| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Git for Windows, the Windows port of Git, no localized messages are shipped with the installer. As a consequence, Git is expected not to localize messages at all, and skips the gettext initialization. However, due to a change in MINGW-packages, the `gettext()` function's implicit initialization no longer uses the runtime prefix but uses the hard-coded path `C:\mingw64\share\locale` to look for localized messages. And since any authenticated user has the permission to create folders in `C:\` (and since `C:\mingw64` does not typically exist), it is possible for low-privilege users to place fake messages in that location where `git.exe` will pick them up in version 2.40.1.
This vulnerability is relatively hard to exploit and requires social engineering. For example, a legitimate message at the end of a clone could be maliciously modified to ask the user to direct their web browser to a malicious website, and the user might think that the message comes from Git and is legitimate. It does require local write access by the attacker, though, which makes this attack vector less likely. Version 2.40.1 contains a patch for this issue. Some workarounds are available. Do not work on a Windows machine with shared accounts, or alternatively create a `C:\mingw64` folder and leave it empty. Users who have administrative rights may remove the permission to create folders in `C:\`. |
| Git is a revision control system. Prior to versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1, by feeding specially crafted input to `git apply --reject`, a path outside the working tree can be overwritten with partially controlled contents (corresponding to the rejected hunk(s) from the given patch). A fix is available in versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1. As a workaround, avoid using `git apply` with `--reject` when applying patches from an untrusted source. Use `git apply --stat` to inspect a patch before applying; avoid applying one that create a conflict where a link corresponding to the `*.rej` file exists. |
| NULL Pointer Dereference allows attackers to cause a denial of service (or application crash). This only applies when lxml is used together with libxml2 2.9.10 through 2.9.14. libxml2 2.9.9 and earlier are not affected. It allows triggering crashes through forged input data, given a vulnerable code sequence in the application. The vulnerability is caused by the iterwalk function (also used by the canonicalize function). Such code shouldn't be in wide-spread use, given that parsing + iterwalk would usually be replaced with the more efficient iterparse function. However, an XML converter that serialises to C14N would also be vulnerable, for example, and there are legitimate use cases for this code sequence. If untrusted input is received (also remotely) and processed via iterwalk function, a crash can be triggered. |
| Buffer overflow vulnerabilities exist in FRRouting through 8.1.0 due to the use of strdup with a non-zero-terminated binary string in isis_nb_notifications.c. |
| calibre before 5.32.0 contains a regular expression that is vulnerable to ReDoS (Regular Expression Denial of Service) in html_preprocess_rules in ebooks/conversion/preprocess.py. |
| The cgi gem before 0.1.0.2, 0.2.x before 0.2.2, and 0.3.x before 0.3.5 for Ruby allows HTTP response splitting. This is relevant to applications that use untrusted user input either to generate an HTTP response or to create a CGI::Cookie object. |
| An arbitrary file copy vulnerability in mod_copy in ProFTPD up to 1.3.5b allows for remote code execution and information disclosure without authentication, a related issue to CVE-2015-3306. |
| An XSS issue was discovered in Roundcube Webmail before 1.2.13, 1.3.x before 1.3.16, and 1.4.x before 1.4.10. The attacker can send a plain text e-mail message, with JavaScript in a link reference element that is mishandled by linkref_addindex in rcube_string_replacer.php. |
| Roundcube before 1.3.17 and 1.4.x before 1.4.12 is prone to a potential SQL injection via search or search_params. |
| In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, due to a code logic error, filtering functions such as filter_var when validating URLs (FILTER_VALIDATE_URL) for certain types of URLs the function will result in invalid user information (username + password part of URLs) being treated as valid user information. This may lead to the downstream code accepting invalid URLs as valid and parsing them incorrectly. |
| When the Node.js policy feature checks the integrity of a resource against a trusted manifest, the application can intercept the operation and return a forged checksum to the node's policy implementation, thus effectively disabling the integrity check.
Impacts:
This vulnerability affects all users using the experimental policy mechanism in all active release lines: 18.x and, 20.x.
Please note that at the time this CVE was issued, the policy mechanism is an experimental feature of Node.js. |
| Smarty is a template engine for PHP. In affected versions smarty did not properly escape javascript code. An attacker could exploit this vulnerability to execute arbitrary JavaScript code in the context of the user's browser session. This may lead to unauthorized access to sensitive user data, manipulation of the web application's behavior, or unauthorized actions performed on behalf of the user. Users are advised to upgrade to either version 3.1.48 or to 4.3.1 to resolve this issue. There are no known workarounds for this vulnerability. |
| GQUIC dissector crash in Wireshark 4.0.0 to 4.0.4 and 3.6.0 to 3.6.12 allows denial of service via packet injection or crafted capture file |
| LISP dissector large loop in Wireshark 4.0.0 to 4.0.4 and 3.6.0 to 3.6.12 allows denial of service via packet injection or crafted capture file |
| RPCoRDMA dissector crash in Wireshark 4.0.0 to 4.0.4 and 3.6.0 to 3.6.12 allows denial of service via packet injection or crafted capture file |
| A vulnerability was found in the avahi library. This flaw allows an unprivileged user to make a dbus call, causing the avahi daemon to crash. |
| Python 3.9.x before 3.9.16 and 3.10.x before 3.10.9 on Linux allows local privilege escalation in a non-default configuration. The Python multiprocessing library, when used with the forkserver start method on Linux, allows pickles to be deserialized from any user in the same machine local network namespace, which in many system configurations means any user on the same machine. Pickles can execute arbitrary code. Thus, this allows for local user privilege escalation to the user that any forkserver process is running as. Setting multiprocessing.util.abstract_sockets_supported to False is a workaround. The forkserver start method for multiprocessing is not the default start method. This issue is Linux specific because only Linux supports abstract namespace sockets. CPython before 3.9 does not make use of Linux abstract namespace sockets by default. Support for users manually specifying an abstract namespace socket was added as a bugfix in 3.7.8 and 3.8.3, but users would need to make specific uncommon API calls in order to do that in CPython before 3.9. |
| A vulnerability was found in Exim and classified as problematic. This issue affects some unknown processing of the component Regex Handler. The manipulation leads to use after free. The name of the patch is 4e9ed49f8f12eb331b29bd5b6dc3693c520fddc2. It is recommended to apply a patch to fix this issue. The identifier VDB-211073 was assigned to this vulnerability. |
| Infinite loop in the F5 Ethernet Trailer protocol dissector in Wireshark 3.6.0 to 3.6.7 and 3.4.0 to 3.4.15 allows denial of service via packet injection or crafted capture file |
| # Possible XSS Vulnerability in Rails::Html::SanitizerThere is a possible XSS vulnerability with certain configurations of Rails::Html::Sanitizer.This vulnerability has been assigned the CVE identifier CVE-2022-32209.Versions Affected: ALLNot affected: NONEFixed Versions: v1.4.3## ImpactA possible XSS vulnerability with certain configurations of Rails::Html::Sanitizer may allow an attacker to inject content if the application developer has overridden the sanitizer's allowed tags to allow both `select` and `style` elements.Code is only impacted if allowed tags are being overridden. This may be done via application configuration:```ruby# In config/application.rbconfig.action_view.sanitized_allowed_tags = ["select", "style"]```see https://guides.rubyonrails.org/configuring.html#configuring-action-viewOr it may be done with a `:tags` option to the Action View helper `sanitize`:```<%= sanitize @comment.body, tags: ["select", "style"] %>```see https://api.rubyonrails.org/classes/ActionView/Helpers/SanitizeHelper.html#method-i-sanitizeOr it may be done with Rails::Html::SafeListSanitizer directly:```ruby# class-level optionRails::Html::SafeListSanitizer.allowed_tags = ["select", "style"]```or```ruby# instance-level optionRails::Html::SafeListSanitizer.new.sanitize(@article.body, tags: ["select", "style"])```All users overriding the allowed tags by any of the above mechanisms to include both "select" and "style" should either upgrade or use one of the workarounds immediately.## ReleasesThe FIXED releases are available at the normal locations.## WorkaroundsRemove either `select` or `style` from the overridden allowed tags.## CreditsThis vulnerability was responsibly reported by [windshock](https://hackerone.com/windshock?type=user). |
