| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6
io_connect_bpf_populate() fills connect.port and connect.v6_addr for
AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28
bytes.
The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which
already holds sin6_port and sin6_addr. io_connect() passes addr_len to
the socket layer unchanged.
At addr_len 24 the filter sees family AF_INET6 with port and address
zero, while the kernel connects to the real destination. A filter that
denies an IPv6 port or address is bypassed. Denying connect.port == P
rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24.
Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when
absent.
The threshold mismatch was found by an AI coding assistant (Claude Code)
comparing this hook against the net/ipv6 length checks on my
instructions; it also drafted the reproducer and this patch. I verified
the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same
code. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop exchanging reflink flags when exchanging mappings
When an exchange covers both files from offset 0 to i_disk_size,
xmi_can_exchange_reflink_flags() assumes every mapping moved and hands
the reflink flag over to the other file.
That assumption is wrong. A file can still own shared blocks past
i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size
without unmapping anything. The flag is cleared anyway, and the next
write to such a block happens in place instead of CoW, corrupting the
other file that shares it.
Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing
issue with INO1_WRITTEN") fixed one instance of this. Rather than add
another special case, stop moving the flags.
xfs_exchmaps_ensure_reflink() already sets the flag on both inodes
before the exchange, so both just keep it.
Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older
kernels may still carry them; recovery already masks them off, so they
stay in the log format mask and are ignored.
XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from
one inode to the other along with the extents. Just removing that is
not enough here: the exchange path flags both inodes up front in
xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the
inode receiving the shared extents would be left without the flag.
Set it on both inodes instead, and make sure both have a CoW fork,
since an inode with the reflink flag is expected to have one.
The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a
truncate to zero removes it. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: queue a mount only once for mount notifications
mnt_notify_add() puts a mount on notify_list. It doesn't check whether
the mount is on the list already. That's fine as long as every mount is
queued at most once per namespace_sem hold. It isn't.
propagate_umount() moves a surviving overmount off a stack of mounts
that are going away and queues it as moved. shrink_submounts() and
mark_mounts_for_expiry() call umount_tree() for several mounts under a
single namespace_sem hold. So the second umount_tree() can take down
exactly the mount the first one reparented, reparent it once more and so
end up queueing it a second time.
The second list_add_tail() cuts the mounts queued in between out of the
list while the head still points at the last of them. notify_mnt_list()
then only visits that one mount and the others are freed after the grace
period with notify_list still pointing at them. Every later mount
operation on the host walks freed memory:
BUG: KASAN: slab-use-after-free in __list_add_valid_or_report
Read of size 8 at addr ffff8881003d57e0 by task notify_dq/162
__list_add_valid_or_report+0x15c/0x1a0
mnt_add_to_ns+0x322/0x890
attach_recursive_mnt.isra.0+0xf2a/0x1a00
path_mount+0x139c/0x1d40
This needs a mount with MNT_SHRINKABLE to bind from. That's what
finish_automount() creates (submounts of NFS, AFS and CIFS and the
tracefs mount below debugfs). Bind mounts inherit the flag. A mount
namespace with a FAN_MARK_MNTNS mark does the rest and root in a user
namespace can have both.
Initialize to_notify in alloc_vfsmnt() and leave a mount alone that is
queued already. mnt_notify() looks at the state the mount has when the
list is drained so a single entry per mount is enough. The move event
for a mount that is unmounted under the same hold is lost. That's fine.
The detach is what matters. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Reject concurrent BIS listener setup
iso_sock_listen() drops the socket lock before calling iso_listen_bis()
to preserve the hdev->lock ordering. Two concurrent listen() calls on
the same broadcast socket can therefore both observe BT_BOUND. Caller
A can attach connA and release the locks, then caller B can acquire
them and attach connB before A publishes BT_LISTEN.
__iso_chan_add() checks whether connB already has a socket, but not
whether the socket already has a connection. The second attachment
overwrites iso_pi(sk)->conn, leaking the connA reference and leaving
connA->sk intact. Socket teardown follows connB, so later events on
connA can cause a stale socket access.
Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking
both the HCI device and socket locks in iso_listen_bis(). The connection
check also covers the interval between attachment and publication of
BT_LISTEN. Reject a competing setup with -EBADFD through the existing
unlock path before allocating another connection.
A recorded KASAN report from an instrumented kernel shows:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0
Call Trace:
iso_sock_hold+0x119/0x1f0
iso_conn_del+0xe4/0x270
hci_disconn_complete_evt+0x351/0x8c0
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 93:
sk_prot_alloc+0x113/0x220
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 93:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
sock_close+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on refill retry
When an XDP redirect to an AF_XDP socket fails because its RX ring is
full, the XSK core frees the buffer. During the subsequent batched refill
of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before
allocating a replacement. If that refill succeeds only partially, a WQE
left without a replacement retains its old buffer pointer.
The buffer can meanwhile be allocated to another WQE. A later refill
retry can then free the live buffer through the stale pointer and publish
the same UMEM frame twice.
Mark the WQE as released immediately after the driver-side free. The flag
is already cleared when a replacement buffer is assigned, so refill
retries no longer release stale pointers.
The failure is silent and produces no kernel warning or splat. A
standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP
traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914
packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64
ownership/double-publication errors. With this change it processed
356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events,
with no ownership or data errors. |
| A flaw was found in the OpenShift client oc. When extracting container image layers with oc image extract, the application fails to properly sanitize symbolic and hard link targets pointing to absolute paths or to sibling directories of the extraction destination. An attacker who supplies a malicious container image can exploit this vulnerability by embedding links, and a chained file entry, that reference locations outside the intended extraction directory. This allows the attacker to write attacker-controlled content to arbitrary locations on the host filesystem with the privileges of the user running the command, potentially leading to file modification outside the destination directory. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: remove stale channels from all sessions on teardown
ksmbd_sessions_deregister() removes a connection's channels from other
sessions' channel lists only while conn->binding is still set:
if (conn->binding) {
hash_for_each_safe(sessions_table, ...)
ksmbd_chann_del(conn, sess);
}
conn->binding is a transient flag: it is cleared once a binding
SESSION_SETUP completes, and also by a subsequent non-binding
SESSION_SETUP on the same connection (a reauthentication on a bound
channel, or a new SessionId==0 setup). A connection that has bound a
channel into another session's ksmbd_chann_list and then clears
conn->binding leaves that channel behind when it disconnects: the
channel, whose chann->conn points at the now freed struct ksmbd_conn,
stays on the owner session's list.
When the owning connection later tears down, the second loop
dereferences the stale channel:
xa_for_each(&sess->ksmbd_chann_list, chann_id, chann)
if (chann->conn != conn)
ksmbd_conn_set_exiting(chann->conn); /* freed */
which is a use-after-free write into the freed ksmbd_conn (the same
stale channel is also walked by show_proc_session() through /proc). The
session is leaked as well, because its channel list never empties.
Remove the conn->binding gate so a connection always removes its
channels from every session on teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix life cycle of the nested_mmus array
The nested_mmus array holds the shadow page tables that are used when
a guest is running a nested context. These structures are allocated on
VCPU_INIT for whole guest, which implies that they may have to be
relocated as the array grows.
Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and
that the allocation requires relocation, that vcpu will still be
running with a pointer to the previous structure, which will have been
freed.
Fix this by turning the array of structures to an array of pointers,
which is now allocated at VM creation, sized to the absolute maximum
that KVM can handle.
In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No
reallocation is ever performed, and the life cycle of each object is
much clearer:
- the nested_mmus array is allocated in kvm_init_nested(), and freed
in kvm_arch_destroy_vm()
- s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed
on kvm_arch_flush_shadow_all()
Finally, the freeing of vcpu->arch.vncr_array is made consistent
rather than being done on some failure paths, but not others. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range-to-eof file size exchange
Norbert Szetei posted a patch containing an incomplete description of a
bug in XFS_IOC_EXCHANGE_RANGE's TO_EOF flag. The bug tricks
exchange-range into modifying a file so that it has shared blocks
starting beyond EOF, which is never allowed because files never have
written data beyond EOF, and you can only share written data blocks.
This is key to all the incorrect behavior that follows.
Eventually I got from Norbert a description of what's going wrong:
> Fair. Here it is with physical block numbers, 4k blocks. peer is the file
> that gets rewritten and file1 is the one that ends up with the flag
> cleared.
>
> Start, nothing shared:
>
> peer size 4096 -> [100]
> file1 size 12288 -> [200] [201] [202]
> donor1 size 4096 -> [300]
> donor2 size 4096 -> [400]
>
> 1. FICLONERANGE peer's block into file1's middle slot:
>
> peer size 4096 -> [100]
> file1 size 12288 -> [200] [100] [202] reflink flag set
> ^^^^^ both files own block 100
>
> 2. XFS_IOC_EXCHANGE_RANGE file1 against donor1, file1_offset 0,
> file2_offset 8192, length 0, TO_EOF. One block is exchanged, and the sizes
> are exchanged with it:
>
> file1 size 4096 -> [200] [100] [300] reflink flag set
> ^^^^^^^^^^^ still owned, now past the size
> donor1 size 12288 -> [202]
>
> file1 says it is one block long while it still owns three. Nothing was
> unmapped. file2_offset is block 2, so this exchange cannot clear a flag.
>
> 3. XFS_IOC_EXCHANGE_RANGE file1 against donor2, both offsets 0, length 4096.
> By i_disk_size this is two one-block files exchanging everything, so
> xmi_can_exchange_reflink_flags() agrees and the flag is cleared:
>
> file1 size 4096 -> [400] [100] [300] reflink flag CLEARED
> donor2 size 4096 -> [200]
>
> Block 100 is still shared with peer.
>
> 4. pwrite(file1, 4096, 4096), which is file1's second slot, block 100.
> xfs_is_cow_inode(file1) is false, so no CoW:
>
> peer size 4096 -> [100] same block, new contents
>
> Block 100 is the only one that matters here. PoC below, it reads a file
> called peer in the current directory. The filesystem needs reflink and
> exchange-range, which mkfs.xfs 7.x turns on by default.
So yes, TO_EOF is screwing up the file size even if it's actually
exchanging the data block correctly. The following is the intended
behavior of XFS_EXCHANGE_RANGE_TO_EOF, as described by its manpage:
"Ignore the length parameter. All bytes in file1_fd from file1_offset
to EOF are moved to file2_fd, and file2's size is set to
(file2_offset+(file1_length-file1_offset)). Meanwhile, all bytes in
file2 from file2_offset to EOF are moved to file1 and file1's size is
set to (file1_offset+(file2_length-file2_offset))."
In other words, if we only exchange a portion of the file data, then we
should only exchange the portion of the file size that relates to the
exchanged data. Unfortunately, the code swaps the ondisk file size and
the incore file sizes, which is incorrect if the caller passes in a
nonzero offset.
Having confused the file sizes, the PoC uses a second exchange-range
call on what looks like a non-reflinked single-block file. Because the
file size is set incorrectly, exchange-range thinks it's exchanging the
full contents of two files and clears the reflink flag on the broken
file. That enables an extending write of the broken file to rewrite the
shared block that's just past EOF. This has become known colloquially
as refluxfs.
Once the file sizes are set correctly, the second exchange-range no
longer thinks that it's doing a full-contents swap, so it won't clear
the reflink flag on either of its file arguments.
Norbert followed up to an earlier version of this patch with a second
complaint about us not handling the i_disk_size state correctly:
> The offsets are bounded against the incore i_size but subtracted from
>
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: fix race when arming the IRQ poll worker
gpio_mpsse_irq_enable() arms the poll worker before publishing it:
schedule_work() runs before the worker is added to priv->workers. If
gpio_mpsse_disconnect() walks the list in that window it misses the
worker, and once disconnect returns, the USB core frees mpsse_priv
while the orphaned gpio_mpsse_poll() work keeps accessing it, causing
a use-after-free.
Fix this by publishing and arming the worker in one irq_spin
critical section. Teardown walks the same list under irq_spin, so a
worker found on the list is guaranteed to be armed, and
cancel_work_sync() handles it whether it is queued or running.
A worker armed after the disconnect walk would still be missed, so
also set a new priv->dying flag under irq_spin before the teardown
walk, and check it in the same critical section, freeing it via
kfree_rcu() instead when the device is going away, since kfree()
would be called with the IRQ core's raw spinlock held and may sleep
on PREEMPT_RT. schedule_work() is safe to call with irq_spin held,
and the next probe gets a fresh mpsse_priv, so the flag never needs
to be cleared.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't enable large folios on encrypted inodes
Commit 709f0f1f1bf5 ("ext4: add checks for large folio
incompatibilities when BS > PS") disables large folios at mount time
if the "encrypt" feature is set. However, enabling that feature on a
mounted filesystem circumvents that check, and writing encrypted data
results in a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000028
Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work
RIP: 0010:ext4_finish_bio+0xf7/0x3e0
Call Trace:
ext4_release_io_end+0x51/0x110
ext4_end_io_end+0x4c/0xe0
ext4_end_io_rsv_work+0xb3/0x100
Fix this by disabling large folios on encrypted inodes, as is
already done for inodes that use data journaling.
This affects all kernels between v6.19 and v7.2, but it is not needed
in v7.3, where the code was significantly refactored. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix xattr replace when multiple xattrs are packed in the same item
If we have a btrfs_dir_item item that packs multiple xattrs and then we
replace the value of one of them (with the setxattr(2) family of syscalls)
with another value of a different size, we end up not having a fully
initialized btrfs_dir_item, resulting in a corruption that the tree
checker will detect at extent buffer writeback time.
This is because in btrfs_setxattr() when we find a btrfs_dir_item with
multiple xattrs (due to the crc32c hash of their name being the same)
we delete one of the xattr items (btrfs_dir_item) and then insert a new
one, but the deletion and insertion results in shifting existing data in
the leaf and therefore when the new value of a xattr has a different size,
the new btrfs_dir_item is placed in a leaf section that was not
initialized and we only copy the value's data and set the value's length
in the new btrfs_dir_item, without setting the name, the name's length,
the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and
transaction ID.
The following script reproduces the issue:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
touch $MNT/testfile
# Add two xattrs that, on btrfs, have the same hash (crc32c) for their
# name and therefore are packed into the same btrfs_dir_item.
setfattr -n user.foobar -v 123 $MNT/testfile
setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile
# Verify the xattrs are present.
echo "xattrs before:"
getfattr --absolute-names --dump $MNT/testfile
# Now replace the value of the foobar xattr with a significantly larger
# value.
setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile
# Check the xattrs have the expected values.
echo "xattrs after:"
getfattr --absolute-names --dump $MNT/testfile
umount $MNT
Running it:
$ ./test.sh
(...)
xattrs before:
# file: /mnt/sdi/testfile
user.WvG1c1Td="qwerty"
user.foobar="123"
xattrs after:
# file: /mnt/sdi/testfile
user.WvG1c1Td="qwerty"
So the "user.foobar" xattr is missing and there was a transaction abort
when unmounting the fs with the following traces in dmesg:
$ dmesg
[869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964
[869800.159293] ------------[ cut here ]------------
[869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179
[869800.168961] Modules linked in: btrfs dm_thin_pool (...)
[869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full)
[869800.193726] Tainted: [W]=WARN
[869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs]
[869800.198985] Code: 48 8b 7b 18 (...)
[869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246
[869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000
[869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0
[869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff
[869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c
[869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069
[869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000
[869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0
[869800.233783] Call Trace:
[869800.234330] <TASK>
[869800.234791] read_extent_buffer+0x4d/0x100 [btrfs]
[869800.235898] btrfs_listxattr+0x199/0x240 [btrfs]
[869800.236912] vfs_listxattr+0x51/0
---truncated--- |
| The Advanced Twenty Seventeen WordPress plugin through 1.3.1 does not perform any capability or nonce check on the action that creates and activates its bundled child , allowing any authenticated user such as a subscriber to switch the site's active site-wide, and allowing the same action to be triggered against any logged-in user including an administrator via CSRF. |
| Web::Simple versions before 0.035 for Perl allocate a buffer sized by the Content-Length header for urlencoded body parameters.
Web::Dispatch::ParamParser::get_unpacked_body_from reads an application/x-www-form-urlencoded body using a single read call, with no cap and the return value ignored. Perl's read grows the buffer to the requested length before reading, so the declared Content-Length determines the allocation.
An attacker can trigger this through any route whose dispatch specification has a % body-parameter match, such as sub (POST + %name=), sending a Content-Length far larger than the body actually sent. No authentication is involved. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry
With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until
an MPWQE is refilled. If XSK allocation then returns -ENOMEM,
actual_wq_head is not advanced and a later NAPI poll retries the same
WQE.
mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On
retry it can therefore call xsk_buff_free() again through stale pointers
after the frames have returned to the XSK pool and been reallocated.
Set all skip_release_bitmap bits in the common error path of
mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A
successful allocation already clears the bitmap after replacing every
buffer, so retries become idempotent without changing the success path.
Fault injection forced three consecutive failures for one selected MPWQE.
Both an early allocation failure and a partial 8-of-16-buffer unwind
released the original 16 XSK buffers only once. Each error left a full
bitmap, the following NAPI retry skipped the release, and a later
successful allocation cleared it. A 20-second AF_XDP zero-copy pressure
run exercised 1,575,262 buffer allocation failures without invalid
descriptors, WQE errors, or kernel warnings. |
| The Otter Blocks WordPress plugin before 3.2.8 does not enforce its block visibility conditions when a published post is rendered through the WordPress REST API, allowing unauthenticated users to read block content that the site owner restricted to specific roles, logged-in users, the post author, categories or tags, or (on the Pro tier) Stripe purchasers. |
| The MAS Videos WordPress plugin through 1.3.4 does not perform any capability or ownership check when handling its front-end video and playlist deletion requests, and the nonce it verifies is tied only to a static action rather than to the targeted object, allowing any authenticated user with a minimal role to permanently delete arbitrary posts, pages, attachments and other content belonging to other users. |
| The News Kit Addons For Elementor WordPress plugin through 1.4.7 does not perform capability or ownership checks before updating post metadata in one of its authenticated AJAX actions, allowing users with subscriber-level access and above to write arbitrary post meta, under attacker-chosen keys, to any post including those owned by other users. This can be used to overwrite protected core metadata and tamper with content created by higher-privileged users. |
| The Pixel Tag Manager for WooCommerce WordPress plugin before 2.2.3 does not perform a capability check in one of its AJAX actions, and exposes the nonce protecting it to any user able to access the admin dashboard, allowing users with a role as low as Contributor to overwrite the Pixel Tag Manager for WooCommerce WordPress plugin before 2.2.3's tracking configuration and have arbitrary JavaScript executed in the browsers of all visitors, including administrators. |
| The GeoDirectory WordPress plugin before 2.8.194 does not verify that a referenced attachment belongs to the listing being saved, allowing users with Subscriber-level access and above to modify the title, caption, moderation status and featured flag of images belonging to other users' listings, and to claim another user's image as their own featured image. |