| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Incomplete Internal State Distinction vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX 4600 and SRX 5000 Series allows an adjacent attacker to cause a Denial of Service (DoS).
If an SRX is configured in L2 transparent mode the receipt of a specific genuine packet can cause a single Packet Processing Engines (PPE) component of the PFE to run into a loop, which in turn will render the PPE unavailable. Each packet will cause one PPE to get into a loop, leading to a gradual performance degradation until all PPEs are unavailable and all traffic processing stops. To recover the affected FPC need to be restarted.
This issue affects Juniper Networks Junos OS on SRX 4600 and SRX 5000 Series:
20.1 version 20.1R1 and later versions;
20.2 versions prior to 20.2R3-S7;
20.3 version 20.3R1 and later versions;
20.4 versions prior to 20.4R3-S7;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S3;
21.3 versions prior to 21.3R3-S3;
21.4 versions prior to 21.4R3-S1;
22.1 versions prior to 22.1R3;
22.2 versions prior to 22.2R2;
22.3 versions prior to 22.3R1-S1, 22.3R2.
|
| A Use After Free vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS Evolved on PTX10001-36MR, and PTX10004, PTX10008, PTX10016 with LC1201/1202 allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).
The process 'aftman-bt' will crash after multiple flaps on a multicast-only fast reroute (MoFRR) enabled interface. This will cause the respective FPC to stop forwarding traffic and it needs to be rebooted to restore the service.
An indication that the system experienced this issue is the following log message:
<date> <hostname> evo-aftmand-bt[<pid>]: [Error] jexpr_fdb: sanity check failed, ... , app_name L3 Mcast Routes
This issue affects Juniper Networks Junos OS Evolved on PTX10001-36MR, PTX10004, PTX10008, PTX10016 with LC1201/1202:
21.2 version 21.2R1-EVO and later versions;
21.3 version 21.3R1-EVO and later versions;
21.4 versions prior to 21.4R3-S3-EVO;
22.1 version 22.1R1-EVO and later versions;
22.2 versions prior to 22.2R3-S2-EVO;
22.3 versions prior to 22.3R3-EVO;
22.4 versions prior to 22.4R1-S2-EVO, 22.4R2-EVO.
|
| An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS on MX Series allows an unauthenticated network-based attacker to send specific packets to an Aggregated Multiservices (AMS) interface on the device, causing the packet forwarding engine (PFE) to crash, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
This issue is only triggered by packets destined to a local-interface via a service-interface (AMS). AMS is only supported on the MS-MPC, MS-MIC, and MX-SPC3 cards. This issue is not experienced on other types of interfaces or configurations. Additionally, transit traffic does not trigger this issue.
This issue affects Juniper Networks Junos OS on MX Series:
All versions prior to 19.1R3-S10;
19.2 versions prior to 19.2R3-S7;
19.3 versions prior to 19.3R3-S8;
19.4 versions prior to 19.4R3-S12;
20.2 versions prior to 20.2R3-S8;
20.4 versions prior to 20.4R3-S7;
21.1 versions prior to 21.1R3-S5;
21.2 versions prior to 21.2R3-S5;
21.3 versions prior to 21.3R3-S4;
21.4 versions prior to 21.4R3-S3;
22.1 versions prior to 22.1R3-S2;
22.2 versions prior to 22.2R3;
22.3 versions prior to 22.3R2-S1, 22.3R3;
22.4 versions prior to 22.4R1-S2, 22.4R2.
|
| An Improper Check or Handling of Exceptional Conditions vulnerability in the UTM (Unified Threat Management) Web-Filtering feature of Juniper Networks Junos OS on SRX Series causes a jbuf memory leak to occur when accessing certain websites, eventually leading to a Denial of Service (DoS) condition. Service restoration is only possible by rebooting the system.
The jbuf memory leak only occurs in SSL Proxy and UTM Web-Filtering configurations. Other products, platforms, and configurations are not affected by this vulnerability.
This issue affects Juniper Networks Junos OS on SRX Series:
22.2 versions prior to 22.2R3;
22.3 versions prior to 22.3R2-S1, 22.3R3;
22.4 versions prior to 22.4R1-S2, 22.4R2.
This issue does not affect Juniper Networks Junos OS versions prior to 22.2R2.
|
| An Improper Validation of Syntactic Correctness of Input vulnerability in Intrusion Detection and Prevention (IDP) of Juniper Networks SRX Series and MX Series allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). Continued receipt of this specific packet will cause a sustained Denial of Service condition.
On all SRX Series and MX Series platforms, where IDP is enabled and a specific malformed SSL packet is received, the SSL detector crashes leading to an FPC core.
This issue affects Juniper Networks SRX Series and MX Series prior to SigPack 3598.
In order to identify the current SigPack version, following command can be used:
user@junos# show security idp security-package-version |
|
A Missing Release of Memory after Effective Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).
PTX3000, PTX5000, QFX10000, PTX1000, PTX10002, and PTX10004, PTX10008 and PTX10016 with LC110x FPCs do not support certain flow-routes. Once a flow-route is received over an established BGP session and an attempt is made to install the resulting filter into the PFE, FPC heap memory is leaked. The FPC heap memory can be monitored using the CLI command "show chassis fpc".
The following syslog messages can be observed if the respective filter derived from a flow-route cannot be installed.
expr_dfw_sfm_range_add:661 SFM packet-length Unable to get a sfm entry for updating the hw
expr_dfw_hw_sfm_add:750 Unable to add the filter secondarymatch to the hardware
expr_dfw_base_hw_add:52 Failed to add h/w sfm data.
expr_dfw_base_hw_create:114 Failed to add h/w data.
expr_dfw_base_pfe_inst_create:241 Failed to create base inst for sfilter 0 on PFE 0 for __flowspec_default_inet__
expr_dfw_flt_inst_change:1368 Failed to create __flowspec_default_inet__ on PFE 0
expr_dfw_hw_pgm_fnum:465 dfw_pfe_inst_old not found for pfe_index 0!
expr_dfw_bp_pgm_flt_num:548 Failed to pgm bind-point in hw: generic failure
expr_dfw_bp_topo_handler:1102 Failed to program fnum.
expr_dfw_entry_process_change:679 Failed to change instance for filter __flowspec_default_inet__.
This issue affects Juniper Networks Junos OS:
on PTX1000, PTX10002, and PTX10004, PTX10008 and PTX10016 with LC110x FPCs:
* All versions prior to 20.4R3-S5;
* 21.1 versions prior to 21.1R3-S4;
* 21.2 versions prior to 21.2R3-S2;
* 21.3 versions prior to 21.3R3;
* 21.4 versions prior to 21.4R2-S2, 21.4R3;
* 22.1 versions prior to 22.1R1-S2, 22.1R2.
on PTX3000, PTX5000, QFX10000:
* All versions prior to 20.4R3-S8;
* 21.1 version 21.1R1 and later versions;
* 21.2 versions prior to 21.2R3-S6;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S4;
* 22.1 versions prior to 22.1R3-S3
* 22.2 versions prior to 22.2R3-S1
* 22.3 versions prior to 22.3R2-S2, 22.3R3
* 22.4 versions prior to 22.4R2.
|
| Apache Commons Text performs variable interpolation, allowing properties to be dynamically evaluated and expanded. The standard format for interpolation is "${prefix:name}", where "prefix" is used to locate an instance of org.apache.commons.text.lookup.StringLookup that performs the interpolation. Starting with version 1.5 and continuing through 1.9, the set of default Lookup instances included interpolators that could result in arbitrary code execution or contact with remote servers. These lookups are: - "script" - execute expressions using the JVM script execution engine (javax.script) - "dns" - resolve dns records - "url" - load values from urls, including from remote servers Applications using the interpolation defaults in the affected versions may be vulnerable to remote code execution or unintentional contact with remote servers if untrusted configuration values are used. Users are recommended to upgrade to Apache Commons Text 1.10.0, which disables the problematic interpolators by default. |
| An issue was discovered in libslax through v0.22.1. slaxIsCommentStart() in slaxlexer.c has a heap-based buffer overflow. |
| An issue was discovered in libslax through v0.22.1. slaxLexer() in slaxlexer.c has a heap-based buffer overflow. |
| An issue was discovered in libslax through v0.22.1. A NULL pointer dereference exists in the function slaxLexer() located in slaxlexer.c. It allows an attacker to cause Denial of Service. |
| An issue was discovered in libslax through v0.22.1. slaxLexer() in slaxlexer.c has a stack-based buffer overflow. |
| jquery prior to 1.9.0 allows Cross-site Scripting attacks via the load method. The load method fails to recognize and remove "<script>" HTML tags that contain a whitespace character, i.e: "</script >", which results in the enclosed script logic to be executed. |
| jQuery before 3.4.0, as used in Drupal, Backdrop CMS, and other products, mishandles jQuery.extend(true, {}, ...) because of Object.prototype pollution. If an unsanitized source object contained an enumerable __proto__ property, it could extend the native Object.prototype. |
| Juniper juniper/libslax libslax latest version (as of commit 084ddf6ab4a55b59dfa9a53f9c5f14d192c4f8e5 Commits on Sep 1, 2018) is affected by: Buffer Overflow. The impact is: remote dos. The component is: slaxlexer.c:601(funtion:slaxGetInput). The attack vector is: ./slaxproc --slax-to-xslt POC0. |
| On EX2300, EX3400, EX4600, QFX3K and QFX5K series, firewall filter configuration cannot perform packet matching on any IPv6 extension headers. This issue may allow IPv6 packets that should have been blocked to be forwarded. IPv4 packet filtering is unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS on EX and QFX series;: 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R7; 15.1X53 versions prior to 15.1X53-D234 on QFX5200/QFX5110 series; 15.1X53 versions prior to 15.1X53-D591 on EX2300/EX3400 series; 16.1 versions prior to 16.1R7; 17.1 versions prior to 17.1R2-S10, 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2. |
| An issue was discovered in Embedthis GoAhead before 4.0.1 and Appweb before 7.0.2. An HTTP POST request with a specially crafted "Host" header field may cause a NULL pointer dereference and thus cause a denial of service, as demonstrated by the lack of a trailing ']' character in an IPv6 address. |
| An issue was discovered in Embedthis GoAhead before 4.0.1 and Appweb before 7.0.2. The server mishandles some HTTP request fields associated with time, which results in a NULL pointer dereference, as demonstrated by If-Modified-Since or If-Unmodified-Since with a month greater than 11. |
| Juniper Networks CSO versions prior to 4.0.0 may log passwords in log files leading to an information disclosure vulnerability. |
| Juniper Networks Contrail Service Orchestration releases prior to 3.3.0 have Cassandra service enabled by default with hardcoded credentials. These credentials allow network based attackers unauthorized access to information stored in Cassandra. |
| A vulnerability in the Juniper Networks Junos Space Security Director allows a user who does not have SSH access to a device to reuse the URL that was created for another user to perform SSH access. Affected releases are all versions of Junos Space Security Director prior to 17.2R1. |
