idx instead of the
previously cached vq->avail_idx. Commit 7ad472397667 ("vhost: move
smp_rmb() into vhost_get_avail_idx()") then carried over the same
comparison when refactoring vhost_enable_notify() to call the unified
vhost_get_avail_idx().
The obvious fix is to make vhost_get_avail_idx do what the comment
says it does and report whether new entries have been added. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate fast symlink target during inode read
ocfs2_validate_inode_block() already rejects several inconsistent
self-contained dinodes before they are exposed to the rest of the
filesystem. Fast symlinks need the same treatment.
A zero-cluster symlink is treated as a fast symlink and later read through
page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses
strnlen() on the inline payload and then copies len + 1 bytes into the
folio. If a corrupt dinode stores an i_size that does not fit the inline
area or omits the terminating NUL at i_size, that copy reads past the end
of the inode block buffer.
Reject zero-cluster symlink dinodes whose i_size exceeds the inline
fast-symlink capacity or whose inline payload is not NUL-terminated
exactly at i_size when the inode block is validated. This keeps malformed
fast symlinks from reaching the read path.
Validation reproduced this kernel report:
KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0
RIP: 0033:0x7f5c6d859aa7
Read of size 3905
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x19f/0x330 (?:?)
kasan_report+0xe0/0x110 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
__asan_memcpy+0x23/0x60 (?:?)
filemap_read_folio+0x27/0xe0 (?:?)
filemap_read_folio+0x35/0xe0 (?:?)
do_read_cache_folio+0x138/0x230 (?:?)
__page_get_link+0x26/0x110 (?:?)
page_get_link+0x2e/0x70 (?:?)
vfs_readlink+0x15e/0x250 (?:?)
touch_atime+0x4d/0x370 (?:?)
do_readlinkat+0x186/0x200 (?:?)
do_user_addr_fault+0x65a/0x890 (?:?)
__x64_sys_readlink+0x46/0x60 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |