| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Curl versions 7.33.0 through 7.61.1 are vulnerable to a buffer overrun in the SASL authentication code that may lead to denial of service. |
| Curl versions 7.14.1 through 7.61.1 are vulnerable to a heap-based buffer over-read in the tool_msgs.c:voutf() function that may result in information exposure and denial of service. |
| The URL percent-encoding decode function in libcurl before 7.51.0 is called `curl_easy_unescape`. Internally, even if this function would be made to allocate a unscape destination buffer larger than 2GB, it would return that new length in a signed 32 bit integer variable, thus the length would get either just truncated or both truncated and turned negative. That could then lead to libcurl writing outside of its heap based buffer. |
| curl before version 7.61.1 is vulnerable to a buffer overrun in the NTLM authentication code. The internal function Curl_ntlm_core_mk_nt_hash multiplies the length of the password by two (SUM) to figure out how large temporary storage area to allocate from the heap. The length value is then subsequently used to iterate over the password and generate output into the allocated storage buffer. On systems with a 32 bit size_t, the math to calculate SUM triggers an integer overflow when the password length exceeds 2GB (2^31 bytes). This integer overflow usually causes a very small buffer to actually get allocated instead of the intended very huge one, making the use of that buffer end up in a heap buffer overflow. (This bug is almost identical to CVE-2017-8816.) |
| libcurl versions from 7.36.0 to before 7.64.0 is vulnerable to a heap buffer out-of-bounds read. The function handling incoming NTLM type-2 messages (`lib/vauth/ntlm.c:ntlm_decode_type2_target`) does not validate incoming data correctly and is subject to an integer overflow vulnerability. Using that overflow, a malicious or broken NTLM server could trick libcurl to accept a bad length + offset combination that would lead to a buffer read out-of-bounds. |
| libcurl versions from 7.36.0 to before 7.64.0 are vulnerable to a stack-based buffer overflow. The function creating an outgoing NTLM type-3 header (`lib/vauth/ntlm.c:Curl_auth_create_ntlm_type3_message()`), generates the request HTTP header contents based on previously received data. The check that exists to prevent the local buffer from getting overflowed is implemented wrongly (using unsigned math) and as such it does not prevent the overflow from happening. This output data can grow larger than the local buffer if very large 'nt response' data is extracted from a previous NTLMv2 header provided by the malicious or broken HTTP server. Such a 'large value' needs to be around 1000 bytes or more. The actual payload data copied to the target buffer comes from the NTLMv2 type-2 response header. |
| libcurl versions from 7.34.0 to before 7.64.0 are vulnerable to a heap out-of-bounds read in the code handling the end-of-response for SMTP. If the buffer passed to `smtp_endofresp()` isn't NUL terminated and contains no character ending the parsed number, and `len` is set to 5, then the `strtol()` call reads beyond the allocated buffer. The read contents will not be returned to the caller. |
| A flaw was found in Keycloak. The User-Managed Access (UMA) 2.0 Protection API endpoint for permission tickets fails to enforce the `uma_protection` role check. This allows any authenticated user with a token issued for a resource server client, even without the `uma_protection` role, to enumerate all permission tickets in the system. This vulnerability partial leads to information disclosure. |
| Exposure of Sensitive Information in Shared Microarchitectural Structures during Transient Execution for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.16.11, a bug in a mod_auth_openidc results in disclosure of protected content to unauthenticated users. The conditions for disclosure are an OIDCProviderAuthRequestMethod POST, a valid account, and there mustn't be any application-level gateway (or load balancer etc) protecting the server. When you request a protected resource, the response includes the HTTP status, the HTTP headers, the intended response (the self-submitting form), and the protected resource (with no headers). This is an example of a request for a protected resource, including all the data returned. In the case where mod_auth_openidc returns a form, it has to return OK from check_userid so as not to go down the error path in httpd. This means httpd will try to issue the protected resource. oidc_content_handler is called early, which has the opportunity to prevent the normal output being issued by httpd. oidc_content_handler has a number of checks for when it intervenes, but it doesn't check for this case, so the handler returns DECLINED. Consequently, httpd appends the protected content to the response. The issue has been patched in mod_auth_openidc versions >= 2.4.16.11. |
| A flaw was found in OpenShift GitOps. Namespace admins can create ArgoCD Custom Resources (CRs) that trick the system into granting them elevated permissions in other namespaces, including privileged namespaces. An authenticated attacker can then use these elevated permissions to create privileged workloads that run on master nodes, effectively giving them root access to the entire cluster. |
| A flaw was found in the Red Hat Advanced Cluster Security (RHACS) portal. When rendering a table view in the portal, for example, on any of the /main/configmanagement/* endpoints, the front-end generates a DOM table-element (id="pdf-table"). This information is then populated with unsanitized data using innerHTML. An attacker with some control over the data rendered can trigger a cross-site scripting (XSS) vulnerability. |
| Applications that use UriComponentsBuilder to parse an externally provided URL (e.g. through a query parameter) AND perform validation checks on the host of the parsed URL may be vulnerable to a open redirect https://cwe.mitre.org/data/definitions/601.html attack or to a SSRF attack if the URL is used after passing validation checks. |
| A flaw was found in the Udisks daemon, where it allows unprivileged users to create loop devices using the D-BUS system. This is achieved via the loop device handler, which handles requests sent through the D-BUS interface. As two of the parameters of this handle, it receives the file descriptor list and index specifying the file where the loop device should be backed. The function itself validates the index value to ensure it isn't bigger than the maximum value allowed. However, it fails to validate the lower bound, allowing the index parameter to be a negative value. Under these circumstances, an attacker can cause the UDisks daemon to crash or perform a local privilege escalation by gaining access to files owned by privileged users. |
| A timing-based side-channel flaw exists in the perl-Crypt-OpenSSL-RSA package, which could be sufficient to recover plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode. |
| A privilege escalation flaw from host to domain administrator was found in FreeIPA. This vulnerability is similar to CVE-2025-4404, where it fails to validate the uniqueness of the krbCanonicalName. While the previously released version added validations for the admin@REALM credential, FreeIPA still does not validate the root@REALM canonical name, which can also be used as the realm administrator's name. This flaw allows an attacker to perform administrative tasks over the REALM, leading to access to sensitive data and sensitive data exfiltration. |
| In Node.js, the `ReadFileUtf8` internal binding leaks memory due to a corrupted pointer in `uv_fs_s.file`: a UTF-16 path buffer is allocated but subsequently overwritten when the file descriptor is set. This results in an unrecoverable memory leak on every call. Repeated use can cause unbounded memory growth, leading to a denial of service.
Impact:
* This vulnerability affects APIs relying on `ReadFileUtf8` on Node.js release lines: v20 and v22. |
| A flaw in Node.js 20's HTTP parser allows improper termination of HTTP/1 headers using `\r\n\rX` instead of the required `\r\n\r\n`.
This inconsistency enables request smuggling, allowing attackers to bypass proxy-based access controls and submit unauthorized requests.
The issue was resolved by upgrading `llhttp` to version 9, which enforces correct header termination.
Impact:
* This vulnerability affects only Node.js 20.x users prior to the `llhttp` v9 upgrade. |
| rust-openssl is a set of OpenSSL bindings for the Rust programming language. In affected versions `ssl::select_next_proto` can return a slice pointing into the `server` argument's buffer but with a lifetime bound to the `client` argument. In situations where the `sever` buffer's lifetime is shorter than the `client` buffer's, this can cause a use after free. This could cause the server to crash or to return arbitrary memory contents to the client. The crate`openssl` version 0.10.70 fixes the signature of `ssl::select_next_proto` to properly constrain the output buffer's lifetime to that of both input buffers. Users are advised to upgrade. In standard usage of `ssl::select_next_proto` in the callback passed to `SslContextBuilder::set_alpn_select_callback`, code is only affected if the `server` buffer is constructed *within* the callback. |
